Gas-liquid equilibria in mixtures of hydrogen and 1-methylnaphthalene

The gas-liquid equilibria in hydrogen-1-methylnaphthalene mixtures were experimentally determined at four temperatures from 190 to 430°C and seven pressures from 20 to 250 atm. The Henry constant of hydrogen dissolved in 1-methylnaphthalene was evaluated from the data. A flow apparatus was used to produce the saturated equilibrium phases. The data were found to be consistent with the Gibbs-Duhem equation integrated by the method of orthogonal collocation. Vapor pressures of 1-methylnaphthalene required for the thermodynamic consistency calculations were determined with the same apparatus. Comparison of the new mixture equilibrium data is made with the correlations of Chao and Seader (1961) and Grayson and Streed (1963).     

Vesicle shapes from molecular dynamics simulations

Lipid bilayer membranes are known to form various structures such as large sheets or vesicles. When the two leaflets of the bilayer have an equal composition, the membrane preferentially forms a flat sheet or a spherical vesicle. However, a difference in the composition of the two leaflets may result in a curved bilayer or in a wide variety of vesicle shapes. Vesicles with different shapes have already been shown in experiments and diverse vesicle shapes have been predicted theoretically from energy minimization of continuous curves. Here we present a molecular dynamics study of the effect of small changes in the phospholipid headgroups on the spontaneous curvature of the bilayer and on the resulting vesicle shape transformations. Small asymmetries in the bilayers already result in high spontaneous curvature and large vesicle deformations. Vesicle shapes that are formed include ellipsoids, discoids, pear-shaped vesicles, cup-shaped vesicles, as well as budded vesicles. Comparison of these vesicles with theoretically derived vesicle shapes shows both resemblances and differences.     

Estimating entropies from molecular dynamics simulations

While the determination of free-energy differences by MD simulation has become a standard procedure for which many techniques have been developed, total entropies and entropy differences are still hardly ever computed. An overview of techniques to determine entropy differences is given, and the accuracy and convergence behavior of five methods based on thermodynamic integration and perturbation techniques was evaluated using liquid water as a test system. Reasonably accurate entropy differences are obtained through thermodynamic integration in which many copies of a solute are desolvated. When only one solute molecule is involved, only two methods seem to yield useful results, the calculation of solute-solvent entropy through thermodynamic integration, and the calculation of solvation entropy through the temperature derivative of the corresponding free-energy difference. One-step perturbation methods seem unsuitable to obtain entropy estimates.     

Transport properties of CO2-expanded acetonitrile from molecular dynamics simulations

Carbon-dioxide-expanded liquids, which are mixtures of organic liquids and compressed CO2, are novel media used in chemical processing. The authors present a molecular simulation study of the transport properties of liquid mixtures formed by acetonitrile and carbon dioxide, in which the CO2 mole fraction is adjusted by changing the pressure, at a constant temperature of 298 K. They report values of translational diffusion coefficients, rotational correlation times, and shear viscosities of the liquids as function of CO2 mole fraction. The simulation results are in good agreement with the available experimental data for the pure components and provide interesting insights into the largely unknown properties of the mixtures, which are being recognized as important novel materials in chemical operations. We find that the calculated quantities exhibit smooth variation with composition that may be represented by simple model equations. The translational and rotational diffusion rates increase with CO2 mole fraction for both the acetonitrile and carbon dioxide components. The shear viscosity decreases with increasing amount of CO2, varying smoothly between the values of pure acetonitrile and pure carbon dioxide. Our results show that adjusting the amount of CO2 in the mixture allows the variation of transport rates by a factor of 3-4 and liquid viscosity by a factor of 8. Thus, the physical properties of the mixture may be tailored to the desired range by changes in the operating conditions of temperature and pressure.     

