Superelectrophilic activation of N-aryl amides of 3-arylpropynoic acids: synthesis of quinolin-2(1H)-one derivatives

The superelectrophilic activation of N-aryl amides of 3-arylpropynoic acids by Bronsted superacids (CF₃SO₃H, HSO₃F) or strong Lewis acids AlX₃ (X=Cl, Br) results in the formation of 4-aryl quinolin-2(1H)-ones in quantitative yields. The vinyl triflates or vinyl chlorides may be formed as additional reaction products. The investigated amides in reactions with benzene give 4,4-diaryl 3,4-dihydroquinolin-2-(1H)-ones under the superelectrophilic activation. 4-Aryl quinolin-2(1H)-ones in POCl₃ are converted into 4-aryl 2-chloroquinolines. 4-Fluorophenyl-4-phenyl 3,4-dihydroquinolin-2-(1H)-one give N-formylation products in a yield of 79% under the Vilsmeier–Haack reaction conditions.     

Gallium(III) triflate-catalyzed one-pot selective synthesis of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones

A series of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones have been synthesized in good to excellent yields and high selectivity by one-pot reaction using isatoic anhydride, ammonium acetate (or amines), and aldehydes in ethanol or in DMSO under mild conditions, respectively. The reaction was efficiently promoted by 1 mol % Ga(OTf)₃ and the catalyst could be recovered easily after the reactions and reused without evident loss of reactivity.     

An efficient HCCP-mediated direct amination of quinazolin-4(3H)-ones

An efficient direct amination of quinazolin-4(3H)-ones has been developed. Treatment of quinazolin-4(3H)-ones with HCCP, DIPEA, and N-contained nucleophiles in acetonitrile could be able to form the corresponding 4-aminoquinazoline derivatives. Under the optimal reaction conditions, the amination products were achieved in good yields.     

Synthesis of new pyrazole-1,2,3-triazole dyads

An efficient two step synthetic methodology of new 5(4)-aryl-4(5)-[3(5)-(2-hydroxyphenyl)-1H-pyrazol-5(3)-yl]-1H-1,2,3-triazole dyads was established. The reaction of (E)-2-styryl-4H-chromen-4-ones, used as building blocks, with sodium azide, gave 4(5)-aryl-5(4)-(chromon-2-yl)-1H-1,2,3-triazoles bearing either electron-donating or electron-withdrawing substituents in their styryl moiety which upon reaction with hydrazine hydrate afforded the expected pyrazoles in moderate to very good yields.     

The reaction of 2-(1-hydropolyfluoro-1-alkenyl)-4H-3,1-benzoxin-4-ones with dinucleophilic reagents: a convenient route to fluoroalkylated nitrogen-containing tricyclic compounds

The reactions of 2-(1-hydropolyfluoro-1-alkenyl)-4H-3,1-benzoxin-4-ones (2) with hydrazine hydrate and phenyl hydrazine were investigated. The reaction of 2 with hydrazine hydrate in ethanol under reflux condition readily gave 2-fluoroalkyl-4H-pyrazolo[5,1-b]quinazolin-9-ones (3) in high yields. The reaction of 2 with phenyl hydrazine, however, resulted in the formation of 2-(2-phenyl-5-fluoroalkyl-2H-pyrazol-3-yl) benzoic acids (7). Further treatment of 7 with PPA gave 1-phenyl-4,9-dihydro-3-fluoroalkyl-1H-pyrozolo[3,4-b]quinolin-4-ones (4) in 65-80% overall yields.     

New synthetic methods for 2,3-diarylacridin-9(10H)-one and (E)-2-aryl-4-styrylfuro[3,2-c]quinoline derivatives

Two new synthetic methodologies for 2,3-diarylacridin-9(10H)-ones were developed. The first one involves the Heck reaction of (E)-3-iodo-2-styrylquinolin-4(1H)-ones with styrenes, leading to (E,E)-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize in two different ways. Electrocyclization and further in situ oxidation leads to 2,3-diarylacridin-9(10H)-ones, while tautomerization, cyclization by nucleophilic addition and further in situ oxidation produces (E)-2-aryl-4-styrylfuro[3,2-c]quinolines as the main compound. The second method gives only 2,3-diaryl-10-methylacridin-9(10H)-ones and involves the Heck reaction of (E)-3-iodo-1-methyl-2-styrylquinolin-4(1H)-ones and styrenes, leading to (E,E)-1-methyl-2,3-distyrylquinolin-4(1H)-ones, which when heated at high temperatures cyclize through electrocyclization and oxidation processes affording the expected compounds. The structures of all new compounds were established by extensive NMR studies.     

