Synthesis of amino‐functionalized latex particles by a multistep method

Cationic latex particles with surface amino groups were prepared by a multistep batch emulsion polymerization. In the first one or two steps, monodisperse cationic latex particles to be used as the seed were synthesized, and in the third step, two different amino‐functionalized monomers [aminoethylmethacrylate hydrochloride (AEMH) and vinylbenzylamine hydrochloride (VBAH)] were used to synthesize the final functionalized latex particles. 2,2′‐Azobisisobutyramidine dihydrochloride was used as the initiator, and different concentrations of two quaternary ammonium emulsifiers with hydrophobic chains of different lengths were examined. To characterize the final latexes yields were obtained gravimetrically, and particle size distributions and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The amount of amino groups was determined by fluorimetry. The effect of the amino‐functional monomer used on the final latexes and the colloidal behavior of the system were studied. The influence of the different conditions utilized to synthesize the latexes on the colloidal stability of the particles was evaluated in terms of the Fuchs stability ratio and electrophoretic mobility. High yields of the amino‐functional monomers were obtained. Surface amino, amidine, and quaternary ammonium groups provided the cationic character. The colloidal stability behavior of the products obtained was compatible with their cationic character. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2929–2936, 2001     

Synthesis of highly reactive polyisobutylenes using solvent‐ligated manganese(II) complexes as catalysts

Manganese complexes with benzonitrile ligands were synthesized, characterized, and applied for the preparation of the isobutylene polymerization. Low and medium molecular weight polyisobutylenes containing high amount of exo‐type double bond end groups (70–80%) were successfully prepared using these manganese(II) complexes as catalysts at room temperature. The influence of monomer and catalyst concentration was intensively analyzed for achieving high monomer conversion and high exo double bond content of the products. Details on end group distribution in the products and development of the exo‐type end group content with reaction time were evaluated by ¹H NMR. The catalysts are also active for the homopolymerization of styrene and the copolymerization of isobutylene and styrene. The highly reactive polyisobutylene products obtained by these manganese complexes show features similar to products obtained by conventional cationic polymerization, but the polymerization characteristics clearly deviate. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5636–5648, 2007     

Reversible fixation and release of carbon dioxide with a binary system consisting of polyethylene glycol and polystyrene‐bearing cyclic amidine pendant group

In this study, we investigated the CO₂‐capture/release behavior of the polystyrene‐bearing cyclic amidine pendant groups, which was synthesized via free radical polymerization of HCl salt of the corresponding styrene monomer followed by neutralization. For comparison, we also prepared the polystyrene bearing N‐formyl‐1,3‐propanediamine pendant groups through the hydrolysis of the cyclic amidine group by treatment with an alkaline solution. First, we examined the CO₂‐capture/release behaviors of the amidine and amine monomers in aqueous solution in terms of conductivity. The conductivity of a wet DMSO solution of the amidine monomer increased upon CO₂ bubbling at 25 °C and reached a stationary value of about 11 mS/m, which indicated the formation of the bicarbonate salt. Conversely, the conductivity decreased to its original value upon N₂ bubbling at 50 °C, reflecting the complete release of the trapped CO₂ molecules. Both solutions showed the changes in the conductivity with quick responses, and no appreciable difference was observed between them. We then investigated the CO₂‐capture/release behaviors of the amidine and amine polymers, by taking advantage of the binary system with polyethylene glycol, and found that the binary system with the amidine polymer captured and released CO₂ more efficiently than that with the amine polymer. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 2025–2031     

Amino‐functionalized latex particles obtained by a multistep method: Development of a new immunoreagent

Cationic latex particles with surface amino groups were prepared by a multistep batch emulsion polymerization. In the first one, two or three steps, monodisperse cationic latex particles to be used as the seed were synthesized. In the third and fourth steps, the amino‐functionalized monomer aminoethylmethacrylate hydrochloride was used to synthesize the final functionalized latex particles. Three different azo initiators 2,2′‐azobisisobutyramidine dihydrochloride, 2,2′‐azobisdimethylenisobutyramidine dihydrochloride, and 2,2′‐azobisisobutyronitrile were used as initiators. Hexadecyltrimethylammonium bromide was the emulsifier. To characterize the final latices, conversions were obtained gravimetrically, and particle size distributions and average particle diameters were determined by transmission electron microscopy and photon correlation spectroscopy. The amount of amino groups was determined by conductimetric titrations. Colloidal aspects were ascertained by measuring the electrophoretic mobilities. Activation of these particles with glutaraldehyde produced an efficient reagent for latex‐enhanced immunoassay. The covalent coupling efficiency (protein covalently bound with respect to the total amount of protein adsorbed) was compressed between 50 and 80%. The developed immunoreagent was applied to the measurement of serum ferritin concentration in a new turbidimetric procedure that was compared with a commercial nephelometric method; the results obtained with both methods demonstrated that the two procedures correlated well (r = 0.992). © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2404–2411, 2003     