New ways to boost molecular dynamics simulations

We describe a set of algorithms that allow to simulate dihydrofolate reductase (DHFR, a common benchmark) with the AMBER all‐atom force field at 160 nanoseconds/day on a single Intel Core i7 5960X CPU (no graphics processing unit (GPU), 23,786 atoms, particle mesh Ewald (PME), 8.0 Å cutoff, correct atom masses, reproducible trajectory, CPU with 3.6 GHz, no turbo boost, 8 AVX registers). The new features include a mixed multiple time‐step algorithm (reaching 5 fs), a tuned version of LINCS to constrain bond angles, the fusion of pair list creation and force calculation, pressure coupling with a “densostat,” and exploitation of new CPU instruction sets like AVX2. The impact of Intel's new transactional memory, atomic instructions, and sloppy pair lists is also analyzed. The algorithms map well to GPUs and can automatically handle most Protein Data Bank (PDB) files including ligands. An implementation is available as part of the YASARA molecular modeling and simulation program from www.YASARA.org . © 2015 The Authors Journal of Computational Chemistry Published by Wiley Periodicals, Inc.     

Micellar crystals in solution from molecular dynamics simulations

Polymers with both soluble and insoluble blocks typically self-assemble into micelles, which are aggregates of a finite number of polymers where the soluble blocks shield the insoluble ones from contact with the solvent. Upon increasing concentration, these micelles often form gels that exhibit crystalline order in many systems. In this paper, we present a study of both the dynamics and the equilibrium properties of micellar crystals of triblock polymers using molecular dynamics simulations. Our results show that equilibration of single micelle degrees of freedom and crystal formation occur by polymer transfer between micelles, a process that is described by transition state theory. Near the disordered (or melting) transition, bcc lattices are favored for all triblocks studied. Lattices with fcc ordering are also found but only at lower kinetic temperatures and for triblocks with short hydrophilic blocks. Our results lead to a number of theoretical considerations and suggest a range of implications to experimental systems with a particular emphasis on Pluronic polymers.     

Insights into uranyl chemistry from molecular dynamics simulations

First-principles and purely classical molecular dynamics (MD) simulations for complexes of the uranyl ion (UO(2)(2+)) are reviewed. Validation of Car-Parrinello MD simulations for small uranyl complexes in aqueous solution is discussed. Special attention is called to the mechanism of ligand-exchange reactions at the uranyl centre and to effects of solvation and hydration on coordination and structural properties. Large-scale classical MD simulations are surveyed in the context of liquid-liquid extraction, with uranyl complexes ranging from simple hydrates to calixarenes, and nonaqueous phases from simple organic solvents and supercritical CO(2) to ionic liquids.     

Energetics and dynamics in MbCN: CN--vibrational relaxation from molecular dynamics simulations

The dynamics of the cyanide anion bound to sperm-whale myoglobin is investigated using atomistic simulations. With density-functional theory, a 2D potential energy surface for the cyanide-heme complex is calculated. Two deep minima with a stabilization energy of approximately 50 kcal/mol corresponding to two different binding orientations (Fe-CN and Fe-NC) of the ligand are found. The Fe-CN conformation is favored over Fe-NC by several kcal/mol. Mixed quantum mechanics/molecular mechanics calculations show that the binding orientation affects the bond strength of the ligand, with a significantly different bond length and a 25 cm-1 shift in the fundamental CN-frequency. For the molecular dynamics (MD) simulations, a 3-center fluctuating charge model for the Fe-CN unit is developed that captures polarization and ligand-metal charge transfer. Stability arguments based on the energetics around the active site and the CN- frequency shifts suggest that the Fe-CN conformation with epsilon-protonation of His epsilon 64 are most likely, which is in agreement with experiment. Both equilibrium and nonequilibrium MD simulations are carried out to investigate the relaxation time scale and possible relaxation pathways in bound MbCN. The nonequilibrium MD simulations with a vibrationally excited ligand reveal that vibrational relaxation takes place on a time scale of hundreds of picoseconds within the active site. This finding supports the hypothesis that the experimentally observed relaxation rate (3.6 ps) reflects the repopulation of the electronic ground state.     

n-Heptane under pressure: structure and dynamics from molecular simulations

Atomistic molecular dynamics simulations have been performed in the isothermal-isobaric ensemble to explore the phase behavior of n-heptane. Motivated by recent high-pressure spectroscopic experiments on n-heptane, the present work aims at understanding the liquid-solid and the alluded to solid-solid transitions upon increasing pressure. Starting from the stabilized solid phase at 300 K and 10 kbar, we have investigated the range of these two transitions by a gradual decrease and increase of pressure, respectively. Although the solid-liquid transition has clear signatures such as the formation of gauche defects along the molecular backbone, the present model does not show any sign of a first-order solid-solid transition at high pressures. However, interesting changes in the environment around methyl groups and in their dynamics are observed. These have been substantiated by calculations of the vibrational density of states obtained from a normal-mode analysis and from the simulation trajectory.     

