Computational studies on the cyclization of polycyclic aromatic hydrocarbons in the synthesis of curved aromatic derivatives.

Computational studies on the cyclization reactions of some polycyclic aromatic hydrocarbons (PAHs) were performed at the DFT level. Compounds C26H14 and C24H14, which show the connectivity of C60 fullerene fragments, were chosen as suitable models to study the formation of curved derivatives by six- or five-membered ring formation, upon oxidation to their radical cations. Four possible pathways for the cyclization process were considered: a) initial C-C bond formation to afford a curved derivative, followed by dehydrogenation; b) homolytic C-H cleavage prior to cyclization; c) initial concerted H2 elimination and subsequent cyclization; and d) deprotonation of the radical cations prior to cyclization. Computed reaction and activation energies for these reactions show that direct cyclization from radical cations (pathway a) is the lowest-energy mechanism. The formation of five-membered rings is somewhat more favourable than benzannulation. After new cycle formation, homolytic C-H dissociation to afford the corresponding cations is the most favourable process. These cations react with H* without barrier to give H2* Intermediate deprotonations are strongly disfavoured. The relatively low activation energies compared with carbon cage rearrangements suggest that ionization of PAHs can be used for the tailored preparation of nonplanar derivatives from suitable precursors.     

Copper catalysis in the construction of indole and benzo[b]furan rings

This perspective reports on some of the main copper-catalyzed routes to the construction of the pyrrole and furan rings incorporated into the indole and benzo[b]furan systems, respectively. The first part illustrates the synthesis of indoles through cyclizations of 2-alkynylanilid(n)es, preformed or generated in situ, and cyclizations via intramolecular N-arylation, N-vinylation, and C-C bond forming reactions. The second part illustrates the synthesis of benzo[b]furans through cyclizations of preformed 2-alkynylphenols, domino synthesis of 2-alkynylphenols/cyclization processes, and cyclizations via intramolecular O-arylation reactions.     

Regioselective one-pot synthesis of 9-alkyl-6-chloropyrido[3,2-e][1,2,4]triazolo[4,3-a]pyrazines. Reactivity of aliphatic and aromatic hydrazides

[reaction: see text] The one-pot synthesis of new 9-alkyl-6-chloropyrido[3,2-e][1,2,4]triazolo[4,3-a]pyrazines has been achieved. Hydrazides regioselectively reacted as nucleophiles with the 3-chloro substituent of 2,3-dichloropyrido[2,3-b]pyrazine. An intramolecular cyclization afforded the tricycle nonxanthine adenosine receptor antagonists.     

Synthesis of pyrrolo- and pyrido[1,2-a]xanthene [1,9-de]azepines: a study of the azepine ring construction

Pentacyclic pyrrolo- and pyrido[1,2-a]xanthene[1,9-de]azepines were synthesized in various oxidation states by assembling the azepine ring following two strategies: 7-endo-trig cyclization of the aryl radical derived from a gamma-methylene lactam and cyclodehydration of aldehydes. Other strategies examined (Heck reaction and intramolecular acylation) did not afford azepines, but six-membered nitrogenated rings.     

Stereoselective formation of fused tricyclic amines from acyclic aldehydes by a cascade process involving condensation, cyclization, and dipolar cycloaddition

