Synthesis of phosphorus-modified poly(styrene-co-divinylbenzene) chelating resin and its adsorption properties of uranium(VI)

A new phosphorus-modified poly(styrene-co-divinylbenzene) chelating resin (PS–N–P) was synthesized by P,P-dichlorophenylphosphine oxide modified commercially available ammoniated polystyrene beads, and characterized by Fourier transform infrared spectroscopy and elemental analysis. The adsorption properties of PS–N–P toward U(VI) from aqueous solution were evaluated using batch adsorption method. The effects of the contact time, temperature, pH and initial uranium concentration on uranium(VI) uptake were investigated. The results show that the maximum adsorption capacity (97.60 mg/g) and the maximum adsorption rate (99.72 %) were observed at the pH 5.0 and 318 K with initial U(VI) concentration 100 mg/L and adsorbent dose 1 g/L. Adsorption equilibrium was achieved in approximately 4 h. Adsorption kinetics studied by pseudo second-order model stated that the adsorption was the rate-limiting step (chemisorption). U(VI) adsorption was found to barely decrease with the increase in ionic strength. Equilibrium data were best modeled by the Langmuir isotherm. The thermodynamic parameters such as ?G ₀, ?H ₀ and ?S ₀ were derived to predict the nature of adsorption. Adsorbed U(VI) ions on PS–N–P resin were desorbed effectively (about 99.39 %) by 5 % NaOH–10 % NaCl. The synthesized resin was suitable for repeated use.     

氨基膦酸树脂吸附镨的研究

氨基膦酸树脂 (简称ＡＰＡＲ)是一类性能优良的螯合树脂 ,功能基为 ＣＨ2 ＮＨＣＨ2 Ｐ(Ｏ) (ＯＨ) 2 ,由于功能基上同时含有Ｎ和Ｏ等配位原子 ,它能与多种金属离子形成比较稳定的配合物。近年来有关含磷的螯合树脂吸附金属离子的各种研究比较活跃[1～ 4] 。本文就氨基膦酸树脂在ＨＡｃ ＮａＡｃ体系中对镨 (Ⅲ )的吸附行为进行了研究。获得了诸多基本参数 ,为氨基膦酸树脂在湿法冶金中对镨离子的富集、提取等方面的应用提供了理论依据。1　实验部分1 1　试剂及仪器72 1型分光光度计 ,ＳＨＡ Ｃ水浴恒温振荡器(± 0 .1℃ ) ,ｐＨＳ 3ｃ型…     

Cerium(III) and neodymium(III) amides derived from a chelating 2-pyridyl amido ligand

Homoleptic Ce(III) and Nd(III) triamides [LnL(3)] [Ln = Ce(1) or Nd(2)] and the heterobimetallic amide-alkoxide derivatives [LnL(2)(mu-OBu(t))2M(tmeda)] [Ln = Ce, M = Na (3); Ln = Nd, M = Na (4); Ln = Nd, M = K (5)] supported by the bulky [N(SiBu(t)Me2)(2-C(5)H(3)N-6-Me)]- ligand (L-) have been successfully synthesized and characterized. Complexes 1-3 and 5 show a high activity toward the ring-opening polymerization of epsilon-caprolactone.     

A chelating resin containing S, N and O atoms: Synthesis and adsorption properties for Hg(II)

A novel chelating resin containing S, N and O atoms (PSME-EDA) was synthesized by using poly(2-hydroxyethylmercaptomethylstyrene) (PSME) and diethanolamine (EDA) as materials. Its structure was characterized by elemental analysis, Fourier transform-infrared spectra (FTIR), scanning electron microscopy (SEM) and X-ray diffraction (XRD). The adsorption of the resin for Hg²⁺ was investigated. The saturated adsorption capacity of PSME-EDA for Hg²⁺ could reach to about 1.1 mmol/g at 25 °C when the initial Hg²⁺ concentration was 0.02 mol/l. Some factors affecting the adsorption such as temperature, reaction time and ion concentration were also studied. The results showed that adsorption was controlled by liquid film diffusion. The increasing of temperature was beneficial to adsorption. The Langmuir model was better than the Freundlich model to describe the isothermal process. The values of ΔG, ΔH, and ΔS calculated at 25 °C were −7.99 kJ mol⁻¹, 22.5 kJ mol⁻¹ and 34.4 J mol⁻¹ K⁻¹, respectively. The adsorption mechanism of PSME-EDA resin for Hg(II) was confirmed by X-ray photoelectron spectroscopy (XPS).     

