A rapid geochemical spectrophotometric determination of tungsten with dithiol

1-g sample is decomposed with nitric and hydrofluoric acids, and after evaporation of the solution to dryness the residue is dissolved in concentrated hydrochloric acid. A clear aliquot is treated with stannous chloride to inhibit interferences. The blue tungsten dithiol complex is developed at a temperature of 85 degrees over a half-hour period. The complex is extracted into 2 ml of heptane and the tungsten is determined spectrophotometrically with a sensitivity of 0.5 ppm. Fifty samples per man-day can be analysed in this manner.     

An improved colorimetric determination of vanadium in geochemical prospecting samples

The colorimetric method employed by the U.S. Geological Survey for the determination of vanadium in large numbers of geochemical prospecting samples has been examined. Use of sodium hydrogen sulphate for fusing the samples avoids precipitation of potassium phosphotungstate during colour development. Sensitivity and selectivity of the method are enhanced by extracting the phosphotungstovanadic acid into isobutyl methyl ketone.     

On the determination of molybdenum with dithiol in biological materials with high levels of copper and iron

Summary For the spectrophotometric determination of molybdenum in biological materials of high Cu and Fe contents, Mo is first separated from the other elements by extraction as the-benzoinoxime complex from strongly acid solution. It is determined by spectrophotometry using dithiol as reagent. Cu and Zn may be determined by atomic absorption measurement from the aqueous phase left from the Mo extraction. Detection limit for Mo is 0.1 g/g, mean recovery from 1 g/g 96 ± 10%.

---

Zur Bestimmung von Molybdän mit Dithiol in biologischem Material mit hohen Kupfer- und Eisengehalten

Zusammenfassung wird zunächst Mo von den anderen Elementen durch Extraktion als-Benzoinoximkomplex aus stark saurer Lösung abgetrennt. Bestimmt wird Mo durch Spektralphotometrie mit Dithiol als Reagens. Cu und Zn können in der von der Mo-Extraktion verbleibenden wäßrigen Phase durch Atomabsorptionsspektralphotometrie bestimmt werden. Die Nachweisgrenze für Mo beträgt 0,1 g/g, die Wiederfindensrate für 1 g/g 96 ± 10%.

     

Spectrophotometric determination of molybdenum and tungsten in niobium with dithiol

A new procedure for the determination of molybdenum and tungsten in niobium has been developed. The method involves the formation of the intensely colored complex of molybdenum with toluene-3,4-dithiol in an aqueous medium and its extraction into carbon tetrachloride followed by the reduction of tungsten and the formation and extraction of its complex. The recommended reagent is stable for at least 90 days. Both the molybdenum and the tungsten dithiol complexes are formed quantitatively within 5 min. Interlaboratory evaluation of the method reveals within-laboratory and between-laboratory relative standard deviations of about 1.5% and 2.9% respectively.     

Acid decomposition method for visual colorimetric determination of molybdenum in geochemical exploration

A mixture of nitric and sulphuric acids is used for the decomposition of geochemical samples. Determination of molybdenum at the μg g^?1 level is effected by visually comparing the colour of the thiocyanate complex. The acid medium seems to be well suited for the colorimetric determination of molybdenum. The same solution can be used advantageously for atomic absorption measurements for larger amounts of molybdenum. The method is suitable for batch analysis and results in a high throughput.     

Simultaneous voltammetric determination of molybdenum and copper in biological samples

 A selective, sensitive and reliable voltammetric method for the simultaneous determination of Cu and Mo is developed. Both metals form complexes with 8-hydroxyquinoline (oxine). Mo gives two reduction peaks with oxine in acidic chloride media at −0.52 V and −0.58 V, while copper exhibits only one at −0.14 V. Common heavy metals do not interfere at all. The limit of detection is 0.29 ng/ml for Mo and 0.14 ng/ml for Cu after preconcentration on the hanging mercury drop electrode for 30 s at −0.2 V. The R.S.D. at a concentration level of 10 ng/ml is 3.8% for Cu and 5.3% for Mo. The method is applied to different biological samples. Received: 15 January 1996/Revised: 11 April 1996/Accepted: 16 April 1996     

A rapid spectrophotometric method for the determination of molybdenum in industrial, environmental, biological and soil samples using 5,7-dibromo-8-hydroxyquinoline.

