基于电子自旋弛豫全光开关中的瞬态特性

设计了基于电子自旋弛豫的透射式全光开关模犁.该光开关具有开关时间短、结构简单,光学非线性强等特点.研究在右旋圆偏振光抽运下 GaAs/AlGaAs半导体多量子阱(MQWs)中以相空间填充(PSF)和库仑屏蔽(CS)为主要因素导致的激子吸收饱和行为,计算与抽运光同向(探测光与抽运光的圆偏振方向相同)和反向(探测光与抽运光的圆偏振方向相反)的圆偏振探测光吸收系数的变化,得到两种圆偏振光差分透射率改变量随延迟时间的变化.实验采用飞秒抽运-探测技术,获得了室温下GaAs/AlGaAs多量子阱同向圆偏振探测光的透射曲线,观察到了明显的饱和吸收现象,与数值模拟的结果相符.     

Theoretical analysis of the electronic structure of truncated-pyramidal GaN/AlN quantum dots

We present a theoretical analysis of the electronic structure of GaN/AlN quantum dots (QD) with a hexagonal, truncated-pyramidal shape. We use a Fourier-transform technique that we had previously developed to calculate the 3D strain and built-in electric fields due to the QD structure. The electron and hole energy levels and wavefunctions are then calculated in the framework of an 8-band k·P model (with zero spin–orbit splitting), using an efficient plane-wave expansion method. We show that because of the large built-in piezoelectric and spontaneous polarization fields, the calculated transition energy is sensitive to variations in the wetting layer width, pyramid top diameter and also to the values chosen for the piezo-electric constants and spontaneous polarization values of bulk GaN and AlN. Numerical results are presented for a set of GaN/AlN QD structures that have been studied experimentally and described in the literature. We find that the calculated value of the ground-state optical transition energy for these structures is in good agreement with experiment.     

A long-pulse millimeter-wave free electron maser

An experimental free electron maser (FEM) facility is described which operates in the millimeter-wave regime. The experiment demonstrates that high gain and beam extraction efficiency can be obtained with low-current but high-quality electron beams. In the oscillator configuration, microwave powers of 110 kW were achieved with a 300-kV, 4-A beam, corresponding to a beam extraction efficiency of 9.2%. At low beam currents, with the system operating in the linear regime, the FEM gain curve was measured. The experiment uses a Pierce-type gun with a calculated beam emittance of 10.7-mm mrad at 300 kV and 4 A. The wiggler is of the iron permanent magnet hybrid design. The experiment is intended as a first step towards the development of continuous-wave (CW) devices that use beam energy recovery to make use of low-current, high-voltage power supplies     

Micromagnetic Simulation of Transfer Curve in Giant-Magnetoresistive Head

The transfer curve of the giant-magnetoresistive （GMR） magnetic head represents its most important property in applications, and it is calculated by the micromagnetic modeling of the free layer and the pinned layer in the heart of the GMR head. Affections of the bias hard magnetic layer and the anti-ferromagnetic pinning layer are modeled by effective magnetic fields. The simulated transfer curve agrees with experiment quite well, therefore the values of these effective magnetic fields can be determined by the model. A synthetic antiferromagnetic spin valve structure GMR head is also analyzed for comparison.     

Observation of microsphere movement driven by optical pulse

A laser beam was coupled into a tapered optical fiber tip with a diameter of about 2.6 μm, and a 46 μm diameter microsphere was propelled by the outgoing optical pulse. With the change of pulse energy from 1.35 to 7.22 μJ, the calculated average velocity of the driven microsphere varied from 0.38 to 10.68 cm/s. The scanning electron microscope images of the fiber tip show that there is no thermal damage during the experiment.     

基于CCD测量激光光束质量M~2

设计并搭建了一套基于CCD测量激光光束质量M2的系统。采用CCD测量激光光束在不同位置处的光束直径,通过非线性最小二乘法拟合测量数据获得光束腰斑直径和远场发散角,再通过公式计算得到激光光束质量M~2。利用本系统测量多组数据,并与专业M~2仪所测的数据进行对比,二者一致性较好,表明采用本实验装置测量激光光束质量M~2可以有效地替代M~2仪。     

非均匀磁场下14叶片5.8 GHz磁控管的三维数值模拟

频谱噪声的抑制问题一直是磁控管的研究重点。对14叶片5.8 GHz磁控管进行了三维建模,包括阴极、叶片、隔膜带、极靴和输出天线等。使用冷腔模拟得到了模腔体频率5.86 GHz。热腔模拟计算得到7个电子轮辐,说明管子在模正常工作。在某种极靴结构下,计算得到腔体中存在一个近似二次曲线的非均匀磁场分布。在阳极电压4.5 kV、非均匀磁场中心值0.289 T时,模拟得到输出频率5.891 GHz,阳极电流1.55 A,输出功率4.9 kW,电子效率70.3%的结果。输出频谱比较干净,抑制了非模式的工作,提高了工作效率。     

