酚醛树脂热裂解碳为电极的双电层电容器的电化学特性

双电层电容器具有体积小、容量大和价格便宜等特点 ,以活性炭为电极的双电层电容器是具有高度可靠性的特殊电源 ,在许多便携式电子仪器和通讯设备上被用作备用电源 .特别是具有相对大容量的电容器已与标准的铅酸蓄电池组成混合体系 ,应用在电动车辆上 [1] .酚醛树脂经热裂解制备的聚并苯导电材料 PAS是制备双电层电容器电极的最佳材料之一 [2～ 10 ] ,它可以进行 p型和 n型掺杂 ,而且耐化学腐蚀、耐氧化和热稳定性好 .本文通过热裂解酚醛树脂来制备容量大、等效串联电阻小、不使用任何重金属、对环境无污染和不需长时间更换的双电层电容器…     

新型活性炭材料在双电层电容器中的应用研究

以椰壳为原料,利用特定的物理 化学方法在一定条件下制得双电层电容器活性炭电极材料.实验表明,该活性炭经压制成型后制作的双电层电容器,具有大的比电容,文中同时研究了酸处理、二次活化以及电极冷压成型方法对电极性能的影响.     

含磷活性炭作为双电层电容器电极材料的电化学性能

采用磷酸活化和磷酸改性制备了不同种类的含磷活性炭,采用元素分析、X射线光电子能谱(XPS)和氮气吸附等手段分析了活性炭的元素含量、表面化学性质和孔隙结构,采用恒电流充放电、循环伏安和交流阻抗分别考察了活性炭在KOH和H₂SO₄电解质溶液中作为超级电容器电极材料的电化学性能,采用自由截距多元线性回归拟合统计分析研究了活性炭电极比电容量的影响因素,应用三电极体系分析了磷元素对活性炭电化学性能的影响机理。研究结果表明,活性炭掺杂的磷引入了赝电容,提高了活性炭电极的比电容量,磷元素含量为5.88%(w)的活性炭的比电容量在0.1 A·g^-1下达到185 F·g^-1。统计分析结果显示,活性炭的中孔有利于电解质离子向微孔内的扩散。在6 mol·L^-1 KOH电解质溶液中,孔径在1.10-1.61 nm、2.12-2.43nm及3.94-4.37 nm范围内是电解质离子在活性炭孔隙内部形成双电层的主要场所;在1 mol·L^-1 H₂SO₄电解质溶液中,孔径在0.67-0.72 nm范围内有利于双电层电容的形成。     

双电层电容器电化学阻抗谱的实验研究

电化学阻抗谱(EIS)是一种很有用的研究电化学性能的技术. 理想的双电层电容器(EDLC)阻抗谱的尼奎斯特图由中高频的45°线和低频的与实轴垂直的直线组成, 可以用孔径分布-传输线模型来解释. 然而, 在研究工作中还发现, 在阻抗谱的高频区出现了半圆弧区域, 为此, 提出的等效模型认为半圆弧可以归因于活性材料之间的接触电阻和接触电容, 以及电极与集流体之间的接触电阻与接触电容. 还研究了充电过程、活性炭和电解液的电导率、导电添加剂和粘结剂的含量、隔膜、活性物质附载量和极片加压等因素对阻抗谱的影响. 其中, 充电截止电压、活性炭的电导率、导电添加剂的含量和极片加压对半圆弧部分影响较为显著.     

双电层电容器电化学阻抗谱的实验研究(英文)

电化学阻抗谱(EIS)是一种很有用的研究电化学性能的技术.理想的双电层电容器(EDLC)阻抗谱的尼奎斯特图由中高频的45°线和低频的与实轴垂直的直线组成,可以用孔径分布-传输线模型来解释.然而,在研究工作中还发现,在阻抗谱的高频区出现了半圆弧区域,为此,提出的等效模型认为半圆弧可以归因于活性材料之间的接触电阻和接触电容,以及电极与集流体之间的接触电阻与接触电容.还研究了充电过程、活性炭和电解液的电导率、导电添加剂和粘结剂的含量、隔膜、活性物质附载量和极片加压等因素对阻抗谱的影响.其中,充电截止电压、活性炭的电导率、导电添加剂的含量和极片加压对半圆弧部分影响较为显著.     