Preparation of chelating resin filled composite membranes and selective adsorption of Cu(II)

In this paper, chelating composite membranes were prepared with polysulfone (PS) and D418 chelating resin. The effects of process parameters such as the content of PS and D418 resin, concentration and temperature of the casting solution, and evaporation time on the structure and properties of the membranes were studied in detail. The performance of the static adsorption and the dynamic facilitated transport process were described. During the static experiments, the influences of membrane thickness, average resin particle size and the chelating reaction conditions on the adsorption rate and adsorption capacity of the membranes were discussed, respectively. The experiments of simultaneous extraction and stripping of Cu(II) were carried out in the course of the dynamic facilitated transport process.     

Chromotropic acid,a fluorogenic chelating agent for aluminium(III)

Complexation of aluminium(III) with the fluorogenic ligand chromotropic acid (4,5-dihydroxynaphthalene-2,7-disulfonic acid) has been revisited with the aim of using enhancement of the fluorescence intensity as an analytical tool. Complexation at the optimum pH4 was shown to lead to a 1:1 complex with a stability constant log ₁₁₀=18.4±0.7. The fluorogenic effect was thoroughly investigated. Nearly selective excitation of the chelate rather than the ligand could be achieved at wavelengths longer than 360 nm. For analytical purposes the main interfering ion was Ga³⁺. The strongest competing ligand was shown to be citric acid. Competitive complexation by acetate or formate ions can also make their use in a buffer at the usual concentration, 0.2 mol L^–1, questionable, whereas a 10^–2 mol L^–1 formic acid buffer was shown to be a good alternative. The calibration plot showed that the dependence of response on Al(III) concentration was linear up to 500 g L^–1; the detection limit was 0.65 g L^–1 (3SD _blank, n=10, SD=±1.4% at 10 g L^–1 and ±0.8% at 100 g L^–1). The analytical procedure was successfully applied to several samples of tap water and the results were in good agreement with those from AAS determination.     

A chelating resin containing trihydroxybenzoic acid as the functional group: synthesis and adsorption behavior for Th(IV) and U(VI) ions

A novel glycidyl methacrylate chelating resin has been synthesized through copolymerization of glycidyl methacrylate (GMA) in the presence of divinylbenzene (DVB), the resulting resin was immobilized with 3,4,5-trihydroxybenzoic acid (THBA) to give GMA/DVB/THBA chelating resin. The adsorption of Th(IV) and U(VI) on GMA/DVB/THBA adsorbent was studied as a function of initial concentration, pH, shaking time and temperature. The novel chelating resin shows a high capacity for Th(IV) and U(VI), maximum adsorption of Th(IV) and U(VI) were 56 and 83.6 mg/g, respectively. Kinetic studies showed that the adsorption follows the pseudo second order model referring to the influence of the textural properties of the resin on the rate of adsorption. Thermodynamic parameters such as ?H° and ?S° were studied and indicated an endothermic process.     

