Determination of As,Cd, Hg,Cu and Zn in biological samples by radiochemical neutron activation analysis

In this work, a simple group separation scheme based on extraction for NAA determination of trace of As, Cd, Hg, Cu and Zn in biological materials is described. For this purpose, zinc-diethyldithiocarbamate, Zn(DDC)₂, and methyl isobutyl ketone-iodide have been chosen as reagents. The elements can be extracted successively and quantitatively from strong mineral acids without adjusting pH of the solution, and separated into two groups suitable for gamma-ray spectrometry. Samples of 100–200 mg dry weight were double-sealed into polyethylene bags and irradiated in a swimming pool reactor with a thermal neutron flux of 10¹³n·cm^–2·s^–1 for 44 hours. After a cooling period of 1–3 days, the samples were digested with microgram quantities of carrier in concentrated nitric acid and sulfuric acid at 150°C for 3.5 hours in a teflon bomb, then extracted as described above. The reliability of the analytical method was checked using reference materials Horse Kidney IAEA H-8, Human Hair NIES-5 and Tomato Leaves NBS-1573. Most of the results obtained for reference materials agreed with the certified values¹². Chinese autopsy samples of hair and liver were presented.     

Vibronic effects in elastic scattering of electrons

A method for obtaining general equations for the scattered intensities from vibronic systems is given. The approximate formulas obtained are used to calculate the effects on the electron diffraction pattern for molecules with doubly degenerate electronic E terms interacting with e-type vibrations (Ee-type of problem). The results of the approximate calculations are compared to more precise results, based on numerical solution of the vibronic problem.     

Simultaneous determination of chromium and silicon in steel by 14-mev neutron activation analysis

Chromium and silicon are determined simultaneously in steel by 14-MeV neutron activation analysis. The activities of ⁵²V(E_γ=1.43 MeV,T_{$\text{1}\text{2}$}=3.76 min) from ⁵²Cr(n,p)⁵²V and ²⁸Al (E_γ=1.78 MeV; T_{$\text{1}\text{2}$}=2.24 min) from ²⁸Si(n,p)²⁸Al are evaluated by mixed γ-ray spectrometry. The influence of manganese and phosphorus, the main interfering elements, is negligible for most stainless steels. The count rate should be limited, to avoid ⁵²V pulse pile-up effects interfering in the ²⁸Al energy region. Precisions in the 2-10% range are reached, depending on the concentrations, for a 10-min analysis time. Results for a series of steel samples are compared with industrial analyses.     

Vibrational spectra,normal coordinate analysis and mean amplitudes of methyl borate,B(OCH3)3

Infrared spectra for methyl borate, B(OCH₃)₃ were recorded in the gas phase and solutions. Raman spectra were recorded for the same compound in liquid and solid states. The data were interpreted on the basis of a C_3h molecular model. A normal coordinate analysis for the complete model is included. The developed force constants were used to calculate the mean amplitudes of vibration which were compared with recent results from electron diffraction.     

The conformation and vibrational spectra of trans-1,4-dihalocyclohexanes: Part II. trans-1,4-Chlorobromocyclohexane and trans-1,4-chloroiodocyclohexane

The IR spectra of trans-1,4-chlorobromo- and trans-1,4-chloroiodocyclohexane were recorded in the region 4000–30 cm^?1 as solutes in various solvents, as KI and polyethylene pellets and as solids under high pressure (1–50 kbar at ambient temperature). Additional spectra of the melts, amorphous and annealed crystalline solids at 90 K and dichroism of oriented polycrystalline films were obtained above 200 cm^?1. Raman spectra of the compounds were recorded in the amorphous and crystalline states at 90 K, and polarization measurements were made in CCl₄ CS₂ and C₆H₆ solution.The title compounds existed as an equilibrium mixture of ee and aa conformers in solution, in the melts and in the amorphous solids at 90 K. When heated to temperatures in the region 165–195 K the amorphous solids apparently crystallized into a metastable form containing the aa conformer, while above 200 K the solids were converted to a stable crystal containing the ee conformer. Under high pressure the concentration of the aa conformer increased and this form was almost exclusively present at ca. 50 kbar nominal pressure.The fundamental frequencies for both conformers were assigned in terms of C_smolecular symmetry. An extensive normal coordinate analysis on six trans-1,4-dihalocyclohexanes was carried out using the overlay technique.     

Determination of ten trace elements in meteorites and lunar materials by radiochemical neutron activation analysis

A procedure is reported for the determination of Ni, Ge, Ru, Au, Ir, Zn, Ga, Cd, In and U in meteorites and lunar materials. The precision in multiple determinations at the 95% confidence level is less than 10% except for gold (15%). Ruthenium and uranium are determined by counting ⁹⁷Ru and ¹⁰³Ru x-rays; the chemical yield is determined from ¹⁰⁶Ru added before sample dissolution. The activity of ^116mIn is determined with improved sensitivity from integral counts in the region 1.5–3.0 MeV on a NaI(TI) detector.     

