Evaluation of online carbon isotope dilution mass spectrometry for the purity assessment of synthetic peptide standards

We present a novel method for the purity assessment of peptide standards which is applicable to any water soluble peptide. The method is based on the online ¹³C isotope dilution approach in which the peptide is separated from its related impurities by liquid chromatography (LC) and the eluent is mixed post-column with a continuous flow of ¹³C-enriched sodium bicarbonate. An online oxidation step using sodium persulfate in acidic media at 99 °C provides quantitative oxidation to ¹²CO₂ and ¹³CO₂ respectively which is extracted to a gaseous phase with the help of a gas permeable membrane. The measurement of the isotope ratio 44/45 in the mass spectrometer allows the construction of the mass flow chromatogram. As the only species that is finally measured in the mass spectrometer is CO₂, the peptide content in the standard can be quantified, on the base of its carbon content, using a generic primary standard such as potassium hydrogen phthalate. The approach was validated by the analysis of a reference material (NIST 8327), and applied to the quantification of two commercial synthetic peptide standards. In that case, the results obtained were compared with those obtained using alternative methods, such as amino acid analysis and ICP-MS. The results obtained proved the value of the method for the fast, accurate and precise mass purity assignment of synthetic peptide standards.     

Paradigms in isotope dilution mass spectrometry for elemental speciation analysis

Isotope dilution mass spectrometry currently stands out as the method providing results with unchallenged precision and accuracy in elemental speciation. However, recent history of isotope dilution mass spectrometry has shown that the extent to which this primary ratio measurement method can deliver accurate results is still subject of active research. In this review, we will summarize the fundamental prerequisites behind isotope dilution mass spectrometry and discuss their practical limits of validity and effects on the accuracy of the obtained results. This review is not to be viewed as a critique of isotope dilution; rather its purpose is to highlight the lesser studied aspects that will ensure and elevate current supremacy of the results obtained from this method.     

Determination of cyanuric acid using exact matching isotope dilution mass spectrometry

A high‐accuracy double isotope dilution mass spectrometric method using an exact matching approach with GC coupled to a mass spectrometer for the analysis of cyanuric acid in fortified milk powder was developed. Various parameters for sample clean‐up such as the type of SPE cartridge, GC column and type of derivatizing agent used were investigated. The method was found to be linear in the concentration range of 0.03 to 2 mg/kg of cyanuric acid in milk powder. LOD and LOQ were found to be 0.9 and 3 μg/kg, respectively. Recoveries in the range of 95.7 to 102.2% were obtained for the in‐house fortified milk powder samples, with RSD of measurements in the range of 0.2 to 3.0%. A metrological approach was undertaken to examine all possible biases that contributed to the combined measurement uncertainty of the method. This high‐accuracy method can serve as a reference method for techniques commonly applied in routine testing laboratories.     

Quantification of ochratoxin A in foods by a stable isotope dilution assay using high-performance liquid chromatography-tandem mass spectrometry

A stable isotope dilution assay (SIDA) was developed for quantification of the mycotoxin ochratoxin A (OTA) by using [2H5]-OTA as internal standard. The synthesis of labelled OTA was accomplished by acid hydrolysis of unlabelled OTA and subsequent coupling one of the products, ochratoxin alpha, to [2H5]-L-phenylalanine. The mycotoxin was quantified in foods by LC-tandem MS after extraction with buffers containing [2H5]-OTA and clean-up by immuno affinity chromatography or by solid phase extraction on silica. The method showed a sufficient sensitivity with a low detection and quantification limit of 0.5 and 1.4 microg/kg, respectively, and good precision in inter-assay studies showing a CV (n = 3) of 3.6%. The analysis of certified reference materials resulted in a low bias of 2.1% from the certified values and revealed excellent accuracy of the new method. To prove the suitability of SIDA. OTA was quantified in a number of food samples and resulted mainly in not detectable OTA contents. However, three samples of raisins exceeded the legal limit of 10 microg/kg and highlighted the need for further controlling the contamination with the mycotoxin.     

