Phonon spectra and structure of crystalline ethylene oxide and ethylene sulphide at 77 k

Vibrational spectra of solid ethylene oxide and ethylene sulphide were measured at 77 K. The analysis of the exciton splitting components was carried out using infrared polarized radiation. By comparing the amount of frequency separation in the IR and in the Raman spectra and the difference in the frequency values in these two spectra, an assignment is proposed which obeys the selection rules of a C_{2 h} centrosymmetric factor group for both molecules.     

Structure of liquid ethylene glycol

The structure of liquid ethylene glycol (EG) was studied by the vibrational spectroscopy and isothermal compressibility techniques. Raman spectra were recorded at 296 K, IR spectra were measured at 296 and 90 K, and the isothermal compressibility was measured over a pressure range of 0.1–300 MPa. The results obtained were compared with analogous data for water. The structure of liquid EG is discussed using the available literature data on the conformation of its molecule in the gas phase and X-ray diffraction data for crystalline EG. It was concluded that liquid EG has a three-dimensional network of hydrogen bonds, which is more uniform and less mobile compared to water, a feature that explains why the viscosity of EG is high.     

Raman spectra from ethylene and deuterated ethylene chemisorbed on a silica-supported nickel catalyst

The Raman spectra of ethylene and deuterated ethylene chemisorbed on silica-supported nickel have been measured in the frequency range 50–3400 cm^?1. At room temperature, a Raman spectrum is observed which corresponds to ethylene chemisorbed under dehydrogenation and it is rather similar to the spectrum of chemisorbed acetylene. For a comparison therefore, the Raman spectra of acetylene and deuterated acetylene were also measured. In addition, the vibrational spectrum of chemisorbed benzene was recorded. At temperatures T ? 200 K, ethylene is found to be associatively chemisorbed without dehydrogenation.The vibrations observed are described in the approximation of a surface molecule with covalent bonding to two or three surface nickel atoms. The symmetry seems to be slightly distorted C_2v or C_s. The vibrational spectrum is discussed with respect to a metal- surface selection rule. In order to improve the reliability of the assignments for localized vibrational modes, a normal coordinate analysis and a force constant calculation have been done for chemisorbed acetylene.     

On the stability of the hydrogen chloride complexes with ethylene and acetylene. A high resolution gas phase and ab initio study

The temperature dependencies of the intensities of the HCl stretching bands of the hydrogen chloride complexes with acetylene and ethylene have been used to obtain estimates of the dissociation enthalpies of the two complexes. Quantum chemical calculations on the Hartree Fock and DFT/B3LYP levels of theory have been combined with experimental data to give estimates of the intensities of the HCl stretching vibration in the two complexes.     

Study of stress-induced changes in poly(ethylene terephthalate) through Fourier transform infrared spectroscopy

The molecular level changes resulting from an external stress applied onto a highly uniaxially oriented poly(ethylene terephthalate) film has been studied. For this purpose, a new technique - Fourier Transform Infrared Spectroscopy - has been employed. Stress-induced differences are visible in a number of bands within the IR spectra of stressed PETP films. From the assignments of these IR bands, it is inferred how external stresses applied on the polymer films are actually transmitted to the molecular level. The intermicrofibrillar chains are the first to be stressed followed by stress transmission on the crystalline regions. These stresses are also responsible for stretching the backbone bonds, for transforming gauche conformations (predominantly present in the amorphous regions) of the ethylene glycol linkages to the trans, and for modifying the interchain interactions.     

The structures of vanadium oxide cluster-ethene complexes. A combined IR multiple photon dissociation spectroscopy and DFT calculation study

Infrared spectra of complexes of small vanadium oxide clusters with ethene are determined using infrared multiple photon dissociation (IR-MPD) spectroscopy in the range of 550-1850 cm-1. The structures of the complexes have been identified by comparison of the experimental spectra with the harmonic vibrational frequencies and corresponding IR intensities of possible isomers calculated with DFT methods. We find that the ethene molecule binds directly to a vanadium atom in the cluster, although this it is not in all cases the most stable arrangement.     

