Aggregation and disaggregation of Aeromonas gum in an aqueous solution under different conditions

The aggregation and disaggregation of Aeromonas (A) gum, an acidic heteropolysaccharide, were investigated by viscometry, a fluorescent probe, and gel permeation chromatography combined with laser light scattering techniques in aqueous solutions containing desired NaCl at different temperatures. The A gum had a strong tendency of aggregation and high viscosity in the aqueous solutions. The weight‐average molecular weight, z‐average radius of gyration, weight‐average molar number (w_ag), and apparent aggregation number (N_ap) of the aggregates were investigated and discussed. The results indicated that there were three regions that corresponded to three kinds of aggregates and two transition temperatures at about 35 and 75 °C in the disaggregation course. When the temperature was higher than 75 °C, the w_ag hardly changed, and there was still a certain amount of aggregates even at 100 °C, indicating that the aggregates were difficult to disrupt completely. Moreover, the aggregation was thermally irreversible. Decreasing polysaccharide concentration reduced the content of the aggregate. However, N_ap remained constant around 20, independent of the polysaccharide concentration in a 0.5 M NaCl aqueous solution at 25 °C. At a salt concentration greater than or equal to 0.05 M, the aggregation was almost independent of the salt concentration used here. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 2644–2651, 2000     

Synthesis of poly(L‐lactide)‐grafted pullulan through coupling reaction between amino group end‐capped poly(L‐lactide) and carboxymethyl pullulan and its aggregation behavior in water

Poly(L ‐lactide) (PLLA) with terminal primary amino groups (PLLA‐NH₂) was synthesized and used to construct PLLA‐grafted pullulan (Pul‐g‐PLLA). It consisted of a hydrophilic carboxymethyl Pul (CM‐Pul) main chain and hydrophobic PLLA graft chains that were created through a direct coupling reaction between PLLA‐NH₂ and CM‐Pul using 2‐ethoxy‐1‐(ethoxycarbonyl)‐1,2‐dihydroquinoline as a condensation reagent. Pul‐g‐PLLAs with over 78 wt % sugar unit content were found to form nanometer‐sized aggregates in water. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 5482–5487, 2004     

Effects of the thermal history and concentration on the aggregation of Erwinia gum in an aqueous solution

The aggregation of Erwinia (E) gum in a 0.2 M NaCl aqueous solution was investigated by multi‐angle laser light scattering and gel permeation chromatography (GPC) combined with light scattering. The GPC chromatograms of five fractions contained two peaks; the fractions had the same elution volume but different peak areas, suggesting that aggregates and single chains coexisted in the solution at 25 °C. The apparent weight‐average molecular weights (M_w) of the aggregates and single chains for each fraction were all about 2.1 × 10⁶ and 7.8 × 10⁴, respectively. This indicates that the aggregates were composed of about 27 molecules of E gum in the concentration range used (1.0 × 10⁻⁶ to 5.0 × 10⁻⁴ g/mL). The weight fraction of the aggregates (w_ag) increased with increasing concentration, but the aggregates still existed even in an extremely dilute solution. The fractionation process and polymer concentration hardly affected the apparent aggregation number but significantly changed w_ag. The E‐gum M_w decreased sharply with an increase in temperature. When the E‐gum solution was kept at 100 °C, w_ag decreased sharply for 20 h and leveled off after 100 h. Once the aggregates were decomposed at a higher temperature, no aggregation was observed in the solution at 25 °C, indicating that the aggregation was irreversible. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1352–1358, 2000     

Formation and structure of pachyman aggregates in dimethyl sulfoxide containing water

The aggregation of pachyman, β-(1 → 3)-D -glucan (M_w = 1.68 × 10⁵) from the Poria cocos mycelia, was investigated using static and dynamic laser light scattering (LLS) in dimethyl sulfoxide (DMSO) containing about 15% water, which leads to large aggregates. Both the time dependence of hydrodynamic radius and the angle dependence of the scattering intensity were used to calculate the fractal dimension (d_f) of the aggregates. The aggregation rate and average size of aggregates increase dramatically with increasing the polymer concentration from 1.7 × 10⁻⁴ g/mL to 8.6 × 10⁻⁴ g/mL, and with the decrease of the solvent quality, that is, water content from 13 to 15%. In the cases, the fractal dimensions change from 1.94 to 2.43 and from 1.92 to 2.54, respectively, suggesting that transforms of aggregation processes: a slow process called reaction-limited cluster aggregation (RLCA) to a fast process called diffusion-limited cluster aggregation (DLCA) in different polymer concentrations and water content. The fractal dimensions above 2 of the fast aggregation is larger than the 1.75 predicted for the ideal DLCA model, suggesting that the aggregation involves a restructuring process through the interchain hydrogen bonding interaction. There are no aggregates of pachyman in DMSO without water, but aggregates formed in the DMSO containing 15% water at 25°C as a compact structure. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 3201–3207, 1999     