A very simple, ultra-sensitive and highly selective non-extractive spectrophotometric method for the determination of trace amount of molybdenum(VI) using 5,7-dibromo-8-hydroxyquinoline (DBHQ) has been developed. 5,7-Dibromo-8-hydroxyquinoline reacts in a slightly acidic solution (0.05 - 1.0 M H2SO4) with molybdenum(VI) to give a deep greenish-yellow chelate which has an absorption maximum at 401 nm. The reaction is instantaneous and the absorbance remains stable for over 24 h. The average molar absorption coefficient and Sandell's sensitivity were found to be 4.13 x 10(3) L mol(-1) cm(-1) and 7 ng cm(-2) of molybdenum(VI), respectively. Linear calibration graphs were obtained for 0.1 - 50 microg mL(-1) of molybdenum(VI). The stoichiometric composition of the chelate is 1:3 (Mo:DBHQ). A large excess of over 50 cations, anions and some common complexing agents (e.g. EDTA, oxalate, citrate, phosphate, thiourea, SCN-) do not interfere with the determination. The method was successfully used in the determination of molybdenum in several Standard Reference Materials (alloys, steels and waters) as well as in some environmental waters (inland and surface), biological samples (human blood and urine), soil samples, solution containing both molybdenum(V) and molybdenum(VI) and complex synthetic mixtures. The method has high precision and accuracy (S = +/-0.01 for 0.5 microg mL(-1)).     

Ultratrace molybdenum determination in biological samples by graphite-furnace atomic-absorption spectrometry

A method is described for molybdenum determination in human serum at sub-ng/ml levels by graphite-furnace atomic-absorption spectrometry. Sample preparation involves a nitric acid digestion, chelation with benzohydroxamic acid and extraction into hexanol. A detection limit of 0.1 ng/ml and a characteristic concentration of 0.18 ng/ml for 1% absorption can be achieved. The effectiveness of the method has been demonstrated by analysis of unspiked and spiked human serum, standard reference materials, and comparison with the results obtained by inductively-coupled plasma atomic-emission spectroscopy.     

The colorimetric determination of nickel,chromium, and manganese in steel

With the aid of the Spckkei absorptiometer the colonmetnc delerminations, of nickel (with dimethylglyoxime), chromium (with diphenylcarbazide) and manganese (after oxidation with periodate) in steel were critically sinveyed The following factors were examined. wave length of the light, concentration of the reagents, stability of the coloured solution, temperature, influence of excess non, relation of extinetion coefficient and concentration of the coloured solution, influence of Mo, V, W, Ti, Al, Co, Cu, Ni, Cr, Mn, P and Si.For each determination a recommended procedure is given, with the results of control analyses. The recommended procedures are rapid. They can be used with steels of widely differing composition. The methods are accurate within 5% of the actual Value. 1. NickleAfter neutrahsing the solution 5 ml (01 more) of concentrared ammonia (0.95) must be added. The temperature of the solution must be kept below 30° C before adding the dimethylglyoxime.The extinction coefficient is determined with light of 520 m/gm 2. ChromiumThe chromium is oxidised with hydrogen peroxide in alkaline solution. The influence of iron is ehminated by the addition of phosphoric acid. The recommended acidity is o.2 n, the quantily of diphenylcarbazide is 2 ml of a 1%'s solution in aceton. The determinations are made with a mercury lamp and filter (546 m/gm) 3. ManganeseThe solution of the sampie is boiled with ammoniumpersulphate and then oxidised with 300–500 mg of potassium periodate.The recommended acidity is 2 n, using a mixture of equal parts of sulphuric and phosphoric acids. The determinations are made with light of 520 m/gm.     

The estimation of molybdenum and of tungsten by dithiol

A method is described for the precise estimation of mg quantities of molybdenum and tungsten in plant and animal tissues, etc. Molybdenum and tungsten are separated as the corresponding cupferrates and estimated as their respective dithiol complexes by preferential formation of the molybdenum-dithiol complex in strongly acid solution in the cold, followed by the formation at pH 0.5–2.0 of the tungstendithiol complex at 90–95° C.     

The determination of tin in biological samples

A rapid method is described for the determination of tin in biological material, using¹²³Sn (T=40 m). The chemical procedure is based on the nearly quantitative extraction of tetravalent tin into toluene from an acid 1.3M iodide solution. The recovery is determined by spiking the solution with¹¹³Sn and measuring the activity of the^113mIn daughter in the counting sample. The lower limit of the determination is ?0.01μg. Results are given for standard kale powder and dried animal blood.     

