Tracer diffusion of Co2+ ions in agar gel containing multi-electrolyte systems

Tracer diffusion coefficients of cobalt ions have been measured in the supporting medium containing multi-electrolyte systems of alkali bromides. The electrolyte concentration was varied between 10^–6-0.1M at 25°C and the diffusion coefficients were determined by zone-diffusion technique using agar gel medium. The trend in the theoretical values of diffusion coefficients is accounted for by considering the relative contribution of mobility function, ionic strength as well as ion size parameter to the theoretical value in different systems. While the deviations between theoretical and experimental values of diffusion coefficients are explained on the basis of various co-occurring effects in ion-gel-water system.     

三元杂质砷锑钴对锌电沉积阴极过程的影响

采用电化学研究方法探讨了在锌电积过程中砷、锑、钴杂质对阴极极化过程的单一和共同影响,得出了单一杂质和三元杂质对锌电积过程影响的动力学方程及参数,并对其极化机理进行了研究.结果表明,含一元杂质的ZnSO4/H2SO4溶液的动力学参数与理论值基本一致,而含三元的ZnSO4/H2SO4溶液的传递系数α要比理论值小,说明杂质的存在及其含量的大小、品种的多少对锌电积影响程度不同.     

Rapid determination of globin chains in red blood cells by capillary electrophoresis using INSTCoated fused‐silica capillary

A laboratory‐made INSTCoated fused‐silica capillary has been newly used for CE separation of four mixtures of proteins in sodium phosphate BGEs at pH 3.0 and 2.5, respectively. The obtained separation efficiencies range from 145 000 theoretical plates per meter for myoglobin to 1 216 000 m^?1 for lysozyme. A total of 49–89% of the number of theoretical plates was obtained in a commercial polyvinyl alcohol coated capillary compared to the INSTCoated capillary under the same experimental conditions, 0–86% was obtained in a laboratory polyacrylamide‐coated capillary, and only 0–6% was obtained in an uncoated fused‐silica capillary. The RSD values for the intraday repeatability for an INSTCoated capillary were 0.1–1.0% (migration time) and 0.3–2.4% (peak area); RSD values for the interday repeatability in the same capillary are 0.6–1.4% (migration time) and 2.4–5.5% (peak area); RSD values for interday repeatability between different capillaries equaled 1.7–2.1% (migration time) and 2.8–10.9% (peak area). The INSTCoated capillary has been further used for rapid determination of globin chains isolated from red blood cells. A separation of α and β chains prepared from adult blood has been completed in 3 min with a peak resolution of 1.3, and the separation of α and ^Gγ chains prepared from newborn blood took 3 min with a peak resolution of 3.6.     

On the evaluation of the surface free energy of porous and powdered solids from imbibition experiments: equivalence between height-time and weight-time techniques

A study of the equivalence between the height-time and weight-time experimental techniques, based on the imbibition of liquids into porous or powdered solids, has been carried out, determining under what conditions the deductions about the surface free energy of these solids made from the analysis of the experimental results obtained as weight versus time are similar to those deduced from the analysis of height versus time. Concretely, we have proved that only if the particular values of the porosity of the solid determined from the proper technique of imbibition, named the effective porosity, are taken into account, the analysis of both type of experimental measurements leads to the same conclusions about the surface free energy of the porous and powdered solids. In order to exemplify this, capillary rise measurements have been carried out by means of these two techniques with different liquids on silica gel layers.     

Selection and Optimization of Dispersant in Ceramic Slurry Processing by Different Techniques: Comparison,Correlation, and Standardization

This article describes the selection and optimization of dispersant dosage in colloidal processing of ceramic slurry by techniques such as particle charge detector (PCD), capillary suction time (CST), rheological measurement, and wet point and flow point techniques. In general, experimental results are found to be in good agreement with each other with some degree of variation. PCD, CST, and rheological techniques are related by a simple linear function. The experimental and calculated values are well matching within an error limit of 10%. Attempt has been made to develop formula for correlating results of optimization from one technique to those obtained from another technique. The region where the suspension is well dispersed, CST is linearly correlated with PCD. The advantages and limitations of each technique have been described and discussed.     

