Synthesis of well‐defined,soluble poly(3‐alkyl‐4‐benzamide) by chain‐growth condensation polymerization

Well‐defined poly(3‐alkyl‐4‐benzamide) was synthesized by means of chain‐growth condensation polymerization of phenyl 3‐octyl‐4‐(4‐octyloxybenzyl(OOB)amino)benzoate ( 1c ) from initiator 2 , followed by removal of the OOB groups on amide nitrogen of poly 1c . Polymerization of 1c with phenyl 4‐(trifluoromethyl)benzoate ( 2b ) in the presence of 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) and LiCl in THF at ?10 °C gave poly 1c with a narrow molecular weight distribution (M_w/M_n ≤ 1.08) and a well‐defined molecular weight (M_n = 4480–12,700) determined by the feed ratio of monomer to initiator (from 10 to 30). The OOB groups of poly 1c were removed with H₂SO₄ to give the corresponding N‐unsubstituted poly(p‐benzamide) (poly 1c′ ) with low polydispersity. The solublity of poly 1c′ in polar organic solvents was dramatically higher than that of poly(p‐benzamide), demonstrating that introduction of an alkyl group on the aromatic ring is very effective for improving the solubility of poly(p‐benzamide). © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 360–365     

Chain‐growth condensation polymerization approach to synthesis of well‐defined polybenzoxazole: Importance of higher reactivity of 3‐amino‐4‐hydroxybenzoic acid ester compared to 4‐amino‐3‐hydroxybenzoic acid ester

Application of chain‐growth condensation polymerization (CGCP) to obtain well‐defined polybenzoxazole (PBO) was examined. CGCP of both phenyl 3‐{(2‐methoxyethoxy)methoxy (MEM‐oxy)}‐4‐(octylamino)benzoate ( 1b ) (para‐substituted monomer) and phenyl 4‐MEM‐oxy‐3‐(octylamino)benzoate ( 3b ) (meta‐substituted monomer) was examined in the presence of metal disilazide base and phenyl 4‐nitro‐ or methylbenzoate 2 as an initiator. Polymerization of the latter monomer, but not the former, afforded polymer with controlled molecular weight based on the feed ratio of monomer to initiator and with a narrow molecular weight distribution. Accordingly, monomer 3c , in which the octyl group on the amino nitrogen of 3b was replaced with a 4‐(octyloxy)benzyl (OOB) group, was polymerized in the presence of lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS), phenyl 4‐methylbenzoate ( 2b ), and LiCl in THF at 0 °C to yield poly 3c with well‐defined molecular weight (M_n = 4520–9080) and low polydispersity (M_w/M_n ≤ 1.11). Treatment of poly 3c with trifluoroacetic acid simultaneously removed the MEM and OOB groups, affording poly(o‐hydroxyamide) (poly 4 ) without scission of the amide linkages. Cyclodehydration of poly 4 proceeded at 350 °C to yield PBO (poly 5 ), which was insoluble in organic solvents and acids. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1730–1736     

Titanium complexes of dialkanolamine ligands as initiators for living ring‐opening polymerization of ε‐caprolactone

The titanium complexes with one ( 1a , 1b , 1c ) and two ( 2a , 2b ) dialkanolamine ligands were used as initiators in the ring‐opening polymerization (ROP) of ε‐caprolactone. Titanocanes 1a and 1b initiated living ROP of ε‐caprolactone affording polymers whose number‐average molecular weights (M_n) increased in direct proportion to monomer conversion (M_n ≤ 30,000 g mol^?1) in agreement with calculated values, and were inversely proportional to initiator concentration, while the molecular weight distribution stayed narrow throughout the polymerization (M_w/M_n ≤ 1.2 up to 80% monomer conversion). ¹H‐NMR and MALDI‐TOF‐MS studies of the obtained poly(ε‐caprolactone)s revealed the presence of an isopropoxy group originated from the initiator at the polymer termini, indicating that the polymerization takes place exclusively at the Ti–OⁱPr bond of the catalyst. The higher molecular weight polymers (M_n ≤ 70,000 g mol^?1) with reasonable MWD (M_w/M_n ≤ 1.6) were synthesized by living ROP of ε‐caprolactone using spirobititanocanes ( 2a , 2b ) and titanocane 1c as initiators. The latter catalysts, according MALDI‐TOF‐MS data, afford poly(ε‐caprolactone)s with almost equal content of α,ω‐dihydroxyl‐ and α‐hydroxyl‐ω(carboxylic acid)‐terminated chains arising due to monomer insertion into “Ti–O” bond of dialkanolamine ligand and from initiation via traces of water, respectively. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1230–1240, 2010     