CuO nanoparticles catalyzed simple and efficient synthesis of 2,3-dihydroquinazolin-4(1H)-ones and quinazolin-4(3H)-ones under ultrasound irradiation in aqueous ethanol under ultrasound irradiation in aqueous ethanol

A CuO nanoparticle-catalyzed one-pot process has engineered for the preparation of diverse quinazolinones from the readily available isatoic anhydride, aldehydes and amine or ammonium. For amine substrates the reactions afford 2,3-dihydroquinazolin-4(1H)-ones in aqueous ethanol promoted by ultrasound irradiation. However, the ammonium substrates undergo intramolecular electron transfer and rearrangement yielding quinazolin-4(3H)-ones. The catalyst is recyclable four times without loss of substantial activity. Other remarkable features include the wide range of functional group tolerance (46 quinazolinones are synthesized and 9 of them are reported firstly), and providing moderate to excellent yield of the products under mild conditions.     

Efficient one-pot synthesis of 2,3-dihydroquinazolin-4(1H)-ones from aromatic aldehydes and their one-pot oxidation to quinazolin-4(3H)-ones catalyzed by Bi(NO3)3·5H2O: Investigating the role of the catalyst

An efficient and novel synthesis of 2,3-disubstituted 2,3-dihydroquinazolin-4(1H)-ones via one-pot, three-component reaction of isatoic anhydride, primary amines and aromatic aldehydes catalyzed by Bi(NO₃)₃·5H₂O under solvent-free conditions is described. Oxidation of these 2,3-dihydroquinazolin-4(1H)-ones to their quinazolin-4(3H)-ones was also successfully performed in the presence of Bi(NO₃)₃·5H₂O. This new method has the advantages of convenient manipulation, short reaction times, excellent yields, very easy work-up, and the use of commercially available, low cost and relatively non-toxic catalyst. The role of Bi(NO₃)₃·5H₂O was also investigated in these transformations.     

Biginelli reaction starting directly from alcohols

An efficient of one-pot oxidative access to 3,4-dihydropyrimidin-2-(1H)-ones directly from aromatic alcohols under mild conditions is reported. The protocol involves 1-methylimidazolium hydrogen sulphate [Hmim]HSO₄ catalyzed oxidation of aromatic alcohols to aromatic aldehydes with NaNO₃ followed by their cyclocondensation with 1,3-dicarbonyl compounds and urea in the same reaction vessel at 80 °C within 2-4 h to afford 3,4-dihydropyrimidin-2-(1H)-ones in 55-97% overall yields. Thus, the present work utilizing alcohols instead of aldehyde in Biginelli reaction is a valid and green alternative to the classical synthesis of 3,4-dihydropyrimidin-2-(1H)-ones.     

Antimony trichloride catalyzed three-component reaction of urea, aldehydes and cyclic enol ethers: a novel route to 4-arylhexahydrofuro[2,3-d]pyrimidin-2(3H)-ones

Antimony trichloride efficiently catalyses diastereoselective three-component reaction of urea, aromatic aldehydes and 2,3-dihydrofuran or 3,4-dihydro-2H-pyran leading to 4-arylhexahydrofuro[2,3-d]pyrimidin-2(3H)-ones and 4-arylhexahydro-1H-pyrano[2,3-d]pyrimidin-2(8aH)-ones, respectively in good yield.     

Efficient synthesis of mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones using KAl(SO4)2·12H2O as a reusable catalyst in water and ethanol

KAl(SO₄)₂·12H₂O was found to catalyze efficiently a one-pot three-component cyclocondensation of isatoic anhydride and primary amines or ammonia sources such as (NH₄)₂CO₃, NH₄OAc and NH₄Cl with aromatic aldehydes under mild conditions to afford the corresponding mono- and disubstituted 2,3-dihydroquinazolin-4(1H)-ones in good yields.     

2-Pivalamido-3H-pyrimidin-4-one derivatives: convenient pivalamide hydrolysis using Fe(NO3)3 in MeOH

A simple methodology for pivalamide (trimethylacetamide, pivaloylamino) hydrolysis has been discovered using Fe(NO₃)₃ in MeOH at room temperature. The pivalamido group of 2-pivalamido-3H-pyrimidin-4-ones or fused 2-pivalamido-3H-pyrimidin-4-ones such as 2-pivalamido-3H-quinazolin-4-ones and 2-pivalamido-3H-pteridines have been hydrolysed under these conditions to afford the corresponding amine.     

Isoquinolin-1(2H)-ones and 1,6-naphthyridin-5(6H)-ones by an N-acylation-SNAr sequence

A new synthesis of 2,3-dialkyl-4-carbomethoxyisoquinolin-1(2H)-ones and 6,7-dialkyl-8-carbomethoxy-1,6-naphthyridin-5(6H)-ones is reported. The process involves treatment of a β-enaminoester with 2-fluoro-5-nitrobenzoyl chloride, 2-fluorobenzoyl chloride or 2-chloronicotinoyl chloride followed by heating in the presence of base. The conversion, which proceeds by an N-acylation-S_NAr reaction sequence, affords 50–86% yields when R¹ is n-alkyl but ≤30% yields when R¹ is α-branched.     

