Interaction between bilirubin and sodium deoxycholate and their adsorption from mixed solutions on the surface of silica sorbents

The interaction between the bile pigment bilirubin and sodium deoxycholate is studied in aqueous buffer solutions at pH 7.4. It is established that bilirubin forms strong complexes with deoxycholate trimers. The complexation constant is determined by spectrophotometry. The adsorption of bilirubin and sodium deoxycholate from their mixed solutions on the surface of a hydrophilic and two hydrophobic silica sorbents is investigated. It is shown that bilirubin is adsorbed on the surface of all these sorbents only in the free state. Sodium deoxycholate is adsorbed in the forms of monomers and trimers. The affinity of all adsorbed particles is higher for hydrophobic silica sorbents. The binding constants of bilirubin, as well as monomers and trimers of deoxycholate, with the surfaces of all examined sorbents are determined.     

Formation of a supramolecular gel between alpha-cyclodextrin and free and adsorbed PEO on the surface of colloidal silica: effect of temperature, solvent, and particle size

Aqueous solutions of alpha-cyclodextrin (alpha-CD) complex spontaneously with poly(ethylene oxide) (PEO), forming a supramolecular structure known as pseudopolyrotaxane. We have studied the formation of the complex obtained from the threading of alpha-CD onto PEO, both free in solution and adsorbed on colloidal silica. The kinetics of the reaction were studied by gravimetric methods and determined as a function of temperature and solvent composition for the PEO free in solution. PEO was then adsorbed on the surface of colloidal silica particles, and the monomers were displaced by systematically varying the degree of complexation, the concentration of particles, and the molecular weight of the polymer. The effect of the size of the silica particles on the yield of the reaction was also studied. With the adsorbed PEO, the complexation was found to be partial and to take place from the tails of the polymer. The formation of a gel network containing silica at high degrees of complexation was observed. Small-angle X-ray and neutron scattering experiments were performed to study the configuration of the polymeric chains and confirmed the partial desorption of the polymer from the surface of the silica upon complexation.     

Are the reduction and oxidation properties of nitrocompounds dissolved in water different from those produced when adsorbed on a silica surface? A DFT M05‐2X computational study

The reduction and oxidation properties of four nitrocompounds (trinitrotoluene [TNT], 2,4‐dinitrotoluene, 2,4‐dinitroanisole, and 5‐nitro‐2,4‐dihydro‐3H‐1,2,4‐triazol‐3‐one [NTO]) dissolved in water as compared with the same properties for compounds adsorbed on a silica surface were studied. To consider the influence of adsorption, cluster models were developed at the M05/tzvp level. A hydroxylated silica (001) surface was chosen to represent a key component of soil. The PCM(Pauling) and SMD solvation models were used to model water bulk influence. The following properties were analyzed: electron affinity, ionization potential, reduction Gibbs free energy, oxidation Gibbs free energy, and reduction and oxidation potentials. It was found that adsorption and solvation decrease gas phase electron affinity, ionization potential, and Gibbs free energy of reduction and oxidation, and thus, promote redox transformation of nitrocompounds. However, in case of solvation, the changes are more significant than for adsorption. This means that nitrocompounds dissolved in water are easier to transform by reduction or oxidation than adsorbed ones. Among the considered compounds, TNT was found to be the most reactive in an electron attachment process and the least reactive for an electron detachment transformation. During ionization, a deprotonation of adsorbed NTO was found to occur. © 2015 Wiley Periodicals, Inc.     

Adsorption of Bilirubin-Albumin Complex on the Surface of Highly Dispersed Silica

The interaction of bilirubin with albumin in aqueous buffer solutions is studied and the stability constants of the formed complex are determined. The adsorption of bilirubin and albumin from their individual and mixed solutions on the surface of highly dispersed silica is studied as a function of pH and albumin concentration. It is shown that the character of the adsorption of bilirubin from solutions containing albumin changes significantly compared to the adsorption from an individual solution.     