Living cationic polymerization of 2‐adamantyl vinyl ether

Living cationic polymerization of 2‐adamantyl vinyl ether (2‐vinyloxytricyclo[3.3.1.1]^3,7decane; 2‐AdVE) was achieved with the CH₃CH(OiBu)OCOCH₃/ethylaluminum sesquichloride/ethyl acetate [CH₃CH(OiBu)OCOCH₃/Et_1.5AlCl_1.5/CH₃COOEt] initiating system in toluene at 0 °C. The number‐average molecular weights (M_n's) of the obtained poly(2‐AdVE)s increased in direct proportion to monomer conversion and produced the polymers with narrow molecular weight distributions (MWDs) (M_w/M_n = ～1.1). When a second monomer feed was added to the almost polymerized reaction mixture, the added monomer was completely consumed and the M_n's of the polymers showed a direct increase against conversion of the added monomer. Block and statistical copolymerization of 2‐AdVE with n‐butyl vinyl ether (CH₂?CH? O? CH₂ CH₂CH₂CH₃; NBVE) were possible via living process based on the same initiating system to give the corresponding copolymers with narrow MWDs. Grass transition temperature (T_g) and thermal decomposition temperature (T_d) of the poly(2‐AdVE) (e.g., M_n = 22,000, M_w/M_n = 1.17) were 178 and 323 °C, respectively. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 1629–1637, 2008     

Ruthenium‐catalyzed fast living radical polymerization of methyl methacrylate: The R?Cl/Ru(Ind)Cl(PPh3)2/n‐Bu2NH initiating system

A fast living radical polymerization of methyl methacrylate (MMA) proceeded with the (MMA)₂? Cl/Ru(Ind)Cl(PPh₃)₂ initiating system in the presence of n‐Bu₂NH as an additive [where (MMA)₂? Cl is dimethyl 2‐chloro‐2,4,4‐trimethyl glutarate]. The polymerization reached 94% conversion in 5 h to give polymers with controlled number‐average molecular weights (M_n's) in direct proportion to the monomer conversion and narrow molecular weight distributions [MWDs; weight‐average molecular weight/number‐average molecular weight (M_w/M_n) ≤ 1.2]. A poly(methyl methacrylate) with a high molecular weight (M_n ～ 10⁵) and narrow MWD (M_w/M_n ≤ 1.2) was obtained with the system within 10 h. A similarly fast but slightly slower living radical polymerization was possible with n‐Bu₃N, whereas n‐BuNH₂ resulted in a very fast (93% conversion in 2.5 h) and uncontrolled polymerization. These added amines increased the catalytic activity through some interaction such as coordination to the ruthenium center. © 2002 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 40: 617–623, 2002; DOI 10.1002/pola.10148     