Hydrazine‐functionalized latexes

The noncommercial functional monomer 4‐vinylbenzyl hydrazine (VBH) was synthesized and subsequently copolymerized with styrene (St) by means of different batch and semicontinuous seeded emulsion polymerization processes, so as to obtain hydrazine‐functionalized nanoparticles. The effect of pH, surfactant and initiator amounts, ratio VBH/St, reaction temperature, and ratio acetone/water were studied. Due to the amphiphilic character of VBH at acid pH, the hydrazine groups of the functionalized comonomer were masked with acetone to form hydrazone groups. Secondary nucleations were avoided by using the protected VBH comonomer; however, a decreased radical efficiency achieving limited conversion was observed. Controlling the cationic initiator concentration, complete conversions together with the neat growth of the seed particles were obtained in the semicontinuous seeded emulsion polymerization of styrene and VBH protected with acetone. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 6201–6213, 2009     

Interaction and ionic network formation process between polyamidine and nonlinear optically active dyes

Interactions of phenolic and carboxylic groups containing chromophores (hydroxyarylidene alkanones) with polyamidines were investigated with ultraviolet–visible spectroscopy and dynamic light scattering experiments. Because of the strong basicity of the polyamidines, deprotonation of the chromophores was observed. The ionic network formation process depended on the method of the complex preparation. The step‐by‐step addition of the chromophore to an excess of polyamidine led to the incorporation of the dye molecules inside the polymer coil, and only after this did the interaction of surface functional groups with an additional amount of the low‐molecular‐weight compound lead to network formation. The interaction of the polymer with an excess of the dye initially led to the saturation of amidine groups by chromophore molecules and network formation without the complete destruction of the dye packs. The molecular structure proposed for these complexes was examined with experimental data. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 398–404, 2005     

Redox initiated cationic polymerization: Silane‐N‐aryl heteroaromatic onium salt redox couples

In this article, a new route for the synthesis of N‐aryl heteroaromatic onium salts by the direct copper catalyzed arylation of pyridine, substituted pyridines, isoquinoline, and acridine with diaryliodonium salts is described. It was demonstrated that these N‐aryl heteroaromatic onium salts undergo facile platinum or rhodium‐catalyzed reduction by silanes bearing Si? H groups. The reduction of N‐aryl heteroaromatic onium salts generates Brønsted acids. When this redox reaction was carried out in situ in the presence of an appropriate monomer, cationic polymerization was observed. Using this approach, the cationic polymerizations of epoxides, oxetanes, 1,3,5‐trioxane, styrene, and vinyl ethers were carried out. The use of optical pyrometry to monitor the redox initiated cationic polymerizations of some representative multifunctional monomers is described. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Grafting of amino functional monomer onto initiator-modified polystyrene particles

Polystyrene nanoparticles with grafted chains of an amino functionalized polymer were prepared by a two-step polymerization process. In the first step, the polystyrene seed particles were synthesized by the conventional batch emulsion polymerization using terpolymer HAS (hydroperoxide monomer, acrylic acid, and styrene) as a surface-active initiator. The surface of the obtained particles contains carboxyl groups, which are responsible for the latex stability, and residual undecomposed hydroperoxide groups. Therefore, in the second step, an amino functional monomer was grafted onto the hydroperoxide modified polystyrene particles by a "grafting from" approach. X-ray photoelectron spectroscopy, NMR, and scanning electron microscopy were used to examine the surface of the amino functionalized particles. The amount of incorporated amino groups onto the particles was determined by fluorescenometric titration. In general, the number of amino groups on the particle surface increased with the increase of the functional monomer content in the reaction mixture. The incorporation of the functional monomer was also confirmed by electrophoretic measurements. Final particles possess amphoteric character due to the presence of amino and carboxyl groups on the surface. Adsorption of human immunoglobulins G onto the amino functionalized particles was studied as a function of pH and ionic strength. The covalent binding of human IgG was performed using the glutaraldehyde preactivation method. The immunoreactivity of the latex-IgG complex was examined by the latex agglutination test.     