Molecular weight and aggregation of Aeromonas gum treated with dimethyl sulfoxide in aqueous solution

Aeromonas (A) gum, an acidic hetero polysaccharide, in 0.2 M LiCl/dimethyl sulfoxide (DMSO) was fractionated satisfactorily according to the nonsolvent addition method. Eight fractions were chosen to examine their aggregation behavior in aqueous solution. The weight‐average molecular weight (M_w), radius of gyration 〈S²〉^1/2, and intrinsic viscosities [η] of the fractions in 0.2 M LiCl/DMSO and 0.5 M NaCl aqueous solution at 25 °C were measured by static light scattering and viscometry. The results indicated that the A gum was aggregated in 0.5 M NaCl aqueous solution at 25 °C, and the aggregates were broken in 0.2 M LiCl/DMSO. The apparent weight‐average aggregation number (N_ap) of the fractions increased with the process of fractionation, that is, N_ap increased from 1.1 to 15 with decreasing M_w of the single chain. The fractions obtained by treating with DMSO were more easily dissociated in the aqueous solution, and its N_ap was lower than that of the A gum fractions that were not treated with DMSO. Moreover, the A gum molecules with relatively low M_w aggregated easily to form a compact spherelike structure in the aqueous solution. Elemental analysis and ¹³C NMR spectroscopy indicated that DMSO was adsorbed on the A gum molecules caused by the fractionation program; DMSO not only prevented the polysaccharide aggregation but also increased the solubility. A model has been proposed to describe the aggregation behavior of the A gum chains with DMSO overcoat in the aqueous solution. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 2269–2276, 2002     

Novel cellulose derivatives. V. Synthesis and thermal properties of esters with trifluoroethoxy acetic acid

Esters of cellulose with trifluoroethoxy acetic acid (TFAA) were prepared in homogeneous phase using a mixed anhydride with p‐toluenesulfonic acid. Esters with low degree of substitution (DS), and with DS rising from 0 to 3, had hydrophobic character that prevented the usual association with moisture, which is otherwise typical of cellulose esters with low DS. Cellulose trifluoroethoxy acetate (CT) had T_g's declining by about 40 °C per DS‐unit (from 160 to 41 °C) as DS rose from 1 to 3. Mixed esters, cellulose derivatives with acetate and trifluoroethoxy acetate substituents (CAT), exhibited glass‐to‐rubber and melting transitions by DSC. A linear relationship between both T_g and T_m with respect to DS was recorded with the T_g and T_m separated by 30° to 40 °C. This is consistent with cellulose esters described elsewhere. Surprisingly, the T_g's of CT and CAT were found to be identical when the DS was equivalent to the DS of the fluoro substituents (DS_F). © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 486–494, 2000     

Synthesis,characterization, and micellization of PCL‐g‐PEG copolymers by combination of ROP and “Click” chemistry via “Graft onto” method

Biodegradable and biocompatible PCL‐g‐PEG amphiphilic graft copolymers were prepared by combination of ROP and “click” chemistry via “graft onto” method under mild conditions. First, chloro‐functionalized poly(ε‐caprolactone) (PCL‐Cl) was synthesized by the ring‐opening copolymerization of ε‐caprolactone (CL) and α‐chloro‐ε‐caprolactone (CCL) employing scandium triflate as high‐efficient catalyst with near 100% monomer conversion. Second, the chloro groups of PCL‐Cl were quantitatively converted into azide form by NaN₃. Finally, copper(I)‐catalyzed cycloaddition reaction was carried out between azide‐functionalized PCL (PCL‐N₃) and alkyne‐terminated poly(ethylene glycol) (A‐PEG) to give PCL‐g‐PEG amphiphilic graft copolymers. The composition and the graft architecture of the copolymers were characterized by ¹H NMR, FTIR, and GPC analyses. These amphiphilic graft copolymers could self‐assemble into sphere‐like aggregates in aqueous solution with diverse diameters, which decreased with the increasing of grafting density. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012     

