Monoamine oxidase and succinate dehydrogenase inhibitory properties of substituted mercaptoquinazolones

Twelve 6-substituted-2-(1′-mercaptoacetyl-3′-arylurea)-3-phenyl-4-quinazolones were synthesized by condensation of 6-substituted anthranilic acids and aryl isothiocyanates followed by reaction with chloroacetyl arylurea. These compounds were characterized by their sharp melting points and elemental analyses. All compounds were evaluated for their enzyme inhibitory activity. It was found that all substituted quinazolones at a final concentration of 2 × 10^?4 M inhibited in vitro monoamine oxidase and succinate dehydrogenase activity of rat brain homogenates and the degree of inhibition ranged from 11–77% and 25–53%, respectively.     

Synthesis and biological activities of substituted dihydrobenzo[h]-pyrimido[4,5-b]quinolines as tetracyclic 5-deaza nonclassical folates

Novel tetracyclic compounds 1–4 have been synthesized via a regiospecific cyclocondensation reaction between substituted 6-aminopyrimidines 5– 7 and chlorovinyl aldehydes 13 and 14 . The linear structures of these compounds were established by ¹H nmr and ¹³C nmr spectral data and also by synthesis of the compounds via an unambiguous route. The growth of Manca human lymphoma cells was inhibited 50% by 1 and 4 at 4.5 × 10^?6 M and 1.2 × 10^?6 M respectively. These compounds also inhibited human dihydrofolate reductase (DHFR)by 50% at 4.4 × 10^?6 M and 1.4 × 10^?6 irrespectively and L. casei DHFR at 1.9 × 10^?5 M and 1.1 × 10^?5 M respectively. Compound 16 , a positional isomer of 1 , was the most potent of the compounds studied, it inhibited the growth of Manca human lymphoma cells by 50% at 9 × 10^?8 M. The IC₅₀ values of 16 for the inhibition of human DHFR and L. casei DHFR were 8 × 10^?8 M and 1.9 × 10^?5 M respectively.     

Sol‐Gel‐Derived Biosensor Based on Plant Tissue: The Inhibitory Effect of Atrazine on Polyphenol Oxidase Activity for Determination of Atrazine

This work presents a sol‐gel based biosensor for atrazine determination which has been obtained by introducing the enzyme polyphenol oxidase from apple tissue in a sol‐gel matrix. Apple tissue acts as a molecular recognition element. Atrazine is an inactive compound electrochemically; redox coupling of dopamine was used for studying atrazine behavior. Atrazine was determined by monitoring the inhibition power of polyphenol oxidase activity. The measurements were performed in 0.1 M KH₂PO₄‐NaOH buffer (pH 7.5). The effect of various experimental parameters such as pH, concentration of buffer, concentration of dopamine, incubation time and matrix composition has been investigated for optimum analytical performance. The biosensor consisted of 10.3% (w/w) of apple tissue. The bioelectrode exhibits a linear response for dopamine and atrazine concentrations in the range of 5.66 × 10^?6?2.27 × 10^?3M and 1 × 10^?5 ?1 × 10^?4 M with a detection limit of 4.2 × 10^?6 and 5.5 × 10^?6 M, respectively. A correlation coefficient of 0.9945 and a relative standard deviation (R.S.D.) of 3.29% for dopamine, 0.9944 and 3.69% for a trazine were achieved.     

Reactivity of selected volatile organic compounds (VOCs) toward the sulfate radical (SO4−)

Rate constants for a series of alcohols, ethers, and esters toward the sulfate radical (SO₄^?) have been directly determined using a laser photolysis set‐up in which the radical was produced by the photodissociation of peroxodisulfate anions. The sulfate radical concentration was monitored by following its optical absorption by means of time resolved spectroscopy techniques. At room temperature the following rate constants were derived: methanol ((1.6 ± 0.2) × 10⁷ M^?1 s^?1); ethanol ((7.8 ± 1.2) × 10⁷ M^?1 s^?1); tert‐butanol ((8.9 ± 0.3) × 10⁵ M^?1 s^?1); diethyl ether ((1.8 ± 0.1) × 10⁸ M^?1 s^?1); MTBE ((3.13 ± 0.02) × 10⁷ M^?1 s^?1); tetrahydrofuran (THF) ((2.3 ± 0.2) × 10⁸ M^?1 s^?1); hydrated formaldehyde ((1.4 ± 0.2) × 10⁷ M^?1 s^?1); hydrated glyoxal ((2.4 ± 0.2) × 10⁷ M^?1 s^?1); dimethyl malonate (CH₃OC(O)CH₂C(O)OCH₃) ((1.28 ± 0.02) × 10⁶ M^?1 s^?1); and dimethyl succinate (CH₃OC(O)CH₂CH₂C(O)OCH₃) ((1.37 ± 0.08) × 10⁶ M^?1 s^?1) where the errors represent 2σ. For the two latter species, we also measured the temperature dependence of the corresponding rate constants. A correlation of these kinetics with the bond dissociation energy is also presented and discussed. © 2001 John Wiley & Sons, Inc. Int J Chem Kinet 33: 539–547, 2001     