Microemulsion copolymerization of styrene and acrylonitrile with n‐butanol as the cosurfactant

The microemulsion copolymerization of styrene and acrylonitrile in an n‐butanol/cetyltrimethylammonium bromide/oil/water microemulsion system was studied. The solubilization sites of the two monomers were determined with an NMR technique. The results showed that the solubilization behaviors of the two monomers were quite different. Most of the styrene was solubilized in the palisade layer of the microemulsion, whereas the acrylonitrile had an equilibrium distribution in the aqueous phase and palisade layer of the microemulsion. The reactivity ratios of styrene and acrylonitrile in the microemulsion system were different from those in other media. The effect of the monomer feed composition on the copolymerization kinetics was investigated, and the mechanism of nucleation of the latex particles was examined. The experimental results showed that the copolymerization loci were changed from the microemulsion droplets to the aqueous phase when the concentration of acrylonitrile in the monomer feed reached approximately 80%; this could be further proved by the effect of the monomer feed composition on the copolymerization kinetics. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 203–216, 2005     

Nucleation of gold nanoparticles on latex particle surfaces

Gold particles were nucleated on functionalized (i.e., sulfonate or imidazole groups) latex particle surfaces. Gold ions were associated with the functional groups present on the surface of the latex particles by metal‐ligand formation and were then reduced to nucleate gold particles on the particle surface. The use of imidazole groups favored the metal‐ligand formation more effectively compared with sulfonic acid groups, so gold nucleation was investigated on the surface of imidazole‐functionalized model latex particles. The desorption of gold atoms or their surface migration first occurred during the reduction process and then gold nanoparticles were nucleated. The utilization of strong reductants, such as NaBH₄ and dimethylamine borane (DMAB) under mildly acidic conditions (i.e., pH 4) led to the deprotonation of imidazole‐rich polymer chains present on the surface of the model latex particles followed by deswelling of hydrophilic polymer surface layers. As a result, well‐dispersed gold nanoparticles were embedded in the hydrophilic polymer surface. On the other hand, the use of weak reductants led to the formation of localized gold aggregates on the surface of the latex particles. The removal of residual styrene monomer is very important because gold ions can be coordinated with the vinyl groups present in styrene monomer and would then be reduced by nucleophilic water addition. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 912–925, 2008     

Growth of polystyrene films via gas‐phase polymerization with [Pd(CH3CN)4][BF4]2 thin film catalyst

The heterogeneous catalytic polymerization of styrene vapor with a tetrakis(acetonitrile)palladium(II) tetrafluoroborate, [Pd(CH₃CN)₄][BF₄]₂, thin film has been demonstrated. The catalyst is deposited by nebulization of dilute solutions onto a quartz crystal microbalance (QCM) and then exposed to styrene vapor in controlled environments. The use of QCM allows in situ monitoring of catalyst deposition and polymer growth kinetics. The polymerization process appears to involve the entire catalyst film rather than polymerization only at the catalyst film surface. The styrene vapor polymerization occurs rapidly after a short induction time needed for monomer dissolution and catalyst activation. The narrow molecular weight distribution of the produced polymer suggests that the deposited film acts as a single site catalyst. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 1930–1934, 2005     

Poly(styrene‐co‐glycerol dimethacrylate): Synthesis,characterization, and application as a resin for gel‐phase peptide synthesis

An efficient cross‐linked polymer support for solid‐phase synthesis was prepared by introducing glycerol dimethacrylate cross‐linker to polystyrene network using free radical aqueous suspension polymerization. The support was characterized by various spectroscopic methods. Morphological feature of the resin was analyzed by microscopy. The polymerization reaction was investigated with respect to the effect of amount of cross‐linking agent, which in turn vary the swelling, loading, and the mechanical stability of the resin. The solvent uptake of the polymer was studied in relation to cross‐linking and compared with Merrifield resin. The stability of the resin was tested in different synthetic conditions used for solid‐phase peptide synthesis. Hydroxy group of the support was derivatized to chloro and then amino groups using different reagents and reaction conditions. Efficiency of the support was tested and compared with TentaGel? resin by following different steps involved in the synthesis of the 65–74 fragment of acyl carrier protein. The results showed that the poly(styrene‐co‐glycerol dimethacrylate) (GDMA‐PS) is equally efficient as TentaGel resin in peptide synthesis. The purity of the peptides was analyzed by HPLC and identities were determined by mass spectroscopy and amino acid analysis. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4382–4392, 2005     

