低碱度共沉淀法制备苯选择加氢Ru-Zn催化剂

在低碱度下采用共沉淀法成功制备了非负载型Ru-Zn催化剂,用于苯选择加氢制环己烯反应.固定氢氧化钠沉淀剂的量,考察了不同氯化锌加入量对催化剂结构和催化性能的影响,采用N2吸附、X射线衍射和程序升温还原等手段对催化剂进行了表征.同时考察了选用具有最佳锌含量的Ru-Zn催化剂时搅拌速度和硫酸锌添加剂等对催化反应性能的影响,最后考察了催化剂多次使用时的反应性能.研究表明, Zn含量16.7%(质量分数)的Ru-Zn催化剂具有最佳的催化性能;在ZnSO4水溶液(0.45 mol/L)中,优化反应条件(哈氏合金釜,1200 r/min,150oC, H2压5 MPa)下反应45 min,苯转化率57%时环己烯选择性可达80%(收率超过45%).钌催化剂中ZnO晶体对于环己烯选择性达到80%非常重要.催化剂回收循环反应5次时反应性能基本不变,表明低碱度下制备的催化剂具有良好的稳定性,显示了工业化应用前景.     

低碱度共沉淀法制备苯选择加氢Ru-Zn催化剂（英文）

在低碱度下采用共沉淀法成功制备了非负载型Ru-Zn催化剂,用于苯选择加氢制环己烯反应.固定氢氧化钠沉淀剂的量,考察了不同氯化锌加入量对催化剂结构和催化性能的影响,采用N2吸附、X射线衍射和程序升温还原等手段对催化剂进行了表征.同时考察了选用具有最佳锌含量的Ru-Zn催化剂时搅拌速度和硫酸锌添加剂等对催化反应性能的影响,最后考察了催化剂多次使用时的反应性能.研究表明,Zn含量16.7%(质量分数)的Ru-Zn催化剂具有最佳的催化性能;在Zn SO4水溶液(0.45 mol/L)中,优化反应条件(哈氏合金釜,1200 r/min,150 oC,H2压5 MPa)下反应45 min,苯转化率57%时环己烯选择性可达80%(收率超过45%).钌催化剂中Zn O晶体对于环己烯选择性达到80%非常重要.催化剂回收循环反应5次时反应性能基本不变,表明低碱度下制备的催化剂具有良好的稳定性,显示了工业化应用前景.     

二乙醇胺作添加剂Ru-Zn催化剂上苯选择加氢制环己烯

采用共沉淀法制备了Ru-Zn催化剂,考察了二乙醇胺的添加对Ru-Zn催化剂上苯选择加氢制环己烯性能的影响,并采用N2物理吸附、透射电镜、X射线衍射、X射线荧光、傅里叶变换红外和程序升温还原等手段对催化剂进行了表征.结果表明,二乙醇胺可以与浆液中ZnSO4反应生成(Zn(OH)2)3(ZnSO4)(H2O)3和硫酸二乙醇胺盐.随着二乙醇胺用量的增加,化学吸附在催化剂表面的(Zn(OH)2)3(ZnSO4)(H2O)3增多,它与硫酸二乙醇胺盐的协同作用提高了Ru-Zn(4.9%)催化剂上苯选择加氢生成环己烯的选择性.当二乙醇胺用量为0.3g时,(Zn(OH)2)3(ZnSO4)(H2O)3在Ru-Zn(4.9%)催化剂加氢后样品的表面高度分散,反应性能最佳,循环使用第3次时苯转化率为84.3%,环己烯选择性和收率分别达75.5%和63.6%;使用至第4次时,反应25min时苯转化率和环己烯选择性仍可达75%以上,环己烯收率为58%以上.     