Synthesis of a new metal chelating amino acid: Terpyridyl-alanine

In past years, terpyridine-containing substances have been found useful in polynucleotide chemistry and enzymatic engineering applications. Therefore, the construction of a noncanonical amino acid with a terpyridine side chain may offer promising features for in vitro and in vivo applications, such as the direct bio-expression of proteins with these substances as building blocks. The first step towards these goals is to establish a synthetic protocol for a terpyridine analog bearing an amino acid moiety. Here, we demonstrate the synthesis of terpyridyl-alanine for the first time in five steps and an overall yield of 50%. A metal complex with Fe(II) ions was prepared by crystallization of a protected terpyridyl-alanine derivative and analyzed by X-ray crystallography. Complex formation in aqueous solution was studied by ¹H-NMR, UV/Vis and fluorescence spectroscopy. The comparison of five transition metal ions revealed a metal dependent shift in the UV-absorption and a strong fluorescence in the presence of Zn(II) ions.     

Cerium(III) extraction with oleic acid from nitrate solutions

Cerium(III) extraction with oleic acid in o-xylene from nitrate solutions was studied. The extraction mechanism and the dependence of the distribution ratio on pH and composition of the organic and aqueous phases were examined. The thermodynamic characteristics of extraction were calculated.     

The Thermokinetics of the Formation Reactions of Cerium(III) n-dodecylbenzene Sulfonate and Cerium(III) Stearate

The thermokinetics of the formation reactions of cerium(III) n-dodecylbenzene sulfonate and cerium(III) stearate are studied by using a microcalorimeter. On the basis of experimental and calculated results, three thermodynamics parameters (the activation enthalpies, the activation entropies, the activation free energies), the rate constant, three kinetic parameters (the activation energies, the pre-exponential constant and the reaction order) and the enthalpies of the reaction of preparing cerium(III) n-dodecylbenzene sulfonate in the temperature range of 20–35°C and cerium(III) stearate in the temperature range of44.6–62.8°C are obtained. The results showed that the title reactions easily took place in the studied temperature. This revised version was published online in July 2006 with corrections to the Cover Date.     

Synthesis and efficiency of an epoxy-tannin chelating resin for preconcentrating and separating various rare elements

A new epoxy-tannin chelating resin was synthesized from epoxy resin and used for the preconcentration and separation of rare elements. The acidity, rate, reuse, capacity and interference on the adsorption of ions on the resin as well as the conditions of desorption of these ions from the resin were investigated by means of inductively coupled plasma atomic emission spectrometry (ICP-AES). The composition of the resin and mechanism of enrichment for some ions were discussed. The results show that the relative standard deviations for the determination of 50 ng ml⁻¹ Ga(III), In(III), Bi(III) and Sn(IV), 10 ng ml⁻¹ La(III), Y(III), Cr(III), Ti(IV) and V(V) and 1.0 ng ml⁻¹ Be(II) were in the range of 0.5–4.5%. The contents of these elements in a sample solution from a smelter determined by the new method were in agreement with those values obtained by Zeeman atomic absorption spectrometry with an average error <3.4%.     

Supramolecular catalytic system triton X-100-polyethyleneimine-La(III) for hydrolysis of phosphonic acid esters

The self-organization of systems based on the nonionic surfactant Triton X-100, polyethyleneimine, and lanthanum ions has been investigated. The micellar solutions of Triton-X-100 alone and the Triton-X-100-polyethyleneimine binary systems inhibit the hydrolysis of phosphonic acid esters. The Triton-X-100-polyethyleneimine-La(III) ternary system with a certain component ratio exerts a considerable catalytic effect, raising the rate of the reaction by more than three orders of magnitude relative to the rate of the alkaline hydrolysis of the phosphonates.     

三氯化铈促进的反应及其在有机合成中的应用

综述了近年来三氯化铈促进的多种有机反应及其在有机合成中的应用, 其中重点讨论了三氯化铈促进下的碳—碳原子键、碳—杂原子键的形成反应以及多种保护基团的选择性脱保护反应等.     

Avenic acid,a new amino acid possessing an iron chelating activity

A new amino acid derivative possessing an iron chelating activity was isolated from root washings of water cultured $\text{Avena sativa}$ under iron deficient conditions. The structure of this compound, avenic acid A has been determined as 2(S),3′(S),3″(S)-N-[3-(3-hydroxy-3-carboxypropylamino)-3-carboxypropyl]-homoserine (1) on the basis of chemical and spectroscopic evidence.     