Adsorption of trypsin on hydrophilic and hydrophobic surfaces

The adsorption of trypsin onto polystyrene and silica surfaces was investigated by reflectometry, spectroscopic methods, and atomic force microscopy (AFM). The affinity of trypsin for the hydrophobic polystyrene surface was higher than that for the hydrophilic silica surface, but steady-state adsorbed amounts were about the same at both surfaces. The conformational characteristics of trypsin immobilized on silica and polystyrene nanospheres were analyzed in situ by circular dichroism and fluorescence spectroscopy. Upon adsorption the trypsin molecules underwent structural changes at the secondary and tertiary level, although the nature of the structural alterations was different for silica and polystyrene surfaces. AFM imaging of trypsin adsorbed on silica showed clustering of enzyme molecules. Rinsing the silica surface resulted in 20% desorption of the originally adsorbed enzyme molecules. Adsorption of trypsin on the surface of polystyrene was almost irreversible with respect to dilution. After adsorption on silica the enzymatic activity of trypsin was 10 times lower, and adsorbed on polystyrene the activity was completely suppressed. The trypsin molecules that were desorbed from the sorbent surfaces by dilution with buffer regained full enzymatic activity.     

Electron spin resonance studies of spin-labelled polymers—18: Adsorption of spin-labelled poly(vinyl acetate) on silica surfaces

The adsorption of spin-labelled poly(vinyl acetate) from dilute solutions in ethyl acetate, chloroform and toluene onto three silica adsorbents of different surface silanol contents was studied. The adsorption capacities of the three silica samples, which decreased with decreasing surface silanol content, were dependent on the nature of the solvent, being greatest in the poor solvent toluene and least in the good solvent ethyl acetate. The ESR spectra of the polymer adsorbed on the silica of highest silanol content suggested that the polymer had a relatively flat conformation when toluene or chloroform was solvent and a more looped conformation when ethyl acetate was solvent. With the silica of intermediate silanol content, the polymer adsorbed from chloroform solution also had a loopy conformation. The silica of lowest silanol content was prepared by treating the first silica absorbent with trimethylchlorosilane. The line-shapes in the ESR spectrum of the labelled polymer adsorbed on this modified silica indicated a change in mode of adsorption.     

Study of adsorption behavior of bilirubin on human-albumin monolayer using a quartz crystal microbalance

The quartz crystal microbalance was employed to study the adsorption behavior of bilirubin on human-albumin layer, which was chemically bound to the self-assembled monolayer of 4-aminothiophenol on the surface of a gold electrode of the crystal via glutaraldehyde. A long-time adsorption process of bilirubin that took place on a human-albumin-modified surface was observed, and the adsorption kinetic parameters were estimated from the in situ frequency measurements. The amount of adsorbed bilirubin increased with increasing of both hydrogen ions and bilirubin concentration and was larger than that estimated based on the conclusion that there are two affinity sites for bilirubin per albumin molecule. With the present method, the displacement of bilirubin from an albumin layer caused by aspirin was also examined. QCM measurement provides a facile method for in situ monitoring of the adsorption/desorption of bilirubin on proteins layers.     

Adsorption of polymeric additives and their effect on the deposition of wood materials in paper production

The objective of this study is to understand how adsorbed synthetic polymers affect deposition kinetics of dissolved and colloidal wood materials. The synthetic polymers were characterised by means of static and dynamic light scattering, and their adsorption on silica was studied by means of optical reflectometry. Deposition kinetics of colloidal wood resin, compounds in model process water, as well as adsorption of anionic carbohydrates was then studied on the surface layers formed by synthetic polymers. It was found that neither wood resin nor anionic carbohydrates have affinity for adsorbed polyethylene oxide. However, wood resin deposited readily on adsorbed cationic polyacryl amides. Both polyethylene oxide and cationic polyacryl amides formed multilayers with compounds in the model process water.     