Living cationic polymerization of vinyl ethers with a urethane group

To study the possibility of living cationic polymerization of vinyl ethers with a urethane group, 4‐vinyloxybutyl n‐butylcarbamate ( 1 ) and 4‐vinyloxybutyl phenylcarbamate ( 2 ) were polymerized with the hydrogen chloride/zinc chloride initiating system in methylene chloride solvent at ?30 °C ([monomer]₀ = 0.30 M, [HCl]₀/[ZnCl₂]₀ = 5.0/2.0 mM). The polymerization of 1 was very slow and gave only low‐molecular‐weight polymers with a number‐average molecular weight (M_n) of about 2000 even at 100% monomer conversion. The structural analysis of the products showed occurrence of chain‐transfer reactions because of the urethane group of monomer 1 . In contrast, the polymerization of vinyl ether 2 proceeded much faster than 1 and led to high‐molecular‐weight polymers with narrow molecular weight distributions (MWDs ≤ ～1.2) in quantitative yield. The M_n's of the product polymers increased in direct proportion to monomer conversion and continued to increase linearly after sequential addition of a fresh monomer feed to the almost completely polymerized reaction mixture, whereas the MWDs of the polymers remained narrow. These results indicated the formation of living polymer from vinyl ether 2 . The difference of living nature between monomers 1 and 2 was attributable to the difference of the electron‐withdrawing power of the carbamate substituents, namely, n‐butyl for 1 versus phenyl for 2 , of the monomers. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2960–2972, 2004     

Chain‐growth condensation polymerization of 4‐aminobenzoic acid esters bearing tri(ethylene glycol) side chain with lithium amide base

Chain‐growth condensation polymerization of p‐aminobenzoic acid esters 1 bearing a tri(ethylene glycol) monomethyl ether side chain on the nitrogen atom was investigated by using lithium 1,1,1,3,3,3‐hexamethyldisilazide (LiHMDS) as a base. The methyl ester monomer 1a afforded polymer with low molecular weight and a broad molecular weight distribution, whereas the polymerization of the phenyl ester monomer 1b at ?20 °C yielded polymer with controlled molecular weight (M_n = 2800–13,400) and low polydispersity (M_w/M_n = 1.10–1.15). Block copolymerization of 1b and 4‐(octylamino)benzoic acid methyl ester ( 2 ) was further investigated. We found that block copolymer of poly 1b and poly 2 with defined molecular weight and low polydispersity was obtained when the polymerization of 1b was initiated with equimolar LiHMDS at ?20 °C and continued at ?50 °C, followed by addition of 2 and equimolar LiHMDS at ?10 °C. Spherical aggregates were formed when a solution of poly 1b in THF was dropped on a glass plate and dried at room temperature, although the block copolymer of poly 1b and poly 2 did not afford similar aggregates under the same conditions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1357–1363, 2010     

Potassium enolates of N,N‐dialkylamides as initiators of anionic polymerization

Stable potassium enolates of N,N‐diethylacetamide [α‐potassio‐N,N‐diethylacetamide ( 1 )], N,N‐diethylpropionamide [α‐potassio‐N,N‐diethylpropionamide ( 2 )], and N,N‐diethylisobutyramide [α‐potassio‐N,N‐diethylisobutyramide ( 3 )] were prepared by the proton abstraction of the corresponding N,N‐diethylamides with diphenylmethylpotassium (Ph₂CHK) or potassium naphthalenide in THF. The relative nucleophilicity of 1 – 3 was estimated to be in the order of 1 < 3 < 2 from the results of the alkylation reaction with methyl iodide. N,N‐diethylacetamide transferred its α‐proton to 2 quantitatively in THF at 0 °C, whereas no reaction occurred between N,N‐diethylisobutyramide and 2 ; this indicated the relative basicity to be 1 < 2 ～ 3 . Anionic polymerizations of N,N‐diethylacrylamide (DEA) and methyl methacrylate were quantitatively initiated with 2 in THF at ?78 °C, whereas the initiation efficiencies of 2 for styrene and 2‐vinylpyridine were about 2 and 67%, respectively. The initiation of DEA with 1 – 3 at ?78 or 0 °C in THF gave poly (DEA)s having broad molecular weight distributions (MWDs; M_w/M_n = 2) and ill‐controlled molecular weights. In contrast, poly(DEA)s of narrow MWDs (M_w/M_n < 1.2) and predicted M_n's were obtained with 2 in the presence of diethylzinc (Et₂Zn) at ?78 °C, whereas the initiations with 1 /Et₂Zn and 3 /Et₂Zn at ?78 °C resulted in poor control of the molecular weights. At the higher temperature of 0 °C, all the binary initiator systems ( 1 – 3 /Et₂Zn) induced controlled polymerizations of DEA in terms of the conversion, molecular weight, and MWD. The poly(DEA)s produced with 1 – 3 /Et₂Zn at 0 °C showed mr‐rich configurations (mr = 76–89%), as observed for the poly(DEA) generated with Ph₂CHK/Et₂Zn. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 1260–1271, 2007     