Properties of bacterial luciferase/NADH : FMN oxidoreductase and firefly luciferase immobilized onto sepharose

NADH : FMN oxidoreductase and bacterial luciferase have been efficiently coimmobilized onto Sepharose 4B. This luminescent immobilized enzyme system can be used to assay NADH. The assay is rapid and sensitive with a lower limit of detection of 0.2 pmol/assay tube. The intra-assay precision was 3.5% at 2 × 10^-5 M and 5.8% at 2 × 10^-6 M NADH. Light intensity was proportional to NADH concentration from 0.2 to 1000 pmol. Added serum and certain dehydrogenases were found to be inhibitory; however, inhibition could be eliminated by a combination of heat treatment and dilution. Firefly luciferase has also been immobilized onto both Sepharose 4B and CL 6B. The detection limit for ATP using this immobilized enzyme was 0.2 pmol and the assay was linear from 0.2 to 2000 pmol. The intra-assay precision was 4.8% at 2 × 10^-4 M and 3.2% at 1 × 10^-5 M ATP. The immobilized enzymes remained fully active when rapidly frozen in the presence of glycerol and DTT. Such preparations could be stored for at least two months with no loss of activity. A variety of different compounds were used to block any remaining reactive groups on the Sepharose following immobilization of the enzymes. Glycine, 2-aminoethanol, and ethylenediamine were examined. The preparations where ethylenediamine was used as a blocking agent exhibited better activity and stability than the others.     

Polymerization of acrylamide initiated by the persulfate–thiosulfate redox couple

Conversion–time data were obtained for the polymerization of acrylamide initiated by the redox couple persulfate–thiosulfate by using a dilatometer. A plot of initial rate as a function of thiosulfate concentration shows a well-defined maximum and three distinct regions of behavior. In each region the shape of the conversion–time curves demonstrates the differences in apparent order with respect to monomer arising from changes in initiator concentration during an individual run. A reaction mechanism is proposed to explain the results, and a limiting form of the rate expression is derived for each of the three regions. The ranges of concentration studied are: persulfate, 9.5 × 10^?4?4.7 × 10^?2M; thiosulfate, 2 × 10^?5?2 × 10^?2M; initial monomer, 0.05–1.0M; and temperature, 30–50°C. Within these ranges the initial rate shows a halforder dependence on persulfate and a first-order dependence on initial monomer concentration.     

Synthesis of 1-(N-piperidinoacetyl)-4-arylthiosemicarbazides as possible anticonvulsants

Several 1-(N-piperidinoacetyl)-4-arylthiosemicarbazides were synthesized from N-piperidinoacetyl hydrazide, which was obtained by the reaction of hydrazine hydrate with ethyl N-piperidinoacetate. The anticonvulsant activity of these substituted thiosemicarbazides was reflected by their ability to provide 10–50% protection against pentylenetetrazol-induced convulsions in mice. All substituted thiosemicarbazides (0.3 mM) inhibited in vitro monoamine oxidase activity of rat brain homogenates and provided 21–86% protection against hypoosmotic hemolysis at a final concentration of 0.1 mM.     

Synthesis of l-(N-acelylpiperidino)-4-aryl semicarbazides as possible anticonvulsants

Six 1-(N-acetylpiperidino)-4-aryl semicarbazides were synthesized from ethyl-N-piperidino-aeetatc which on treatment with hydrazine hydrate was converted into N-piperidinoacethydrazide. The resulting hydrazide on treatment with the appropriate arylisoeyanales formed l -(N-acelyl-piperidino)-4-aryl semicarbazides. Amongst these piperidinosemicarbazides, three compound possessed low anticonvulsanl activity and provided 20-40% protection against pentylenetetrazol-induced convulsions in mice. All piperidino semicarbazides (0.1 mM) possessed antihemolytic activity (13-35%) and caused 40-72% inhibition of monoamine oxidase activity of rat brain homogenates at a final concentration of 0.3 mM.     

