Spectrophotometric Determination of Prochlorperazine Maleate in Pure and Pharmaceutical Preparations

 Prochlorperazine maleate reacts with 1-naphthylamine and sodium nitrite, after heating for 110 s at 80 °C to give an orange red colour having maximum absorbance at 460 nm. The reaction is selective for prochlorperazine maleate with 0.01 mg/mL as visual limit of quantitation and provides a basis for a new spectrophotometric determination. The colour reaction obeys Beer’s law from 0.01 mg/10 mL to 0.33 mg/10 mL of prochlorperazine maleate and the relative standard deviation is 0.68%. The quantitative assessment of tolerable amounts of other drugs is also studied. Received September 22, 2000. Revision June 19, 2001     

Spectrophotometric Quantitation of Fluoxetine Hydrochloride Using Benzoyl Peroxide and Potassium Iodide

 Fluoxetine hydrochloride reacts with benzoyl peroxide and potassium iodide, after heating for 1 min at 30 °C, to give a blue colour having maximum absorbance at 570 nm. The reaction is selective for fluoxetine with 0.01 mg/mL as visual limit of quantitation and provides a basis for a new spectrophotometric determination. The colour reaction obeys Beer’s law from 0.1 mg/10 mL to 2.0 mg/10 mL of fluoxetine and the relative standard deviation is 0.68%. The qualitative assessment of tolerable amounts of other drugs is also studied. Received September 21, 1998. Revision September 10, 1999.     

Determination of Zirconium (IV) and Aluminium (III) in Waste Water

 Zirconium (IV) was determined spectrophotometrically by reaction with quercetin as primary ligand and oxalate as secondary ligand. Polyvinylpyrrolidone (PVP) was used as protective colloid to solubilize the formed zirconium quercetin oxalate ternary complex. The molar absorptivity of the 1:3:1 (zirconium–quercetin–oxalate) complex is 7.31 × 10⁴ L·mol⁻¹ cm⁻¹ at 430 nm with a stability constant of 8.2 × 10²⁰ and its detection limit is 0.16 mg/L. Beer’s law is rectilinear up to 1.46 mg/L of zirconium (IV). The sensitivity index is 1.25 ng cm⁻². The reaction of aluminium (III) with quercetin in presence of PVP as a surfactant has been studied spectrophotometrically. The molar absorptivity of the 1:3 (aluminium–quercetin) complex is 8.09 × 10⁴ × L·mol⁻¹·cm⁻¹ at 433 nm, its stability constant is 2.6 × 10¹³ with sensitivity index of 0.33 ng·cm⁻² and its detection limit is 0.08 mg/L. The optimal conditions for the quantitative determination of zirconium and aluminium were studied. The proposed methods are examined by statistical analysis of the experimental data. The methods are free from interference of most cations and anions. The proposed methods have been used to determine zirconium and aluminium in industrial waste water. Received May 30, 2001; accepted November 2, 2001; published online July 15, 2002     

Elimination of sulfide interference by sodium hypochlorite solution in the cold vapor atomic absorption spectrometric determination of mercury using tin(II) reduction in alkaline medium

An addition of sodium hypochlorite solution effectively eliminated the interference by sulfide in the cold vapor atomic absorption spectrometric determination of mercury using tin(II) reduction in alkaline medium. Mercury ranging from 0.01 to 0.5 μg could be determined within ±10% error in 100 mL of sample solution containing 10 mg of sulfide by the addition of 1 mL of 10.4%(w/v) sodium hypochlorite solution. The proposed method is rapid (5 min per determination) and has good reproducibility (3.0%). Received: 20 May 1998 / Revised: 7 July 1998 / Accepted: 10 July 1998     

Studies on non-cyanide alkaline zinc electrolytes

An alkaline non-cyanide zinc plating solution consisting of 10 g/l zinc oxide, 90 g/l sodium hydroxide and 1.5 g/l gelatine was prepared . Using this solution, a smooth, uniform and fine-grained semi-bright deposit was obtained on mild steel sheets over a wide range of current density and pH at 303 K. The plating bath had about 63% current efficiency and 25% throwing power at 303 K and at pH 10. Caffeine and vanillin additions to this bath gave bright zinc deposits. Received: 30 January 1998 / Accepted: 15 May 1998     