真空二极管辐射微波的机理分析

在研究真空开关的过程中,发现真空二极管能辐射出宽带微波.这种器件只由带触发装置的阴极和平板阳极组成,不存在金属波纹慢波结构,所以真空二极管的辐射机理与等离子体填充微波器件不同,不能直接套用等离子体填充微波器件的相关理论.本文描述了真空二极管产生辐射的物理过程,建立了真空二极管辐射的数学模型,通过求解波动方程得到产生辐射的色散关系,并绘制出了色散曲线.将理论分析得到的色散曲线与已经测得的微波辐射进行比较,两者能很好地符合.理论分析和实验结果表明,电子束和磁化等离子体的相互作用是真空二极管产生微波辐射的原因.     

加速器注入器中电子束束剖面直径变化过程的测量

介绍了变像管扫描相机对直线感应加速器注入器中的电子束束剖面直径的应用。获得了由注入器产生电子束 (电流 2～ 3kA)经 0 5mm厚石英玻璃产生的契伦柯夫辐射的扫描像。对拍摄到的扫描像进行了图像处理和数据分析 ,得到了电子束直径随时间变化的曲线图     

Die Feinstruktur desL-MM-Auger-Elektronenspektrums von Argon und derK-LL-Spektren von Stickstoff,Sauerstoff und Methan

The fine structure ofL-MM Auger electron spectrum of argon andK-LL spectra of the gases N₂, O₂ and CH₄ was investigated with an electrostatical spectrometer. The ionisation was caused by the continuous X-radiation from a tungsten target. From the results of Auger electron energies measured, the binding energies of the electrons of the inner shells were calculated. The results obtained with argon agreed exactly with the known values. Further it could be shown, that the value of 400 eV for the binding energy of a 1s-electron in the N₂-molecule, so far obtained, must be replaced by the value (409,4±1,0) eV. A comparison between the relative intensities of fine structure lines and the theory of the Auger process given byAsaad andBurhop could not be carried out, because the Auger electrons, having in our experiment an angular distribution relativ to the incident X-ray beam, could only be measured between an angular range of 49,3° and 61,0°.     

Local trimer orbital ordering in LiNiO2 studied by quantitative convergent beam electron diffraction technique

A local trimer orbital ordering model of LiNiO₂ was studied by means of theoretical calculation and experimental measurement of electron structure factors. Based on the trimer model, the electron structure factors were calculated by using the scattering factor of non-spherical Ni³⁺ ion. From these results, it is found that the effect of local orbital ordering on the electron structure factors of several subtle reflections, such as (202) and (107), is very large. The electron structure factors of these subtle reflections were measured by quantitative convergent beam electron diffraction method. The experimentally measured electron structure factor values of these reflections indicate that the trimer orbital ordering model is more close to the true structure of LiNiO₂.     

强流电子束聚焦数值模拟

采用粒子模拟（PIC）方法模拟了强流电子束在薄磁透镜中的聚焦。建立了强流电子束的聚焦模型,模拟了神龙一号加速器某次实验的结果,得到的模拟结果非常接近实验值,证明采用建立的PIC模型模拟强流束经过磁透镜时的聚焦是可信的。应用此模型模拟了电子束参数（入射半径、发射度、能散度、相位角等）对焦斑直径的影响, 结果表明：在模拟条件下,电子束平行入射时最佳束包络半径位于20.0~22.5 mm;发射度和能散度对焦斑直径的影响和理论公式吻合得较好;只有入射电子束包络半径和相位角匹配时才能得到小的焦斑直径。     

Beam analysis of scanning electron microscope according to the mirror effect phenomenon

In a scanning electron microscope the influence of electronic beam parameters on the electron-mirror images has been investigated. A simple theoretical model for scanning electron beam behavior in terms of beam and surface potentials is presented. The derived expression relates the scanning beam parameters and parameters of an irradiation region. Influence of a beam (the size and current), scanning potential, working distance, trapped charge and the irradiated area on electron mirror images are defined. Results show that the electron beam current has a considerable effect on the deduced mirror images in comparison with the other beam parameters. So it could be adapted for adjusting the phenomena of mirror effect. Moreover, the trapped charges have been calculated and the results examined in comparison with experimental data.     

Inverse photoemission from Cu(001)

Bremsstrahlung ultraviolet spectra for Cu(001) are calculated for a photon energy ηω=9.7 eV within the framework of an inverse one-step model of photoemission for several angles of incidence of the electron beam. The comparison with recently reported experimental data shows that both the calculated energy dispersion of the peak in the spectra and the variation of the peak intensity are in reasonable agreement with the experiment.     