Chitosan‐Based Glucose Oxidase Electrodes Enhanced by Silver Nanoparticles

Silver nanoparticles enhanced glucose oxidase electrodes were prepared on the basis of chitosan matrix. The enzyme electrodes exhibited high sensitivity and excellent response performance to glucose with a linear range from 1×10^?6 to 8×10^?3 mol · L^?1. And the time reaching the steady‐state amperometric response was less than 5 seconds. The inhibition percentage of this enzyme electrode against copper ions concentration was linear ranging from 1.2×10^?6 to 5×10^?5 mol · L^?1. These properties of enzyme electrodes are probably due to the excellent electron transfer of silver nanoparticles and the orientation of glucose oxidase molecule.     

An amperometric monoamine oxidase biosensor for determining some antidepressants

An amperometric biosensor based on a platinum screen-printed electrode and immobilized monoamine oxidase is developed to determine antidepressants of different classes. Petylyl, pyrazidol, and flu-oxetine can be determined with determination limits of 8 × 10^?9, 8 × 10^?7, and 8 × 10^?10 M, respectively. A procedure is proposed for determining fluoxetine in tablets. It is shown that petylyl can be selectively determined by an immunochemical technique using the developed biosensor and immobilized antibodies in the concentration range from 1 × 10^?4 to 1 × 10^?8 M.     

Polymerization of acrylonitrile: Kinetics of the reaction initiated by the Fe2+/BrO3− redox system

The aqueous polymerization of acrylonitrile initiated by the bromate—ferrous redox system in aqueous sulfuric acid was studied under nitrogen atmosphere. The rate of polymerization increased with increasing concentration of ferrous in the range of 0.25-1 × 10^?2M. The percentage of conversion increased with increasing concentration of the catalyst, but beyond 2.5 × 10^?3M there was a decreasing trend in the rate of polymerization. The rate varied linearly with [monomer]. The initial rate of polymerization as well as the maximum conversion increased within the range of 1–2.5 × 10^?3M KBrO₃, but beyond 2.5 × 10^?3M the rate of polymerization decreased. The initial rate and limiting conversion increased with increasing polymerization temperature in the range 30–40°C; beyond 40°C they decreased. The effect of certain neutral salts, water-miscible solvents, complexing agents, and copper sulfate concentration on the rate of polymerization was investigated.     

Development of a Novel Silver Nanoparticles-Enhanced Screen-Printed Amperometric Glucose Biosensor

Abstract

A disposable glucose biosensor is developed by immobilizing glucose oxidase into silver nanoparticles-doped silica sol-gel and polyvinyl alcohol hybrid film on a Prussian blue-modified screen-printed electrode. The silver nanoparticles-enhanced biosensor shows a linear amperometric response to glucose from 1.25 × 10^?5 to 2.56 × 10^?3 with a sensitivity of 20.09 mA M^?1 cm^?2, which is almost double that of the biosensors without silver nanoparticles. The immobilized glucose oxidase retained 91% of its original activity after 30 days of storage in phosphate buffer (pH 6.9; 0.1 M) at 4°C. Blood glucose in a rabbit serum sample was successfully measured with the biosensor.     

Anticonvulsant activity and succinate dehydrogenase inhibitory property of new substituted thiobarbiturates

Eight 1-aryl-3-(2-pyridyl)thiobarbiturates were synthesized and evaluated for their anticonvulsant property and their ability to inhibit succinate dehydrogenase activity of rat brain homogenates. These substituted thiobarbiturates (100 mg./kg., i.p.) provided 20–60% protection against pentylenetetrazol-induced convulsions in albino mice. Low toxicity of these compounds was reflected by their high approximate LD₅₀ values which were found to range from 500–1000 mg./kg. All substituted thiobarbiturates (ImM) inhibited in vitro succinate dehydrogenase activity and the degree of inhibition ranged from 10–72%.     