The preparation of tricyclic amines from acyclic precursors is described using a cascade of tandem reactions involving condensation of an aldehyde with a primary amine, cyclization (with displacement of a halide), and then in situ deprotonation or decarboxylation to give an azomethine ylide or nitrone followed by intramolecular dipolar cycloaddition. The methodology is straightforward, and the aldehyde precursors are prepared easily and quickly in high yield using nitrile alkylations followed by DIBAL-H reduction. The relative ease of reaction of various substrates with different tether lengths between the aldehyde and the halide or dipolarophile has been studied. Several primary amines including simple amino acids such as glycine, alanine, and phenylalanine and derivatives such as glycine ethyl ester and also hydroxylamine have been investigated. High yields are obtained in the formation of different tricyclic ring sizes; the dipolar cycloaddition necessarily creates a five-membered ring, and we have investigated the formation of five- and six-membered rings for the other two new ring sizes. In all cases, yields are high (except when using glycine when the tether to the terminal alkene dipolarophile leads to a six-membered ring), and most efficient is the formation of the tricyclic product in which all five-membered rings are formed. Examples with an alkyne as the dipolarophile were also successful. In all the reactions studied, the products are formed with complete regioselectivity and remarkably with complete stereoselectivity. The key step involves the formation of three new rings and potentially up to four new stereocenters in a single transformation. The power of the chemistry was demonstrated by the synthesis of the core ring systems of the alkaloids (+/-)-scandine and (+/-)-myrioneurinol and the total syntheses of the alkaloids (+/-)-aspidospermine, (+/-)-quebrachamine, and (+/-)-aspidospermidine.     

8,9-Didehydrofluoranthenes as building blocks for the synthesis of extended polycyclic aromatic hydrocarbons (PAHs)

[reaction: see text] The synthesis of phenyl-substituted 8,9-dibromofluoranthene and p-dodecylphenyl-substituted 8,9-fluoranthene anthranilic acid is presented. Their synthetic potential as 8,9-didehydrofluoranthene precursors is demonstrated in combination with a new biscyclopentadienone by the synthesis of novel phenyl-substituted PAHs with up to 14 annulated rings. The crystal structure of 7,16-diphenylfluorantheno[8,9-k]fluoranthene is given.     

Efficient One-pot Synthesis of Pyrrolo[2,1-a]isoquinoline and Pyrrolo[1,2-a]quinoline Derivatives

A one-pot sequential reaction for efficient synthesis of pyrrolo[2,1-a]isoquinoline and pyrrolo[1,2-a]-quinoline derivatives has been developed. The reaction included firstly the Cu-catalyzed three-component reaction of isoquinoline(quinoline), acetylenedicarboxylate and alkynylbenzene and then Cs₂CO₃-promoted intramolecular cyclization reaction of initially formed 1-alkenyl-2-alkynyl-1,2-dihydroisoquinoline(1,2-dihydroquinoline).     

Pyrazolo[1,5-a]pyridines as p38 kinase inhibitors

[reaction: see text] A convergent synthesis of substituted pyrazolo[1,5-a]pyridines has been achieved either via a regioselective [3 + 2] cycloaddition of N-aminopyridines with alkynes or by thermal cyclization of disubstituted azirines. Subsequent palladium-catalyzed introduction of pyridines or de novo synthesis of pyrimidines affords inhibitors of p38 kinase.     

Cycloisomerization of 1,6-enynes using acetate as a nucleophile under palladium(II) catalysis

[reaction: see text] An efficient method for the synthesis of five-membered carbo- and heterocyclic compounds, including fused rings, was reported using acetate as a nucleophile in the cyclization of 1,6-enynes under palladium(II) catalysis. The reaction is initiated by trans-acetoxypalladation of the alkynes and quenched by either trans- or cis-deacetoxypalladation in the presence of 2,2'-bipyridine as the ligand. An example of the catalytic asymmetric cyclization is presented with moderate enantioselectivity using chiral bisoxazoline ligand.     

Synthesis of new methylated thieno[2,3‐a] and [3,2‐b]carbazoles by reductive cyclization of 6‐(2′‐Nitrophenyl)benzo[b]thiophenes obtained by palladium‐catalyzed cross‐coupling isabel

The synthesis of new methylated thieno[2,3‐a] and [3,2‐b]carbazoles (5) (R=H) was achieved by a palladium‐catalyzed cross‐coupling, intramolecular reductive cyclization sequence of reactions. The cyclization precursors 6‐(2′‐nitrophenyl)benzo[b]thiophenes (3) were obtained by Suzuki cross‐coupling of 6‐boronated methylbenzo[b]thiophenes intermediates (2) with 2‐bromo or iodonitrobenzene. The boronated intermediates (2) were prepared via bromine‐lithium exchange followed by boron transmetalation and coupled in situ using Pd(OAc)₂ giving thus a “one‐pot” three steps reaction from the 6‐bromobenzo[b]thio‐phenes (1) to the cyclization precursors (3) . In the reductive cyclization step, N‐ethylthienocarbazoles (5) (R=Et) were also obtained. Several experiments have been made varying the amount of triethylphosphite and the time of reaction, to avoid their formation.     