The effect of interface deformation due to gravity on line tension measurement by the capillary rise in a conical tube

Much research has been done on line tension measurement and interpretation, and attempts have also been made to measure line tension with simple, cheap and reliable methods that do not require excessive sophistication. Of particular interest is the method of determining line tensions of solid–liquid–vapor systems from the capillary rise in a conical tube. This simple and relatively inexpensive method gives line tension values comparable to those reported in the literature obtained via highly sophisticated instruments or techniques such as the well known axisymmetric drop shape analysis technique. The absolute value of line tension obtained using the conical tube method and assuming a spherical liquid–vapor interface is larger but of the same order of magnitude (1 μJ m⁻¹) as that reported in the literature. A theoretical analysis presented herein shows that by including the deformation of the liquid–vapor interface due to gravity in the conical capillary analysis, the line tension value inferred from the experimental data is reduced by approximately 50% and compares better with values in the literature obtained using other sophisticated methods. Thus a relatively simple, cheap, accurate and reliable method of line tension measurement has been advanced.     

Influence of arsenic, antimony and cobalt impurities on the cathodic process in zinc electrowinning

By means of an electrochemical study, the influence of arsenic, antimony and cobalt on cathodic polarization in the zinc electrowinning process, the associated kinetic equations and parameters, and the polarization mechanism have been studied. The results show that the experimental values of the kinetic parameters are in accord with the theoretical values in the ZnSO₄/H₂SO₄ solution with a single impurity is added. In contrast, the charge transfer coefficient α is smaller than the theoretical value in the ZnSO₄/H₂SO₄ solution when the three impurities are added together.     

Organic solid-state reactions

The role of voids and cracks in solid-state reaction between 8-hydroxyquinoline and phthalic anhydride has been investigated. 8-hydroxyquinoline reacts with phthalic anhydride both in solution and in solid state, forming a 1:1 yellow-colored complex. X-ray diffraction studies prove that the complex obtained from the solid-state reaction is the same as that obtained from solution. Several techniques have been used to study the kinetics of the reaction in the solid state. Kinetic studies by capillary technique showed that surface migration is the mode of diffusion of reactant concerned. Dilatometric technique confirms the formation of cracks and voids in the systems and shows that the reaction is propagated through the channels.     

Electrolyte-diffusion of cobalt sulphate in agar gel medium at 25 °C

The diffusion of cobalt sulphate is studied in 1% agar gel over a concentration range of 10^–5 to 0.2M at 25 °C. The experimental values of the diffusion coefficient at various concentrations determined by the zone-diffusion technique are compared with the theoretical values of diffusion coefficinets computed on the basis of Onsager-Fuoss theory. The observed deviations are interpreted in terms of relative contributions of diffusion-enhancing and diffusion-retarding interactions occurring in the water-gel-electrolyte system.     

Electrodeposition of zinc + cobalt alloys.: Relation between the electrochemical response and the composition and morphology of the deposits

The electrodeposition of cobalt and zinc + cobalt alloy in aqueous chloride solution has been studied on vitreous carbon electrodes under different concentration conditions (total concentration of metallic ion 0.1 mol dm ⁻³, chloride ion 1 mol dm ⁻³, pH = 3), particularly during the initial stages of the deposition process. For the alloy a relation has been found between the shape of the current-time transients, the morphology of the deposits, the stripping analysis and the results of X-ray microanalysis. The different alloy phases present in the deposits were identified using X-ray microanalysis data, stripping voltammetry results and literature data.The results indicate that the electrocrystallization of cobalt is inhibited even at very low concentrations of zinc in solution: voltammetric and galvanostatic results indicate that the deposition potentials always correspond to more negative values than those for cobalt deposition. This inhibition depends strongly on both the metallic ion ratio in solution and the applied overpotential (or current density). For Zn(II)/Co(II) ratios greater than 1/9, low overpotentials (or low current densities) favoured homogeneous and compact deposits that were rich in zinc and were mainly composed of γ-phases of zinc + cobalt alloy. However, when high overpotentials or current densities were used and/or when the Zn(II)/Co(II) ratio was very low (< 1/9), dendritic and non-homogeneous cobalt-rich deposits were obtained.     

Effect of contact angle on capillary rise in annular meniscus

The shapes of axisymmetric annular menisci are calculated for a range of contact angles at the constraining cylindrical walls. From these shapes the capillary rise (or depression) Δh relative to an infinite external meniscus is obtained in terms of the radii of the inner and outer cylinders and physical properties of the liquids. This value of Δh may then be used to correct the measured rise in a concentric capillary tube relative to the annular meniscus. The capillary rise, Δh, has been experimentally measured for several liquids and their surface tensions directly calculated from these values. Excellent agreement with accepted values is obtained, even though the measured capillary rise is very small, thus confirming the accuracy of the theoretical calculations and experimental technique.     

