Kinetics,mechanism, and endo selectivity of Diels–Alder reactions of alkylmonosubstituted ethenes with cyclohexa-1,3-diene in the gas phase

The reactions where Y = CH₃ (M), C₂H₅ (E), i? C₃H₇ (I), and t? C₄H₉ (T) have been studied between 488 and 606 K. The pressures of CHD ranged from 16 to 124 torr and those of YE from 57 to 625 torr. These reactions are homogeneous and first order with respect to each reagent. The rate constants (in L/mol·s) are given by The Arrhenius parameters are used as a test for a biradical mechanism and to discuss the endo selectivity of the reactions.     

Kinetics and mechanisms of the reaction of acetylene with cyclohexa-1,3-diene and the decomposition of bicyclo[2.2.2]-octa-2,5-diene in the gas phase

The reaction of acetylene (A) with cyclohexa-1,3-diene (CHD) has been studied between 450 and 592 K. The pressures of A ranged from 25 to 112 torr and those of CHD from 8 to 62 torr. The reaction yields only ethene (E) and benzene (B) instead of bicyclo[2.2.2]octa-2,5-diene (BOD), the product that is expected for a 1,4,1′,2′ addition of the Diels–Alder type. It is first order with respect to each reagent. The rate constant (in L/mol·s) is given by The thermal decomposition of BOD has also been studied. In the ranges of 354–435 K and 0.5–6 torr, the reaction is first order and results in the formation of equal amounts of B and E as the reaction of A with CHD does. Its rate constant (in s^?1) is given by The following consecutive reactions are proposed for the reaction between A and CHD: where BOD is the primary product that is too unstable to be detected. This implies that the rate constant k is equal to k_a. The reaction mechanisms and the strain energy in BOD are discussed.     

Thermal dimerization of 1,3-butadiene: Kinetics of the formation of cis,cis-cycloocta-1,5-diene

The thermal reaction of 1,3-butadiene (BD) has been studied between 464 and 557°K at pressures between 49 and 450 torr. The products are 4-vinylcyclohexene (VCH) and cis, cis-cycloocta-1,5-diene (COD), and their formations are second order. The rate constant (in 1/mol · sec) for VCH is given by and that for COD by The thermal reaction of COD has also been studied. The temperature was varied from 505 to 586°K and the pressure from 15 to 51 torr. The rate constants (in sec^?1) for the formations of VCH and BD are given by A biradical mechanism seems to fit these results. The heat of formation and the entropy of COD are estimated.     

The loss of CH3⋅ from some unsaturated dithioesters

The mechanism for the loss of CH₃? (and C₂H₅?) from the molecular ions of some unsaturated dithioesters of the type with n=0, 1, 2, has been studied. Based on first field free region metastable ion characteristics it is proposed that 1,3-dithiolium type product ions are generated. Deuterium labelling experiments indicated that the molecular ions of the 2-alkenyl alkanedithioates undergo a rearrangement prior to fragmentation which resembles the [3,3]sigmatropic rearrangement in solution chemistry.     

Thermal decomposition of 1,1,2,2-tetramethylcyclopropane in a single-pulse shock tube

1,1,2,2-Tetramethylcyclopropane (TTMC) has been decomposed in a single-pulse shock tube. The main reaction process is Side reactions are unimportant. From comparative rate experiments (with cyclohexene decomposition as standard) the rate expression for these reactions are These numbers are consistent with a «best» value for cyclohexene decomposition of      

Modification of poly(vinyl alcohol) through reaction with phosphorus-containing reactants

Crosslinked products of the form: and have been formed from the interfacial condensation of phosphorus diacid halides with poly(vinyl alcohol). Product yield and amounts of phosphorus reactant included in the product increases as the amount of base increases. Product stability in aqueous systems decreases in the order neutral > base > acid.     

Novel C‐acylated triazole derivatives of ravuconazole,an azole antifungal agent

Novel C‐acylated triazoles were synthesized from ravuconazole via bicyclic triazole lactone. The synthesis and antifungal activity of these C‐acylated derivatives are described.     

Thermal decomposition of azoisopropane. I. Primary decomposition processes

The thermal decomposition of azoisopropane (AIP) was studied by detailed product analysis in the temperature and pressure intervals 498–563 K and 0.67–5.33 kPa. Besides the predominant termination and hydrogen-abstraction reaction of the 2-propyl radical, the decomposition is characterized by a very short chain process. The following rate constants were determined from the measurements for the following reactions:      

Photolysis of azomethane–propane mixtures. Arrhenius parameters for the hydrogen abstraction reactions of methyl with azomethane and with propane

Mixtures of up to 14% azomethane in propane have been photolyzed using mainly 366 nm radiation in the ranges of 323–453 K and 25–200 torr. Detailed measurements were made of the yields of nitrogen, methane, and ethane. Other products observed were isobutane, n-butane, ethene, and propene. A detailed mechanism is proposed and shown to account for the observed variation of product yields with experimental conditions. The quantum yield of the molecular process is found to be given by the temperature-independent equation The values of rate constants obtained are where the reactions are and it is assumed that the rate constant for the reaction is given by      

Le Spectre de L'Alcool Propargylique en Fonction du pH. Un Exemple de Transferts Protoniques Complexes sur un Diacide Organique

Dimethyl sulphoxide (DMSO) is used as a solvent to investigate the kinetic acidity of very weak organic diacids by ¹H d.n.m.r. An inspection of the spectrum of propargyl alcohol as a function of the pH allows the assignment of various proton transfer mechanisms:      

Thermal decomposition of 3-chloro-3-trichloromethyldiazirine in solution

The thermal decomposition of 3-chloro-3-trichloromethyldizairine in carbon tetrachloride and iso-octane has been investigated over the temperature range 75–115°C. The products, tetrachloroethylene and nitrogen, are formed quantitatively by a first-order reaction which is probably unimolecular: The results yielded the following Arrhenius equations: .     