Calculations of solute and solvent entropies from molecular dynamics simulations

The translational, rotational and conformational (vibrational) entropy contributions to ligand-receptor binding free energies are analyzed within the standard formulation of statistical thermodynamics. It is shown that the partitioning of the binding entropy into different components is to some extent arbitrary, but an appropriate method to calculate both translational and rotational entropy contributions to noncovalent association is by estimating the configurational volumes of the ligand in the bound and free states. Different approaches to calculating solute entropies using free energy perturbation calculations, configurational volumes based on root-mean-square fluctuations and covariance matrix based quasiharmonic analysis are illustrated for some simple molecular systems. Numerical examples for the different contributions demonstrate that theoretically derived results are well reproduced by the approximations. Calculation of solvent entropies, either using total potential energy averages or van't Hoff plots, are carried out for the case of ion solvation in water. Although convergence problems will persist for large and complex simulation systems, good agreement with experiment is obtained here for relative and absolute ion hydration entropies. We also outline how solvent and solute entropic contributions are taken into account in empirical binding free energy calculations using the linear interaction energy method. In particular it is shown that empirical scaling of the nonpolar intermolecular ligand interaction energy effectively takes into account size dependent contributions to the binding free energy.     

Interatomic Lennard-Jones potentials of linear and branched alkanes calibrated by Gibbs ensemble simulations for vapor-liquid equilibria

We propose Lennard-Jones potential parameters for interatomic interactions of linear and branched alkanes based on matching the results of Gibbs ensemble simulations of vapor-liquid equilibria to experimental data. The alkane model is similar as in the OPLS-AA, but multiple atom types for carbon based on the number of covalently bonded hydrogen atoms are necessary to accurately reproduce liquid densities and enthalpies of vaporization with the errors of 2.1% and 3.3%, respectively, for hydrocarbons of various chain lengths and structures. We find that the attraction energies of the carbon atoms are almost proportional to the number of covalent hydrogen atoms with each increasing the carbon energy parameter by approximately 0.033 kcal/mol. Though the present force field outperforms the OPLS-AA force field for alkanes we studied, systematic deviations for vapor pressures are still observed with errors of 15%-30%, and critical temperatures are slightly underestimated. We think that these shortcomings are probably due to the inadequacy of the two-parameter Lennard-Jones potential, and especially its behavior at short distances.     

Dimer models for ErbB-2/neu transmembrane domains from molecular dynamics simulations

Interest in the transmembrane receptors tyrosine kinase of the erbB family is high due to the involvement of some of the members in human cancers. The original oncogenic alleles of neu discovered in rat neuroectodermal tumors lead to single Val664Glu substitution within the predicted transmembrane domain. Identical substitution at the homologous position 659 constitutively activates the oncogenic potential of the human ErbB-2 receptor by enhanced receptor dimer formation. The precise molecular details of receptor dimerization are still unknown and to acquire more knowledge of the mechanisms involved, molecular dynamics simulations are undertaken to study transmembrane dimer association. Transmembrane helices are predicted to associate in left-handed coiled-coil structures stabilized by Glu-Glu interhelix hydrogen bonds in the mutated form. The internal dynamics reveals π helix deformations which modify the helix-helix interface. Predicted models agree with those suggested from polarized IR and magic-angle spinning NMR spectroscopy. Received: 24 April 1998 / Accepted: 17 September 1998 / Published online: 10 December 1998     

Thermal conductivity of solid argon from molecular dynamics simulations

The thermal conductivity of solid argon in the classical limit has been calculated by equilibrium molecular dynamic simulations using the Green-Kubo formalism and a Lennard-Jones interatomic potential. Contrary to previous theoretical reports, we find that the computed thermal conductivities are in good agreement with experimental data. The computed values are also in agreement with the high-temperature limit of the three-phonon scattering contribution to the thermal conductivity. We find that finite-size effects are negligible and that phonon lifetimes have two characteristic time scales, so that agreement with kinetic theory is obtained only after appropriate averaging of the calculated phonon lifetimes.     

