Programmed-temperture split-splitless injection of triglycerides: Comparison to cold on-column injection

The performance of split and splitless programmed-temperature (PTV) injection is compared to cold on-column and hot (classical) split injection for the analysis of triglycerides on an apolar capillary gas chromatographic column. Quantitative accuracy and precision of PTV injection are determined for a synthetic mixture of triglycerides relative to cold on-column injection.     

Comparison of packed and capillary columns for quantitative gas chromatography of triglycerides in milk fat

Summary Quantitative gas chromatography of triglycerides in conjunction with established triglyceride formulae can be used to determine various milk fat parameters. Since the evaluation of, for example, iodine number or content of non-milk fats (foreign fats) in milk fat requires only the separation of triglycerides by carbon number and since repeatabilities, especially of the highboiling triglycerides, have been less acceptable with capillary columns in the past, packed columns have been used exclusively. There is, however, an increasing demand for the use of capillary instead of packed columns and to that end the present investigation has been carried out. To achieve a suitable resolution, with this particularly exacting high-temperature application, a short 5 m capillary column of extreme temperature stability has been used. As well as modification of various analytical conditions different injection techniques have been investigated. On-column, PTV and split injection were compared with regard to repeatability. The cold-on-column injection technique was found to produce the best results, being comparable to the excellent precision of a packed column. Thus, a method is now available by means of which the determination of milk fat parameters by the triglyceride formulae, such as the amount of foreign fats in milk fat, can now be carried out with a standardized capillary column.     

Quantitative and qualitative analysis of triglycerides using gradient elution with UV detection

Summary A gradient reverse phase system is reported which was compatible with UV detection at 220 nm and was suitable for fats containing a wide range of carbon number.Cis andtrans isomers were well resolved and better precision was obtained for poly-unsaturated fats than by capillary GC. Diode array detection with an isocratic system enabled the absorbance ratio at 220/225 nm to be monitored and this appears to give a useful indication of the type of unsaturation present in eluted triglycerides.     

Combining chromatography and chemometrics for the characterization and authentication of fats and oils from triacylglycerol compositional data—A review

The characterization and authentication of fats and oils is a subject of great importance for market and health aspects. Identification and quantification of triacylglycerols in fats and oils can be excellent tools for detecting changes in their composition due to the mixtures of these products. Most of the triacylglycerol species present in either fats or oils could be analyzed and identified by chromatographic methods. However, the natural variability of these samples and the possible presence of adulterants require the application of chemometric pattern recognition methods to facilitate the interpretation of the obtained data. In view of the growing interest in this topic, this paper reviews the literature of the application of exploratory and unsupervised/supervised chemometric methods on chromatographic data, using triacylglycerol composition for the characterization and authentication of several foodstuffs such as olive oil, vegetable oils, animal fats, fish oils, milk and dairy products, cocoa and coffee.     

Quality control of vegetable oil methyl esters used as diesel fuel substitutes: Quantitative determination of mono-, di-, and triglycerides by capillary GC

Vegetable oil methyl esters are increasingly being used as substitutes for petroleum-based diesel fuels. Because the presence of triglycerides and partial glycerides in the fuel as a result of incomplete transesterification of vegetable oils can lead to serious engine problems, continuous quality control of the product is essential. A rapid gas chromatographic method has been developed for the quantitative determination of mono-, di-, and triglycerides in vegetable oil methyl esters. Prior to analysis, mono-, and diglycerides were silylated with N,O-bis(trimethylsilyl)trifluoroacetamide; tridecanoin was used as internal standard. Calibration was performed by analysis of standard solutions containing mono-, di-, and triolein: the calibration plots for mono- and diglycerides showed good linearity, whereas for triglycerides no linearity was observed for triolein concentrations below 0.05 mg/ml. When a non-linear multi level calibration was employed for the quantitation of triglycerides, the method gave excellent quantitative results for mono-, di-, and triglycerides in vegetable oil methyl esters.     