Determination of B in body fluids by isotope dilution inductively coupled mass spectrometry with direct injection nebulization

The determination of B in small volumes of undigested blood plasma and urine by isotope dilution and high efficiency direct injection nebulization (DIN) inductively coupled plasma mass spectrometry (ICP-MS) is proposed. The C interference over ¹¹B was removed by precipitating the samples proteins. Samples aliquots of 1 ml were spiked with an enriched ¹⁰B solution and shaken during 1 h to attain the isotopic equilibrium. Thereafter, the sample proteins were denaturated with nitric acid and the supernatant was analyzed. This procedure was effective to reduce C concentrations in approximately 94%. Sample volumes of 50 μl were introduced into the ICP by the direct injection nebulizer producing transient signals lasting 30 s for B isotopes measurements. Precision of ¹⁰B/¹¹B measurements was characterized by relative standard deviation (RSD) lower than 1%. The instrumental mass discrimination factor was lower than 5%. Total B concentrations from 100 to 135 μg L⁻¹ in plasma and 0.499 to 3.021 mg L⁻¹ in urine samples were found. Reproducibility of triplicate samples was characterized by RSD<2.0% for plasma and lower than 1.3% for urine samples. Limit of detection (3σ) of 0.6 ng ml⁻¹ was calculated from synthetic blood plasma blank. Results of the denatured supernatant and digested plasma and urine samples were comparable at the 95% confidence level.     

The optimal amount of isotopic spike solution for ultratrace analysis by isotope dilution mass spectrometry

 Inductively coupled plasma mass spectrometry (ICP-MS) and high resolution inductively coupled plasma mass spectrometry (HR-ICP-MS) are powerful methods of determining metallic impurities in the low- and sub-ppt level in process media such as ultra-pure water used in semiconductor and wafer manufacturing. By using mass spectrometers for analysis, an isotope dilution analysis (IDMS) is possible. The reproducibility of an IDMS is unmatched. For concentration levels near the instrument detection limit a novel method is reported to find the optimal amount of isotopic spike solution. This optimal value can be derived by the law of propagation of uncertainty combined with the Poisson statistics of the measured number of counts. Generally, an excess of isotopic spike solution should be used to provide results of lowest possible uncertainty. The results are presented in a diagram for easy practical use. Received: 14 October 1997 · Accepted: 13 February 1998     

New mathematical models with associated equations for isotope dilution mass spectrometry (IDMS)

Vector models which progressively lead to a general model for isotope dilution mass spectrometry (IDMS) are presented for the case of two 'monitor isotopes' and one blend involved. They enable one to find the boundary conditions for performing IDMS, and cover the cases of highly enriched isotopes, radioactive isotopes and ratios that are given with different denominator. The models identify the key measurements in their simplest form as well as the conditions which minimise the measurement effort and in some cases the propagated measurement uncertainties. The equations are discussed and compared with other published IDMS equations. Combined with discussion on fundamental aspects of IDMS, this results in an even more 'general' but also more complex IDMS equation.     

Determination of melamine in milk powder using gas chromatography-high-resolution isotope dilution mass spectrometry

A GC-high-resolution isotope dilution MS (IDMS) method for the quantification of melamine in milk powder is described. The developed technique is compared to the LC-IDMS/MS technique, typically used for the determination of melamine in various matrices. The accuracy of the GC-high-resolution IDMS method was demonstrated when a small degree of equivalence was obtained in a regional comparative study involving the determination of melamine in milk powder.     

Development of melamine certified reference material in milk using two different isotope dilution mass spectrometry techniques

A new certified reference material (CRM) of melamine in milk GLHK-11-02 was developed aiming to address the great demand from the testing community after the melamine crises. The material was prepared by adding an appropriate quantity of melamine into the skimmed milk samples and the final product was in the form of fine lyophilized powder. Characterization of the material relied on two newly developed gravimetric isotope dilution mass spectrometry (IDMS) methods, one using liquid chromatography-tandem mass spectrometry (LC-MS/MS) and another gas chromatography-mass spectrometry (GC-MS). Experimental parameters with crucial effects on the performance of the two IDMS methods were thoroughly investigated. These included purity of standard used, equilibration time of isotopes, efficiency of extraction methods as well as possible interferences from the matrix and melamine analogues. Precision was found to be excellent with a coefficient of variation of 2.5% for the LC-IDMS/MS (n=46) and 1.9% for the GC-IDMS (n=30) respectively. Using one-tail Student's t-test at 95% confidence interval, analytical data sets generated from the two methods were found to exhibit no significant difference. Measurement accuracy of the methods was further verified through an Asia Pacific Metrology Program (APMP) pilot study. Analytical results of the present LC-IDMS/MS for the two milk test samples at the concentration level of about 0.45 and 3.5 mg kg(-1) were proven to be very good. There were excellent overlaps between our results and the assigned reference values, and the absolute deviation was less than 3.2%. Both the LC-IDMS/MS and GC-IDMS methods were shown to be sufficiently reliable and accurate for certification of the melamine CRM. Certified value of melamine in dry mass fraction in GLHK-11-02 was 1.14 mg kg(-1). Expanded uncertainty due to sample inhomogeneity, long term and short term stability and variability in the characterization procedure was at 7.1% or 0.08 mg kg(-1). The CRM is primarily used to provide a complete method validation for and to improve the technical competence of melamine analysis to food and chemical testing laboratories.     