Functional polymers. XLIX. Copolymerization of ω-alkenoates with α-olefins and ethylene

The 2,6-dimethylphenyl ester of 10-undecenoic acid was copolymerized with 1-dodecene, 1-octene, 1-hexene, propylene, and ethylene using coordination initiation systems based on “aluminum-activated” titanium trichloride and dialkylaluminum chlorides. The copolymerizations with higher α-olefins proceeded smoothly and gave copolymers incorporating from 60 to 90% of the 10-undecenoate feed. Copolymerization with propylene gave incorporation of 5 mol % of 2,6-dimethylphenyl 10-undecenoate; with ethylene only 3 mol % of the ω-alkenoate was readily incorporated. All copolymers were characterized by elemental analysis, dilute solution viscosity, and by their IR ¹H- and ¹³C-NMR spectra.     

Vibrational spectra and noncovalent interactions of carbohydrates molecules

The differences between the vibrational spectra of carbohydrates of the same chemical structure caused by the noncovalent intra- and intermolecular interactions have been systematized. In the general case, these differences show up as the following specific features of changes in the bond intensities: change in the intensity ratio of closely spaced bands (IR and Raman spectra); selective change (increase, decrease) in intensities of individual bands (IR and Raman spectra); change (increase, decrease) in intensities of practically all bands (IR and Raman spectra); appearance of strong bands in the region of low frequencies from 50 to 200 cm⁻¹ (Raman spectra); appearance of strong diffuse bands in the low-frequency range with a simultaneous great reduction in the other bands (practical disappearance of the majority of bands) (Raman Spectra). The causes of such a kind of changes in the band intensities in the vibrational spectra of carbohydrates are discussed.     

Regularity modes in Raman spectra of polyolefins: Part II. Polyethylene and ethylene copolymers

In this work, the thermal behavior of the regularity modes in Raman spectra of polyethylene with different densities and random ethylene/1-hexene copolymers with varying content of comonomer are studied. We demonstrate especially that the vibrational modes at 1062 and 2850 cm^↙1 are related to a critical sequence length of trans-conformers of 6⬜8 CH₂ groups, while the modes at 1130, 1170, 1295, and 2883 cm^↙1 indicate a critical sequence length of trans-conformers of 18 CH₂ groups. Upon increasing the 1-hexene content in the ethylene/1-hexene copolymers, the evolution of the intensities of the Raman modes at 1062, 1130, 1170, 1295, and 1417 cm^↙1, normalized to the intensity of the band at 2850 cm^↙1, is similar to the evolution of the intensities of the same modes in the Raman spectra of low density polyethylene at increasing temperature. This observation however contrasts with that in the Raman spectra of polyethylenes with middle and high densities. We suppose that these results can be explained by similarities in the structure of non-crystalline areas of low density polyethylene and the ethylene/1-hexene copolymers, which contain significant amounts of short sequences of trans-conformers.     

Calculations on the auger spectra of ethylene and acetylene

The Auger spectra of ethylene and acetylene have been calculated by a method including electron correlation at the ab initio level. Explicit assignments are given for both spectra. The results show that correlation effects leading to a breakdown of the two-hole picture for the final states of the Auger process are important in most parts of the spectra.     

Anisotropic molecular structure in dip-coated films of linear poly(ethylene imine) studied by infrared multiple-angle incidence resolution spectrometry

Molecular structure in dip-coated films of linear poly(ethylene imine) (LPEI) on a germanium (Ge) substrate in dried and hydrated conditions have been analyzed by infrared multiple-angle incidence resolution spectrometry (IR MAIRS). The MAIRS-IP (in-plane) and -OP (out-of-plane) spectra of the dried film exhibited largely different patterns from each other, which indicated that LPEI molecules had an apparent molecular orientation with respect to the substrate surface. Although the film exhibited no peak in X-ray diffraction patterns, the low-crystallinity film has been found to have highly oriented molecular structure. Many key bands indicated that the molecules were involved in the double-stranded helix structure, which is specific to the anhydrate crystal of LPEI, with nearly perpendicular orientation. The Davydov splitting of the NH stretching vibration mode was readily captured by the IR MAIRS spectra, which also supported the helix standing model. When the film was stored in a humid condition, on the other hand, IR MAIRS spectra revealed that the helix was resolved to be straight chains, but the perpendicular orientation was kept unchanged. In addition, the MAIRS spectra also revealed molecular orientation of the water molecules of crystallization. The unique molecular arrangements are understandable by considering that the stabilization energy in the polymer monolayer directly attached on the substrate surface is minimized by the standing-molecule arrangements.     