Glass transition and its characteristic length for thin crosslinked polystyrene shells of rodlike capsules

Rodlike capsules consisting of a calcium carbonate core and a crosslinked polystyrene shell were synthesized, and the glass transition temperature (T_g) and characteristic length of the glass transition ξ(T_g) for the thin outer shells were investigated by temperature‐modulated differential scanning calorimetry. The shell thickness ranged from 20 to 129 nm. The ratio of the T_g for the outer shell to the bulk T_g increases with decreasing shell thickness d. The d‐dependence of T_g is interpreted in terms of a simple two‐layer model which assumes that an immobile layer exists near the core‐shell interface. Shells of hollow capsules unexpectedly exhibit a similar d‐dependence of T_g to that for the filled capsules. This is characteristic of the crosslinked polymeric shells, and is attributed to certain spatial heterogeneity of crosslink distribution, and/or to the unstable configuration in the ultrathin shell that does not undergo relaxation due to the crosslink. The latter idea is based on the assumption that unstable configurational state is responsible for the T_g shift from the bulk value observed for nanosized polymeric materials. The ratio of the characteristic length for the shell of the filled capsule to that of the bulk ξ_f(T_g)/ξ_b(T_g) decreases with decreasing d. The results are interpreted in terms of the configurational entropy, and it is also suggested that the configurational state of network polymer chains in the shell affects the characteristic length. © 2008 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 46: 2116–2125, 2008     

Synthesis and self‐assembly of poly(styrene)‐b‐poly(N‐vinylpyrrolidone) amphiphilic diblock copolymers made via a combined ATRP and MADIX approach

Amphiphilic diblock copolymers of polystyrene (PS) and poly(N‐vinylpyrrolidone) (PNVP) were prepared by a combination of ATRP and MADIX. Well‐defined PS with bromine end group was synthesized by ATRP in bulk at 110 °C using (1‐bromoethyl) benzene as an initiator. The Br‐ end group was then converted to xanthate as verified by ¹H NMR spectroscopy, elemental analysis, and UV‐spectroscopy. PS‐b‐PNVP copolymers were produced by MADIX of NVP in bulk at 60 °C using PS‐xanthate as a macro‐chain transfer agent and the kinetics of polymerization were investigated. The structures of PS‐b‐PNVP were characterized using GPC and ¹H NMR. Amphiphilic PS‐b‐PNVP could form spherical micelles with PS cores and PNVP shells in aqueous solution as confirmed by ¹H NMR and laser light scattering (LLS). The values of critical micelle concentration of PS‐b‐PNVP and the average aggregation number of PS‐b‐PNVP in the micelles were measured using pyrene as a probe and static LLS, respectively. The aggregation number increases concomitantly with temperature (10–50 °C), but the hydrodynamic radius of the micelles remains almost constant over the same temperature range, which may indicate shell dehydration at a higher temperature. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 5604–5615, 2008     

Thermosensitive water‐soluble poly(ethylene glycol)‐based polythiophene graft copolymers

Diethyleneglycol methylethermethacrylate(MeO₂MA) and oligoethylene glycol methylethermethacrylate(OEGMA) are polymerized on polythiophene(PT) backbone to produce water‐soluble PT‐g‐PMeO₂MA(PTD) and PT‐g‐P(MeO₂MA‐co‐OEGMA)(PTDO) using atom transfer radical polymerization. They are characterized by ¹H NMR and GPC techniques. TEM micrographs indicate that PT‐chains self‐organize as nanospheres, and atomic force micrographs suggest that aggregated PT‐chains are present at the centre surrounded by dispersed PMeO₂MA fibers producing miceller‐type aggregates. Dynamic light scattering study indicates an initial decrease followed by sharp increase of Z‐average particle size of PTD with temperature for attaining lower critical solution temperature (LCST) at 20 °C. The LCST increases with OEGMA concentration in PTDO. The temperature dependent PL emission of PTD shows a minimum at 19 °C, followed by a sharp increase till 21 °C, and in the cooling cycle, it shows a complete reversibility. In the PTDO copolymers, the PL intensity shows the hike at progressively higher temperatures due to the increase of LCST with increasing OEGMA concentration. © 2012 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2013     