Automated parallel anionic polymerizations: Enhancing the possibilities of a widely used technique in polymer synthesis

Anionic polymerization techniques have been implemented successfully in a commercial automated synthesizer. The main problems for a successful adaptation of the experimental technique in the automated synthesizer are addressed, as well as some simple potential applications, such as the anionic polymerization of styrene, isoprene, and methyl methacrylate. The obtained results were reproducible and in concordance with literature knowledge. The apparent rate constant of the anionic polymerization of styrene in cyclohexane initiated by sec‐butyllithium could be determined at two different concentrations of the monomer and initiator in a temperature range of 10–60 °C. All the synthesis and characterization experiments of the polymers were performed within a short time period. Moreover, the syntheses of poly(styrene‐b‐isoprene) and poly(styrene‐b‐methyl methacrylate) block copolymers were also successfully carried out within the automated synthesizer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4151–4160, 2005     

Gel forming waterborne dispersion polymerization of sodium p‐styrene sulfonate with glycidyl methacrylate

Water soluble monomer like sodium p‐styrene sulfonate (SSS) is copolymerized with hydrophobic and reactive monomer glycidyl methacrylate (GMA). The polymerization proceeds as dispersion and forms gels. The gel forming nature prevails even with other hydrophobic and hydrophilic monomers to form ternary polymeric systems. The swelling is dependent on polymer composition as well as the treatment history of polymers. SSS also induces ring opening of GMA to form 1,2‐diols as confirmed independently by various model reactions. The ability of hydrogels to absorb various dyes indicates that owing to the anionic nature, hydrogels absorb cationic dyes nearly quantitatively. Because of their strong affinity to cationic species these hydrogel forming polymers are potentially useful in water purification applications as well as purification of proteins. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2018 , 56, 626–634     

Densely grafting copolymers of ethyl cellulose through atom transfer radical polymerization

Densely grafting copolymers of ethyl cellulose with polystyrene and poly(methyl methacrylate) were synthesized through atom transfer radical polymerization (ATRP). First, the residual hydroxyl groups on the ethyl cellulose reacted with 2‐bromoisobutyrylbromide to yield 2‐bromoisobutyryloxy groups, known to be an efficient initiator for ATRP. Subsequently, the functional ethyl cellulose was used as a macroinitiator in the ATRP of methyl methacrylate and styrene in toluene in conjunction with CuBr/N,N,N′,N″,N″‐pentamethyldiethylenetriamine as a catalyst system. The molecular weight of the graft copolymers increased without any trace of the macroinitiator, and the polydispersity was narrow. The molecular weight of the side chains increased with the monomer conversion. A kinetic study indicated that the polymerization was first‐order. The morphology of the densely grafted copolymer in solution was characterized through laser light scattering. The individual densely grafted copolymer molecules were observed through atomic force microscopy, which confirmed the synthesis of the densely grafted copolymer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 4099–4108, 2005     

Controlled radical polymerization of styrene and methyl acrylate in the presence of reversible addition–fragmentation chain transfer agents,phenylethyl phenyl dithioacetate and phenyldithioacetic acid

The use of phenyldithioacetic acid (PDA) in homopolymerizations of styrene or methyl acrylate produced only a small fraction of chains with dithioester end groups. The polymerizations using 1‐phenylentyl phenyldithioacetate (PEPDTA) and PDA in the same reaction showed that PDA had little or no influence on the rate or molecular weight distribution even when a 1:1 ratio is used. The mechanistic pathway for the polymerizations in the presence of PDA seemed to be different for each monomer. Styrene favors addition of styrene to PDA via a Markovnikov type addition to form a reactive RAFT agent. The polymer was shown by double detection SEC to contain dithioester end groups over the whole distribution. This polymer was then used in a chain extension experiment and the M_n was close to theory. A unique feature of this work was that PDA could be used to form a RAFT agent in situ by heating a mixture of styrene and PDA for 24 h at 70 °C and then polymerizing in the presence of AIBN to give a linear increase in M_n and low values of PDI (<1.14). In the case of the polymerization of MA with PDA, the mechanism was proposed to be via degradative chain transfer. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 5232–5245, 2005     