Intramolecular cyclization of delta-iminoacetylenes: a new entry to pyrazino[1,2-a]indoles

[reaction: see text] The synthesis of the pyrazino[1,2-a]indole nucleus was achieved by intramolecular cyclization of several 2-carbonyl-1-propargylindoles in the presence of ammonia. The reaction conditions were optimized using microwave heating and a pool of catalysts. Cyclization of 1-alkynylindole-2-carbaldehydes was easily accomplished under standard heating conditions, whereas microwave heating contributed to reduced reaction times and improved overall yields. Moreover, a fine-tuning of the microwave irradiation time made possible the selective synthesis of both pyrazino[1,2-a]indole isomers. TiCl4 proved the catalytic system of choice to achieve pyrazinoindoles in satisfactory yields starting from 1-alkynyl-2-acetylindoles and 1-alkynyl-2-benzoylindole derivatives. Also in these cases, microwave heating contributed to faster reactions and improved yields. The uncatalyzed versus catalyzed reaction mechanism is discussed.     

Synthesis of nitrogen heterocycles by means of nitrenes

The intramolecular cyclization of heteroanalogs of 1,3-butadien-1-ylnitrenes, the expansion and contraction of the rings of hetarylnitrenes, the incorporation of nitrenes, and the intermolecular dipolar cycloaddition of acylnitrenes to unsaturated compounds, which leads to the formation of five-membered nitrogen heterocycles with several heteroatoms, are examined.See [1] for Part I.Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 5, pp. 579–598, May, 1979.     

Pyrrolodiazines. 2. Structure and Chemistry of Pyrrolo[1,2-a]pyrazine and 1,3-Dipolar Cycloaddition of Its Azomethine Ylides

A new synthesis of the pyrrolo[1,2-a]pyrazine system from pyrrole is described. In light of the ab initio calculations carried out on this heterocyclic system some of its basic chemistry was investigated and included electrophilic substitution, addition of organolithium reagents, metalation with lithium diisopropylamide and subsequent reaction with electrophiles, and formation of salts by quaternization of the nonbridgehead nitrogen. N-ylides obtained from these salts undergo 1,3-dipolar cycloaddition with suitable dipolarophiles to give dipyrrolo[1,2-a]pyrazines, pyrazolo[1,5-a]-pyrrolo[2,1-c]pyrazines, and heterobetaines. Examples of intramolecular 1,3-dipolar cycloadditions are also reported.     

Novel synthetic approach to 6,7-dihydro-5H-imidazo[1,5-a]-pyrazin-8-ones

[reaction: see text] A novel route to highly substituted chiral 6,7-dihydro-5H-imidazo[1,5-a]pyrazine-8-ones starting from Meldrum's acid is disclosed. The key features of the methodology are the incorporation of amino esters as a chiral pool and facile mild intramolecular cyclization to form the pyrazine ring. Incorporation of various substituents at different stages of the synthesis from various building block sets makes this methodology readily amenable to parallel synthesis.     

Tetraalkoxyphenanthrene: a new precursor for luminescent conjugated polymers

[reaction: see text] We have developed a convenient synthesis of tetraalkoxyphenanthrene derivatives and demonstrated their use to form luminescent conjugated oligomers and polymers. Palladium-catalyzed cross-coupling reactions of 2,7-diiodo-3,6-dimethoxy-9,10-di(2-ethylhexyloxy)phenanthrene produced high molecular weight poly(p-phenylene ethynylene)s and low molecular weight poly(p-phenylene vinylene)s. These new polymers, which are luminescent in the solid state and in solution, may be useful for developing LED or solar cell devices, or in chemical sensors.     