Nucleation rate isotherms of argon from molecular dynamics simulations

We report six nucleation rate isotherms of vapor-liquid nucleation of Lennard-Jones argon from molecular dynamics simulations. The isotherms span three orders of magnitude in nucleation rates, 10(23)相似文献   

Melting of icosahedral gold nanoclusters from molecular dynamics simulations

Molecular dynamics simulations show that gold clusters with about 600-3000 atoms crystallize into a Mackay icosahedron upon cooling from the liquid. A detailed surface analysis shows that the facets on the surface of the Mackay icosahedral gold clusters soften but do not premelt below the bulk melting temperature. This softening is found to be due to the increasing mobility of vertex and edge atoms with temperature, which leads to inter-layer and intra-layer diffusion, and a shrinkage of the average facet size, so that the average shape of the cluster is nearly spherical at melting.     

A negative cooperativity mechanism of human CYP2E1 inferred from molecular dynamics simulations and free energy calculations

Human cytochrome P450 2E1 (CYP2E1) participates in the metabolism of over 2% of all the oral drugs. A hallmark peculiar feature of this enzyme is that it exhibits a pronounced negative cooperativity in substrate binding. However the mechanism by which the negative cooperativity occurs is unclear. Here, we performed molecular dynamics simulations and free energy calculations on human CYP2E1 to examine the structural differences between the substrate-free and the enzymes with one and two aniline molecules bound. Our results indicate that although the effector substrate does not bind in the active site cavity, it still can directly interact with the active site residues of human CYP2E1. The interaction of the effector substrate with the active site leads to a reorientation of active site residues, which thereby weakens the interactions of the active substrate with this site. We also identify a conserved residue T303 that plays a crucial role in the negative cooperative binding on the short-range effects. This residue is a key factor in the positioning of substrates and in proton delivery to the active site. Additionally, a long-range effect of the effector substrate is identified in which F478 is proposed to play a key role. As located in the interface between the active and effector sites, this residue structurally links the active and effector sites and is found to play a significant role in affecting substrate access and ligand positioning within the active site. In the negative cooperative binding, this residue can decrease the interactions of the active substrate with the active site by π-π stacking which then lowers the hydroxylation activity for the active substrate. These findings are in agreement with previous experimental observations and thus provide detailed atomistic insight into the poorly understood mechanism of the negative cooperativity in human CYP2E1.     

Absolute free energies of binding of peptide analogs to the HIV-1 protease from molecular dynamics simulations

The constants of binding of five peptide analogs to the active site of the HIV-1 aspartic-protease are calculated based on a novel sampling scheme that is efficient and does not introduce any approximations in addition to the energy function used to describe the system. The results agree with experiments. The squared correlation coefficient of the calculated vs. the measured values is 0.79. The sampling scheme consists of a series of molecular dynamics integrations with biases. The biases are selected based on an estimate of the probability density function of the system in a way to explore the conformational space and to reduce the statistical error in the calculated binding constants. The molecular dynamics integrations are done with a vacuum potential using a short cutoff scheme. To estimate the probability density of the simulated system, the results of the molecular dynamics integrations are combined using an extension of the weighted histogram analysis method (C. Bartels, Chem. Phys. Letters 331 (2000) 446-454). The probability density of the solvated ligand-protein system is obtained by applying a correction for the use of the short cutoffs in the simulations and by taking into account solvation with an electrostatic term and a hydrophobic term. The electrostatic part of the solvation is determined by finite difference Poisson-Boltzmann calculations; the hydrophobic part of the solvation is set proportional to the solvent accessible surface area. Setting the hydrophobic surface tension parameter equal to 8 mol(-1) K(-1) A(-2), absolute binding constants are in the muM to nM range. This is in agreement with experiments. The standard errors determined from eight repeated binding constant determinations are a factor of 14 to 411. A single determination of a binding constant is done with 499700 steps of molecular dynamics integration and 4500 finite difference Poisson-Boltzmann calculations. The simulations can be analyzed with respect to conformational changes of the active site of the HIV-1 protease or the ligands upon binding and provide information that complements experiments and can be used in the drug development process.