Characterizing uranium oxide reference particles for isotopic abundances and uranium mass by single particle isotope dilution mass spectrometry

Uranium and plutonium particulate test materials are becoming increasingly important as the reliability of measurement results has to be demonstrated to regulatory bodies responsible for maintaining effective nuclear safeguards. In order to address this issue, the Institute for Reference Materials and Measurements (IRMM) in collaboration with the Institute for Transuranium Elements (ITU) has initiated a study to investigate the feasibility of preparing and characterizing a uranium particle reference material for nuclear safeguards, which is finally certified for isotopic abundances and for the uranium mass per particle. Such control particles are specifically required to evaluate responses of instruments based on mass spectrometric detection (e.g. SIMS, TIMS, LA-ICPMS) and to help ensuring the reliability and comparability of measurement results worldwide. In this paper, a methodology is described which allows quantifying the uranium mass in single micron particles by isotope dilution thermal ionization mass spectrometry (ID-TIMS). This methodology is characterized by substantial improvements recently achieved at IRMM in terms of sensitivity and measurement accuracy in the field of uranium particle analysis by TIMS. The use of monodisperse uranium oxide particles prepared using an aerosol generation technique developed at ITU, which is capable of producing particles of well-characterized size and isotopic composition was exploited. The evidence of a straightforward correlation between the particle volume and the mass of uranium was demonstrated in this study. Experimental results have shown that the uranium mass per particle can be measured via the ID-TIMS method to a relative expanded uncertainty of about 10% (coverage factor k = 2). The availability of reliable and validated methods for the characterization of uranium particles is considered to be essential for the establishment of SI-traceable measurement results. It is therefore expected that the method developed in this study is valuable for the certification of particulate materials in which the isotopic composition and the content of uranium must be accurately known.     

Application of isotope dilution mass spectrometry to research of certified reference materials

This paper briefly describes the method and applications of isotope dilution mass spectrometry(IDMS). Primary standard solutions with various natural isotope abundances were used to certify the concentration of enriched isotope solutions by IDMS. Then these enriched isotopes were used to certify unknown samples by IDMS. Li, K, Mg, Fe, Cu, Ni, Cd, Mo, Pb, etc in CRMs were certified and very good results were obtained in three international comparisons by IDMS. Received: 15 June 2000 Accepted: 26 October 2001     

Determination of uranium in marine sediment pore waters by isotope dilution inductively coupled plasma mass spectrometry

Inductively coupled plasma mass spectrometry (ICP-MS) was used in an isotope dilution mode to assay small-volume (0.25 ml) sediment pore waters for their uranium contents, using ²³⁶U as the spike. The only pretreatment required was a simple dilution by a factor of 20, which gave sufficient volume for three replicate analyses per sample. Rapid and accurate results were obtained for a variety of samples and standards, ranging in concentration from 0.05 to 10 ng U ml^?1. A suite of 30 samples can be analysed in less than 6 h by this method. The relative standard deviation was better than 1.9%, with a detection limit, based on 3σ background, of 2 pg U ml^?1 in solution (40 pg ml^?1 in samples). Sea water is a difficult matrix for ICP-MS and thus the method is generally suitable for uranium determinations in many other sample solutions.     

气相色谱-三重四极杆质谱同位素内标法测定鱼样中20种多氯联苯

建立了一种气相色谱-三重四极杆质谱结合双稳定性同位素内标检测鱼样中多氯联苯的方法。采用自动索氏提取器提取样品中的多氯联苯,经一根复合净化柱净化后,采用质谱多反应监测模式检测,选取两个独立的离子对。分析了20种多氯联苯,包含7种指示性多氯联苯,从三氯联苯到八氯联苯每族3个化合物,九氯联苯和十氯联苯各一个,每族使用一个相同氯代程度的¹³C₁₂标记多氯联苯作为定量内标、2种回收内标。20种多氯联苯在33 min内流出,分离良好,线性范围为0.05~10 μg/L,相关系数r均在0.99以上,低、中、高3种水平的加标回收率均在80.3%~117.6%之间,相对标准偏差（RSD,n=6）在5.09%~18.5%之间,方法检出限为0.01~0.02 μg/kg。20种多氯联苯总量在1.2~8.8 μg/kg（湿重）范围内,7个指示性多氯联苯总量在0.68~6.4 μg/kg（湿重）范围内。该方法缩短了分析时间,减少了有机溶剂的使用量,适合鱼样中多氯联苯的测定。     