Controlled ring‐opening polymerization of l‐lactide and ε‐caprolactone catalyzed by aluminum‐based Lewis pairs or Lewis acid alone

Ring‐opening polymerization of cyclic esters was studied using catalysts composed of bulky Lewis acids (LA) and Lewis bases (LB). Controlled polymerization of l ‐lactide (l ‐Lac) was proceeded by Al(C₆F₅)₃·THF in combination with trimesitylphosphine (Mes₃P) or triphenylphosphine (Ph₃P) using BnOH as an initiator to produce poly(l ‐Lac) with narrow molecular weight distribution (MWD; M_w/M_n = 1.1). Both the LA and the LB were indispensable to promote the polymerization. The molecular weights of the resulting poly(l ‐Lac)s were controlled by the feed monomer to initiator ratio. ε‐Caprolactone (CL) was rapidly polymerized by Al(C₆F₅)₃·THF with or without Mes₃P, although the resulting polymer had rather broad MWD (M_w/M_n = 1.7). The CL polymerization by Al(C₆F₅)₃·THF alone at r.t. gave poly(CL) with relatively narrow MWD (M_w/M_n = 1.2). © 2016 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017 , 55, 297–303     

Iron‐catalyzed living radical polymerization of acrylates: Iodide‐based initiating systems and block and random copolymerizations

A half‐metallocene iron iodide complex [Fe(Cp)I(CO)₂] induced living radical polymerization of methyl acrylate (MA) in conjunction with an iodide initiator [(CH₃)₂C(CO₂Et)I, 1 ] and Al(Oi‐Pr)₃ to give polymers of controlled molecular weights and narrow molecular weight distributions (MWDs) (M_w/M_n < 1.2). With the use of chloride and bromide initiators, the MWDs were broader, whereas the molecular weights were similarly controlled. Other acrylates such as n‐butyl acrylate (nBA) and tert‐butyl acrylate (tBA) can be polymerized with 1 /Fe(Cp)I(CO)₂ in the presence of Ti(Oi‐Pr)₄ and Al(Oi‐Pr)₃, respectively, to give living polymers. The 1 /Fe(Cp)I(CO)₂ initiating system is applicable for the synthesis of block and random copolymers of acrylates (MA, nBA, and tBA) and styrene of controlled molecular weights and narrow MWDs (M_w/M_n = 1.2–1.3). © 2002 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 40: 2033–2043, 2002     

Preparation of poly(ethylene oxide)‐block‐poly(isoprene) by nitroxide‐mediated free radical polymerization from PEO macroinitiators

Amphiphilic poly(ethylene oxide)‐block‐poly(isoprene) (PEO‐b‐PI) diblock copolymers were prepared by nitroxide‐mediated polymerization of isoprene from alkoxyamine‐terminal poly(ethylene oxide) (PEO). PEO monomethyl ether (M_n ≈ 5200 g/mol) was functionalized by esterification with 2‐bromopropionyl bromide with subsequent copper‐mediated replacement of the terminal bromine with 2,2,5‐trimethyl‐4‐phenyl‐3‐azahexane‐3‐nitroxide. The resulting PEO‐alkoxyamine macroinitiator was used to initiate polymerization of isoprene in bulk and in solution at 125 °C to yield PEO‐b‐PI block copolymers with narrow molecular weight distributions (M_w/M_n ≤ 1.1). Polymerizations were first order in isoprene through 35% conversion. Micellar aggregates of PEO‐b‐PI in aqueous solution were crosslinked by treatment with a water‐soluble redox initiating system, and persistent micellar structures were observed in the dry state by AFM. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2977–2984, 2005     

Antithetic function of alcohol in living cationic polymerization: From terminator/inhibitor to useful initiator