Angiotensin I-Converting Enzyme Inhibitory Proteins and Peptides from the Rhizomes of Zingiberaceae Plants

Ammonium sulphate cut protein extracts, and their pepsin hydrolysates, from the rhizomes of 15 plants in the Zingiberaceae family were screened for their in vitro angiotensin I-converting enzyme inhibitory (ACEI) activity. The protein extract from Zingiber ottensii had the highest ACEI activity (IC₅₀ of 7.30 × 10⁻⁷ mg protein/mL) and was enriched for by SP Sepharose chromatography with five NaCl step gradients 0, 0.25, 0.50, 0.75 and 1 M NaCl collecting the corresponding five fractions. The highest ACEI activity was found in the F75 fraction, which appeared to contain a single 20.7-kDa protein, suggesting enrichment to or near to homogeneity. The ACEI activity of the F75 fraction was moderately thermostable (−20–60 °C), showed >80% activity across a broad pH range of 4–12 (optimal at pH 4–5) and appeared as a competitive inhibitor of ACE (K _i of 9.1 × 10⁻⁵ mg protein/mL). For the pepsin hydrolysates, that from Zingiber cassumunar revealed the highest ACEI activity (IC₅₀ of 0.38 ± 0.012 mg/mL), was enriched to a single active hexapeptide by RP-HPLC with a strong ACEI activity (IC₅₀ of 0.011 ± 0.012 mg/mL) and acted as a competitive inhibitor of ACE (K _i of 1.25 × 10⁻⁶ mg protein/mL).     

Sensitive Determination of Adrenaline by Means of a Flow-Through Solid Phase UV Spectrophotometric Sensing Device

 A very sensitive flow-through optosensor with solid phase UV spectroscopic detection is proposed for the direct determination of adrenaline without prior derivatization. Sample is transported by the carrier stream (0.05 M NaCl/0.01 M NaOH) to the sensing microzone composed of Sephadex QAE A-25 resin placed in a flow-through cell, and its intrinsic absorbance is monitored at 287 nm. After development of the analytical signal adrenaline is easily and quickly desorbed from the solid support by a 0.7 M NaCl/0.01 M NaOH eluting solution stream. Adrenaline can be determined in the range 1–12 μg/ml, the detection limit being 0.17 μg/ml. The RSD (10 replicates) and sample throughput are 1.4% and 12 per hour, respectively. The procedure has been successfully applied to the determination of adrenaline in different medical formulations. Received May 26, 1999. Revision February 3, 2000     

Purification and Characterization of a Novel Collagenase from <Emphasis Type="Italic">Bacillus pumilus</Emphasis> Col-J

The collagenase, produced extracellular by Bacillus pumilus Col-J, was purified by ammonium sulfate precipitation followed by two gel filtrations, involving Sephadex G-100 column and Sepharose Fast Flow column. Purified collagenase has a 31.53-fold increase in specific activity of 87.33 U/mg and 7.00% recovery. The collagenase has a relative molecular weight of 58.64 kDa by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. The optimal temperature for the enzyme reaction was 45 °C. More than 50% of the original activity still remained after 5 min of incubation at 70 °C or 10 min at 60 °C. The maximal enzyme activity of collagenase was obtained at pH 7.5, and it was stable over a pH range of 6.5–8.0. The collagenase activity was strongly inhibited by Mn²⁺, Pb²⁺, ethylenediamine tetraacetic acid, ethylene glycol tetraacetic acid, and β-mercaptoethanol. However, Ca²⁺ and Mg²⁺ greatly increased its activity. The collagenase from B. pumilus Col-J showed highly specific activity towards the native collagen from calf skin. The K _m and V _max of the enzyme for collagen were 0.79 mg/mL and 129.5 U, respectively.     

Flow Injection Chemiluminescence Determination of Pipemidic Acid Using On-Line Electrogenerated Cobalt(III) as Oxidant

 A novel flow injection chemiluminescence (CL) system for the determinati on of pipemidic acid is described. It is based on the direct CL reaction of pipemidic acid and Co(III) in acid medium. The unstable Co(III) was on-line electrogenerated by constant current electrolysis. The CL intensity was linear with pipemidic acid concentration in the range of 0.01∼100 μg/ml, the determination limit was 3.3×10⁻⁹ g/mL. The whole process could be complete d in 1 min with a relative standard deviation of 3.2%. The proposed method is suitable for automatic and continuous analysis and has been applied successfully to the analysis of pipemidic acid in a pharmaceutical preparation. Received November 22, 1999. Revision March 24, 2000.     