Graft copolymers from star‐shaped and hyperbranched polystyrene macromonomers

Branched polystyrene macromonomers were synthesized by the slow addition of a stoichiometric amount of either 4‐(chlorodimethylsilyl)styrene or vinylbenzyl chloride as a coupling agent to living polystyryllithium. Star‐shaped macromonomers were produced by the addition of the coupling agent alone, and hyperbranched macromonomers resulted from the addition of the coupling agent along with styrene monomer. Star and hyperbranched graft copolymers were produced by the copolymerization of the macromonomers with styrene and methyl methacrylate. The copolymers were characterized by gel permeation chromatography coupled with multi‐angle laser light scattering, ¹H NMR spectroscopy, and Soxhlet extraction to determine that the macromonomers were incorporated in high yields into the copolymers. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 3547–3555, 2001     

Synthesis,polymerization, and effects on the flame retardancy of boron‐containing styrenic monomers

A boron‐containing styrenic monomer, 5‐benzyl‐2‐phenyl‐5‐(4‐vinylbenzyl)‐[1,3,2]‐dioxaborinane, was synthesized to study the influence of boron on the properties of the homopolymer and copolymer with styrene. A similar monomer without boron was also prepared and polymerized so that the properties of its polymer could be compared with the aforementioned boron‐containing polymers. These monomers were characterized by elemental analysis, mass spectrometry, Fourier transform infrared, and ¹H and ¹³C NMR. The thermal degradation of boron‐containing styrenic polymers was studied by means of Fourier transform infrared, which showed the presence of boric acid as char. The flame‐retardant effect was assessed by the measurement of the limiting oxygen indices and char yields during heating in nitrogen and air. The boron‐containing polymers had higher limiting oxygen indices and gave greater yields of char than those without boron. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem43: 6419–6430, 2005     

Copolymers of 2,5‐bis[(4‐methoxyphenyl) oxycarbonyl]styrene with styrene and methyl methacrylate: Synthesis,monomer reactivity ratios,thermal properties,and liquid crystalline behavior

Copolymers of a liquid crystalline monomer, 2,5‐bis[(4‐methoxyphenyl)oxycarbonyl]styrene (MPCS), with St and MMA were prepared by free radical polymerization at low conversion in chlorobenzene with 2,2′‐azobisisobutyronitrile (AIBN) as initiator. The copolymers of poly(MPCS‐co‐St) and poly(MPCS‐co‐MMA) were characterized by ¹H NMR and GPC. The monomer reactivity ratios were determined by using the extended Kelen–Tudos (EKT) method. Structural parameters of the copolymers were obtained from the possibility statistics and monomer reactivity ratios. The influence of MPCS content in copolymers on the glass transition temperatures of copolymers was investigated by DSC. The thermal stabilities of the two copolymer systems increased with an increase of the molar fraction of MPCS in the copolymers. The liquid crystalline behavior of the copolymers was also investigated using DSC and POM. The results revealed that the copolymers with high MPCS molar contents exhibited liquid crystalline behaviors. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 2666–2674, 2005     

Synthesis,characterization, and utilization of itaconate‐based polymerizable surfactants for the preparation of surface‐carboxylated polystyrene latexes

Two polymerizable surfactants (surfmers), namely, monododecyl itaconate (MDDI) and monocetyl itaconate (MCI), were synthesized by reacting itaconic anhydride with 1‐dodecanol and cetyl alcohol, respectively. A series of uncrosslinked and crosslinked surface‐carboxylated latexes were prepared from styrene and styrene–divinylbenzene, respectively, using varying amounts of these two surfmers. The latexes were characterized by gravimetry, dynamic light scattering, and conductometric titration in order to obtain the conversion, particle size distribution, and concentration of surface carboxyl groups, respectively. The size of latex varied between 41–72 nm and was seen to depend inversely on the surfmer concentration. In the case of the soluble polystyrene latexes, solution ¹H NMR spectra provided conclusive evidence for surfmer incorporation into the polymer chain. Comparison of the incorporation levels determined by NMR with the surface carboxylic acid concentrations in the latexes, determined by conductometric titrations, revealed that the majority of the surfmers, as ancticipated, were present on the latex surface. The study of the stability of the latexes to varying salt concentrations clearly demonstrated that the smaller‐size latexes having higher surface carboxyl group density exhibited far improved stability when compared with the larger‐size ones having lower surface carboxyl group density. Similarly, enhanced freeze‐thaw stability was also observed for the smaller‐size latexes. MCI‐based latexes exhibited marginally improved stability compared with those prepared using MDDI, which again seems to be because of the higher surface functional group density in the former. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3257–3267, 2005