A physico-chemical investigation of poly(ethylene oxide)-block-poly(L-lysine) copolymer adsorption onto silica nanoparticles

The adsorption behavior of poly(ethylene oxide)-b-poly(L-lysine) (PEO(113)-b-PLL(10)) copolymer onto silica nanoparticles was investigated in phosphate buffer at pH 7.4 by means of dynamic light scattering, zeta potential, adsorption isotherms and microcalorimetry measurements. Both blocks have an affinity for the silica surface through hydrogen bonding (PEO and PLL) or electrostatic interactions (PLL). Competitive adsorption experiments from a mixture of PEO and PLL homopolymers evidenced greater interactions of PLL with silica while displacement experiments even revealed that free PLL chains could desorb PEO chains from the particle surface. This allowed us to better understand the adsorption mechanism of PEO-b-PLL copolymer at the silica surface. At low surface coverage, both blocks adsorbed in flat conformation leading to the flocculation of the particles as neither steric nor electrostatic forces could take place at the silica surface. The addition of a large excess of copolymer favoured the dispersion of flocs according to a presumed mechanism where PLL blocks of incoming copolymer chains preferentially adsorbed to the surface by displacing already adsorbed PEO blocks. The gradual addition of silica particles to an excess of PEO-b-PLL copolymer solution was the preferred method for particle coating as it favoured equilibrium conditions where the copolymer formed an anchor-buoy (PLL-PEO) structure with stabilizing properties at the silica-water interface.     

Adsorption of plasmid DNA to a natural organic matter-coated silica surface: kinetics, conformation, and reversibility

A quartz crystal microbalance with dissipation (QCM-D) has been used to determine the adsorption rate of ampicillin-resistant linear and supercoiled plasmid DNA onto a silica surface coated with natural organic matter (NOM). The structure of the resulting adsorbed DNA layer was determined by analyzing the viscoelastic properties of the adsorbed DNA layers as they formed and were then exposed to solutions of different ionic composition. The QCM-D data were complemented by dynamic light scattering measurements of diffusion coefficients of the DNA molecules as a function of solution ionic composition. The obtained results suggest that electrostatic interactions control the adsorption and structural changes of the adsorbed plasmid DNA on the NOM-coated silica surface. The adsorption of DNA molecules to the NOM layer took place at moderately high monovalent (sodium) electrolyte concentrations. A sharp decrease in solution ionic strength did not result in the release of the adsorbed DNA, indicating that DNA adsorption on the NOM-coated silica surface is irreversible under the studied solution conditions. However, the decrease in electrolyte concentration influenced the structure of the adsorbed layer, causing the adsorbed DNA to adopt a less compact conformation. The linear and supercoiled DNA had similar adsorption rates, but the linear DNA formed a thicker and less compact adsorbed layer than the supercoiled DNA.     

Adsorption of Gossypol from Cottonseed Oil on Oxides

The adsorption of gossypol, a toxic pigment and the major colorant in cottonseed oil, has been studied, using silicas and aluminas of different surface areas and pore size distributions. Gossypol has a high affinity for alumina surface, the adsorption isotherm follows the Langmuir equation, and the maximum amount adsorbed is compatible with a monolayer of molecules on the surface; this is indicative of chemisorption. The affinity for a silica surface is much lower and the adsorption isotherm follows the Freundlich equation. The amount adsorbed is also influenced by the pore size distribution, the useful surface area being that developed by pores larger than 3 nm, i.e., 2 to 3 times the size of the adsorbate. Copyright 2000 Academic Press.     

The adsorption of mercury(II) on the surface of silica modified with β-cyclodextrin

Multistage chemical modification of the surface of silica with β-cyclodextrin was performed. IR spectroscopy and quantitative analysis of surface compounds were used to prove the structure of modified silica. The adsorption of Hg(II) from dilute solutions was studied. The adsorption affinity of silica for mercury ions increased because of the formation of supramolecular structures with chemically immobilized β-cyclodextrin.     

Structure, stability, and orientation of BSA adsorbed to silica

In this investigation, the structure, stability, and orientation of bovine serum albumin (BSA) adsorbed onto silica particles were studied using differential scanning calorimetry (DSC) and limited proteolysis in combination with mass spectrometry (MS). DSC gave information on the overall structural stability of BSA while limited proteolysis was used to probe the accessibility of enzymatic cleavage sites, thereby yielding information on the orientation and structure of BSA adsorbed to silica surfaces. Thermal investigation of BSA in various buffers, both free in solution and in the adsorbed state, showed that solutes that surround the protein played an important role with respect to the overall structural stability and the structural heterogeneity of BSA. Limited proteolysis with trypsin and chymotrypsin indicated that BSA in the adsorbed state is oriented with domain 2 facing the silica surface. Also, upon adsorption, no additional cleavage sites were exposed. The combination of the results presented in this study implied that BSA molecules adsorbed onto silica particles were significantly reduced in their structural stability, but not to an extent that internal residues within the native structure became fully exposed to the solution.     