Flow-injection analysis for the determination of total inorganic carbon and total organic carbon in water using the H2O2–luminol–uranine chemiluminescent reaction

In the presence of carbonate and uranine, the chemiluminescent intensity from the reaction of luminol with hydrogen peroxide was dramatically enhanced in a basic medium. Based on this fact and coupled with the technique of flow-injection analysis, a highly sensitive method was developed for the determination of carbonate with a wide linear range. The method provided the determination of carbonate with a wide linear range of 1.0 × 10⁻¹⁰–5.0 × 10⁻⁶ mol L⁻¹ and a low detection limit (S/N = 3) of carbonate of 1.2 × 10⁻¹¹ mol L⁻¹. The average relative standard deviation for 1.0 × 10⁻⁹–9.0 × 10⁻⁷ mol L⁻¹ of carbonate was 3.7% (n = 11). Combined with the wet oxidation of potassium persulfate, the method was applied to the simultaneous determination of total inorganic carbon (TIC) and total organic carbon (TOC) in water. The linear ranges for TIC and TOC were 1.2 × 10⁻⁶–6.0 × 10⁻² mg L⁻¹ and 0.08–30 mg L⁻¹ carbon, respectively. Recoveries of 97.4–106.4% for TIC and 96.0–98.5% for TOC were obtained by adding 5 or 50 mg L⁻¹ of carbon to the water samples. The relative standard deviations (RSDs) were 2.6–4.8% for TIC and 4.6–6.6% for TOC (n = 5). The mechanism of the chemiluminescent reaction was also explored and a reasonable explanation about chemical energy transfer from luminol to uranine was proposed. Figure Chemiluminescence profiles in batch system. 1, Injection of 100 μL of K₂CO₃ into 1.0 mL luminol-1.0 mL H₂O₂ solution; 2-3 and 4-5, Injection in sequence of 100 μL of K₂CO₃ and 100 μL of uranine into 1.0 ml luminol-1.0 mL H₂O₂ solution; C_luminol = 1.0 × 10⁻⁷ mol/L, C_H2O2 = 1.0 × 10⁻⁵ mol/L, C_uranine = 1.0 × 10⁻⁵ mol/L, C_K2CO3 = 1.0 × 10⁻⁷ mol/L except for 4-5 where C_K2CO3 = 1.0 × 10⁻⁴ mol/L     

Sorption-Catalytic Determination of Imazapyr on a Copper-Containing Sorbent

 Sorption of copper on filter-paper with chemically attached hexamethylenediamino-groups (HMDA-filter) allows to obtain the sorbent (Cu/HMDA-filter) stable in respect to desorption of copper. A nitrogen-containing herbicide imazapyr (imaz) is retained on Cu/HMDA-filters at pH 5.5–7.0 forming a relatively stable complex. Imazapyr is determined directly on the sorbent by its activating effect in the oxidation of hydroquinone with H₂O₂ catalyzed by Cu(II) with the formation of a product absorbing at 490 nm. The copper ions serve both to preconcentrate imazapyr and to catalyze the indicator reaction. The use of 1-μL sample aliquots pipetted onto the Cu/HMDA-filters allows to determine 1 × 10⁻³–0.03 μmol of imazapyr, whereas preconcentration of the analyte by pumping of its solution through the same sorbent expands the linear range to 1 × 10⁻⁴–1 × 10⁻¹ μmol of imazapyr. When the indicator reaction is carried out in solution, the range of activating action of imazapyr is narrower (0.06–0.1 μmol a for a solution volume of 10 mL). The determination is selective: 5–100-fold amounts of amines, aminoacids, carboxylic acid derivatives and other model compounds do not interfere. Soil extracts and carrot juice samples spiked with imazapyr have been analyzed. Received January 10, 2000. Revision July 28, 2000.     