Circular dichroism induced by the helical conformations of acylated chitosan derivatives bearing cinnamate chromophores

Through regioselective modifications, some acylated chitosan derivatives, O‐cinnamoyl chitosans with degree of substitution (DS) varying from 0.8 to 2.0 and N‐fatty acyl‐O‐dicinnamoyl chitosans with different fatty acyl chain lengths (C₂–C₁₂), were prepared, and their chiroptical properties in dilute solutions were investigated by circular dichroism (CD). Exciton coupling between two vicinal cinnamoyl chromophores appended to the helical mainchains gave rise to bisignate Cotton effects (CEs), which were used to deduce the absolute sense of the twisting structures in solution phase. It was found that the absolute helicities vary with DS, length of the fatty chain, and solvent property, but are nearly independent of thermal stimulus. The molecular interactions (hydrogen bonding and hydrophobic interaction) involved possibly in the self‐assembled ordered structures were discussed. © 2005 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 1354–1364, 2005     

Morphological transitions in aggregates of thermosensitive poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) block copolymers prepared via RAFT polymerization

Double hydrophilic poly(ethylene oxide)‐b‐poly(N‐isopropylacrylamide) (PEO‐b‐PNIPAM) block copolymers were synthesized via reversible addition‐fragmentation chain transfer (RAFT) polymerization, using a PEO‐based chain transfer agent (PEO‐CTA). The molecular structures of the copolymers were designed to be asymmetric with a short PEO block and long PNIPAM blocks. Temperature‐induced aggregation behavior of the block copolymers in dilute aqueous solutions was systematically investigated by a combination of static and dynamic light scattering. The effects of copolymer composition, concentration (C_p), and heating rate on the size, aggregation number, and morphology of the aggregates formed at temperatures above the LCST were studied. In slow heating processes, the aggregates formed by the copolymer having the longest PNIPAM block, were found to have the same morphology (spherical “crew‐cut” micelles) within the full range of C_p. Nevertheless, for the copolymer having the shortest PNIPAM block, the morphology of the aggregates showed a great dependence on C_p. Elongation of the aggregates from spherical to ellipsoidal or even cylindrical was observed. Moreover, vesicles were observed at the highest C_p investigated. Fast heating leads to different characteristics of the aggregates, including lower sizes and aggregation numbers, higher densities, and different morphologies. Thermodynamic and kinetic mechanisms were proposed to interpret these observations, including the competition between PNIPAM intrachain collapse and interchain aggregation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 4099–4110, 2009     

Preparation and characterization of cyclic polystyrene with short poly(2‐tert‐butylbutadiene) sequences

A polystyrene‐block‐oligo(2‐tert‐butylbutadiene)‐block‐polystyrene triblock copolymer was prepared and cyclized by end‐to‐end ring closure. Ring‐shaped polystyrene‐block‐oligo(2‐tert‐butylbutadiene) was isolated from the coupling product via gel permeation chromatography (GPC) fractionation. The ring polymer was ozonized for decomposition of the oligo(2‐tert‐butylbutadiene) sequences selectively referring to the linear molecule. From GPC analysis of the decomposed products by ozonolysis, it was quantitatively confirmed that the fractionated product was 86% ring molecules. Single chain dimensions of the ring and linear molecules in a good solvent, benzene, and in a θ solvent, cyclohexane, were measured with small‐angle neutron scattering. The ratios of the radii of gyration, R_g(ring)/R_g(linear), were 0.780 in benzene and 0.789 in cyclohexane. These were compared with theoretically predicted values. © 2002 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 40: 1582–1589, 2002     

Effects of stereocomplexation on the physicochemical behavior of PLA/PEG block copolymers in aqueous solution