Structure elucidation of triglycerides by chromatographic techniques. Part 2: RP HPLC of triglycerides and brominated triglycerides

The structure determination of triglycerides by RP HPLC is discussed, and the importance of temperature and mobile phase composition demonstrated. The formation of brominated triglycerides followed by RP HPLC analysis allows rapid determination of cocoa butter equivalents (CBE ) in cocoa butter and chocolate products.     

Gas chromatographic separation of triglycerides according to their degree of unsaturation on glass capillary columns

Triglycerides are separated according to their molecular weight and their degree of unsaturation on glass capillary columns by use of the on-column injection technique. The columns employed are silylated SE-30 columns of 4.5, 8, and 10m length with a film thickness of ca. 0.15 μm. The paper gives several examples of chromatograms of natural and hydrogenated triglycerides as well as of mixtures of pure, known triglycerides before and after interesterification.     

快原子轰击质谱直接分析山核桃油中的混合甘油三酸酯

本文利用快原子轰击质谱(FABMS)直接测定山核桃油中未经任何前处理的混合甘油三酸酯,能获得其分子量和碎片结构信息,在GC和GC/MS分析的基础上。根据FABMS测得的分子量可推导出甘油三酸酯的组成和不同甘油三酸酯的含量。FABMS定量结果和GC、GC/MS测定结果及文献值相符。     

Development of heterogeneous catalysts for transesterification of triglycerides

This paper describes a preliminary work done towards the development of new metallic heterogeneous catalysts to be used in the transesterification reaction of triglycerides, which is of considerable interest in the production of biodiesel. Biodiesel is a mixture of mono-alkyl esters of fatty acids, and is currently manufactured by transesterification of triglycerides with methanol using NaOH or KOH as liquid base catalyst. Catalysts as such are corrosive to the equipment, and as these catalysts are present in the liquid phase, must be neutralized after the completion of the reaction, typically using HCl, thus producing salt streams. Moreover, due to the presence of free fatty acids, it reacts to form soaps as unwanted by-products, hence requiring more expensive separation processes. Therefore, there is a great need for the development of industrial processes for biodiesel production using solid acid catalysts. The key benefit of using solid acid catalysts is that no polluting by-products are formed, and the catalysts do not have to be removed since they do not mix with the biodiesel product.     

FABES and FAPES – transesterification of triglycerides with higher alcohols. Quantitation and mass spectrometric evaluation

In order to facilitate the gas chromatographic determination of butyric as well as other short chain fatty acids, triglycerides containing these fatty acids were transbutylated and transpentylated to give FABES (fatty acid butyl esters) and FAPES (fatty acid pentyl esters), respectively. This method allows the molecular weight of the compounds to be increased while their polarity is decreased. Short chain esters elute sufficiently separated from the solvent; due to the decreased polarity, elution of long chain fatty acids is only slightly retarded compared to the corresponding methyl esters. Quantitative evaluation over a large series of injections proved the linearity of correction factors in both cases, FABES and FAPES, with a slight deviation for 16:0 and 18:0, respectively. Structural characterization was performed by GC/MS. It was shown that there are characterstic fragmentations for FABES as well as for FAPES. The El-mass spectra give structural information about the alcohol and acid moieties, the ester molecule and the Cl-spectra indicate the molecular weight. The absence of abundant highly characteristic peaks in the spectra of these esters makes the detection of FABES or FAPES in complex mixtures more difficult than the detection of FAMES with their very characteristic ions at m/z 74 and 87.     

Chemical equilibrium of transesterification reactions between mixed triglycerides and methanol

The chemical equilibrium of the transesterification reactions between methanol and mixed triglycerides containing radicals of palmitic, oleic, and linoleic fatty acids are studied. Based on the results of chemical equilibrium calculation, the behavior of the transesterification reaction of mixed triglycerides in the state of chemical equilibrium is predicted, both in the ideal approximation and with allowance for nonideality, in particular, in the region of supercritical state of the reaction mixture.     