强流电子束聚焦数值模拟

采用粒子模拟（PIC）方法模拟了强流电子束在薄磁透镜中的聚焦。建立了强流电子束的聚焦模型,模拟了神龙一号加速器某次实验的结果,得到的模拟结果非常接近实验值,证明采用建立的PIC模型模拟强流束经过磁透镜时的聚焦是可信的。应用此模型模拟了电子束参数（入射半径、发射度、能散度、相位角等）对焦斑直径的影响, 结果表明:在模拟条件下,电子束平行入射时最佳束包络半径位于20.0~22.5 mm;发射度和能散度对焦斑直径的影响和理论公式吻合得较好;只有入射电子束包络半径和相位角匹配时才能得到小的焦斑直径。     

介质加载复合光栅结构的色散特性研究

提出了一种用于Smith-Purcell器件的介质加载金属光栅周期慢波结构.通过采用本征函数法和单模近似法求解了介质加载金属光栅的"热"色散方程,在同步点得到了注-波互作用的一阶和二阶增长率,分析了光栅槽宽和槽深对色散特性的影响,并研究了电子注参数及其与光栅表面距离等主要参数对增长率特性的影响.结果表明:通过介质加载金属光栅有利于减弱色散,随着介质相对介电常数、槽宽度以及深度的增大,色散曲线变平缓且向低频区移动;当电子注参数变化时,一阶增长率曲线从整体上粗略地描述增长率变化趋势,二阶曲线则更精细地描述增长率相应值的变化.利用软件MAGIC对该结构的色散特性进行了二维模拟,模拟结果与理论计算值符合良好.     

All-electron study of ultra-incompressible superhard material ReB2: structural and electronic properties

This paper investigates the structural and electronic properties of rhenium diboride by first-principles calculation based on density functional theory. The obtained results show that the calculated equilibrium structural parameters of ReB2 are in excellent agreement with experimental values. The calculated bulk modulus is 361 GPa in comparison with that of the experiment. The compressibility of ReB2 is lower than that of well-known OsB2. The anisotropy of the bulk modulus is confirmed by c/a ratio as a function of pressure curve and the bulk modulus along different axes along with the electron density distribution. The high bulk modulus is attributed to the strong covalent bond between Re-d and B-p orbitals and the wider pseudogap near the Fermi level, which could be deduced from both electron charge density distribution and density of states. The band structure and density of states of ReB2 exhibit that this material presents metallic behavior. The good metallicity and ultra-incompressibility of ReB2 might suggest its potential application as pressure-proof conductors.     

Enhancement of resolution and quality of nano-hole structure on GaN substrates using the second-harmonic beam of near-infrared femtosecond laser

By using a second harmonic of near infrared femtosecond (fs) laser (λ=387 nm, 150 fs) with high NA objective lens, fabrication resolution has been greatly improved in nano-fabrication of wide band-gap semiconductor gallium nitride (GaN). We have carried out a wet-chemical-assisted fs laser ablation method, in which the laser beam is focused onto a single-crystal GaN substrate immersed in a concentrated hydrochloric (HCl) acid solution. A two-step processing involving irradiation with a fs laser beam in air followed by wet chemical treatment is also performed for comparison. In the wet-chemical-assisted ablation, theoretical diameters of ablation craters are calculated as a function of pulse energy by assuming that the reaction is based on two-photon absorption. In lower energy, the calculated curve is close to the experimental value, while the actual measured diameters in the region of higher energy are larger than calculated values. In the condition of the highest fabrication resolution, we obtained ablation craters smaller than 200 nm at full width at half maximum. We have also demonstrated the fabrication of two-dimensional (2D) periodic nanostructures on surface of a GaN substrate using the second harmonic single fs-laser pulse. Uniform ablation craters with the size as small as 410 nm in diameter are arranged with a periodicity of 1 μm. Such structures are applicable to 2D photonic crystals which improve the light extraction efficiency for blue LEDs in the near future.     

12MeV LIA轫致辐射靶面回流离子测量

 强流高功率脉冲电子束聚焦成mm量级的束斑后，打击到轫致辐射靶的过程中会产生回流离子，它会导致电子束被提前聚焦，在预定的靶面形成散焦。描述了法拉第筒对12MeV 直线感应加速器的轫致辐射靶面可能产生的离子及其参数进行的实验测量，并对实验结果进行了分析讨论。结果表明在靶前60°~70°方向未发现回流离子。     

12MeV LIA轫致辐射靶面回流离子测量

强流高功率脉冲电子束聚焦成mm量级的束斑后,打击到轫致辐射靶的过程中会产生回流离子,它会导致电子束被提前聚焦,在预定的靶面形成散焦。描述了法拉第筒对12MeV 直线感应加速器的轫致辐射靶面可能产生的离子及其参数进行的实验测量,并对实验结果进行了分析讨论。结果表明在靶前60°~70°方向未发现回流离子。