Adsorption Isotherms of Cetylpyridinium Chloride with Iron III Salts at Air/Water and Silica/Water Interfaces

The interaction of iron III salts and cetylpyridinium chloride (CPC) has been studied at the air/water and silica/water interfaces. The surface tension of cetylpyridinium chloride has been determined in aqueous solutions in the presence of iron III chloride and iron III nitrate at two constant pH values, namely, 3.5 and 1.2. It is shown that the surface tension of the cationic surfactant depends upon the ionic strength of the solution through the pH adjustment in the presence of the former salt but not in the presence of the latter. The effect of iron III nitrate on the surface tension of CPC is similar to that of potassium nitrate, indicating that the iron III various-hydrolyzed species do not interfere with the composition of the air/water interface. The competitive adsorption of iron III nitrate salt and the cationic surfactant at a silica/water interface was next investigated. The adsorption isotherms were determined at pH 3.5. It is shown that although the iron III ions, which were added to the silica dispersion in the presence of the cetylpyridinium ions, were strongly bound to the anionic surface sites, the surfactant ions are not salted out in the solution but remain in close vicinity of the silica surface. Conversely as the cationic surfactant is added first to the silica dispersion in the presence of the adsorbed iron III ions, the metal ions and the surfactant ions are both coadsorbed onto the silica surface. It is suggested that iron III hydrolyzed or free cations and the cationic surfactant molecules may not compete for the same adsorption sites onto the silica surface.     

Adsorption of cationic cellulose derivative/anionic surfactant complexes onto solid surfaces. II. Hydrophobized silica surfaces

The effect of the anionic surfactant SDS (sodium dodecyl sulfate) on the adsorption behavior of cationic hydroxyethyl cellulose (Polymer JR-400) and hydrophobically modified cationic cellulose (Quatrisoft LM-200) at hydrophobized silica has been investigated by null ellipsometry and compared with the previous data for adsorption onto hydrophilic silica surfaces. The adsorbed amount of LM-200 is found to be considerably larger than the adsorbed amount of JR-400 at both surfaces. Both polymers had higher affinity toward hydrophobized silica than to silica. The effect of SDS on polymer adsorption was studied under two different conditions: adsorption of polymer/SDS complexes from premixed solutions and addition of SDS to preadsorbed polymer layers. Association of the surfactant to the polymer seems to control the interfacial behavior, which depends on the surfactant concentration. For the JR-400/SDS complex, the adsorbed amount on hydrophobized silica started to increase progressively from much lower SDS concentrations, while the adsorbed amount on silica increased sharply only slightly below the phase separation region. For the LM-200/SDS complex, the adsorbed amounts increased progressively from very low SDS concentrations at both surfaces, and no large difference in the adsorption behavior was observed between two surfaces below the phase separation region. The complex desorbed from the surface at high SDS concentrations above the critical micelle concentration. The reversibility of the adsorption of polymer/SDS complexes upon rinsing was also investigated. When the premixed polymer/SDS solutions at high SDS concentrations (>5 mM) were diluted by adding water, the adsorbed amount increased due to the precipitation of the complex. The effect of the rinsing process on the adsorbed layer was determined by the hydrophobicity of the polymer and the surface.     

硅胶自环己烷溶液中吸附苯甲酸和苯的计量置换吸附模型

在293~313 K温度范围, 研究了硅胶在环己烷溶液中对苯甲酸和苯的吸附. 发现苯甲酸能非常好地服从计量置换吸附模型(SDM-A). 在用SDM-A处理苯的吸附时, 出现折线形的吸附等温线, 折线的转折点正好是单分子层吸附与多分子层吸附的分界点. 基于SDM-A, 研究了吸附热力学, 建立了吸附热力学的计算公式. 发现在环己烷溶液中苯甲酸被硅胶吸附是自发的、放热的熵增大过程, 而苯被吸附是自发的放热的熵减少过程, 苯甲酸的吸附自由能大于苯, 而吸附焓小于苯, 这是因为苯甲酸有更大的亲吸附剂作用和疏溶剂作用的结果.     