Revised vibrational band assignments for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile based on ab initio, DFT and normal coordinate calculations

In the present study, a systematic vibrational spectroscopic investigation for the experimental IR and Raman spectra of 2,3,4-trifluorobenzonitrile (TFB), aided by electronic structure calculations has been carried out. The electronic structure calculations – ab initio (RHF) and hybrid density functional methods (B3LYP) – have been performed with 6-31G* basis set. Molecular equilibrium geometries, electronic energies, IR intensities, harmonic vibrational frequencies, depolarization ratios and Raman activities have been computed. The results of the calculations have been used to simulate IR and Raman spectra for TFB that showed excellent agreement with the observed spectra. Potential energy distribution (PED) and normal mode analysis have also been performed. The assignments proposed based on the experimental IR and Raman spectra have been reviewed. A complete assignment of the observed spectra has been proposed.     

In situ ATR-FTIR Spectroscopy of Poly(ethylene terephthalate) Subjected to High-Temperature Methanol

Summary: In situ ATR-FTIR (attenuated total reflection Fourier transform infrared) spectroscopy combined with a high-pressure cell has been applied to measure IR spectra of polymers subjected to superheated or near-critical methanol (100– 200 °C). Spectra of poly(ethylene terephthalate) (PET) have been measured under exposure to high temperature methanol using this ATR-FTIR approach to understand at a molecular level the recycling process of PET. The evolution of the structure and the morphology of the polymer has been studied during the methanolysis. The quantity of trans PET conformer is generally used as a tracer of the crystallinity of PET. During depolymerisation of PET the evolution of crystallinity and of trans conformer appears to be different. The dependence of the rate constant on reaction temperature was correlated by Arrhenius plot, which shows activation energy of 5.8 kJ/mol.     

Quantum chemical calculation of cation interaction with water molecules and ethylene glycol

A computer modeling is carried out for the structure and IR spectra of ethylene glycol-9 water molecules and ethylene glycol-9 water molecules-M⁺ systems, where M⁺ = Na⁺, K⁺. The presence of cations changes the structure of the glycol hydrate shell, which leads to a decrease in the activation energy of glycol self-diffusion in the solution with the addition of salts in comparison with its value in the water-glycol solution.     

Vibrational spectra and natural bond orbital analysis of the herbicidal molecule 2(4-chlorophenoxy)-2-methyl propionic acid

The herbicide 2(4-chlorophenoxy)-2-methyl propionic acid (MCPP) has been subjected to NIR FT-Raman and infrared spectral studies. The optimized molecular structure, vibrational wavenumbers, IR intensities and Raman activities have been calculated by using density functional method (B3LYP) with the standard 6-31G(d) basis set. The calculated molecular geometry has been compared with the XRD data. The detailed assignments of the normal modes have been performed based on the potential energy distribution (PED) following the scaled quantum mechanical force field (SQMFF) methodology. The IR and Raman spectra have been plotted for the calculated wavenumbers. The simulated spectra satisfactorily coincide with the experimental spectra. The strong hyperconjugative interaction and charge delocalization that leads to the stability of the molecule have been investigated with the aid of natural bond orbital (NBO) analysis.     

FT-IR and FT-Raman spectroscopic investigation, computed vibrational frequency analysis and IR intensity and Raman activity peak resemblance analysis on 2-nitroanisole using HF and DFT (B3LYP and B3PW91) calculations

Fourier-transform Raman and infrared spectra of 2-nitroanisole are recorded (4000-100 cm(-1)) and interpreted by comparison with respective theoretical spectra calculated using HF and DFT method. The geometrical parameters with C(S) symmetry, harmonic vibrational frequencies, infrared and Raman scattering intensities are determined using HF/6-311++G (d, p), B3LYP/6-311+G (d, p), B3LYP/6-311++G (d, p) and B3PW91/6-311++G (d, p) level of theories. A detailed vibrational spectral analysis has been carried out and assignments of the observed fundamental bands have been proposed on the basis of peak positions and relative intensities. The results of the calculations have been used to simulate IR and Raman spectra for the molecule that showed good agreement with the observed spectra. The SQM method, which implies multiple scaling of the DFT force fields has been shown superior to the uniform scaling approach. The vibrational frequencies and the infrared intensities of the C-H modes involved in back-donation and conjugation are also investigated.     