反应修饰剂ZnSO_4和预处理对苯选择加氢制环己烯Ru-Zn催化剂性能的影响

共沉淀法制备了Ru-Zn催化剂,考察了反应修饰剂ZnSO_4和预处理对苯选择加氢制环己烯Ru-Zn催化剂性能的影响。结果表明,反应修饰剂ZnSO_4可以与Ru-Zn催化剂中助剂Zn O反应生成(Zn(OH)2)3(ZnSO_4)(H_2O)盐。随反应修饰剂ZnSO_4浓度增加,(Zn(OH)2)3(ZnSO_4)(H_2O)盐量逐渐增加,Ru-Zn催化剂活性逐渐降低,环己烯选择性逐渐升高。因为(Zn(OH)2)3(ZnSO_4)(H_2O)盐中的Zn2+可以使Ru变为有利环己烯生成的缺电子的Ruδ+物种,而且还可以占据不适宜环己烯生成的强Ru活性位。但当反应修饰剂ZnSO_4浓度高于0.41 mol·L-1后,继续增加ZnSO_4浓度,由于Zn2+水解浆液酸性太强,可以溶解部分(Zn(OH)2)3(ZnSO_4)(H_2O)盐,RuZn催化剂活性升高,环己烯选择性降低。环己烯选择性略微降低,是由于ZnSO_4溶液中大量的Zn2+可以与生成的环己烯形成配合物,稳定生成的环己烯,抑制环己烯再吸附到催化剂表面并加氢生成环己烷。在ZnSO_4最佳浓度0.61 mol·L-1下对Ru-Zn催化剂预处理15 h,Ru-Zn催化剂中助剂Zn O可以与ZnSO_4完全反应生成(Zn(OH)2)3(ZnSO_4)(H_2O)盐,在该催化剂上25 min苯转化68.2%时环己烯选择性和收率分别为80.2%和54.7%。而且该催化剂具有良好的稳定性和重复使用性能。     

一种新型Ru-Zn体系催化苯选择加氢制环己烯的研究

制备了一种新型苯选择加氢制环己烯Ru-Zn催化剂.研究表明,该催化剂不但具有较好的活性选择性,而且具有稳定的晶态结构,良好的沉降分离性能.Zn/Ru比为8/92时,15min环己烯的收率达48.3%.利用XRD和物理吸附仪等手段对催化剂进行了表征.XRD证实了Ru和Zn形成固溶体,并观察到金属锌物相的存在.     

阿拉伯树胶修饰的纳米Ru-Zn催化剂上苯选择加氢制环己烯

用共沉淀法制备了纳米Ru-Zn催化剂,考察了阿拉伯树胶修饰对苯选择加氢制环己烯催化剂性能的影响,并用X射线衍射(XRD)、透射电镜(TEM)、N_2-物理吸附、X射线光电能谱(XPS)和X射线荧光光谱(XRF)等手段对催化剂进行了表征。结果表明,阿拉伯树胶的用量可以调变Ru-Zn催化剂的粒径。最高环己烯收率随粒径的增大呈火山型变化趋势。当阿拉伯树胶与RuCl_3·x H_2O的质量比为0.033时,Ru-Zn催化剂的最佳粒径为4.0 nm,最高环己烯收率达59.6%。且该催化剂具有良好的重复使用性能。     

由苯制备环己醇新途径

将可溶性Ru纳米粒子用于催化苯选择性加氢制备环己烯反应,考察了还原方法对Ru纳米粒子催化活性的影响;并以醇水还原法制备的Ru纳米粒子为催化剂,考察了温度和压力对反应性能的影响.当使用脱硫的苯作为原料时,苯转化率可达30.2%,环己烯选择性达到46.9%.以无水兰尼镍作催化剂,100oC时,环氧环己烷加氢转化率为100%,环己醇选择性为93.2%.从原料苯出发制得环己醇的单程收率可达14%,由此找到一条制备环己醇的新途径.     