The precise and accurate determination of silicon in rocks by 14-MeV neutron activation analysis

The errors associated with the measurement of silicon in silicate rocks by fast neutron activation analysis have been investigated. The accuracy has been determined by comparing the values obtained with the accepted values for 22 silicate rock standards. Precisions of 0.25 % and accuracies of about 0.45 % are possible.     

Determination of As,Cd, Cu,Hg, Mo,Sb, and Se in biological reference materials by radiochemical neutron activation analysis

The elements As, Cd, Cu, Hg, Mo, Sb, and Se were determined in the biological reference materials (RMs) Bowen's Kale, NIST SRM-1577 Bovine Liver, NIST SRM-1549 Milk Powder, and Versieck's 2nd Generation Biological RM Human Serum using two newly developed radiochemical neutron activation analysis (RNAA) procedures. The first is based on sample decomposition in a mixutre of H₂SO₄+HNO₃+H₂O₂ and simultaneous extraction of the elements As, Cd–In, Cu, Mo, and Sb by 0.025M Zn(DDC)₂ in chloroform from 2–4M H₂SO₄ in the presence of 0.01M KI. The second consists of sample decomposition in HNO₃ in teflon bombs heated at 150°C, Hg extraction by 0.01M Ni(DDC)₂ in chloroform from about 1M HNO₃, and Se precipitation by ascorbic acid from about 1M HClO₄. The RNAA procedures were also used for intercomparison analyses of A and P NIST Leaf Materials (NIST candidate SRM-1515 Apple Leaves and NIST SRM-1547 Peach Leaves, respectively), and CZIM Bovine Liver 12-02-01 RM. Very good agreement of results with certified and/or literature values proved the high accuracy of these determinations by the proposed RNAA procedures, even at the sub-ng/g levels.     

Studies on the interaction between Se,Te, Cd,As and Zn and the distribution of Fe,Co, Rb and Hg in mice by instrumental neutron activation analysis

The incorporation of Se and Te into liver, kidneys, heart, spleen, lung and small intestine after i.p. injections of Balby mice with seleno-cystine (CySe)₂ and Na₂TeO₃ in the presence of Cd (as CdCl₂), As (as As₂O₃) and Zn (as ZnSO₄) has been studied. The change of contents of Co, Fe, Rb and Hg were determined in all investigated organs after injections with the above compounds. Instrumental neutron activation analysis was applied as the analytical method. It was found that a competitive interaction occurs between As and Se or Te. Similarly, this interaction has been observed between Se and Cd. The data obtained suggest that Cd has a higher competitive ability to displace Te than Zn and Se. Injection with the above compounds affects the contents of Fe, Co, Rb and Hg in all mice organs.     

A sequential multielement separation scheme for determination of As,Mn, Mo,Cu and Zn in human milk by neutron activation analysis

A simple separation scheme for the analysis of As, Mn, Mo, Cu and Zn using neutron activation is described. It has been checked using three standard reference materials, A-11 milk powder (IAEA) and bovine liver and orchard leaves (USNBS) and found to give acceptable results. This scheme was applied for determination of these trace elements in mature human milk samples. The concentrations of As, Mn, Mo, Cu in samples obtained from two socio-economic groups—low and middle incomes—were not significantly different. However, Zn levels in samples obtained from the poor income group were significantly lower than in those obtained from the other group. Work carried out under Research Contract No. 2598/RB of International Atomic Energy, Vienna. Health Physics Division. Analytical Chemistry Division.     

Cation analysis by thin-layer chromatography and reflectance spectroscopy : Part II. The determination of copper,nickel and zinc

A method has been developed whereby micro quantities of copper, nickel and zinc resolved on cellulose chromatoplates can be analyzed in situ by means of reflectance spectroscopy. Copper and nickel were determined in the presence of 11 other cations without any interference by employing neocuproine and dimethylglyoxime, respectively, as chromogenic reagents. In the case of zinc, the use of 3,3'-dimethyl-naphthidine was equally successful except in the presence of tin, cadmium and iron. Deviations to be expected when the procedure is employed routinely to determine nickel, copper and zinc, were estimated to be 2.1, 2.8 and 5.6%, respectively.     

Trace element determinations in shale oil products by neutron activation

Neutron activation offers some important advantages for the determination of selected trace elements in shale oil products. This paper gives techniques and results of a study of crude shale oil and naphtha, heavy distillate, and wax products of shale oil. The elements determined were Al, As, Au, Br, Ce, Cl, Co, Cr, Fe, Hg, I, K, Mn. Mo, Na, S, Sb, Se, V, and Zn. Some elements (Mn, Na, As) tend to accumulate in heavier fractions, whereas chlorine and iodine are concentrated in the more volatile fractions. The volatility of sulphur compounds in the shale oil products appears to be essentially uniform, with some tendency toward accumulation in distillation residues. The tendency for the trace elements to accumulate in the waxes that precipitated from cooled heavy distillates was very low.     

