Some reactions of 4-[(2′,3′-diphenyl-6′-methoxy-5′-benzofuranyl)-methylene]- and 4-[(2′,3′-diphenyl-5′-methoxy-6′-benzofuranyl)-methylene]-2-phenyloxazolin-5-one

2,3-Diphenyl-5-formyl-6-methoxybenzofuran was reacted with hippuric acid to give 4-[(2′,3′-diphenyl-6′-methoxy-5′-benzofuranyl)methylene]-2-phenyloxazolin-5-one. The above mentioned oxazolone yielded 2,3-diphenyl-6-methoxybenzofuranylacetic acid by reaction with hydrazine hydrate, nitrous acid, benzene followed by acid hydrolysis. The reactions of the oxazolone with hydroxylamine hydrochloride and primary or secondary amines were also investigated.     

Reaction of 1,1′-iminobis-2-butanols with sulfuric acid

Treatment of 1,1′-iminobis-2-butanols with 70% w/w sulfuric acid gives cis- and trans-2,6-diethylmorpholines, 3-ethyl-4-methylpyridine and unsaturated 3-ethyl-4-methylpiperidines. Hydrogenation of the unsaturated 3-ethyl-4-methylpiperidines gives cis- and trans-3-ethyl-4-methylpiperidines. With 50% w/w sulfuric acid cis- and trans-2,6-diethylmorpholines and a small amount of cis- and trans-2-ethyl-7-methyl-hexahydro-1,4-oxazepines are obtained.     

Preparation of polyamides via the phosphorylation reaction. Poly-4,4′-benzanilides

4,4′-Diaminobenzanilide (DAB) was reacted with diacids via the Yamazaki phosphorylation reaction to yield simple polyamides and random copolyamides. The use of DAB was found to promote polycondensation because DAB contains a preformed amide linkage which minimizes the amounts of by-products formed. It also maximizes polymer solubility since the monomer is unsymmetrical. The order of the inherent viscosity values of the polymers obtained from DAB by reaction with different diacids, isophthalic > aliphatic > terephthalic, was found to parallel polymer solubility in the reaction medium. The inherent viscosity of the polyamide based on terephthalic acid, DAB-T, was increased greatly by copolymerization, isophthalic acid being more effective than an aliphatic diacid in this regard. None of the polymers formed a thermotropic nematic phase, but the copolymer having an equimolar ratio of terephthalic and adipic acid formed anisotropic solutions in 100% sulfuric acid at polymer concentrations exceeding 40%. Strong films were cast from such solutions.     

Ytterbium(III) triflate: An efficient and simple catalyst for isomerization of 2′‐hydroxychalcone and 2′‐aminochalcones in ionic liquid

Isomerization of 2′‐hydroxychalcone and 2′‐aminochalcone have been investigated using ytterbium(III) trifluromethanesulfonate {Yb(OTf)₃} (30 mol %) as Lewis acid catalyst in [bmim][BF₄] ionic liquid. The effect of different metal triflates as Lewis acid, catalyst loading and reaction media was studied for this isomerization reaction. Advantages of the methodology include short reaction time, excellent yields, catalytic use of Lewis acid, and recovery and reuse of the catalyst. J. Heterocyclic Chem., (2011).     

3′,4′-Diethynl-2′,3′,5′-trideoxy-5′-noruridine: A new self-polymerizable 2′-deoxyribonucleoside analogue

In 10 steps, 3′,4′-diethynyl-2′,3′,5′-trideoxy-5′-noruridine ( 14 ) was synthesized in 5% overall yield from commercial uridine, using conventional methods of nucleoside chemistry. As two functional groups capable to react with each other are present in the same molecule, the synthetic compound is able to form polymers, similar to the polynucleotides, by an acetylene coupling reaction.     

