基于聚丙交酯的多嵌段聚氨酯的形状记忆性能和生物相容性

制备了以聚丙交酯(PLA)为软段, 2,4-甲苯二异氰酸酯(TDI)与乙二醇(EG)反应产物为硬段的多嵌段聚氨酯(PLA-PU), 并对其形状记忆效应和生物相容性进行了研究. 形状压缩50%的样品从起始恢复温度(22~37 ℃)开始, 在10 ℃范围内可以恢复到起始形状, 形变恢复率接近100%, 形变恢复力最大值达到1.5~4 MPa. 细胞培养实验结果初步证明PLA-PU的细胞相容性与PLA相当, 因而有可能用作植入形状记忆医疗器械材料.     

星形PLA-PEG嵌段共聚物胶束的制备与表征

以胆酸为引发剂,用辛酸亚锡催化丙交酯开环聚合合成星型CA-PLA。利用DCC为脱水剂,将不同分子量的端羧基化PEG与星型CA-PLA偶联,合成一系列以胆酸为核的星形两亲性嵌段共聚物,用透析法制备共聚物胶束,并用TEM和DLS研究胶束的性质。合成了分子量为6000和12000的两种CA-PLA,其分子量可以通过胆酸羟基与丙交酯的比例进行控制。将分子量2000和5000的PEG分别与两种CA-PLA偶联,合成了四种星型CA-PLA-PEG嵌段共聚物。共聚物胶束形貌为均匀的球形,粒径为20-40nm,且随共聚物中PLA链段分子量的增加而增大,随PEG链段分子量的增加而减小。临界胶束浓度(CMC)低于同等链段长度的线型PLA-PEG嵌段共聚物胶束。     

三臂PPO-PDLA-PLLA 嵌段共聚物的制备与结构及其立构复合体的结晶行为

以环氧丙烷聚醚三元醇(PPO)为起始剂, 开环聚合D 型丙交酯(DLA), 合成三臂环氧丙烷聚醚三元醇-聚右旋乳酸(PPO-PDLA)嵌段预聚体. 采用端基活化技术对预聚体进行端羟基活化, 再与L 型丙交酯(LLA)进行逐步开环聚合,合成了不同分子量的三臂环氧丙烷聚醚三元醇-聚右旋乳酸-聚左旋乳酸(PPO-PDLA-PLLA)嵌段共聚物. 采用红外(FTIR)、核磁(NMR)和凝胶渗透色谱(GPC)等对三臂PPO-PDLA-PLLA 嵌段共聚物的测试表明, 合成的嵌段共聚物分子链具有很高的立构规整度; 通过调节LLA 单体与PPO-PDLA 预聚体的投料比, 不仅可控制产物的分子序列结构, 而且样品的数均分子量可大于100 kDa. 差示扫描量热仪(DSC)和广角X 射线衍射(WAXD)结果显示, 三臂PPO-PDLAPLLA嵌段共聚物的异构体链段分子间生成立构复合晶体, 其熔点约为200 ℃, 且没有PLLA 均聚物链段结晶现象. 实验结果表明, 这是一类具有实际应用价值的新型耐热聚乳酸(PLA)材料.     

聚(ε-己内酯-L-丙交酯)无规共聚物与聚乳酸共混材料的制备与性能

通过开环聚合,合成不同比例的ε-己内酯(ε-CL)与L-丙交酯(L-LA)的无规共聚物P(CL/LLA)。 将上述共聚物P(CL/LLA)与聚乳酸(PLLA)共混,制备了PLA/P(CL/LLA)共混材料。 并对其相容性、热性能、力学性能进行了研究。 结果表明,共聚物P(CL/LLA)与PLA相容性与共聚物中LA单元含量和链段的平均长度有密切关系,P(CL/LLA)中LA链段平均长度达到3.4以上时,可以与PLA很好的相互作用。 同时共聚物P(CL/LLA)中-CL-链段有很好的柔性,可以很好的改善PLLA的韧性,使PLLA材料的断裂伸长率达到500%以上。     

聚酯的序列结构对聚氨酯弹性体形貌的影响

以己二酸(AA),1,4-丁二醇(BDO),乙二醇(EG)分别采用一步法、二步法合成分子量为3000的聚酯PAEB-R和聚酯PAEB-A.再分别与二苯基甲烷二异氰酸酯(MDI)、扩链剂1,4-丁二醇(BDO),乙二醇(EG)反应分别合成固含量30%与粘度为20000的聚氨酯(PAEB-R)-MDI-TPU和聚氨酯(PAEB-A)-MDI-TPU.SEM、AFM表明不同工艺所合成的聚氨酯均存在微相分离,且聚氨酯(PAEB-R)-MDI-TPU微相分离程度高于(PAEB-A)-MDI-TPU.     