Formulation of improved basis sets for the study of polymer dynamics through diffusion theory methods

In this work a new method is proposed for the choice of basis functions in diffusion theory (DT) calculations. This method, named hybrid basis approach (HBA), combines the two previously adopted long time sorting procedure (LTSP) and maximum correlation approximation (MCA) techniques; the first emphasizing contributions from the long time dynamics, the latter being based on the local correlations along the chain. In order to fulfill this task, the HBA procedure employs a first order basis set corresponding to a high order MCA one and generates upper order approximations according to LTSP. A test of the method is made first on a melt of cis-1,4-polyisoprene decamers where HBA and LTSP are compared in terms of efficiency. Both convergence properties and numerical stability are improved by the use of the HBA basis set whose performance is evaluated on local dynamics, by computing the correlation times of selected bond vectors along the chain, and on global ones, through the eigenvalues of the diffusion operator L. Further use of the DT with a HBA basis set has been made on a 71-mer of syndiotactic trans-1,2-polypentadiene in toluene solution, whose dynamical properties have been computed with a high order calculation and compared to the "numerical experiment" provided by the molecular dynamics (MD) simulation in explicit solvent. The necessary equilibrium averages have been obtained by a vacuum trajectory of the chain where solvent effects on conformational properties have been reproduced with a proper screening of the nonbonded interactions, corresponding to a definite value of the mean radius of gyration of the polymer in vacuum. Results show a very good agreement between DT calculations and the MD numerical experiment. This suggests a further use of DT methods with the necessary input quantities obtained by the only knowledge of some experimental values, i.e., the mean radius of gyration of the chain and the viscosity of the solution, and by a suitable vacuum trajectory, with great savings in computational time required. This offers a theoretical bridge between the experimental static and dynamical properties of polymers.     

Transport properties of alkyltrimethylammonium bromide surfactants in aqueous solutions

Differential mutual diffusion coefficients of n-alkyltrimethylammonium bromides [CH₃(CH₂)_n–1N(CH₃)₃Br, C_nTAB] (n=10, 12, 14, 16) have been measured in aqueous solutions at 298.15 K using a conductimetric cell and an automatic apparatus to follow diffusion. The cell is based on an open-ended capillary, and the technique follows the diffusion process by measuring the resistance of a solution inside the capillaries at various times. The electrical conductances of those solutions have also been measured to calculate the critical micellar concentration (cmc). Thermodynamic analysis of the data suggests that the free ion concentration decreases at concentrations above the cmc, in agreement with theoretical predictions. The obtained values of the micellization parameters were used to model the mutual diffusion coefficients of C_nTAB aqueous solutions.     

Accurate tracer diffusion coefficients of Na+ and Cl− ions in dilute aqueous sodium chloride solutions measured with the closed capillary method

A simple and absolute closed capillary method is introduced for measuring tracer diffusion coefficients in liquids with both - and -active tracers. In this method a narrow capillary is partially filled with a labelled solution and an unlabelled solution is used to fill the rest of the capillary. The diffusion coefficient is obtained from the time dependence of the monitored activity when the length of the capillary is known. The method has been tested by remeasuring the tracer diffusion coefficients of²²NaCl and Na³⁶Cl for solutions covering a wide range of total NaCl concentration. The average precision of the measurements was about 0.3%. The results obtained for Na³⁶Cl tracer diffusion are in good agreement with the data found in literature. The²²NaCl tracer diffusion coefficients that were measured in dilute solutions agree well with those obtained using the continuous open-ended capillary method but differ from results for solutions between 0.1 and 1M obtained with the diaphragm cell method.     

Mechanism of the electrochemical conversion of aryl halides to arylzinc compounds by cobalt catalysis in DMF/pyridine

The study of the electrochemical behavior of cobalt bromide, CoBr2, in the presence of zinc bromide, ZnBr2, and aryl halides, ArX, in a dimethylformamide (DMF)/pyridine (9:1, v/v) mixture allowed us to complete the study of the mechanism of the electrochemical conversion of aryl halides into arylzinc compounds by using cobalt catalysis. The last step of the catalytic process has been shown to be a transmetalation reaction between the arylcobalt(II) species and zinc ions that regenerates the cobalt(II) catalyst. The effect of zinc bromide on each step of the catalytic cycle has been studied. It is especially shown that the presence of ZnBr2 stabilizes the electrogenerated Co1 but has no effect on the rate constant of the oxidative addition of aryl halides, ArX, to Co1. Rate constants for the disproportionation reaction of Co1 and the oxidative addition have been determined in the presence of ZnBr2 and compared with the values obtained in its absence.     