Two-Phase Aqueous Extraction of Chromium and its Application to Speciation Analysis of Chromium in Plasma

 This work proposes a new extraction method for chromium based on the two-phase aqueous system isopropyl alcohol-ammonium sulfate-ammonium thiocyanate (i-PrOH-(NH₄)₂SO₄-NH₄SCN), and the related experimental conditions are optimized. The results show that chromium (III) can be quantitatively extracted under the selected conditions: 4 mL of i-PrOH, 200 μL of 2 mol/L sulfuric acid, 1 mL of 4 mol/L NH₄SCN and 3 mL of saturated (NH₄)₂SO₄ solution (V_total=10 mL). Application of the proposed method to speciation analysis of plasma chromium was also investigated and satisfactory results were obtained. Received May 22, 1999. Revision November 8, 1999.     

Purification and Partial Characterization of an Exo-polygalacturonase from Paecilomyces variotii Liquid Cultures

An extracellular polygalacturonase (PG) produced from Paecilomyces variotii was purified to homogeneity through two chromatography steps using DEAE-Fractogel and Sephadex G-100. The molecular weight of P. variotii PG was 77,300 Da by gel filtration and SDS-PAGE. PG had isoelectric point of 4.37 and optimum pH 4.0. PG was very stable from pH 3.0 to 6.0. The extent of hydrolysis of different pectins by the purified enzyme was decreased with an increase in the degree of esterification. PG had no activity toward non-pectic polysaccharides. The apparent K _m and V _max values for hydrolyzing sodium polypectate were 1.84 mg/mL and 432 μmol/min/mg, respectively. PG was found to have temperature optimum at 65 °C and was totally stable at 45 °C for 90 min. Half-life at 55 °C was 50.6 min. Almost all the examined metal cations showed partial inhibitory effects under enzymatic activity, except for Na⁺¹, K⁺¹, and Co⁺² (1 mM) and Cu⁺² (1 and 10 mM).     

Selective Complexometric Determination of Titanium(IV) Using Sodium Potassium Tartrate or Ascorbic Acid as Masking Agent

 A simple, rapid and accurate complexometric method is proposed for the determination of titanium(IV) where sodium potassium tartrate or ascorbic acid were used as masking agents. In the presence of diverse metal ions, titanium is first complexed with excess of EDTA and surplus EDTA is then titrated at pH 5–6 with zinc sulfate, xylenol orange being used as indicator. An excess of 5% aqueous sodium potassium tartrate is then added to displace the complexed EDTA from the Ti-EDTA complex quantitatively, which is titrated with zinc sulfate. Also, ascorbic acid may be used as the releasing agent. The methods work well in the range 1–53 mg of Ti(IV) for sodium potassium tartrate with relative errors ± 0.28% and standard deviations ≤ 0.16 mg. For ascorbic acid the range is 1.00–30.00 mg of Ti(IV) with relative errors of ± 0.40% and standard deviations of ≤ 0.05 mg Received October 9, 2001; accepted August 2, 2002     

The electrochemical determination of ammonium based on the selective inhibition of the low-spin iron(II)/(III) system of Prussian blue

A new method is described for the determination of ammonium in aqueous solutions with electrodes modified by Prussian blue (PB). The specific voltammetric response of PB-modified electrodes to ammonium ions is used for their analytical determination. In the presence of ammonium ions, a concentration-dependent inhibition of the low-spin iron(II/III) system of PB occurs. Only thallium and rubidium ions cause similar inhibition. A useful electrochemical determination method is thus available for detecting ammonium ions in the presence of frequently interfering potassium and sodium ions. Paraffin-impregnated graphite electrodes modified with a mechanically transferred PB layer and bulk-modified PB-composite electrodes are studied. The method is applicable within a concentration range which extends from 4 × 10⁻⁵ mol/l to 10⁻² mol/l NH₄ ⁺. The composite electrode is used in an electrochemical flow-through system in conjunction with the Kjeldahl method. Received: 21 April 1997 / Accepted: 28 May 1997     

Micellar Enhanced Analytical Application of Bismuthiol-II for the Spectrophotometric Determination of Trace Copper in Nutritional Matrices

 A simple spectrophotometric method for the determination of copper is described herewith, based on the formation of colored species of Cu (II) with 5-mercapto-3-phenyl-1,3,4-thiadiazole-2-thione (Bismuthiol II) in the presence of a neutral surfactant, Triton X-114. The yellow colored complex of Cu (II)–Bismuthiol-II–Triton X-114 shows maximum absorbance at 395 nm in water. The detection limit of the method is 0.03 mg/l while the Beer’s law is obeyed up to 1.2 mg/l of the analyte in an aqueous medium. The validity of the method has been examined for the determination of copper in wines, food supplements and raisins. The results obtained were in good agreement with those obtained using flame atomic absorption spectrometry (FAAS). The method thus constitutes a handy alternative for the determination of copper (II) in nutritional samples. Received May 16, 2001; accepted December 10, 2001; published online June 24, 2002     