Quantification of carnitine esters by high-performance liquid chromatography. Effect of feeding medium-chain triglycerides on the plasma carnitine ester profile.

A high-performance liquid chromatographic (HPLC) technique was developed using commercially available derivatization reagents and commonly used reversed-phase HPLC column chemistry to analyze plasma samples for their carnitine ester content. The method proved to be sufficiently sensitive to determine changes in the carnitine ester profile in plasma resulting from metabolic disorders or metabolic insults. The method was tested using plasma samples obtained from pigs fed medium-chain triglycerides (MCT) of different chain lengths (four to seven carbons). The MCT feeding was associated with transient increases in plasma carnitine and carnitine esters, and feeding odd-chain MCT (tri-C5 or tri-C7) led to elevated levels of propionylcarnitine in plasma.     

Transformations of peroxide ozonolysis products of (R)-Menth-4-en-3-one in the presence of nitrogen-containing organic compounds

The results of ozonolysis of (R)-menth-4-en-3-one in methylene chloride, methanol, or their 1: 1 mixture in the presence of pyridine, triethylamine, or semicarbazide hydrochloride are reported. Probable schemes for the formation of ozonolysis products, including minor ones, are proposed. Nitrogen-containing organic compounds can act as reducing agents toward peroxides or catalyze their rearrangements.     

Cutting of single-walled carbon nanotubes by ozonolysis

Cutting of single-walled carbon nanotubes (SWNT) has been achieved by extensive ozonolysis at room temperature. Perfluoropolyether (PFPE) was selected as a medium for cutting SWNT due to its high solubility for ozone (O3). A mixture of 9 wt % of O3 in O2 was bubbled through a homogeneous suspension of pristine SWNT in PFPE, at room temperature. The intense disorder mode in the Raman spectra of ozonated SWNT indicates that extensive reaction with the sidewalls of SWNT occurs during ozonolysis. Atomic force microscopy (AFM) images of SWNT, before and after ozonolysis, provided a measure of the extent of the cutting effects. Monitoring of the evolved gases for both pristine and purified SWNT indicates CO2 was produced during the ozonolysis process with a dependence on both system pressure and temperature. During heating, FTIR analysis of gases released indicated that carbon oxygen groups on the sidewalls of SWNT are released as CO2. SWNT was found to be extensively cut after an ozone treatment with a yield of approximately 80% of the original carbon.     

A case for discotic liquid crystals in molten triglycerides

To date, essentially only two structural models have been proposed and debated in detail for explaining the liquid state order of triglycerides, and both invoke a form of thermotropic liquid crystalline order in triglyceride melts. These are the paralamellar model of Larsson et al. (J. Am. Oil Chem. Soc. 1992, 69, 835) and the nematic model of Cebula et al. (J. Am. Oil Chem Soc. 1992, 69, 130). An alternative discotic model is proposed here that adequately accounts for the broad small-angle X-ray diffraction peak often observed in the liquid state of fats and oils. In this alternative model, triglyceride molecules exist in the liquid state with fully splayed chains, approximating "Y"-shapes (Y-conformers). These are loosely bound within discs that stack into flexible, relatively short cylindrical rods of colloidal dimension, which in turn assemble into rod-packings with short-range order akin to disordered versions of thermotropic discotic liquid crystalline phases in other lipidic systems.     