A series of polylactide/poly(ethylene glycol) (PLA/PEG) block copolymers were synthesized by ring‐opening polymerization of L ‐ or D ‐lactide in the presence of mono‐ or di‐hydroxyl PEG. The effects of stereocomplexation on the physicochemical behavior of PLA/PEG copolymers in aqueous solution were investigated by varying the degree of stereocomplexation or PLLA/PEG to PDLA/PEG ratio. In mixture solutions of insoluble and soluble copolymers, stereocomplexation strongly affects the solubility of the copolymers. In mixture solutions of soluble copolymers, both the size and aggregation number (N_agg) of the aggregates vary as a function of the degree of stereocomplexation. It is suggested that the size variation of the aggregates with increasing the degree of stereocomplexation is dependent on N_agg changes which are determined by two effects: the self‐adjusting of the aggregates so as to minimize the free energy and thus to increase the N_agg, and the kinetics of aggregation which tend to form more aggregates and thus to decrease the N_agg. Combination of the two opposite effects well explains the diverse variations of N_agg and size of the aggregates as a function of the degree of stereocomplexation. © 2012 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys, 2012     

Improving polyethylene–octene elastomer/chitosan by graftation of acrylic acid onto polyethylene–octene elastomer—mechanical properties and biodegradability examination and composites characterization

In this study, the properties of polyethylene–octene elastomer/chitosan (POE/chitosan) and acrylic acid (AA)‐grafted‐polyethylene–octene elastomer/chitosan (POE‐g‐AA/chitosan) were examined using various characterizing instruments. Mechanical and thermal properties of POE deteriorated noticeably when it was blended with chitosan, due to the unsatisfactory compatibility between the two phases. The greater compatibility of POE‐g‐AA with chitosan, due to the formation of ester carbonyl and imide groups, led to a much better dispersion and homogeneity of chitosan in the POE‐g‐AA matrix and consequently to noticeably better mechanical properties. Furthermore, with a lower melting point temperature, the POE‐g‐AA/chitosan blend was more easily processed than POE/chitosan. POE‐g‐AA/chitosan had a higher water resistance than POE/chitosan. Both blends suffered weight loss when buried in soil, especially at high levels of chitosan substitution, indicating that both were biodegradable. The mechanical properties of both blends, such as tensile strength and elongation at break, also deteriorated after being buried in soil. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 3882–3891, 2003     

Block‐brush copolymers via ROMP and sequential double click reaction strategy

We report an efficient way, sequential double click reactions, for the preparation of brush copolymers with AB block‐brush architectures containing polyoxanorbornene (poly (ONB)) backbone and poly(ε‐caprolactone) (PCL), poly(methyl methacrylate) (PMMA) or poly(tert‐butyl acrylate) (PtBA) side chains: poly(ONB‐g‐PMMA)‐b‐poly(ONB‐g‐PCL) and poly(ONB‐g‐PtBA)‐b‐poly(ONB‐g‐PCL). The living ROMP of ONB affords the synthesis of well‐defined poly(ONB‐anthracene)₂₀‐b‐poly (ONB‐azide)₅ block copolymer with anthryl and azide pendant groups. Subsequently, well‐defined linear alkyne end‐functionalized PCL (PCL‐alkyne), maleimide end‐functionalized PMMA (PMMA‐MI) and PtBA‐MI were introduced onto the block copolymer via sequential azide‐alkyne and Diels‐Alder click reactions, thus yielding block‐brush copolymers. The molecular weight of block‐brush copolymers was measured via triple detection GPC (TD‐GPC) introducing the experimentally calculated dn/dc values to the software. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Synthesis of poly(ethylene‐co‐vinyl alcohol)‐g‐polystyrene graft copolymer and their applications for ordered porous film and compatibilizer

A series of new functional poly(ethylene‐co‐vinyl alcohol)‐g‐polystyrene graft copolymers (EVAL‐g‐PS) with controlled molecular weight (M_n = 38,000–94,000 g mol^?1) and molecular weight distribution (M_w/M_n = 2.31–3.49) were synthesized via a grafting from methodology. The molecular structure and component of EVAL‐g‐PS graft copolymers were confirmed by the analysis of their ¹H NMR spectra and GPC curves. The porous films of such copolymers were fabricated via a static breath‐figure (BF) process. The influencing factors on the morphology of such porous films, such as solvent, temperature, polymer concentration, and molecular weight of polymer were investigated. Ordered porous film and better regularity was fabricated through a static BF process using EVAL‐g‐PS solution in CHCl₃. Scanning electron microscopy observation reveals that the EVAL‐g‐PS graft copolymer is an efficient compatibilizer for the blend system of low‐density polyethylene/polystyrene. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2016 , 54, 516–524     