三臂支化PLLA-PDLA嵌段共聚物的合成及立构复合结晶行为

以三羟甲基乙烷为起始剂, 开环聚合L-丙交酯(LLA), 合成三臂支化左旋聚乳酸(PLLA)预聚物. 采用端基活化技术对预聚物进行端羟基活化, 再与D-丙交酯(DLA)进行开环聚合, 合成了不同分子量的三臂支化左旋聚乳酸-右旋聚乳酸(PLLA-PDLA)嵌段共聚物. 采用核磁共振谱和凝胶渗透色谱等对样品的结构和分子量进行测试, 结果表明,合成的嵌段共聚物链结构具有链段立构规整度和高分子量的特点; 通过调节DLA单体与PLLA预聚物的投料比, 可实现对PLLA-PDLA嵌段共聚物的序列结构调控. 差示扫描量热仪和广角X 射线衍射结果表明, 三臂支化PLLA-PDLA嵌段共聚物的异构体分子间生成立构复合晶体, 其熔点高于200℃; 共聚物的嵌段序列结构对材料的凝聚态转变行为有很大的影响.     

载有胰岛素的可生物降解微球的制备与表征

用乙交酯与丙交酯的无规共聚物(PLGA)和聚乙二醇单甲醚-聚丙交酯两嵌段共聚物(MPEG-PLA)的合金作为囊材料,包裹胰岛素固体粉末,包裹率分析表明,固体粉末法对胰岛素的包裹率高于双乳液法.所得微球球形很好,尺寸在1～3μm范围,剖面具有核壳结构,胰岛素以晶粒的形式包裹在高分子壳层中.两种高分子在凝聚过程中发生相分离,在壳层中有分层现象.测定微球的体外释放行为,由聚合物合金制备的微球的暴释现象得到了缓解,两种聚合物的配比不同,其暴释缓解的程度也不一样.     

聚丙交酯/聚乙二醇多嵌段共聚物的合成及其性能

聚丙交酯 (ＰＬＬＡ)由于具有良好的生物降解性和生物相容性 ,在医学领域已经得到了广泛的临床应用 ,近来又被制备成细胞支架大量应用于组织工程中[1,2 ] ,但由于其疏水性而造成细胞亲和性不好 .聚乙二醇 (ＰＥＧ)具有良好的亲水性 ,良好的生物相容性 ,但是ＰＥＧ是非降解性的 ,只有低分子量的ＰＥＧ可以被吞噬细胞所吞噬或透过肾滤膜而排出体外 ,因此 ,低分子量的ＰＥＧ常被用来与丙交酯 (Ｌ ＬＡ)共聚以改善ＰＬＬＡ支架的亲水性 .聚丙交酯 聚乙二醇共聚物 (ＰＬＥ)的三嵌段及两嵌段共聚物的合成及其性能的研究已被广泛报道[3～ 5] .研究…     

含不同侧氨基密度的PLGA-(ASP-Diol)x-PLGA共聚物的合成与表征

以N-(苄氧羰基)-L-天冬氨酸和亚硫酰氯反应制备了N-苄氧基天冬氨酸酐,将其与不同链长的二醇(乙二醇、二缩三乙二醇、聚乙二醇200和600)缩聚,合成了含端羟基的天冬氨酸-二醇交替预聚物(ASP-Di-ol)x;以其为大分子引发剂,辛酸亚锡为催化剂进行丙交酯/乙交酯(摩尔比75∶25)开环共聚,合成系列含侧氨基的天冬氨酸-二醇-聚乙丙交酯[PLGA-(ASP-Diol)x-PLGA]多元三嵌段共聚物.用FTIR,1HNMR,EA,DSC和GPC对共聚物结构进行表征.结果表明,影响预聚物分子量的主要因素不是二醇的分子量,而是其端羟基的活性.随着二醇链段长度增加,多元共聚物中氨基含量降低,玻璃化转变温度也明显下降.通过改变二醇链段的长度(或分子量)可有效地控制PLGA-(ASP-Diol)x-PLGA中侧氨基的密度及分布.     

不同软段长度PBT-co-PBS-b-PEG嵌段共聚物的合成与表征

用熔融缩聚法合成了一系列具有不同软段长度的聚对苯二甲酸丁二酯 (PBT) co 聚丁二酸丁二酯(PBS) b 聚乙二醇 (PEG)嵌段共聚物 (PTSG) ,考察了PEG分子量 (Mn(PEG) )及PBS摩尔分数 (MPBS)对材料性能的影响 实验表明 ,随Mn(PEG)增加 ,缩聚反应时间延长 ,所得产物分子量均呈较为对称的单峰分布 ,多分散性指数小于 2 0 硬段序列结构分析显示 ,随MPBS 增加 ,PBT平均序列长度减小 ,而PBS平均序列长度增加 ,二者呈无规分布 .受组成及硬段平均序列长度变化影响 ,材料内部呈微观相分离状态 ,DSC曲线上可分别观察到软、硬段熔点及玻璃化转变温度 ;硬段熔点及结晶度随MPBS升高而降低 ,主要是受其平均序列长度变化及共晶作用所致 .材料断裂延伸率及降解速率均随Mn(PEG)及MPBS增加而增加 ,可见提高软段长度及降低硬段结晶度等均能有效改善共聚物高分子链的柔韧性及亲水性 ,赋予共聚物更好的降解性能 .     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.