We employed alcohols as initiators for living cationic polymerization of vinyl ethers and p‐methoxystyrene, coupled with tolerant Lewis acid, borontrifluoride etherate (BF₃OEt₂), although they were known to be poisonous reagent to bring about chain‐breaking such as chain transfer/termination rather than such beneficial one for propagation and polymerization‐control. As well known, without assistance of additive, ill‐defined polymers with broad molecular weight distributions (MWDs) were produced. Even addition of conventional oxygen‐based bases, for example, ethyl acetate (AcOEt), 1,4‐dioxane (DO), tetrahydrofran (THF), and diethyl ether (Et₂O) was less efficient in this system to control molecular weights and MWDs (M_w/M_n > 2.0). In contrast, by addition of dimethyl sulfide (Me₂S), MWDs of the resultant polymers became much narrower (M_w/M_n < 1.23) and the number‐average molecular weight (M_n) increased in direct proportion to monomer conversion in agreement with the calculated values assuming that one alcohol molecule generates one polymer chain. Studying changed feed‐ratio of alcohol to monomer and structural analyses with NMR and MALDI‐TOF‐MS indicated that quantitative initiation from alcohol giving alkoxide counteranion. This system opens a new way to use a variety of alcohols as initiators, which would allow us to design variety of structures and functions of counteranion. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4194–4201, 2009     

Construction of PIB‐b‐PDEAEMA well‐defined amphiphilic diblock copolymers via sequential living carbocationic and RAFT polymerization

A series of well‐defined amphiphilic diblock copolymers consisting of hydrophobic polyisobutylene (PIB) and hydrophilic poly(2‐(diethylamino)ethyl methacrylate) (PDEAEMA) segments was synthesized via the combination of living carbocationic polymerization and reversible addition fragmentation chain transfer (RAFT) polymerization. Living carbocationic polymerization of isobutylene followed by end‐capping with 1,3‐butadiene was first performed at ?70 °C to give a well‐defined allyl‐Cl‐terminated PIB with a low polydispersity (M_w/M_n =1.29). This end‐functionalized PIB was further converted to a macromolecular chain transfer agent for mediating RAFT block copolymerization of 2‐(diethylamino)ethyl methacrylate at 60 °C in tetrahydrofuran to afford the target well‐defined PIB‐b‐PDEAEMA diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.22). The self‐assembly behavior of these amphiphilic diblock copolymers in aqueous media was investigated by fluorescence spectroscopy and transmission electron microscope, and furthermore, their pH‐responsive behavior was studied by UV‐vis and dynamic light scattering. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 1478–1486     

Synthesis and polymerization of N‐(4‐tetrahydropyranyl‐oxyphenyl)maleimide

N‐(4‐Tetrahydropyranyl‐oxy‐phenyl)maleimide (THPMI) was prepared and polymerized by radical or anionic initiators. THPMI could be polymerized by 2,2′‐azobis(isobutyronitrile) (AIBN) and potassium tert‐butoxide. Radical polymers (poly(THPMI)r) were obtained in 15–50% yields for AIBN in THF at 65°C after 2–5 h. The yield of anionic polymers (poly(THPMI)a) obtained from potassium tert‐butoxide in THF at 0°C after 20 h was 91%. The molecular weights of poly(THPMI)r and poly(THPMI)a were M_n = 2750–3300 (M_w/M_n = 1.2–3.3) and M_n = 11300 (M_w/M_n = 6.0), respectively. The difference in molecular weights of the polymers was due to the differences in the termination mechanism of polymerization and the solubility of these polymers in THF. The thermal decomposition temperatures were 205 and 365°C. The first decomposition step was based on elimination of the tetrahydropyranyl group from the poly(THPMI). Positive image patterns were obtained by chemical amplification of positive photoresist composed of poly(THPMI) and 4‐morpholinophenyl diazonium trifluoromethanesulfonate used as an acid generator. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 341–347, 1999     

Effect of isomeric pyridine moieties in ethynylstyrene derivatives on their anionic polymerization