Viscoelastic properties of an organic hybrid of chlorinated polyethylene and a small molecule

The dynamic mechanical properties of an organic hybrid consisting of chlorinated polyethylene (CPE) and N,N‐dicyclohexyl‐2‐benzothiazolyl sulfenamide (DZ) were investigated. All the CPE/DZ hybrids showed a single loss tangent (tan δ) peak in the mechanical spectra. The peak area under the tan δ/temperature curves around the mechanical loss peak was examined to characterize the damping properties of the CPE/DZ hybrids. We found that there exists a bending point in the relation between the glass‐transition temperature (T_g) and DZ content and that the value of T_g is saturated in the higher DZ contents, suggesting that excess DZ molecules show self‐aggregation and are reorganized. © 2000 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 38: 1341–1347, 2000     

Visualization of spontaneous aggregates by diblock poly(styrene)‐b‐poly(L‐lactide)/poly(D‐lactide) pairs in solution with new fluorescent CdSe quantum dot labels

Spontaneous stereocomplex aggregation of diblock poly(styrene)‐b‐poly(L ‐lactide) PS‐b‐PLLA/poly(D ‐lactide) PDLA pairs has been investigated under ambient temperature in tetrahydrofuran solution. First, diblock PS₂₆₀‐b‐PLLA₁₆₅ and PS₂₆₀‐b‐PDLA₁₆₂ bearing similar lengths of respective PLLA and PDLA blocks were synthesized through controlled atom‐transfer radical polymerization of styrene, and a subsequent living ring‐opening polymerization of optically pure lactides, and their structures were further characterized by nuclear magnetic resonance spectroscopy (NMR) and gel‐permeation chromatography (GPC). Subsequently, new enantiomeric poly(D ‐lactide) stabilized core‐shell fluorescent CdSe quantum dots (CdSe/PDLA QD) were designed and prepared as sensitive fluorescence labels to shed new lights on the spontaneous stereocomplex aggregation in THF, which was mediated by stereocomplexation of the PLLA and PDLA chains. Upon simply mixing two individual THF solution of diblock PS₂₆₀‐b‐PLLA₁₆₅ and HO‐PDLA₃₀‐SH, spontaneous stereocomplex aggregation was studied, and the aggregated uniform spherical particles were observed by scanning electronic microscopy (SEM) to exhibit average particle diameters of 2.0 μm. Finally, utilizing the prepared CdSe/PDLA QDs as new fluorescent labels, morphologies of the spontaneous aggregates by new diblock PS₂₆₀‐b‐PLLA₁₆₅/HO‐PDLA₃₀‐SH pair were for the first time directly visualized by a confocal laser scanning fluorescence microscopy (CLSFM). These results might suggest alternative ways to simply prepare functional fluorescent particles with tunable diameter sizes and would be helpful to understand the mechanism of stereocomplex particle aggregation. © 2009 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 47: 1393–1405, 2009     

Synthesis and characterization of polytulipalin‐g‐polylactide copolymers

Graft copolymers of poly(tulipalin A) (PT) and poly(DL‐lactide) (PDLLA) (PT‐g‐PDLLA) having various graft lengths and ratios were synthesized by free‐radical copolymerization of α‐methylene‐γ‐butyrolactone (MBL) and PDLLA macromonomers (HEMA‐PDLLA) terminated by 2‐hydroxyethyl methacrylate (HEMA)‐terminated. HEMA‐PDLLA were synthesized by ring opening polymerization (ROP) of DL‐lactide in the presence of HEMA. Both HEMA‐PDLLA and the copolymers were characterized by NMR spectroscopy and gel permeation chromatography (GPC). The thermal properties of the graft copolymers were found to depend on the graft length and the ratio. The copolymers consisting of PDLLA side chains of M_n = 500 Da showed a single T_g between T_gs of the two component polymers, suggesting a miscible state of PT and PDLLA. In contrast, the copolymers consisting of PDLLA side chains of M_n = 1100, 2000, and 7000 Da showed two isolated T_g, suggesting two segregated domains. The AFM phase images of the copolymers supported the single and phase‐separated morphologies for the former and latter systems, respectively. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2012