Regioselective dehydrogenation of 3,4-dihydropyrimidin-2(1H)-ones mediated by ceric ammonium nitrate

Ceric ammonium nitrate (CAN) has been explored for the regioselective oxidation of 3,4-dihydropyrimidin-2(1H)-ones (DHPMs). Interestingly, we obtained ethyl 2,4-dioxo-6-phenyl-tetrahydropyrimidin-5-carboxylates as the major products during the oxidation of DHPMs by CAN/AcOH at 80 °C. The reaction afforded a mixture of products while employing CAN in organic solvents without additives. However, the regioselective dehydrogenated product, ethyl 6-methyl-4-aryl(alkyl)-pyrimidin-2(1H)-one-5-carboxylate was obtained by performing the reaction with NaHCO₃. The single crystal X-ray crystallography of ethyl 6-methyl-4-(2-phenyl)-pyrimidin-2(1H)-one-5-carboxylate revealed that the oxidized product existed in amidic form rather than aromatized enol form of pyrimidines. The efficiency of the present protocol enabled the synthesis of structurally diverse pyrimidines in moderate to good yields under milder reaction conditions.     

A new approach to the synthesis of 4-(N-aryl)carbamoylmethyl-4,5-dihydropyridazin-3(2H)-ones

Reaction of N-aryl substituted maleimides with aliphatic ketazines leads to the formation of 4,5-dihydropyridazin-3(2H)-ones in moderate yields. The reaction proceeds through 1,4-addition of an azine to the maleimide double bond, as confirmed by separation of the corresponding adducts in some cases, which are then converted into 4,5-dihydropyridazin-3(2H)-ones. In addition, the solid-state synthesis of 4,5-dihydropyridazin-3(2H)-ones is demonstrated for the first time.     

Synthesis of 3,4-dihydrobenzo[g]isoquinoline-1(2H)-ones and 3,4-dihydroisoquinoline-1(2H)-ones skeleton via intramolecular electrophilic cyclization

An original alternative approach to isoquinolines based on the installation of a benzene nucleus on a performed heterocyclic ring. Synthesis of 3,4-dihydrobenzo[g]isoquinoline-1(2H)-ones and 3,4-dihydroisoquinoline-1(2H)-ones via intramolecular electrophilic cyclization of 3,4-disubstituted lactams is reported.     

Electrogenerated N-heterocyclic carbenes: N-functionalization of benzoxazolones

A simple electrochemical procedure for the N-acylation and N-alkylation of benzoxazol-2(3H)-ones has been set up via electrolysis of an ionic liquid containing a benzoxazolone followed by addition of saturated or unsaturated anhydrides or alkyl halides. The electrochemically induced N-functionalization of benzoxazol-2(3H)-ones works very well in all tested ionic liquids, avoiding the use of volatile organic solvents. The N-acyl and N-alkyl derivatives of benzoxazol-2(3H)-ones were isolated in good to excellent yields; moreover, the ionic liquid has been reused fivefold maintaining the high yield of the products.     

Rapid access to 3-(N-substituted)-aminoquinolin-2(1H)-ones using palladium-catalyzed C-N bond coupling reaction

A series of 3-(N-substituted)-aminoquinolin-2(1H)-ones have been synthesized by the palladium-catalyzed C-N coupling reaction starting from 3-bromoquinolin-2-(1H)-ones. Various nucleophiles including amines, amides, sulfonamides, carbamates and ureas have been used successfully. In all the cases, the reactions take place rapidly in 1,4-dioxane and proceed in good to excellent yield using palladium acetate as a catalyst, Xantphos as a ligand and Cs₂CO₃ as a base.     

Access to 4-substituted 3,4-dihydroquinolin-2(1H)-ones by an unusual radical cyclisation of a secondary amide

A novel route to 3,4-dihydroquinolin-2(1H)-ones involving two radical addition steps is reported, starting from readily accessible xanthates and N-aryl-3-butenamides.     

A new approach to the facile synthesis of mono- and disubstituted quinazolin-4(3H)-ones under solvent-free conditions

Quinazolin-4(3H)-one derivatives were synthesized successfully via a one-pot, three component reaction of isatoic anhydride and an orthoester with ammonium acetate or a primary amine catalyzed by silica sulfuric acid under solvent-free conditions. This is the first report on the synthesis of 2-substituted quinazolin-4(3H)-ones by this procedure.