A Novel Enhancing Flow-Injection Chemiluminescence Method for the Determination of Glutathione Using the Reaction of Luminol with Hydrogen Peroxide

 A rapid flow-injection method with chemiluminescence (CL) detection is described for the determination of glutathione (GSH). The method is based on the CL reaction of luminol and hydrogen peroxide. GSH can greatly enhance the chemiluminescence intensity in 0.1 mol/L borax–sodium hydroxide buffer solution (pH = 9.7). The maximum CL intensity was directly proportional to the concentration of GSH in the range 3.0 × 10⁻⁷–2.0 × 10⁻⁵ mol/L, and the detection limit was 6.8 × 10⁻⁸ mol/L. The relative standard deviation was 3.4% for 5.0 × 10⁻⁶ mol/L of GSH (n = 11). Received October 23, 2001; accepted June 18, 2002     

The aggregation of sodium dehydrocholate in water

 We used a battery of different methods to study the association in aqueous sodium dehydrocholate (NaDHC) solutions. This salt associates by a stepwise mechanism. Below (9.6 ± 4.2) × 10⁻⁴ mol dm⁻³ there is a molecular solution with some strongly insoluble dehydrocholic acid produced by hydrolysis. Between (9.6 ± 4.2) × 10⁻⁴ and (5.2 ± 2.2) × 10⁻³ mol dm⁻³, an aggregate similar to acid soap (NaDHC.HDHC) appears and its amount and the aggregate's size increase with concentration. At =(2.20 ± 0.85) × 10⁻² mol dm⁻³ the aggregates formed have properties usually associated with true micelles, such as solubilisation of water-insoluble dyes. These aggregates increase in size with concentration and change their shape at 8 × 10⁻² mol dm⁻³, giving nonsymmetrical aggregates. The changes in the solution physicochemical properties at these concentrations may be misinterpreted and this explains the different values of the critical micelle concentration reported in the literature for substances with similar structure, such as bile salts. Received: 14 May 2001 Accepted: 10 August 2001     

Development of a HPLC Method for Analysis of Linear Alkylbenzene Sulphonates and Detection by UV and FTIR Spectroscopy Using Thermospray Interface

 A reversed-phase high performance liquid chromatography (RP-HPLC) method, with acetic acid and sodium perchlorate phase modifiers, was developed to separate a mixture of linear alkylbenzene sulphonates (LAS), containing 10 to 13 carbon atoms. The effects of methanol-water compositions and concentrations of used modifiers were investigated and compared. The separation achieved with 50 mg L⁻¹ acetic acid was found satisfactory whereas a concentration of 10 g L⁻¹ sodium perchlorate was preferred. Chromatograms obtained with UV and Fourier transform infrared (FTIR) detection showed almost similar features and HPLC-FTIR interface spectra of LAS components exhibited excellent agreement of absorption features to those of standard FTIR spectrum and no thermal degradation was found to occur. Received May 20, 1998 Revision March 25, 1999.     

Microgravity experiments on colloidal crystallization of silica spheres in the presence of sodium chloride

 Rate coefficients (k) in the colloidal crystallization of monodispersed silica spheres in the presence of sodium chloride are studied in microgravity achieved by parabolic flights of an aircraft. Time-resolved reflection spectroscopy is made with a continuous circulating-type stopped-flow cell system. The k values decrease as the salt concentration increases both at 0 and 1 G and those in microgravity are smaller than those in normal gravity by 16% (maximum), especially in water and in the presence of a small amount of the salt lower than 2 × 10⁻⁶ mol/l. The rates in flight at 1 G are larger by 15% (maximum) compared with those at 1 G on the ground. The k values obtained at 0 G, 1 G in flight and 1 G on the ground agree excellently with each other for the suspensions with 3 × 10⁻⁶ and 4 × 10⁻⁶ mol/l sodium chloride. Disappearance of the downward diffusion of spheres and no convection of the suspensions are important for retardation in microgravity. Received: 20 January 2000 Accepted: 9 March 2000