Direct quantification of creatinine in human urine by using isotope dilution extractive electrospray ionization tandem mass spectrometry

Urinary creatinine (CRE) is an important biomarker of renal function. Fast and accurate quantification of CRE in human urine is required by clinical research. By using isotope dilution extractive electrospray ionization tandem mass spectrometry (EESI–MS/MS) a high throughput method for direct and accurate quantification of urinary CRE was developed in this study. Under optimized conditions, the method detection limit was lower than 50 μg L⁻¹. Over the concentration range investigated (0.05–10 mg L⁻¹), the calibration curve was obtained with satisfactory linearity (R² = 0.9861), and the relative standard deviation (RSD) values for CRE and isotope-labeled CRE (CRE-d3) were 7.1–11.8% (n = 6) and 4.1–11.3% (n = 6), respectively. The isotope dilution EESI–MS/MS method was validated by analyzing six human urine samples, and the results were comparable with the conventional spectrophotometric method (based on the Jaffe reaction). Recoveries for individual urine samples were 85–111% and less than 0.3 min was taken for each measurement, indicating that the present isotope dilution EESI–MS/MS method is a promising strategy for the fast and accurate quantification of urinary CRE in clinical laboratories.     

Determination of phthalate esters in Chinese spirits using isotope dilution gas chromatography with tandem mass spectrometry

Phthalate esters are additives used in polyvinylchloride and are found as contaminants in many food products. An isotope dilution mass spectrometry technique has been developed for accurate analysis of 16 phthalate esters in Chinese spirits by adopting the 16 corresponding isotope‐labeled phthalate esters. The ethanol in the spirit sample was first removed by heating with a water bath at 100°C with a stream of nitrogen, after which the residue was extracted with n‐hexane twice. The phthalates collected were identified and quantified by gas chromatography with tandem mass spectrometry in multiple reaction monitoring mode. The spiking recoveries of 16 analytes ranged from 94.3 to 105.3% with relative standard deviation values of <6.5%. The detection limits for 16 analytes were <10.0 ng/g. The expanded relative uncertainties were from 3.0 to 14%. A survey was performed on Chinese spirits from the market. Six of the nine analyzed samples were contaminated by phthalates. Di‐n‐butyl phthalate and di‐2‐ethylhexyl phthalate showed higher detection frequency and concentrations. This isotope dilution gas chromatography with tandem mass spectrometry method is simple, rapid, accurate, and highly sensitive, which qualifies as a candidate reference method for the determination of phthalates in spirits.     

Serum/plasma methylmercury determination by isotope dilution gas chromatography-inductively coupled plasma mass spectrometry

A method for the determination of methylmercury in plasma and serum samples was developed. The method uses isotope dilution with ¹⁹⁸Hg-labeled methylmercury, extraction into dichloromethane, back-extraction into water, aqueous-phase ethylation, purge and trap collection, thermal desorption, separation by gas chromatography, and mercury isotope specific detection by inductively coupled plasma mass spectrometry. By spiking 2 mL sample with 1.2 ng tracer, measurements in a concentration interval of (0.007–2.9) μg L⁻¹ could be performed with uncertainty amplification factors <2. A limit of quantification of 0.03 μg L⁻¹ was estimated at 10 times the standard deviation of concentrations measured in preparation blanks. Within- and between-run relative standard deviations were <10% at added concentration levels of 0.14 μg L⁻¹, 0.35 μg L⁻¹ and 2.8 μg L⁻¹, with recoveries in the range 82–110%. Application of the method to 50 plasma/serum samples yielded a median (mean; range) concentration of methylmercury of 0.081 (0.091; <0.03–0.19) μg L⁻¹. This is the first time methylmercury has been directly measured in this kind of specimen, and is therefore the first estimate of a reference range.     