The anionic polymerization behaviors of ethynylstyrene derivatives containing isomeric pyridine moieties, 2‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( A ), 3‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( B ), and 4‐(2‐(4‐vinylphenyl)ethynyl)pyridine ( C ), were investigated in the identical conditions. The anionic polymerization of A – C was performed with (diphenylmethyl)potassium (Ph₂CHK) in tetrahydrofuran (THF) at ?78 °C. The polymerization of A proceeded quantitatively at –78 °C for 4 h, and the resulting poly( A ) possessed predictable molecular weights (M_n = 3300–68,500) and narrow molecular weight distributions (MWDs) (M_w/M_n = 1.04–1.11). In contrast, the anionic polymerization of B was not performed at –78 °C for 4 h due to the occurrence of side reactions. The monomer B was quantitatively recovered after the reaction. In the polymerization of C performed at –78 °C for 6 h, observed M_n values of the resulting poly( C ) were in good agreement with calculated molecular weights based on monomer to initiator ratios, but the MWDs were somewhat broad (M_w/M_n = 1.23–1.31). To estimate the reactivity of A and to characterize its living nature, the block copolymerization of A with 2‐vinylpyridine (2VP) and methyl methacrylate (MMA) was performed. The well‐defined block copolymers, poly(2VP)‐b‐poly( A ) and poly( A )‐b‐poly(MMA), were successfully synthesized without any additives. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of well‐defined and end‐polymerizable star‐shaped polysulfides and their application to negative photoresist

Various star‐shaped poly(phenoxy propylene sulfide)s (PPSs) bearing curable end groups were synthesized by the functionalization of the propagating ends of star‐shaped poly(PPS) with various electrophilies. The functionalization with chloromethyl styrene proceeded quantitatively, and afforded polymers with M_n almost agreed with theoretical value and narrow M_w/M_n. The photocuring conditions were optimized, and the addition of 10 wt % of poly(ethylene glycol) diacrylate was effective to attain sufficient crosslinking. The photocuring reaction of the end‐functionalized poly(PPS) films cast on silicon wafers was conducted by UV irradiation. The cured poly (PPS)s became insoluble in THF, supporting the sufficient crosslinking. Developing of a cured polymer yielded a negative photoresist pattern. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Synthesis and characterization of poly[styrene‐b‐methyl(3,3,3‐trifluoropropyl)siloxane] diblock copolymers via anionic polymerization

A series of narrow molecular weight distribution (MWD) polystyrene‐b‐poly[methyl(3,3,3‐trifluoropropyl)siloxane] (PS‐b‐PMTFPS) diblock copolymers were synthesized by the sequential anionic polymerization of styrene and trans‐1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane in tetrahydrofuran (THF) with n‐butyllithium as the initiator. The diblock copolymers had narrow MWDs ranging from 1.06 to 1.20 and number‐average molecular weights ranging from 8.2 × 10³ to 37.1 × 10³. To investigate the properties of the copolymers, diblock copolymers with different weight fractions of poly[methyl(3,3,3‐trifluoropropyl)siloxane] (15.4–78.8 wt %) were prepared. The compositions of the diblock copolymers were calculated from the characteristic proton integrals of ¹H NMR spectra. For the anionic ring‐opening polymerization (ROP) of 1,3,5‐trimethyl‐1,3,5‐tris(3′,3′,3′‐trifluoropropyl)cyclotrisiloxane (F₃) initiated by polystyryllithium, high monomer concentrations could give high polymer yields and good control of MWDs when THF was used as the polymerization solvent. It was speculated that good control of the block copolymerization under the condition of high monomer concentrations was due to the slowdown of the anionic ROP rate of F₃ and the steric hindrance of the polystyrene precursors. There was enough time to terminate the ROP of F₃ when the polymer yield was high, and good control of block copolymerization could be achieved thereafter. The thermal properties (differential scanning calorimetry and thermogravimetric analysis) were also investigated for the PS‐b‐PMTFPS diblock copolymers. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4431–4438, 2005     

Polyisobutylene‐b‐Poly(N,N‐diethylacrylamide) well‐defined amphiphilic diblock copolymer: Synthesis and thermo‐responsive phase behavior