Preparation of 5,5′‐pyrilidene and 5,5′‐quinolidene bis‐barbituric acid derivatives

NMR reaction following experiments were used to find optimal conditions for the barbituric acid double addition to aromatic and heteroaromatic carboxaldehydes. It was established that aromatic aldehydes with electron‐donating substituents such as hydroxy, methoxy, and dimethylamino produce only the single addition barbituric acid adduct (barbituric acid benzylidenes). If these electron‐donating substituents are transformed into electron‐withdrawing substituents by virtue of protonation (NMe₂ to NHMe₂⁺) then the double barbituric acid adduct becomes the sole product of the reaction. This is also true regardless of the reaction media if strong electron‐withdrawing substituents (such as a nitro group) are present. Considering that the reactive species for nitrogen containing aromatic heterocycles are actually the conjugated acids (electron deficient molecule) only the double barbituric acid adducts are isolated. All synthetic procedures presented are applicable to multi‐gram scale preparations of double barbituric acid adducts.     

Nitration of 2,3′-bithienyl

The nitration of 2,3′-bithienyl ( 1 ) with fuming nitric acid in acetic anhydride at 0° gives a mixture of 3-nitro- ( 2 ), 2′ -nitro- ( 3 ) and 5-nitro-2,3′-bithienyl ( 4 ) with relative percentages of 38.7%, 34.8% and 26.5%. When the nitration of 1 was carried out with fuming nitric acid in acetic acid at 20°, the same compounds 2, 3 and 4 were obtained, but with different relative percentages: 20.4%, 36.5% and 43.1% respectively. The results of the mononitration of 1 are compared with those obtained in other electrophilic substitutions and with the theoretical predictions. The further nitrations of 2, 3 and 4 with nitric acid in acetic anhydride at room temperature lead to the formation of five dinitro-2,3′-bithienyl isomers. Compound 2 gives a mixture of 2′,3-dinitro- ( 5 ) and 3,5′-dinitro-2,3′-bithienyl ( 6 ); compound 3 gives a mixture of 5 , 2′,5-dinitro- ( 7 ) and 2′,4-dinitro-2,3′-bithienyl ( 8 ); compound 4 gives 7 and 5,5′-dinitro-2,3′-bithienyl ( 9 ). The possible reasons of the formation of the various dinitro-2,3′-bithienyl isomers are discussed.     

Synthesis and reduction of thieno[2′,3′(3′,2′ or 3′,4′):5,6]-azocino[2,1-a]isoindole-7, 13-diones

A synthesis of the thieno[2′,3′(3′,2′ or 3′,4′):5,6]azocino[2,1-a]isoindole-7,13-diones 6a-c was developed from N-thienylethylphthalimides 3a-c using a Wittig reaction followed by a Friedel-Crafts cyclization of acetic acid derivatives 5a-c . Reduction of ketones 6a-c into alcohols 7a-c was stereo specific.     

3′-Methylsulfinyl-3,4′-diquinolinyl sulfides

Reactions of 4-methoxy- or 1,4-dihydro-4-oxo-3′-methylthio-3,4′-diquinolinyl sulfides 1 and 7 with a nitrating mixture ran as the 3′-methylthio group 5-mono-oxidation followed by C₆- and C₈-nitration and led to the mixture composed of products 3, 4, 5 and 6 (in the case of substrate 1 ) or compounds 5 and 6 (for substrate 7 ). In the reaction with hydrochloric acid 4-methoxy-3′-methylsulfinyl-3,4′-diquinolinyl sulfides 3 and 4 could be hydrolysed to 3′-methylsulfinyl-4(1H)-quinolinones 5 or 6 respectively, the methylsulfinyl group remaining unaffected.     

Synthesis of Some Novel Phenyl Substituted Oxothiazolidin- 1’’,3’’,4’’-thiadiazolo-[3’,4’-b]thiazoline of 3β-Substituted Cholestane

Three title compounds 4a—4c have been synthesized by the cyclodehydration of 1’-benzylidine-4’-(3β-substituted-5α-cholestane-6-yl)thiosemicarbazones 2a—2c with thioglycolic acid followed by the treatment with cold conc. H2SO4 in dioxane. The compounds 2a—2c were prepared by condensation of 3β-substituted-5α-cholestan- 6-one-thiosemicarbazones 1a—1c with benzaldehyde. These thiosemicarbazones 1a—1c were obtained by the reaction of corresponding 3β-substituted-5α-cholestan-6-ones with thiosemicarbazide in the presence of few drops of conc. HCl in methanol. The structures of the products have been established on the basis of their elemental, analytical and spectral data.     

Possible structural effect of a′,b′‐dihydroxyacetophenone units in the preformed oligoesters upon copolycondensation with isomeric c′,d′‐dihydroxyacetophenones by TsCl/dimethylformamide/pyridine

A two‐stage copolycondensation of a mixture of equal parts of isophthalic acid and terephthalic acid first with a′,b′‐dihydroxyacetophenone (a′,b′‐DHAP) and then with isomeric c′,d′‐DHAP was examined at 60 and 80 °C. A structurally selective reaction was observed. At 80 °C, the preformed oligomers from symmetrically substituted 2′,6′‐DHAP reacted better with similarly substituted 2′,6′‐ or 3′,5′‐DHAP to give the copolymers of significantly higher inherent viscosity values than from the reaction with asymmetrically substituted 2′,4′‐DHAP, whereas at 60 °C they did almost equally well with any c′,d′‐DHAP. Similarly, the reaction of oligomers from 2′,4′‐DHAP with asymmetrically substituted 2′,4′‐DHAP or 2,4‐dihydroxybenzophenone yielded better results than those from the reaction with 2′,6′‐ or 3′,5′‐DHAP at both temperatures. The copolycondensations with comonomers of the structure independent of DHAPs were not affected by the preformed oligomers from DHAPs. The results are discussed in terms of the distributions of resulting oligomers determined by gel permeation chromatography. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 616–623, 2003     

C2-Symmetric 4,4′,5,5′-Tetrahydrobi(oxazoles) and 4,4′,5,5′-Tetrahydro-2,2′-methylenebis[oxazoles] as Chiral Ligands for Enantioselective Catalysis Preliminary Communication

The synthesis of a series of enantiomerically pure, C₂-symmetric 4,4′,5,5′-tetrahydro-2,2′-methylenebis[oxazoles] and 4,4′,5,5′-tetrahydro-2,2′-bi(oxazoles) is reported. Copper complexes with anionic tetrahydromethylenebis[oxazole] ligands are efficient catalysts for the enantioselective cyclopropane formation from olefins and diazo compounds (up to 96% ee in the reaction of styrene with menthyl diazoacetate). Tetrahydrobi(oxazole)iridium(I) complexes were found to catalyze transfer hydrogenations of aryl alkyl ketones with i-PrOH (up to 91% ee). Tetrahydrobi(oxazole)palladium complexes can be used as enantioselective catalysts for allylic nucleophilic substitution (up to 77% ee in the reaction of PhCH?CHCH(OAc)Ph with NaHC(COOMe)₂).     

Zur Kenntnis der Indolreaktion nach Fischer. II. Thermische und säurekatalysierte Indolisierung von 1′-Alkenyl-2′-methyl-2′-phenylacetohydraziden

On the Fischer-Indole Reaction. II. Thermal and Acid Catalysed Indolization of 1′-Alkenyl-2′-methyl-2′-phenylacetohydrazides Seven different 1′-alkenyl-2′-methyl-2′-phenylacetohydrazides, 6a-g , have been prepared by treatment of the methylphenylhydrazones 7 of appropriate ketones and aldehydes with acetyl chloride in pyridine. At 170° 6a-g are transformed into the N-methylindoles 3a-g and acetamide in moderate yield. N-Methylaniline is the other major reaction product indicating that homolytic cleavage of the weak N, N-bond in 6 is a major primary reaction step. It is likely but not proven that the N-methylindoles 3 are formed in a reaction sequence initiated by an uncatalysed concerted [3, 3]-sigmatropic rearrangement. Upon treatment of 6 with 0.5N dichloroacetic acid in anhydrous acetonitrile at room temperature a quantitative conversion to 3 is observed, interpreted as proceeding by a charge induced [3, 3]-sigmatropic rearrangement of protonated 6 in the rate determining step. The ketone derivatives 6a-e (R¹ = alkyl) react 40-1000 times faster with acid than the aldehyde derivatives 6f and 6g (R¹ = H). This is rationalized as a consequence of the increased basicity of 6a-e relative to 6f and 6g caused by a steric effect.     

Preparation of 3-(3′-,4′-Hydroxyphenyl)sydnones

3-(3′-,4′-Hydroxyphenyl)sydnones were prepared by dealkylation of 3-(3′-,4′-alkoxyphenyl)sydnones with concentrated sulfuric acid at room temperature in a range of 59 to 86% yield.     

Thiiranation of 2′‐adamantylidene‐9‐benzonorbornenylidene using 4,4′‐oligothiodimorpholine and brønsted acid

On leaving 4,4′‐dithiodimorpholine 6 powder undisturbed at room temperature over 10 years, it led to the formation of 4,4′‐tetrathiodimorpholine 7 . Reactions of 2′‐adamantylidene‐9‐benzonorbornenyidene 1 with 6, 7 , and 4,4′‐thiodimorpholine 8 and a Brønsted acid in CH₂Cl₂ at room temperature proceeded to afford the corresponding thiiranes, 2 and 3 . The order of reactivity of 4,4′‐oligothiodimorpholines combined with a Brønsted acid is 7 > 6 > 8 . The thiirane 3 was transformed to 1 and 2 under the reaction conditions. © 2009 Wiley Periodicals, Inc. Heteroatom Chem 20:12–18, 2009; Published online in Wiley InterScience ( www.interscience.wiley.com ). DOI 10.1002/hc.20505     

Cyclic and multicyclic poly(ether sulfone)s by polycondensation of 5,5′,6,6′‐tetrahydroxy‐ 3,3,3′,3′‐tetramethyl spirobisindane and 4,4′‐difluorodiphenylsulfone

5.5′,6,6′‐Tetrahydroxy‐3,3,3′,3′‐tetramethyl spirobisindane (TTSBI) was polycondensed with 4,4′‐difluorodiphenylsulfone (DFDPS) in DMSO with K₂CO₃ as catalyst and azeotopic removal of water. The feed ratio of DFDPS/TTSBI was varied from 1.0/1.0 to 2.0/1.0 at concentrations avoiding gelation. At feed ratios around 1.0/1.0 hyperbranched polymers were a minority and cyclic poly(ether sulfone)s were the predominant reaction products. With increasing feed ratio of DFDPS more and more multicyclic polymers were formed, and at a feed ratio of 1.9/1.0 perfect multicycles free of functional groups were the vast majority of the reaction product. Despite variation of the reaction conditions quantitative conversion was not achieved. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5597–5605, 2007     

Wholly aromatic thermotropic liquid crystalline polyesters of 3,3′-bis(phenyl)-4,4′-biphenol with 4,4′-benzophenone dicarboxylic acid

A series of wholly aromatic, thermotropic polyesters, derived from 3,3′-bis(phenyl)-4,4′-biphenol (DPBP), nonlinear 4,4′-benzophenone dicarboxylic acid (4,4′-BDA), and various linear comonomers, were prepared by the melt polycondensation reaction and characterized for their thermotropic properties by a variety of experimental techniques. The homopolymer of DPBP with 4,4′-BDA had a fusion temperature (T_f) at 265°C, exhibited a nematic phase, and had a liquid crystalline range of 105°C. All of the copolyesters of DPBP with 4,4′-BDA and either 30 mol % 4-hydroxybenzoic acid (HBA), 6-hydroxy-2-naphthoic acid (HNA), or 50 mol % terephthalic acid (TA), 2,6-naphthalenedicarboxylic acid (2,6-NDA) had low T_f values in the range of 220–285°C, exhibited a nematic phase, and had accessible isotropization transitions (T_i) in the range of 270–420°C, respectively. Their accessible T_i values would enable one to observe a biphase structure. Each of the copolymers with HBA or HNA had a much broader range of liquid crystalline phase. In contrast, each of the copolymers with TA or 2,6-NDA had a relatively narrow range of liquid crystalline phase. Each of these polyesters had a glassy, nematic morphology that was confirmed with the DSC, PLM, WAXD, and SEM studies. As expected, they had higher glass transition temperatures (T_g) in the range of 161–217°C than those of other liquid crystalline polyesters, and excellent thermal stabilities (T_d) in the range of 494–517°C, respectively. Despite their noncrystallinity, they were not soluble in common organic solvents with the exception that the homopolymer and its copolymer with TA had limited solubility in CHCl₃. However, they were soluble in the usual mixture of p-chlorophenol/1,1,2,2-tetrachloroethane (60/40 by weight) with the exception of the copolymer with 2,6-NDA. © 1997 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 35: 769–785, 1997     

3,3′-Oxybispyridine and the polarographic reduction of 1,1′-dimethyl-3,3′-oxybispyridinediium diiodide

3,3′-Oxybispyridine is prepared by reaction of 3-hydroxypyridine with 3-bromopyridine and converted to the 1,1′-dimethyl diquaternary salt with methyl iodide. The salt is reduced polarographically by a one electron transfer not involving hydrogen to an unstable radical cation at a potential (E_o) of ?0.81 V in the pH range 6.3-12.0.     

Synthesis and property of soluble poly(1,1′-dialkyl-3,3′-ferrocenylenevinylene)s via titanium-induced dicarbonyl-coupling reaction of 1,1′-dialkylferrocene-3,3′-dicarbaldehydes

1,1′-Dialkylferrocene-3,3′-dicarbaldehydes ( 1a–c ) with long alkyl chains such as ethyl, hexyl, and dodecyl groups were prepared in 13–25% yield via three-step reactions. The titanium-induced dicarbonyl-coupling reaction of 1a–c gave poly(1,1′-dialkyl-3,3′-ferrocenylenevi-nylene)s ( 2a–c ) in quantitative yields, which were the molecular weights of 3000–10,000 and highly soluble in chloroform, benzene, and hexane. The electrical conductivity and the third-order nonlinear optical susceptibility for poly(1,1′-dihexyl-3,3′-ferrocenylenevinylene) ( 2b ) were estimated to be 1 × 10^?2 S/cm on doping with iodine and 1–4 × 10^?12 esu at a wavelength of 1–2.4 μm, respectively. © 1995 John Wiley & Sons, Inc.     

Synthetic and spectral studies of novel spiro {bicyclo[3,3,0]octene‐8,3′(2′H)‐indol}‐2′‐ones obtained from indol‐2,3‐diones

The present article reports our approach toward the synthesis of spiro compounds via indol‐2,3‐diones. Thus, reaction of indol‐2,3‐dione derivatives with a secondary cyclic amino acid, namely, (R)‐(−)‐thiazolidine‐4‐carboxylic acid, affords a thiazolo‐oxazolidinone as the main product. When the reaction is carried out in the presence of a dipolarophile, 1,3‐dipolar cycloaddition to the intermediate azomethine ylide leads to a novel spiro compound. The products have been characterized on the basis of spectral studies, and the geometry of the intermediate iminium compound has been optimized by use of the semiempirical molecular orbital method. © 1999 John Wiley & Sons, Inc. Heteroatom Chem 10: 381–384, 1999