氨基酸-稳定同位素稀释质谱法用于合成肽段准确含量分析

建立了氨基酸同位素稀释液相色谱-串联质谱法准确测定合成肽段绝对含量的方法。实验中对合成肽段的纯度进行了表征,色谱纯度表征结果为99%以上,质谱纯度为90%以上。在肽段溶液中加入13C标记的氨基酸后进行酸溶液水解时间的优化,水解后的氨基酸直接经液相色谱分离和质谱检测,结果表明肽段中的被测氨基酸在150 ℃、6 mol/L HCl溶液水解4～6 h就可以达到水解平衡。每个肽段选择两个或两个以上的被测氨基酸,测得随机选择的5种合成肽段的绝对含量为62.07%～88.18%,测定结果的相对标准偏差小于8%,相对误差小于5%,均满足定量要求。除常用的被测氨基酸苯丙氨酸、缬氨酸、异亮氨酸外,还考察了选择赖氨酸和精氨酸作为被测氨基酸的可行性,实验结果表明增加精氨酸为被测氨基酸是可行的,从而进一步增加了方法的普适性。该方法的建立避免了色谱法定量时氨基酸衍生化处理带来的副反应影响及操作繁琐等问题,提高了肽段含量测定的准确度和精密度,为肽段含量的准确测定提供了一种新的方法。     

Precise determination of dissolved silica in seawater by ion-exclusion chromatography isotope dilution inductively coupled plasma mass spectrometry

Ion exclusion chromatograph (IEC) isotope dilution (ID) inductively coupled plasma mass spectrometry (ICP–MS) (IEC–ID–ICP–MS) was developed for measurement of dissolved silica in seawater, which was applied to production of certified reference materials (CRMs) of three concentration levels of nutrients (high, medium and low levels). IEC–ICP–MS has been employed to separate dissolved silica from seawater matrix. In the present study, in order to solve substantial problems due to spectral interference in ICP–MS and to improve the accuracy of IEC–ICP–MS beyond standard addition or conventional calibration methods, ID method was coupled with ICP-sector field mass spectrometry (operated under medium resolution,i.e., m/Δm = 4000). In addition, effects of various operating parameters in ICP–MS on a silicon background level were also investigated to obtain lower background equivalent concentration (BEC). As a result, 3 ng g⁻¹ of the BEC and 0.5 % of relative standard uncertainties were achieved in the analyses of dissolved silica in seawater samples at concentration levels from 4.0 mg kg ^-1 to 0.8 mg kg⁻¹ as silicon. The developed method was successfully validated by analyses of an artificial seawater containing a known amount of silicate and the seawater certified reference material MOOS-2 produced by the National Research Council Canada.     

Rapid simultaneous determination of dexamethasone and betamethasone in milk by liquid chromatography tandem mass spectrometry with isotope dilution

A simple, sensitive and reliable analytical method for the rapid simultaneous determination of dexamethasone and betamethasone in milk by high performance liquid chromatography–negative electrospray ionization tandem mass spectrometry (HPLC–NESI-MS/MS) with isotope dilution was developed. Samples were directly purified through C₁₈ cartridge. Then the eluate was dried under nitrogen and residues were dissolved in mobile phase. Samples were analyzed by HPLC–MS/MS on a Hypercarb graphite column with a mixture of acetonitrile–water–formic acid as mobile phase. The samples were quantified using dexamethasone-D₄ as an internal standard. The procedure was validated according to the European Union regulation 2002/657/EC determining specificity, decision limit (CCα), detection capability (CCβ), trueness, precision, linearity and stability. The method is demonstrated to be suitable for the determination of dexamethasone and betamethasone in milk. The total time required for the analysis of one sample was about 35 min.     

Accurate analysis of trace pentachlorophenol in textiles by isotope dilution liquid chromatography-mass spectrometry

A highly accurate method for measuring pentachlorophenol (PCP) concentrations in textile samples was developed. This highly accurate method for the analysis of textile samples is valuable, given the inherent challenges associated with the complexity of the sample matrix. This method can be applied to certify the concentration of pentachlorophenol in textile CRMs. A measurement procedure based on isotope dilution liquid chromatography-isotope dilution mass spectrometry (LC-IDMS) was developed. Samples were pretreated with acid and then with n-hexane. Excellent precision was obtained. The validated concentration ranges for the method were 1.0-50 ng/g, the LOD was 1.0 ng/g, and the LOQ was 5.0 ng/g. The precision of this method is in the range of 0.80-1.40%. The method can trace to mass.