Reactions of isopropylperoxy radicals with NO and NO2

The rate constants for the reactions have been measured directly by flash photolysis and kinetic spectroscopy. At room temperature, k₃ = (3.4 ± 0.1) × 10⁹ L/mol·s, independent of pressure in the range of 55–400 torr, and k₆ = (2.1 ± 0.2) × 10⁹ L/mol·s.     

[2, 3] Sigmatropic Rearrangements on Lithiation of Some Allyl Sulfides. Preliminary communication

In five cases, [2,3] sigmatropic rearrangement of the type has been observed.     

Synthesis and psychotropic properties of furyl- and thienyl-germatranes

Trihalogermyl-furans and -thiophenes were prepared by inserting germanium dibromide (GeBr₂) generated from the dibromogermane(II) dioxanate complex into the carbon-halogen bond of halo-furans and -thiophenes. Their ethanolysis and transesterification by triethanolamine yielded the germatranes which were subjected to psychotropic activity assays. The psychotropic properties of germatranes were found to depend on the type of the heterocycle and on the position of the germatrane moiety.     

Kinetics of the pyrolyses of endo- and exo-5-methylbicyclo (2.2.2) oct-2-ene in the gas phase

The pyrolyses of endo- and exo-5-methylbicyclo (2.2.2) oct-2-ene (endo- and exo-MBO) have been studied between 608 and 679°K at pressures between 7 and 37 torr. These reactions correspond to parallel first-order eliminations of propene and ethylene: The rate constants (in sec^?1) for endo-MBO are given by and those for exo-MBO by Reaction mechanisms involving diradicals are shown to be compatible with the experimental results. The heats of formation and the entropies of endo and exo-MBO are estimated.     

The kinetics of thermal dimerization of hexatriene

The thermal isomerization of cis-hexatriene (cHT) to cyclohexadiene (CHD) and the dimerization of CHD and trans-hexatriene (tHT) in the liquid phase in the temperature range 380 K-473 K are reported. The rate coefficients are: for the cHT to CHD isomerization for tHT dimerizationlog and for CHD dimerization; endo form exo form © 1993 John Wiley & Sons, Inc.     

Mechanism of inhibiting action of quinones in oxidizing polymers and model compounds

Quinones (Q) do not affect the liquid-phase oxidation of hydrocarbons and retard the solid-phase oxidation of polymers terminating chains in reactions with alkyl macroradicals. This difference is the result of specific influence of a polymer matrix on the kinetics of free radical reactions. Quinones were found to terminate chains in oxidizing polypropylene containing hydroperoxide groups by the reaction with hydroperoxyl radicals. This is the result of peroxide group's decomposition with hydrogen peroxide production and chain termination in the following reactions: The equilibrium reaction between hydroquinone (QH₂) and quinonimine (QI) was evidenced to proceed as a chain reaction with chain propagation in reactions of •QH with QI and HQI• with QH₂. Analysis of the reactions of quinone with phenols (ArOH) proved that it can be important as an additional way of chain termination in oxidizing polymers and hydrocarbons at elevated temperatures.     

Darstellung und Eigenschaften von Ti-substituierten N-Heterocyclen

Preparation and Properties of Ti-substituted N-Heterocycles The compounds (x = 2 to 6) have been prepared by transamination of Ti(NMe₂)₄ with the heterocyclic amines and have been characterised by elemental analyses and ¹H NMR and IR spectroscopy. The dependence on both x and n of the thermal decomposition has been studied for the series and . The results can be interpreted in terms of the steric strain of the R₂N and substituents. Apart from the piperidido groups none of the ligands exhibit protective group properties comparable to the R₂N groups.     

Ion pair catalysis of the autooxidative cleavage of benzoin in emulsion systems

A study was made of the autooxidation of benzoin in organic-aqueous sodium hydroxide emulsions in the presence of several quaternary ammonium salts. The rate of the reaction was found to be accelerated by these salts, probably by ion pair extraction. In pyridine and acetonitrile systems the reaction was almost exclusively the formation of benzoate. Neither benzil nor benzaldehyde were intermediates in the oxidation process. The rate law for the reaction was found to be which led to the conclusion that the rate-determining step in the catalyzed pathway was the reaction of oxygen with the ion pair:      

Studies on Radical Cations I. Molecular and electronic structure of [3]radialene cation produced by γ-irradiation in condensed phase

γ-Irradiation of tris (methylidene)-cyclopropane (‘[3]radialene’) 1 in a rigid electron scavenging matrix (butylchoride/i-pentane, 1:1) at 77 K leads to formation of its molecular cation 1 ⁺. Slight softening of the matrix by a temperature increase of 3–5 K results in formation of a newly absorbing species, tentatively assigned arising from structrral relaxation of 1 ⁺ by π-bond rotation: