Studies on reactions of the N-phosphonium salts of pyridines. XIII. Direct polycondensation reaction of carbon dioxide or disulfide with diamines under mild conditions

Polyureas of high molecular weight were obtained by the direct polycondensation reaction of carbon dioxide with diamines at 40°C for several hours under a pressure of carbon dioxide (below 30 atm) by use of diphenyl phosphite in pyridine. Optimal temperature and pressure were 40°C and 20 atm of carbon dioxide. The polycondensation reaction was also affected by solvents and type and amounts of tertiary amines. Pyridine was most effective as tertiary amine and solvent as well. Of the phosphorous compounds used, triaryl phosphites and diphenyl phosphite were most effective, but trialkyl phosphites failed to give polymer. The reaction was assumed to proceed via a carbamyl N-phosphonium salt of pyridine formed by dephenoxylation of phosphites. Similarly, polythioureas were prepared by heating a mixture of carbon disulfide, diamines, and diphenyl phosphite in pyridine at 40°C for 6 hr under nitrogen.     

The reaction of diphenyl carbonate with amines and its application to polymer synthesis

Selective formation of biscarbamates from diphenyl carbonate (DPC) and diamines and the preparation of polyurethanes from the carbamates and diols under mild conditions were studied. The reaction of DPC and diamines was significantly affected by catalysts, biscarbamates being exclusively prepared in high yields in the presence of 2-hydroxypyridine. The polycondensation reaction of the biscarbamates with diols was facilitated by catalysts such as metal salts; among the catalysts examined magnesium chloride in pyridine gave the best results. Metal chlorides in pyridine also promoted the reaction of DPC with aromatic amines to give the corresponding ureas, and the direct synthesis of polyureas was achieved by the polycondensation of DPC with diamines in the presence of the chloride.     

Synthesis of aromatic polyamide-phthalimidines from chloroformylphthalides and aromatic diamines

New polymer-forming monomers, 3-benzylidene-5-chloroformylphthalide and 3-benzylidene-6-chloroformylphthalide, were synthesized by the Perkin reaction of trimellitic anhydride with phenylacetic acid, followed by chlorination. The polycondensation of these monomers with aromatic diamines in N-methyl-2-pyrrolidone at 200°C afforded aromatic polyamide-phthalimidines having inherent viscosities of 0.2-0.5 dL/g. All the polymers were readily soluble in m-cresol, pyridine, dimethylformamide, and dimethyl sulfoxide. Glass transition temperatures of some of the polymers were in the range of 255–282°C. The polyamide-phthalimidines began to lose weight at around 300°C in both air and nitrogen atmospheres, with 10% weight losses being recorded at 435–475°C in nitrogen by thermogravimetry.     

Synthesis of aliphatic–aromatic polyamides by palladium-catalyzed polycondensation of aliphatic diamines,aromatic dibromides,and carbon monoxide

Aliphatic–aromatic polyamides were synthesized by the palladium-catalyzed polycondensation of aliphatic diamines, aromatic dibromides, and carbon monoxide. The effects of variables, such as the kind and amount of base, reaction temperature, and the kind of palladium catalyst were investigated in detail on the reaction of hexamethylenediamine and bis(4-bromophenyl) ether with carbon monoxide. Inherent viscosities of the polyamides were between 0.13 and 1.21 dL/g and varied markedly with the structure of the diamine component. Solubility of the polyamides decreased with increase of chain length of aliphatic diamines, and the polyamides derived from p-dibromobenzene was insoluble in organic solvents except for m-cresol. Polyamides obtained from primary aliphatic diamines began to decompose at 210–250°C in air due to decomposition of the aliphatic chain.     

High-molecular-weight polyterephthalamide by direct polycondensation reaction in the presence of poly(ethylene oxide)

Polyterephthalamides of high molecular weight (η_inh up to 1.9) were obtained by the direct polycondensation reaction of terephthalic acid and aromatic diamines in the presence of poly(ethylene oxide) (PEO) with triphenyl phosphite in a N-methylpyrrolidone (NMP)–pyridine solution that contained lithium chloride. The molecular weights of the polymers produced varied with the amount and molecular weight of PEO, which showed maximum values when PEO with a molecular weight of 2.0 × 10⁴?5.0 × 10⁵ was used in a concentration of about 0.5 wt % in the solvent. The polycondensation reaction was significantly affected by the level of pyridine in a mixed solvent of NMP and pyridine and by the concentration of the lithium chloride added.     

Polymerization initiated by an electron donor–acceptor complex. Part I. Polymerization of methyl methacrylate initiated by liquid sulfur dioxide–pyridine complex in the presence of carbon tetrachloride

The polymerization of methyl methacrylate can be initiated by a charge-transfer complex of liquid sulfur dioxide and pyridine in the presence of carbon tetrachloride. The molar ratio of sulfur dioxide and pyridine which participated in the complex was found from a spectrophotometric study to be 2:1. The polymerization proceeds through free-radical intermediates. The overall rate of polymerization is proportional to the square root of the concentration of the complex, and the values of k_p/k_t^1/2 under the various polymerization conditions were satisfactorily consistent with the literature value. For the activation energy of the overall reaction, 8.2 kcal./mole was obtained, and for initiation, 9.7 kcal./mole was evaluated from the values of k_p/k_t^1/2. It was deduced from a kinetic mechanism for the initiation that a primary radical may be produced from the reduction of carbon tetrachloride by an associated complex consisting of liquid sulfur dioxide–pyridine complex and the monomer.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 5-t-butylisophthalic acid and various aromatic diamines

Aromatic polyamides (aramids) having pendant t-butyl group were synthesized by the direct polycondensation of 5-t-butylisophthalic acid with various aromatic diamines in N-methyl-2-pyrrolidone (NMP) using triphenyl phosphite and pyridine as condensing agents. The aramids having inherent viscosities of 0.6–2.4 dL/g were obtained in quantitative yields. These polymers were readily soluble in various solvents such as NMP,N,N-dimethylacetamide, dimethyl sulfoxide, and pyridine, and gave transparent, tough and flexible films by casting from the NMP solutions. The aramids had glass transition temperatures between 250 and 330°C, and started to lose weight around 350°C, with 10% weight loss being recorded at about 450°C in air.     

Addition of five‐membered cyclic carbonate with amine and its application to polymer synthesis

A bifunctional five‐membered cyclic carbonate was synthesized from carbon dioxide and diglycidyl terephthalate, and its polyaddition with alkyl diamines were carried out in DMF at room temperature to obtain the corresponding poly(hydroxyurethane)s with M_n s in the range of 6300–13200 in good yields. The structures of the obtained polymers were confirmed by IR and NMR spectroscopy and their glass‐transition and decomposition temperatures were observed at 3–29 °C and 182–277 °C, respectively. © 2000 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 38: 2375–2380, 2000     

Palladium-Catalyzed Addition of Carbon Monoxide and Carbon Tetrachloride to 1-Octene in Supercritical Carbon Dioxide

The Pd-catalyzed addition of carbon monoxide and carbon tetrachloride to 1-octene gave coadduct [alkyl 2-( 2, 2, 2-trichloroethyl)octanoate] as the major product in supercritical carbon dioxide by using pyridine as the base. It was found that the selectivity and the yield of coadduct were greatly affected by the pressure of carbon dioxide, the reaction temperature and the amounts of alcohol and base used.     

Effect of initiation conditions on the direct polycondensation reaction using triphenyl phosphite and pyridine

In a model reaction of terephthalic acid with aniline by using triphenyl phosphite in a mixed solvent of pyridine and N-methylpyrrolidone (NMP), mono- and dianilides were produced with relative yields varying with the content of pyridine in the solvent. The polycondensation of terephthalic acid with aromatic diamines was found to proceed more favorably via monoamidation, and highmolecular-weight polyterephthalamides were prepared by controlling initiation conditions (selective activation of carboxylic groups), such as initial solvent systems, including the amount and kind of pyridines and initiation temperatures.     

Polymer‐supported pyridinium catalysts for synthesis of cyclic carbonate by reaction of carbon dioxide and oxirane

Polymer‐supported pyridinium salts, prepared by quaternarization of crosslinked poly(4‐vinylpyridine) with alkyl halides, effectively catalyze the reaction of carbon dioxide (1 atm) and glycidyl phenyl ether (GPE) to afford the corresponding five‐membered cyclic carbonate (4‐phenoxymethyl‐1,3‐dioxolan‐2‐one). Poly(4‐vinylpyridine) quarternarized with alkyl bromides show high catalytic activities, and the reaction of carbon dioxide (1 atm) and GPE at 100 °C affords 4‐phenoxymethyl‐1,3‐dioxolan‐2‐one quantitatively in 6 h. The rate constant in the reaction of GPE and carbon dioxide in N‐methyl pyrrolidinone using poly(4‐vinylpyridine) quarternarized with n‐butyl bromide (k_obs = 102 min^?1) is almost comparable with those for homogeneous catalysts with good activities (e.g., LiI), and the rate of the reaction obeys the first‐order kinetics. A used catalyst may be recovered by centrifugation, and the recycled catalyst also promotes the reaction of GPE and carbon dioxide. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5673–5678, 2007     

Gold‐Catalyzed Ring Expansion of Alkynyl Heterocycles through 1,2‐Migration of an Endocyclic Carbon–Heteroatom Bond

A mild and efficient gold‐catalyzed oxidative ring‐expansion of a series of alkynyl heterocycles using pyridine‐N‐oxide as the oxidant has been developed, which affords highly valuable six‐ or seven‐membered heterocycles with wide functional group toleration. The reaction consists of a regioselective oxidation and a chemoselective migration of an endocyclic carbon–heteroatom bond (favored over C?H migration) with the order of migratory aptitude for carbon–heteroatom bonds being C?S>C?N>C?O. In the absence of an oxidant, polycyclic products are readily constructed through a ring‐expansion/Nazarov cyclization reaction sequence.     

Helicenes as All‐in‐One Organic Materials for Application in OLEDs: Synthesis and Diverse Applications of Carbo‐ and Aza[5]helical Diamines

A set of eight helical diamines were designed and synthesized to demonstrate their relevance as all‐in‐one materials for multifarious applications in organic light‐emitting diodes (OLEDs), that is, as hole‐transporting materials (HTMs), EMs, bifunctional hole transporting + emissive materials, and host materials. Azahelical diamines function very well as HTMs. Indeed, with high T_g values (127–214 °C), they are superior alternatives to popular N,N′‐di(1‐naphthyl)‐N,N′‐diphenyl‐(1,1′‐biphenyl)‐4,4′‐diamine (NPB). All the helical diamines exhibit emissive properties when employed in nondoped as well as doped devices, the performance characteristics being superior in the latter. One of the carbohelical diamines (CHTPA) serves the dual function of hole transport as well as emission in simple double‐layer devices; the efficiencies observed were better by quite some margin than those of other emissive helicenes reported. The twisting endows helical diamines with significantly high triplet energies such that they also function as host materials for red and green phosphors, that is, [Ir(btp)₂acac] (btp=2‐(2′‐benzothienyl)pyridine; acac=acetylacetonate) and [Ir(ppy)₃] (ppy=2‐phenylpyridine), respectively. The results of device fabrications demonstrate how helicity/ helical scaffold may be diligently exploited to create molecular systems for maneuvering diverse applications in OLEDs.     

Enzyme electrode for the determination of salicylate

Salicylate hydorxylase is used with a carbon dioxide sensor for the determination of salicylate in aqueous solution and pooled serum. The enzyme is physically entrapped with a dialysis membrance at the sensing tip of the carbon dioxide electrode. The enzyme catalyses the stoichiometric formation of catechol and carbon dioxide from salicylate and reduced pyridine nucleotide in the presence of flavin adenine dinucleotide as a specific cofactor. The carbon dioxide is detected by the sensor and related to the concentration of salicylate via a calibration curve. The method compares favorably with the spectrophotometric method for assay of salicylate. Although suitable for salicylate concentrations in the range of 5–300 μg ml^?1, its response below 5 μg ml^?1 is limited by the detection limit of the carbon dioxide sensor.     

Synthesis and properties of soluble aromatic polyimides from 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride and aromatic diamines

Aromatic tetracarboxylic dianhydride having crank and twisted noncoplanar structure, 2,2′-bis(3,4-dicarboxyphenoxy)-1,1′-binaphthyl dianhydride, was synthesized by the reaction of 4-nitrophthalonitrile with 2,2′-dihydroxy-1,1′-binaphthyl, followed by alkaline hydrolysis of the intermediate bis(ether dinitrile) and subsequent dehydration of the resulting bis(ether diacid). Binaphthyl-2,2′-diyl–containing novel aromatic polyimides having inherent viscosities up to 0.67 dL/g were obtained by the one-step polymerization process starting from the bis(ether anhydride) and various aromatic diamines. All the polyimides showed typical amorphous diffraction patterns. Most of the polyimides were readily soluble in common organic solvents such as N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), and pyridine. These aromatic polyimides had glass transition temperatures in the range of 280–350°C, depending on the nature of the diamine moiety. All polymers were stable up to 400°C, with 10% weight loss being recorded above 485°C in air. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 1937–1943, 1998     

Preparation and properties of aromatic polyamides and copolyamides from phenylindanedicarboxylic acid and aromatic diamines

Aromatic polyamides (aramids) having inherent viscosities of 0.5–1.10 dL/g were prepared by the direct polycondensation of 1,1,3-trimethyl-3-(4-carboxyphenyl)indane-5-carboxylic acid with various aromatic diamines using triphenyl phosphite and pyridine as the condensing agents. Copolyamides were also prepared by a similar procedure from a mixture of the phenylindane diacid, terephthalic acid, and p-phenylenediamine. Almost all of the aramids were soluble in a variety of solvents such as N-methyl-2-pyrrolidone, pyridine, and m-cresol, and afforded transparent and tough films by the solution casting. These aramids and copolyamides had glass transition temperatures in the range of 290–355°C, and started to lose weight at 340°C in air.     

Synthesis and properties of new poly(ether sulfone)amides

High molecular-weight aromatic polyamides were obtained from 1,5- and 2,6-bis-(4′-carboxy-4-phenylenoxy-sulfonyl)naphthalene by direct polycondensation reaction in N-methyl-2-pyrrolidone with various aromatic diamines, using triphenyl phosphite and pyridine as condensing agents. The polymers were characterized by elemental analysis, thermogravimetric analysis, differential scanning calorimetry, and infrared analysis. The polyamides, obtained in quantitative yield, possessed inherent viscosities in the range 0.42–1.70 dL/g, glass transition temperatures between 245–310°C, and 10% weight loss temperatures in nitrogen and air above 435 and 424°C, respectively. Most of the polymers were soluble in aprotic solvents. The effect of the structure on properties, such as solubility, T_g, and thermal behavior, were also studied. © 1996 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Diastereo‐ and Regioselective Addition of Thioamide Dianions to Imines and Aziridines: Synthesis of N‐Thioacyl‐1,2‐diamines and N‐Thioacyl‐1,3‐diamines

Addition reactions of thioamide dianions that were derived from N‐arylmethyl thioamides to imines and aziridines were carried out. The reactions of imines gave the addition products of N‐thioacyl‐1,2‐diamines in a highly diastereoselective manner in good‐to‐excellent yields. The diastereomeric purity of these N‐thioacyl‐1,2‐diamines could be enriched by simple recrystallization. The reduction of N‐thioacyl‐1,2‐diamines with LiAlH₄ gave their corresponding 1,2‐diamines in moderate‐to‐good yields with retention of their stereochemistry. The oxidative‐desulfurization/cyclization of an N‐thioacyl‐1,2‐diamine in CuCl₂/O₂ and I₂/pyridine systems gave the cyclized product in moderate yield and the trans isomer was obtained as the sole product. On the other hand, a similar cyclization reaction with antiformin (aq. NaClO) as an oxidant gave the cis isomer as the major product. The reactions of N‐tosylaziridines gave the addition products of N‐thioacyl‐1,3‐diamines with low diastereoselectivity but high regioselectivity and in good‐to‐excellent yields. The use of AlMe₃ as an additive improved the efficiency and regioselectivity of the reaction. The stereochemistry of the obtained products was determined by X‐ray diffraction.