Polyisobutylene‐b‐poly(N,N‐diethylacrylamide) (PIB‐b‐PDEAAm) well‐defined amphiphilic diblock copolymers were synthesized by sequential living carbocationic polymerization and reversible addition‐fragmentation chain transfer (RAFT) polymerization. The hydrophobic polyisobutylene segment was first built by living carbocationic polymerization of isobutylene at ?70 ° C followed by multistep transformations to give a well‐defined (M_w/M_n = 1.22) macromolecular chain transfer agent, PIB‐CTA. The hydrophilic poly(N,N‐diethylacrylamide) block was constructed by PIB‐CTA mediated RAFT polymerization of N,N‐diethylacrylamide at 60 ° C to afford the desired well‐defined PIB‐b‐PDEAAm diblock copolymers with narrow molecular weight distributions (M_w/M_n ≤1.26). Fluorescence spectroscopy, transmission electron microscope, and dynamic light scattering (DLS) were employed to investigate the self‐assembly behavior of PIB‐b‐PDEAAm amphiphilic diblock copolymers in aqueous media. These diblock copolymers also exhibited thermo‐responsive phase behavior, which was confirmed by UV‐Vis and DLS measurements. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1143–1150     

Control of chain ends of polyesters in polycondensation of AA and BB monomers by use of solid‐phase reagent

For selective synthesis of linear polyester having a functional group at one end, polycondensation between 1,4‐butanediol ( 1a ) and sebacoyl chloride ( 2a ) and between 1,12‐dodecanediol ( 1b ) and isophthaloyl chloride ( 2b ) was conducted in the presence of oxime resin or oxime silica gel, followed by cleavage of the formed polyester from the solid‐phase support with aniline. Matrix‐assisted laser desorption ionization time‐of‐flight mass spectra and ¹H NMR spectra of the cleaved polyester showed that the products contained not only polyester with anilide at one end ( poly 1 ), but also polyester with anilides at both ends ( poly 2 ). The product ratio of poly 1 to poly 2 ( poly 1 / poly 2 ) was dependent on monomers, monomer concentration, feed ratio of monomer to oxime moiety in the support, oxime content in the support, reaction solvent, and the nature of the support. Polyester with a high poly 1 / poly 2 ratio of 81/21 and moderate molecular weight (M_n = 1430 g/mol) was obtained by polycondensation of 1b and 2b in the presence of oxime silica gel in dichloromethane. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2015 , 53, 1379–1386     

Synthesis of poly(β‐pinene)‐g‐poly(meth)acrylate by the combination of living cationic polymerization and atom transfer radical polymerization

New graft copolymers of β‐pinene with methyl methacrylate (MMA) or butyl acrylate (BA) were synthesized by the combination of living cationic polymerization and atom transfer radical polymerization (ATRP). β‐Pinene polymers with predetermined molecular weights and narrow molecular weight distributions (MWDs) were prepared by living cationic polymerization with the 1‐phenylethyl chloride/TiCl₄/Ti(OiPr)₄/nBu₄NCl initiating system, and the resultant polymers were brominated quantitatively by N‐bromosuccinamide in the presence of azobisisobutyronitrile, yielding poly(β‐pinene) macroinitiators with different bromine contents (Br/β‐pinene unit molar ratio = 1.0 and 0.5 for macroinitiators a and b , respectively). The macroinitiators, in conjunction with CuBr and 2,2′‐bipyridine, were used to initiate ATRP of BA or MMA. With macroinitiator a or b , the bulk polymerization of BA induced a linear first‐order kinetic plot and gave graft copolymers with controlled molecular weights and MWDs; this indicated the living nature of these polymerizations. The bulk polymerization of MMA initiated with macroinitiator a was completed instantaneously and induced insoluble gel products. However, the controlled polymerization of MMA was achieved with macroinitiator b in toluene and resulted in the desired graft copolymers with controlled molecular weights and MWDs. The structures of the obtained graft copolymers of β‐pinene with (methyl)methacrylate were confirmed by ¹H NMR spectra. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 1237–1242, 2003