Synthesis and evaluation of new phosphonic,bisphosphonic and difluoromethylphosphonic acid monomers for dental application

Syntheses of novel 5-(methacryloyloxy)pentylphosphonic acid 1, 5-(methacryloyloxy)pentylidenebisphosphonic acid 2 and 1,1-difluoro-5-(methacryloyloxy)pentylphosphonic acid 3 are described. The ability of these monomers to adhere to hydroxyapatite was demonstrated using ³¹P CP-MAS NMR spectroscopy. Their copolymerization with N,N′-diethyl-1,3-bis(acrylamido)propane (DEBAAP) was investigated with photo differential scanning calorimetry. These mixtures exhibit a significantly higher reactivity than DEBAAP alone. Bisphosphonic acid 2 was shown to be significantly more reactive than monomers 1 and 3. Adhesive properties of these monomers were also studied. Adhesives based on bisphosphonic acid 2 and difluoromethylphosphonic acid 3 provide significantly higher dentin shear bond strength than the one based on phosphonic acid 1.     

Femtomolar Ln(III) affinity in peptide-based ligands containing unnatural chelating amino acids

The incorporation of unnatural chelating amino acids in short peptide sequences leads to lanthanide-binding peptides with a higher stability than sequences built exclusively from natural residues. In particular, the hexadentate peptide P(22), which incorporates two unnatural amino acids Ada(2) with aminodiacetate chelating arms, showed picomolar affinity for Tb(3+). To design peptides with higher denticity, expected to show higher affinity for Ln(3+), we synthesized the novel unnatural amino acid Ed3a(2) which carries an ethylenediamine triacetate side-chain and affords a pentadentate coordination site. The synthesis of the derivative Fmoc-Ed3a(2)(tBu)(3)-OH, with appropriate protecting groups for direct use in the solid phase peptide synthesis (Fmoc strategy), is described. The two high denticity peptides P(HD2) (Ac-Trp-Ed3a(2)-Pro-Gly-Ada(2)-Gly-NH(2)) and P(HD5) (Ac-Trp-Ada(2)-Pro-Gly-Ed3a(2)-Gly-NH(2)) led to octadentate Tb(3+) complexes with femtomolar stability in water. The position of the high denticity amino acid Ed3a(2) in the hexapeptide sequence appears to be critical for the control of the metal complex speciation. Whereas P(HD5) promotes the formation of polymetallic species in excess of Ln(3+), P(HD2) forms exclusively the mononuclear complex. The octadentate coordination of Tb(3+) by both P(HD) leads to total dehydration of the metal ion in the mononuclear complexes with long luminescence lifetimes (>2 ms). Hence, we demonstrated that unnatural amino acids carrying polyaminocarboxylate side-chains are interesting building blocks to design high affinity Ln-binding peptides. In particular the novel peptide P(HD2) forms a unique octadentate Tb(3+) complex with femtomolar stability in water and an improvement of the luminescence properties with respect to the trisaquo TbP(22) complex by a factor of 4.     

Cerium(III)-Catalyzed Synthesis of Schiff Bases: A Green Approach

The reaction of primary aromatic amines with aryl aldehydes is found to be catalyzed by cerium chloride heptahydrate under solvent-free conditions to give the corresponding Schiff bases in good yields.     

Synthesis of phosphonic acid containing thiadiazole

A series of phosphonic acid, 1,3,4‐thiadiazol‐2‐amine‐N‐alkyl have been synthesized by the reaction of 2‐amine thiadiazole, different aldehydes (or ketone), and phosphorous acid via the melting method or the solvent method. These compounds have been characterized by IR, ¹H NMR, ³¹P NMR, and elemental analysis. Results showed that compounds were reacted via the solvent method in better yields. © 2008 Wiley Periodicals, Inc. Heteroatom Chem 19:140–143, 2008; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20395