纳米 ZrO2 作分散剂的 Ru-Zn 催化剂上苯选择加氢制环己烯

 采用水热法合成了比表面积分别为 34 和 87 m2/g 的 ZrO2 样品 (分别记为 ZrO2-34 和 ZrO2-87), 并考察了它们作分散剂时 Ru-Zn 催化剂上苯选择加氢制环己烯反应的性能. 结果表明, 两个 ZrO2 样品具有相近的纯度和物相, 晶粒粒径分别为 21.6 和 11.4 nm. 其中 ZrO2-34 具有较小的比表面积、较大的孔径、较小的粒径、集中的粒度分布和较大的堆密度, 因而更适合用作苯选择加氢制环己烯 Ru-Zn 催化剂的分散剂, 且循环使用多次催化剂仍表现出较高的选择性和稳定性.     

新型苯选择加氢制环己烯非晶态催化剂Ru-Fe-B/ZrO2的制备及其可调变性

采用化学还原法制备了一种新型高活性和高选择性苯选择加氢制环己烯的Ru-Fe-B/ZrO2纳米非晶态合金催化剂,并利用透射电镜、选区电子衍射、X射线衍射和N2物理吸附仪等手段对催化剂进行了表征.重点研究了Ru-Fe-B/ZrO2催化剂活性和选择性的可调变性,及还原剂NaBH4浓度和洗涤后滤液的pH值对其催化性能的影响.结果表明,在新型Ru-Fe-B/ZrO2催化剂上,当苯转化54%时,环己烯选择性高达80%,同时环己烯选择性随苯转化率升高而缓慢下降.向反应浆液中添加酸性或碱性物质可以调变催化剂的活性和选择性,同时催化剂制备工艺和性能具有很好的可重复性.Ru-Fe-B/ZrO2催化剂融合了纳米和非晶材料的特性,这是其对苯选择加氢制环己烯表现出高活性和高选择性的主要原因.     

Ru-Zn催化剂在苯选择加氢制环己烯反应中的粒径效应

采用共沉淀法制备了水溶性聚合物修饰的苯选择加氢制环己烯Ru-Zn催化剂, 并用X射线衍射、 透射电镜、 X射线能量色散谱、 X射线光电子能谱和氮气物理吸附等对加氢后催化剂进行了表征. 结果表明, 水溶性聚合物的种类和聚乙二醇-20000(PEG-20000)的用量对Ru-Zn催化剂微晶尺寸有显著影响. 在ZnSO₄存在下, 随着Ru-Zn催化剂Ru微晶尺寸增加, 苯转化率降低, 环己烯最高收率则呈火山型变化趋势. 用0.4 g PEG-20000修饰的Ru-Zn催化剂[m(PEG-20000)∶m(Ru)=0.2]Ru的微晶尺寸为4.8 nm, 环己烯最高收率为62.2%. Ru微晶尺寸影响催化剂表面的Zn/Ru原子比, 进而影响Ru-Zn催化剂性能.     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Selective syntheses of 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones via temperature-dependent Rh(II)-carbenoid-mediated 2H-azirine-ring expansion

The Rh(II)-catalyzed reaction of 2-carbonyl-substituted 2H-azirines with ethyl 2-cyano-2-diazoacetate or 2-diazo-3,3,3-trifluoropropionate provides an easy access to 2H-1,3-oxazines and 1H-pyrrol-3(2H)-ones. These compounds can be selectively prepared from the same starting material using temperature as the only varied parameter. The 2-azabuta-1,3-diene intermediate, a common precursor for both heterocyclic products, isomerizes into 2H-1,3-oxazine under kinetic control, while 1H-pyrrol-3(2H)-one is the sole product of the reaction at elevated temperatures. According to DFT-calculations a one-atom oxazine ring contraction involving ring-opening to a 2-azabuta-1,3-diene intermediate, followed by a 1,5- and 1,2-prototropic shift leads to the consecutive formation of imidoylketene and azomethine ylide, which then further undergo cyclization to the pyrrole derivative.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.