Sequential ring-closing metathesis and nitrone cycloaddition on glucose-derived substrates: a divergent approach to analogues of spiroannulated carbanucleosides and conformationally locked nucleosides

The carbohydrate-derived substrate 3-C-allyl-1,2:5,6-di-O-isopropylidene-alpha-D-allofuranose was judiciously manipulated for preparing suitable synthons, which could be converted to a variety of isoxazolidino-spirocycles and -tricycles through the application of ring-closing metathesis (RCM) and intramolecular nitrone cycloaddition (INC) reactions. Cleavage of the isoxazolidine rings of some of these derivatives by transfer hydrogenolysis followed by coupling of the generated amino functionalities with 5-amino-4,6-dichloropyrimidine furnished the corresponding chloropyrimidine nucleosides, which were elaborated to spiroannulated carbanucleosides and conformationally locked bicyclo[2.2.1]heptane/oxa-bicyclo[3.2.1]octane nucleosides. However, use of higher temperature for the cyclization of one of the chloropyrimidines led to the dimethylaminopurine analogue as a sole product, formed via nucleophilic displacement of the chloro group by dimethylamine generated from DMF.     

Ring-expansion approaches for the total synthesis of salimabromide

We describe the evolution of a synthetic strategy for the construction of the marine polyketide salimabromide. Combining a bicyclo[3.1.0]hexan-2-one ring-expansion to build up a functionalized naphthalene and an unprecedented rearrangement/cyclization cascade, enabled synthesis of a dearomatized tricyclic subunit of the target compound. Alternatively, an intramolecular keteniminium [2 + 2]-cycloaddition and subsequent Baeyer–Villiger ring-expansion gave access to the sterically encumbered architecture of salimabromide. Sequential oxidation of the carbon framework finally enabled the total synthesis of this unusual natural product.     

Nucleophilic addition to electron-rich heteroaromatics: dearomatizing anionic cyclizations of pyrrolecarboxamides

[reaction: see text] Despite its electron-rich nature, a pyrrole ring is susceptible to intramolecular nucleophilic attack by organolithiums. The resulting dearomatizing anionic cyclization yields new 5- or 7-membered heterocyclic rings. Formation of a new 5-membered ring, by cyclization of an N-benzylpyrrolecarboxamide, is accompanied by ring opening of the original pyrrole to yield 3-aminovinylpyrrolinones. Formation of a new 7-membered ring, by cyclization of an N-allyl pyrrolecarboxamide, yields bicyclic pyrroloazepinones.     

Competition between alkenes in intramolecular ketene-alkene [2 + 2] cycloaddition: what does it take to win?

In the course of developing a new synthetic methodology using ketenes in sequential cycloaddition steps, we were faced with a competition problem with molecules containing a ketene tethered to more than one reacting partner. To pinpoint the electronic and tethering requirements for a chemoselective reaction, we undertook a series of ketene-alkene [2 + 2] cycloaddition competition experiments. Those experiments were conducted on molecules containing either two identical alkenes having different tether lengths or two alkenes having the same tether length but being electronically different. We demonstrated that the reaction is much faster for forming five-membered rings than six-membered rings and calculated the Hammett constant rho for intramolecular ketene-alkene [2 + 2] cycloadditions to be -1.39.     

Aromatic foldamers with iminodicarbonyl linkers: their structures and optical properties

[structure: see text] Carboxamides possessing naphthalene rings connected by multiple iminodicarbonyl linkers were synthesized. These molecules forced the naphthalene rings to be placed in the positions facing each other, and they form helical foldamers both in solution and in the crystalline state. Their folding structures were investigated by single-crystal X-ray analysis and (1)H NMR spectroscopy. Their absorption and fluorescence spectra showed a red shift as the number of naphthalene moieties increased. This remarkable change is based on the intramolecular interaction between naphthalene moieties. Helicity of the foldamer can be controlled by the introduction of chiral auxiliaries at imide nitrogen atoms, which results in an observation of induced circular dichroism.