The electrochemical stripping determination of tin in aqueous and nonaqueous media after its extraction

The anodic stripping voltammetric and chronopotentiometric determination of tin(IV) in aqueous and nonaqueous medium after its extraction using the rotating disc electrode made of glassy carbon with the mercury film was studied. The optimum composition of nonaqueous medium for the determination of tin is 0.2 M NaBr+5×10^?5M Hg²⁺ in 20 ml of the extract +30 ml of methanol. Tin(IV) was determined by anodic stripping voltammetry or chronopotentiometry down to the concentration 10^?7M. The selective determination of tin was studied. 10^?6M of tin(IV) was determined with an error ±4–5% even in the presence of metals: Co²⁺, Ni²⁺, Cd²⁺, Zn²⁺ (5×10^?3M), Ag⁺ and Pb²⁺ (5×10^?4M), Cu²⁺ (1.5×10^?4M), Sb³⁺ and Bi³⁺ (5×10^?5M).     

Magnesium chloride supported high mileage catalysts for olefin (decene-l) polymerization XIV. Propagation and chain transfer

Decene-l was polymerized with the MgCl₂/ethylebenzoate/p-cresol/AIEt₃/TiCl₄-AlEt₃/methyl-p-toluate catalyst at 50° using an A/T ratio of 167 and a range of monomer concentration. The concentration of the two kinds of active sites are [Ti] = 12% and [Ti] = 4% of the total titanium. The rate constants of propagation are 24 M^?1 s^?1. Chain transfers to AIEt₃, monomer, and by β-hydride elimination have rate constant values of 1.7 × 10^?3 M^?1 s^?1, 1.34 × 10^?2 M^?1 s^?1, and 1.7 × 10^?2 s^?1, respectively. Poly(decene-l) have relatively narrow MW which are unchanged during the course of a polymerization. Therefore, the active site concentrations in the CW catalyst for propylene and decene polymerization are identical and their rate constant values agree within a factor of 2. However, the rate of decene polymerization depends on fractional order of monomer concentration and decreases with the increase of activator concentration. Furthermore, the formation of metal polymer bonds has a rate independent of these concentrations. These kinetic behaviors are a manifestation of absorption processes of these species which are not seen in propylene polymerizations.     

Electrocatalytic Oxidation of Sulfite on a Cobalt Pentacyanonitrosylferrate Film Modified Glassy Carbon Electrode

The electrocatalytic oxidation of sulfite has been studied on the cobalt pentacyanonitrosylferrate modified glassy carbon electrode (CoPCNF). The CoPCNF films on the glassy carbon electrodes show an excellent electrocatalytic activity toward the oxidation of sulfite in 0.5 M KNO₃. The kinetics of the catalytic reaction was investigated by using cyclic voltammetry, rotating disk electrode (RDE) voltammetry and chronoamperometry. The average value of the rate constant, K, for the catalytic reaction and the diffusion coefficient, D, were evaluated by different approaches for sulfite and found to be 2.9×10² M^?1s^?1 and 4.6×10^?6 cm²s^?1, respectively. At a fixed potential under hydrodynamic conditions (stirred solutions), the oxidation current is proportional to the sulfite concentration and the calibration plot was linear over the concentration range 5×10^?6–1×10^?4 M. The detection limit of the method is 3×10^?6 M., low enough for the trace sulfite determination.     

The relaxation spectra of nickel(II) and cobalt(II) arginine complexes

The temperature-jump method has been used to determine the nickel(II)- and cobalt(II)-arginine complexation kinetics. In the pH range studied, the neutral form of the ligand, HL, is the attacking, as well as the complexed, ligand species. The reactions reported on are of the type where n = 1, 2, 3 and M is Ni or Co. At 25° and ionic strength 0.1M the association rate constants are: for nickel(II) k₁ = 2.3 × 10³(±20%), k₂ = 2.4 × 10⁴(±20%), k₃ = 3.5 × 10⁴(±40%) M^?1 sec^?1; for cobalt(II) k₁ = 1.5 × 10⁵(±20%), k₂ = 8.7 × 10⁵(±20%), k₃ = 2.0 × 10⁵(±40%) M^?1 sec^?1. Arginine binds to metal ions less well than homologous chelating agents due to the electrostatic repulsion arising from the positively charged terminus of the zwitterion. Kinetically, the effect appears in the association rate constants with nickel reactions more strongly influenced than cobalt.     