Surface free energies of silica fillers and their relation to the adsorption of poly(ethylene terephthalate)

The surface free energy of modified silica as well as of PET oligomers was evaluated through measurements of specific retention volumes of several probe molecules by use of the adsorption and adhesion principles in inverse gas chromatography. The nondispersive component of surface free energy of most silica fillers was larger than the dispersive component and the acidic component was much larger than the basic one, which indicated that the surfaces of most silica fillers were rather acidic. These methods were also applied to PET oligomer and it was found that the surface free energy of PET oligomer, regardless of preparation method, consisted of an almost dispersive component, suggesting that the surface of PET was neutral. The amount of PET oligomer adsorbed for the heat-treated silica fillers in acidic solvent increased linearly with increased acidic component of the surface free energy, which indicates that the acidic component of the surface free energy may be responsible for the adsorption. However, the adsorption amount on modified silica is much smaller than that for the heat-treated silica fillers because of steric hindrance caused by the attached organic chain, suggesting that the adsorption cannot be determined only by the surface free energy.     

Determination of Ag(I), Hg(II) and Pb(II) by using silica gel loaded with dithizone and zinc dithizonate

The modified sorbents with dithizone and zinc dithizonate adsorbed on the silica surface were obtained. The adsorption of heavy metal ions from aqueous solutions onto loaded silicas was studied. Color scales for Ag(I), Hg(II) and Pb(II) visual test detection were worked out. The modified silica gels were established to be applicable to semi-quantitative determination of these metal ions in buttermilk, natural, mineral and waste water.     

Fraction of H-bonded segments of N-ethylpyrrolidone,oligomeric and polymeric vinylpyrrolidone adsorbed from CHCl3 on silica measured by IR spectrometry

The adsorption of N-ethylpyrrolidone (NEP), oligomeric and polymeric vinylpyrrolidone (OVP, PVP) on silica (Aerosil 200) from CHCl₃ solution is investigated by IR spectrometry. The influence of the annealing temperature of the silica on the adsorbed amount and on the fraction of adhered segments was studied. The dependences of the amount adsorbed on solution concentration result for NEP in a Langmuir isotherm for OVP and PVP in high affinity isotherms. The fraction of adhered H-bridged carbonyl groups determined by compensation procedures, the fraction of surface SiOH groups occupied and the multiple interaction quotientQ show different dependences on the amount adsorbed for the measured adsorptives, indicating different interactions of the monomeric segments with the surface groups. This behaviour is explained by comparing the amount adsorbed in saturation with monolayer capacities, surface concentration of SiOH groups and frequency shifts. A splitting of the band of the bound carbonyl groups in a double peak was observed with OVP and PVP, referring to an additional interaction of polymer segments neighboured to specifically bound segments.Herrn Professor Dr. Robert Kerber zum 60. Geburtstag gewidmet.     

Iron adsorption on SiO2/Si(111)

The adsorption of ferric and ferrous iron onto the native oxide of the SiO₂/Si(111) surface has been evaluated using X‐ray photoelectron spectroscopy (XPS). Through a series of immersion experiments, performed at room temperature and pH 1, it has been shown that the ferric species is strongly adsorbed onto the hydrophilic surface, while ferrous iron remains in solution. Dehydroxylation of the silica surface by etching with hydrofluoric acid reduces the concentration of receptive Si‐OH groups, thereby limiting iron adsorption. The experiments were reproduced in a combined ultrahigh vacuum‐electrochemical system (UHV‐EC), which allowed a carbon‐free surface to be prepared before contacting the iron solutions, and confirmed the strong affinity of ferric iron towards the SiO₂/Si(111) surface. Copyright © 2007 John Wiley & Sons, Ltd.