Extractions with long-chain amines-III: colorimetric determination of molybdenum as thioglycollate

A highly selective and sensitive colorimetric determination of molybdenum(VI) based on its extraction with a chloroform solution of trioctylamine from solutions of acetic and thioglycollic acid (TGA) is described. The yellow chloroform extract containing the molybdenum-TGA complex is measured at 370 nm. With a single extraction it is possible to determine small amounts of molybdenum in the presence of very large concentrations of almost all metals. Only bismuth, mercury and tungsten interfere.     

Simultaneous determination of titanium and molybdenum in steel samples using derivative spectrophotometry in neutral micellar medium

A simple, selective and sensitive spectrophotometric method has been developed for the individual and simultaneous determination of Ti(IV) and Mo(VI) using resacetophenone p-hydroxybenzoylhydrazone (RAPHBH) in presence of Triton X-100, without any prior separation. Beer's law is obeyed between 0.13-1.2 microg mL-1 and 0.18-1.90 microg mL-1 concentration of Ti(IV) and Mo(VI) at 455 nm and 405 nm, respectively. The molar absorptivity and Sandell's sensitivity of the coloured complexes at pH 3.0 are 3.1x10(4) L mol-1 cm-1, 4.2x10(4) L mol-1 cm-1, and 1.6 ng cm-2, 2.3 ng cm-2 for Ti(IV) and Mo(VI), respectively. The stoichiometry of the complexes were found to be 1:2 and 1:1 (metal:ligand) for Ti(IV) and Mo(VI), respectively. These metal ions interfere with the determination of each other in zero-order spectrophotometry. The first derivative spectra of these complexes permitted a simultaneous determination of Ti(IV) and Mo(VI) at zero crossing wavelengths of 500.0 nm and 455.0 nm, respectively. The effect of foreign ions in the determination of Ti(IV) and Mo(VI) were investigated. The proposed method has been successfully applied for the determination of titanium and molybdenum in standard alloy steel, mineral and soil samples.     

The absorptiometric determination of molybdenum as molybdenum(v) thiocyanate in steel

The absorptiometric thiocyanate method for molybdenum has been thoroughly studied with regard to the role of the following reagents: HC1, H₂SO₄, HClO₄, KSCN, SnCl₂ and Fe. A method is described, which allows the determination of 0.01–10% Mo in steel with a relative standard deviation of less than 0.5%. The only interferences (slight) are Nb and the combination V and W. The method gives better than 99.8% recoveries. Results for the determination of molybdenum in standard samples are presented.     

Gallium determination in biological samples

A sensitive, simple and time-saving method has been developed for the neutron activation analysis of gallium at concentrations around 10⁻⁴ ppm in biological tissues. After a 24-hour irradiation in a thermal neutron flux of 2.8·10¹³ n·cm⁻²·s⁻¹ and a purification by ion-exchange chromatography to eliminate troublesome elements such as sodium, iron and copper, the⁷²Ga activity is measured with enough accuracy for the method to be applicable in animal physiology and clinical toxicology.     

Blister-colorimetric determination of phosphate ions in water,agricultural samples,and biological samples

A procedure was proposed for the determination of phosphate ions in a blister cell (pellet cartridge) with a dry reagent mixture. The procedure is suitable for the quantitative determination of phosphate in different samples using a dry reagent mixture in an ampule or a blister without dissolving the reagents. After an ampule or a blister cell was opened and several drops of a test liquid were added, a color developed, whose intensity was proportional to the concentration of phosphate ions in the solution. The solution was then diluted to 2 mL with water and analyzed by photometry. The composition of the mixture was determined, and the procedure for the quantitative determination of phosphate ions was proposed; the procedure involves the formation and reduction of phosphomolybdic acid and the use of auxiliary reagents. The error of the colorimetric determination of phosphate ions in aqueous solutions, soil extracts, and urine was estimated with the participation of inexperienced operators.     

The determination of molybdenum in geological samples by Neutron Activation Analysis

A metal-silicate extraction technique combined with neutron activation analysis has been developed to determine molybdenum in geological samples. The samples are equilibrated with Femetal powder at high temperatures. Molybdenum is completely extracted into the metal phase because of very reducing conditions in the furnace. The metal spherule is separated from the silicates, irradiated and dissolved in an acid solution. The molybdenum is precipitated as a sulfide and the precipitate is dissolved in aqua regia and counted on a Ge/Li/detector. The radiochemical yield is obtained by irradiation of the solution. The method avoids production of⁹⁹Mo from induced fission of²³⁵U by performing the metal-silicate separation before irradiation. The precipitation step may be necessary to remove the high background from the decay of⁵⁹Fe. Mo concentrations down to 15 ng/g have been obtained using this method.