金属溶剂萃取的热力学研究(Ⅶ)——2-乙基己基膦酸单(2-乙基己基)酯-硫酸钻-硫酸铜体系

本文提出了具有相同电荷的同号离子间作用力相等的假定, 简化了Pitzer的电解质溶液活度系数计算公式, 用此公式, 计算了H_2SO_4-CoSO_4-CuSO_4水相体系各单个离子活度系数以及水的渗透系数。本文还应用由作者提出的工作参考态法, 应用改进的Scatchard-Hildebrand模型计算了EHEHPA-CoSO_4-CuSO_4萃取体系中有机相各组分的活度系数以及萃取反应热力学平衡常数.     

Kinetics of liquid annulus formation and capillary forces

The dependence of the capillary adhesion force F(cap) between a silica microsphere and a flat silica surface versus a time period t of the samples' contact (i.e., dwell-in time) is experimentally investigated using atomic force microscopy (AFM). F(cap) was found to be dependent on t if the humidity was >30-35%. This dependence is exponential, with decay (characteristic) times of ～10 s. It is suggested that the kinetics of the adhesion process are related to the growth of the water annulus between surfaces. Furthermore, we propose that the growth kinetics has two components: (1) water vapor diffusion from the surrounding humid media into the gap between samples and (2) water drainage from the gap. The theory of diffusion through thin pores (i.e., gaps) is developed, and analytical formulas are obtained for the dependence of the meniscus radius r versus time t. However, the experimental dependence of F(cap) versus t and, consequently, r versus t obtained in this article disagrees with the theoretical prediction by several orders of magnitude. Similar results were obtained from the literature data for capillary forces between an AFM cantilever tip and a flat surface. Possible reasons for the deviation from diffusion theory are suggested: surface and Knudsen regimes of vapor diffusion, nonsteady state vapor flow, and tortuosity. Taking into account the viscous drainage of water from the multilayer gap can explain the experimental kinetics of bridge formation, but only if the viscosity of the adjacent multilayer of water is several orders of magnitude larger than the bulk viscosity.     

Capillary diffusion and interfacial kinetics

Mathematical expressions have been derived to show how the rate constant for the interfacial transfer of a solute between two immiscible phases may be found using a capillary diffusion technique. Laplace transform theory has been used to develop the equations, and theoretical concentration profiles illustrating the dependence upon the interfacial kinetics are presented.     

Interferences of three elements in flame photometry Cr-Co-Mn system

The correction methods proposed by two of the authors (F.B-M and J.R-M ), for interferential systems of two or three elements in flame photometry, have been applied to the interferential effects that occur in solutions containing chromium, cobalt and manganese, all three elements being present or combinations of two of them.A comparison has been made of the different systems in aqueous and sulphuric acid solutions, with concentrations which varied between 50 and 500 p.p.m. of cobalt or manganese and between 200 and 2000 p.p.m. of chromium.The correction methods that may be applied to experimental values obtained by flame photometry with these systems have been indicated. A series of examples have also been included in order to show the results obtained with prepared solutions of known concentration and with samples previously analysed by chemical methods.Finally, the possibility of increasing the accuracy of the methods by means of a double correction has been considered.     

An Integrated Two Phases Approach to Zn2+ Ions Electroreduction on Hg

The following two numerical models have been applied to zinc cations electroreduction in 1 M NaClO₄ water solution: a classical EE model describing the concentration of involved species in solution (semi infinitive diffusion region), an extended EE model describing both: the concentration of involved species in solution and the concentration of metallic zinc inside mercury drop (in limited area of diffusion). In the latter model the inner part of mercury drop and surrounding solution were treated as dynamic interrelated system. Both models were applied to experimental cyclic voltammetric CV data in 1 M NaClO₄, the results compared and discussed. The concentration profiles of all species including metallic zinc inside mercury drop were performed. The presented integrated model is essential for theoretical and analytical aspects of the electrochemistry of mercury soluble metal cations and amalgams.