Syndiospecific polymerization of styrene. II. Monocyclopentadienyltributoxy titanium/methylaluminoxane catalyst

Syndiospecific polymerization of styrene was catalyzed by monocyclopentadienyltributoxy titanium/methylaluminoxane [CpTi (OBu)₃/MAO]. The atactic and syndiotactic polystyrenes were separated by extracting the former with refluxing 2-butanone. The activity and syndiospecificity of the catalyst were affected by changes in catalyst concentration and composition, polymerization temperature, and monomer concentration. Extremely high activity of 5 × 10⁷ g PS (mol Ti mol S h)^?1 with 99% yield of the syndiotactic product were achieved. The concentration of active species, [C^*], has been determined by radiolabeling. The amount of the syndiospecific and nonspecific catalytic species, [C] and [C] respectively, correspond to 79 and 13% of the CpTi(OBu)₃. The rate constants of propagation for C and C at 45°C are 10.8 and 2.0 (M s)^?1, respectively, the corresponding rate constants for chain transfer to MAO are 6.2 × 10^?4 and 4.3 × 10^?4s^?1. There was no deactivation of the catalytic species during a batch polymerization. The rate constant of chain transfer with monomer is 6.7 × 10^?2 (M s)^?1; the spontaneous β-hydride transfer rate constant is 4.7 × 10^?2 s^?1. The polymerization activity and stereospecificity of the catalyst are highest at 45°C, both decreasing with either higher or lower temperature. The stereoregular polymer have broad MW distributions, M?_w/M?_n = 2.8–5.7, and up to three crystalline modifications. The T_m of the s-PS polymerized at 0–90°C decreased from 261.8 to 241°C indicating thermally activated monomer insertion errors. The styrene polymerization behaviors were essentially insensitive to the dielectric constant of the medium.     

Kinetics and mechanism of photochemical reactions of peroxomonosulfate in the presence and absence of 2-propanol

The photochemical decomposition of peroxomonosulfate (PMS) in the presence and absence of 2-propanol at 25°C was found to obey an overall first-order rate – d[PMS]/dt = k_?[PMS]. In the absence of 2-propanol, the quantum yield ≤ for the decomposition of PMS was found to depend upon the concentration of PMS at [PMS] > 2 × 10^?M, and is independent of concentration at [PMS] > 2 × 10^?2M. The quantum yield in the presence of 2-propanol was found to be 3.03 at [PMS] = 1 × 10^?2M and 4.45 at higher concentrations of PMS. In the pH range of 2–9.0 the quantum yield was found to be independent of pH, and the overall rate constant k_? was found to be 6.49 × 10^?3 s^?1 and 1.68 × 10^?3 s^?1, respectively, in the presence and absence of isopropanol. A suitable chain mechanism is proposed and explained.     

Equilibrium,kinetics, and mechanism of the malonic acid–iodine reaction

The equilibrium constant for the reaction CH₂(COOH)₂ + I₃^? ? CHI(COOH)₂ + 2I^? + H⁺, measured spectrophotometrically at 25°C and ionic strength 1.00M (NaClO₄), is (2.79 ± 0.48) × 10^?4M². Stopped-flow kinetic measurements at 25°C and ionic strength 1.00M with [H⁺] = (2.09-95.0) × 10^?3M and [I^?] = (1.23-26.1) × 10^?3M indicate that the rate of the forward reaction is given by (k₁[I₂] + k₃[I₃^?]) [HOOCCH₂COO^?] + (k₂[I₂] + k₄[I₃^?]) [CH(COOH)₂] + k₅[H⁺] [I₃^?] [CH₂(COOH)₂]. The values of the rate constants k₁-k₅ are (1.21 ± 0.31) × 10², (2.41 ± 0.15) × 10¹, (1.16 ± 0.33) × 10¹, (8.7 ± 4.5) × 10^?1M^?1·sec^?1, and (3.20 ± 0.56) × 10¹M^?2·sec^?1, respectively. The rate of enolization of malonic acid, measured by the bromine scavenging technique, is given by k_en[CH₂(COOH)₂], with k_en = 2.0 × 10^?3 + 1.0 × 10^?2 [CH₂(COOH)₂]. An intramolecular mechanism, featuring a six-member cyclic transition state, is postulated to account for the results on the enolization of malonic acid. The reactions of the enol, enolate ion, and protonated enol with iodine and/or triodide ion are proposed to account for the various rate terms.