First-principle DFT and MP2 modeling of infrared reflection-absorption spectra of oriented helical ethylene glycol oligomers

First-principle modeling is used to obtain a comprehensive understanding of infrared reflection absorption (RA) spectra of helical oligo(ethylene glycol) (OEG) containing self-assembled monolayers (SAMs). Highly ordered SAMs of methyl-terminated 1-thiaoligo(ethylene glycols) [HS(CH2CH2O)(n)CH3, n = 5, 6] on gold recently became accessible for systematic infrared analyses [Vanderah et al., Langmuir, 2003, 19, 3752]. We utilized the quoted experimental data to validate the first-principle modeling of infrared RA spectra of HS(CH2CH2O)(5,6)CH3 obtained by (i) DFT methods with gradient corrections (using different basis sets, including 6-311++G) and (ii) HF method followed by a M?ller-Plesset (MP2) correlation energy correction. In focus are fundamental modes in the fingerprint and CH-stretching regions. The frequencies and relative intensities in the calculated spectra for a single molecule are unambiguously identified with the bands observed in the experimental RA spectra of the corresponding SAMs. In addition to confirming our earlier assignment of the dominating peak in the CH-stretching region to CH2 asymmetric stretching vibrations, all other spectral features observed in that region have received an interpretation consistent (but not in all cases coinciding) with previous investigations. The obtained results provide an improved understanding of the orientation and conformation of the molecular building blocks within OEG-containing assemblies, which, in our opinion, is crucial for being able to predict the folding and phase characteristics and interaction of OEG-SAMs with water and proteins.     

Modeling random methyl branching in ethylene/ propylene copolymers using metathesis chemistry: synthesis and thermal behavior

The structure of random ethylene/propylene (EP) copolymers has been modeled using step polymerization chemistry. Six ethylene/propylene model copolymers have been prepared via acyclic diene metathesis (ADMET) polymerization and characterized for primary and higher level structure using in-depth NMR, IR, DSC, WAXD, and GPC analysis. These copolymers possess 1.5, 7.1, 13.6, 25.0, 43.3, and 55.6 methyl branches per 1000 carbons. Examination of these macromolecules by IR and WAXD analysis has demonstrated the first hexagonal phase in EP copolymers containing high ethylene content (90%) without the influence of sample manipulation (temperature, pressure, or radiation). Thermal behavior studies have shown that the melting point and heat of fusion decrease as the branch content increases. Further, comparisons have been made between these random ADMET EP copolymers, random EP copolymers made by typical chain addition techniques, and precisely branched ADMET EP copolymers.     

Rhodium complex with ethylene ligands supported on highly dehydroxylated MgO: synthesis, characterization, and reactivity

Mononuclear rhodium complexes with reactive olefin ligands, supported on MgO powder, were synthesized by chemisorption of Rh(C(2)H(4))(2)(C(5)H(7)O(2)) and characterized by infrared (IR), (13)C MAS NMR, and extended X-ray absorption fine structure (EXAFS) spectroscopies. IR spectra show that the precursor adsorbed on MgO with dissociation of acetylacetonate ligand from rhodium, with the ethylene ligands remaining bound to the rhodium, as confirmed by the NMR spectra. EXAFS spectra give no evidence of Rh-Rh contributions, indicating that site-isolated mononuclear rhodium species formed on the support. The EXAFS data also show that the mononuclear complex was bonded to the support by two Rh-O bonds, at a distance of 2.18 A, which is typical of group 8 metals bonded to oxide supports. This is the first simple and nearly uniform supported mononuclear rhodium-olefin complex, and it appears to be a close analogue of molecular catalysts for olefin hydrogenation in solution. Correspondingly, the ethylene ligands bonded to rhodium in the supported complex were observed to react with H(2) to form ethane, and the supported complex was catalytically active for the ethylene hydrogenation at 298 K. The ethylene ligands also underwent facile exchange with C(2)D(4), and exposure of the sample to carbon monoxide led to the formation of rhodium gem dicarbonyls.     

Synthesis of Δ2-imidazolines in ethylene gylcol

The use of ethylene glycol as the solvent in the condensation of carboxylic acid and their derivatives with ethylenediamine or its salts makes it possible to obtain various Δ²-imidazolines in good yields. The ionization constants and the characteristic frequencies of the IR spectra of the synthesized compounds are presented.