Use of new composite materials for the determination of Cu, Cd, Mo, As, and Sb in biological samples by radiochemical neutron activation analysis

Summary  Vezetéknév     

Determination of trace elements Cd,Co, Mo,Se, Ti and V in natural waters by neutron activation analysis

The concentration of cadmium, cobalt, molybdenum, selenium, titanium and vanadium in natural water was determined by neutron activation analysis, using a prior preconcentration by a coprecipitation. The preconcentration of these trace elements was accomplished by converting the dissolved trace ions into the pyrrolidine dithiocarbonate (PDC) chelates, followed by coprecipitation on Bi as well as Pb-PDC chelates. This technique has been applied to the elements in natural waters: fresh water and sea waters (Mediterranian and Dead Sea).     

The simultaneous determination of rhenium and osmium in rocks by neutron activation analysis

A neutron activation method is described for the determination of rhenium and osmium in rocks. Radiochemical separations, by carrier techniques, are carried out using anion-exchange and solvent extraction procedures. The results obtained for two molybdenites and the standard rocks G-I and W-I are compared with other published values.     

The determination of iodide in sea water by neutron activation analysis

A simple and sensitive method for the determination of iodide in sea water by neutron activation analysis has been developed. Iodide is separated from most other anions by passing sea water through a strongly basic anion-exchange column, recovered by elution with 2 M sodium nitrate, and concentrated from the eluate by precipitation as palladium(II) iodide in the presence of excess of palladium(II) with elemental palladium as carrier; elemental palladium is generated by reduction of some of the palladium(II) with thiosulfate. The precipitate is separated from the supernatant liquid by filtration. Checks on the efficiency of separation by means of added ¹²⁵I showed recoveries of 100 ± 3 %. The filter paper containing the precipitate is pressed into a pellet for neutron activation analysis by irradiation for 5 min at a flux of 4 ·10¹² n cm^?2 s^?1 and counting the ¹²⁸I 442.7-keV photopeak.     

Very accurate,simultaneous determination of trace amounts of Co and Ni in biological materials by radiochemical neutron activation analysis

A very accurate and sensitive method for the simultaneous determination of trace amounts of Co and Ni in biological materials has been elaborated. The method is based on radiochemical neutron activation. Irradiation of samples in Cd-shielded channel of a nuclear reactor assures balanced activity ratio of⁵⁸Co and⁶⁰Co isotopes and favourable detection limits for both nickel and cobalt. Column chromatography (ion exchange and extraction) has been used for the quantitative and selective isolation of the determined radionuclides. High accuracy of the method has been demonstrated by the analysis of several certified reference materials.     

The simultaneous determination of osmium,ruthenium, iridium and gold in platinum by neutron activation analysis

Osmium, ruthenium, iridiuim and gold can be determined simultaneously in 100-mg platinum samples after irradiation for 11 days at a thermal neutron flux of 4'1011 n.cm^-2.sec^-1. An addition method of analysis is used; samples are dissolved in small sealed silica tubes before activation. After irradiation, Os and Ru are distilled from sulfuric acid-sodium bromate, Ru being determined by counting the 498-keV peak of ¹⁰³Ru; Os is determined after a second distillation. Gold is extracted with ethyl acetate from the residue of the first distillation; the ratio ¹⁹⁸Au/¹⁹⁹Au is a direct measure for the gold content, with appropriate correction for the second-order reaction ¹⁹⁶Pt(n,γ)¹⁹⁷Pt→¹⁹⁷Au(n,γ)¹⁹⁸Au. Ir is determined in the residual aqueous phase using the 317-keV peak of ¹⁹²Ir; a correction for the platinum activity (¹⁹¹Pt) is made. The lower limit of determination is ca. 0.5 p.p.m. for ruthenium, ca. 0.2 p.p.m. for osmium, ca. O.1 p.p.m. for gold and ca. O.1 p.p.m. for iridium. After a separation of Pt from Ir, the sensitivity for Ir can easily be improved to < 10 p.p.b.     

Determination of As,Cd, Cr,Cu, Hg,Sb and Se concentrations by radiochemical neutron activation analysis in different Brazilian regional diets

The present paper describes radiochemical separation procedures developed for the determination of seven elements: As, Cd, Cr, Cu, Hg, Sb and Se in different Brazilian regional diets. In the case of the elements As, Hg, Sb and Se, the procedure was based on retention in inorganic exchanger TDO (tin dioxide) and determination of Hg by extraction with Ni(DDC)₂. For determination of Cd, Cr, Cu and Se the procedure chosen was based on retention in inorganic exchanger HMD (hydrated managese dioxide) and extraction of Cu and Cd as diethyldithiocarbamate compounds. The accuracy and precision of the methods studied were tested by means of analyses of different reference materials. Due to the lack of data on trace element levels in Brazilian foodstuffs and diets, these methods were applied to determination of these elements in different Brazilian regional diets. These diets were supplied by the Food and Experimental Nutrition Department of the Faculty of Pharmaceutical Science, University of São Paulo. The daily dietary intake values for these diets are presented for As, Cd, Cr, Cu, Hg, Sb and Se.