Analysis of mixtures containing free fatty acids and mono-, di- and triglycerides by high-performance liquid chromatography coupled with evaporative light-scattering detection

Commercial monostearates of glycerol, generally used as antistatic agents for thermoplastic polymers, consist of a complex mixture of mono-, di- and trisubstituted glycerides and the corresponding fatty acids. Thus far, the glycerides and the fatty acids have been analyzed separately by high-performance liquid chromatography (HPLC). In fact, the simultaneous analysis of glycerides and fatty acids requires esterification of the acids in order to avoid overlapping of the chromatographic peaks. This paper describes an HPLC method which allows the direct separation and identification, simultaneously and in a single run, of the variously substituted glycerides, and also the corresponding saturated fatty acids that are found as by-products in commercial glycerol monostearates. The procedure is based on the use of a ternary gradient HPLC instrument equipped with an evaporative light-scattering detector; the stationary phase was a reversed-phase RP-8 end-capped (Merck) column; the mobile phase was two consecutive binary gradients consisting of acetonitile-water plus acetic acid (0.1%, v/v) and acetonitrile-methylene chloride. The method is fast and shows high sensitivity and selectivity, being able to separate also the positional isomers of mono- and digycerides in addition to the mixed di- and triglycerides.     

A study of the ozonolysis of butadiene rubber in the presence of ethanol

The reaction of ozone with butadiene rubber (BR) having the microstructure: 90% 1,4-cis and 10% 1,4-trans and 1,2-cis, was investigated in pure chloroform and ethanol/chloroform mixture, respectively. Gel permeation chromatography was used to follow the molecular weight change of ozonolysed BR, and FT-IR and ¹H NMR were used to characterize the type and relative content of functional groups of ozonolysis products. It was found out that although the final ozonolysis products had almost the same functional groups whether ethanol was added or not, the addition of ethanol could efficiently prevent the cross-linking of ozonolysed BR.     

Quantitative variability in the 252Cf plasma desorption mass spectra of triglycerides and waxes

A series of mixtures of solid triglycerides and waxes are examined using ²⁵²Cf plasma desorption mass spectrometry. The relative abundances of diagnostic ions are found to vary with sample preparation, handling, and composition. It is proposed that the less efficiently packing, shorter chain, compounds are forced to the analysis site, i.e. the surface. This takes place at varying rates that reflect the bulk properties of the mixture as revealed by its phase diagram and thermal history. Mixtures that remain liquids during analysis show ion abundances correctly reflecting their composition. Mixtures of isotopomeric glycerides also show normal ion abundances.     

Tetrahydro‐1,5‐benzoxazepines and tetrahydro‐1H‐1,5‐benzodiazepines by a tandem reduction‐reductive amination reaction

A tandem reduction‐reductive amination reaction has been applied to the synthesis of (±)‐4‐alkyl‐2,3,4,5‐tetrahydro‐1,5‐benzoxazepines and (±)‐4‐alkyl‐1‐benzoyl‐2,3,4,5‐tetrahydro‐1H‐1,5‐benzodiazepines. The nitro aldehydes and ketones required for 1,5‐benzoxazepine ring closures were prepared by nucleophilic aromatic substitution of the alkoxides from several 3‐buten‐1‐ol derivatives with 2‐fluoro‐1‐nitrobenzene followed by ozonolysis. Precursors for the 1,5‐benzodiazepines were prepared by similar addition of N‐(3‐butenyl)benzamide anions to 2‐fluoro‐1‐nitrobenzene followed by ozonolysis. Catalytic hydrogenation of the nitro carbonyl compounds using 5% palladium‐on‐carbon in methanol then gave the target heterocycles by a tandem reduction‐reductive amination sequence. The 1,5‐benzoxazepines were isolated in high yield following chromatographic purification; the 1,5‐benzodiazepines were isolated as solids directly from the hydrogenation mixture and possessed differentiated functionality on the two nitrogen atoms.     

Determination of pyrethroids and their degradation productds in indoor air and on surfaces by HRGC-ECD and HRGC-MS(NCI)

Air and surface samples taken following indoor applications of natural pyrethrins and pyrethroids have been analyzed by HRGC-ECD and HRGC-MS using negative chemical ionization (NCI). It has been found that pyrethroids persist on surfaces as long as sixty hours after application. Primary pyrethroid degradation products have been characterized by mass spectrometry; their identities and route of formation by ozonolysis have been verified by degradation studies and NMR.