碳基双电层电容器的结构、机理及研究进展

活性炭基双电层电容器是一种新型电化学能量储存装置,其储电机理是利用电极材料比较大的比表面积在电极和电解液之间形成双电层储存电荷,充放电过程中无化学反应发生。活性炭材料由于具有较大的比表面积、良好的孔结构分布、化学惰性表面等,一直是双电层电容器电极的首选材料。本文简要介绍了双电层电容器的制造工艺、应用及发展趋势。     

双电层电容器用新型无灰煤(HyperCoal)基活性炭的制备

以无灰煤(HyperCoal)为原料,KOH和CaCO3为活化剂制备了煤基活性炭,采用低温N2吸附法表征了活性炭的比表面积和孔结构,测定了活性炭用作双电层电容器(EDLC)电极材料的电化学性能。考察了炭化温度、活化温度、活化时间和活化剂对活性炭电容特性的影响。研究结果表明,比表面积和比电容随着炭化温度的升高而降低,活化温度过高或活化时间太长对比电容有不利影响。此外,CaCO3影响活化过程中孔的开发,显著降低所制备活性炭的比表面积和比电容。在炭化温度为500℃、活化温度为800℃、KOH与焦的质量比为4∶1和活化时间2 h下所得活性炭的比表面积和总孔容分别达到2 540 m2/g和1.65 cm3/g,该活性炭电极在0.5 mol/L TEABF4/PC电解液中的比电容达到最大值46.0 F/g。     

隔膜对双电层电容器和混合型电池-超级电容器的电化学性能的影响

隔膜是双电层电容器和混合型电池-超级电容器等电化学储能器件的重要组成元件.本文采用1 mol?L-1四乙基四氟硼酸铵的丙烯碳酸酯电解液制备了基于活性炭的扣式双电层电容器,并采用1 mol?L-1六氟磷酸锂锂离子电解液制备了(LiNi0.5Co0.2Mn0.3O2+活性炭)/石墨体系的混合型电池-超级电容器.研究了不同类型隔膜的物理化学性能,以及其对双电层电容器和混合型电池-超级电容器的电化学性能的影响.四种隔膜分别是无纺布聚丙烯毡、多孔聚丙烯薄膜、Al2O3涂层的聚丙烯薄膜和纤维素纸隔膜.进行了表面形貌、差示扫描量热、电解液吸液量和表观接触角测试表征.电化学测试表明,采用纤维素隔膜的双电层电容器具有最高的比电容和更优的倍率性能,电容器的自放电性能差别不大.而对于混合型电池-超级电容器,采用聚丙烯薄膜和无纺布聚丙烯毡隔膜器件的比容量比其它器件约高20%,且采用纤维素隔膜的器件自放电率最高.     

电化学双电层电容器电极材料——豌豆荚基活性炭的制备与表征

以豌豆荚为碳源、ZnCl₂或KOH为活化剂制备了活性炭, 并用作双电层电容器的电极材料. 采用比表面及孔隙度分析仪表征了豌豆荚基活性炭的孔结构. 通过KOH或ZnCl₂活化后, 活性炭比表面积从1.69 m²·g^-1增大到2237或621 m²·g^-1. 采用循环伏安法和恒流充放电测试技术表征了豌豆荚基活性炭的电化学特性. 结果表明: 在6 mol·L^-1 KOH溶液中经KOH活化处理的活性炭的质量比电容高达297.5 F·g^-1, 并具有良好的充放电稳定性, 在5 A·g^-1的高电流密度下循环充放电500次后, 质量比电容仅衰减8.6%.     

Characterization of Microporous Activated Carbon Electrodes for Electric Double-layer Capacitors

IntroductionElectric double layer capacitors( EDLCs) witha high power density can be used as memory back-up devices or electric vehicles.EDLCs store energyin the electric double layer by charge accumulationon the interface between the electrode and the elec-trolyte. In order to obtain reasonable energies andpower densities,the more suitable material forEDLCs musthave a high surface area with a signif-icant value of specific double layer capacitance,better pore size distribution and electro…     

Structure and Electrochemical Performance of Hollow Tube Activated Carbon Prepared from Cotton as Electrode Material for Electric Double Layer Capacitor

Hollow tube-like activated carbon(HTAC) was fabricated by a simple and efficient carbonization method with cotton as carbon precursor activated by KOH without any template. The activation time from 0 to 90 min showed no significant effect on the micro-morphology, but greatly influenced the specific surface area and electrochemical performance. In the end, it was found that the sample activated for 60 min(HTAC-60) has a higher specific surface area of 2600 m²/g, a larger pore volume of 1.52 cm³/g and a greater specific capacitance of 483 F/g at a current density of 0.2 A/g in 1 mol/L H₂SO₄. Moreover, the sample HTAC-60 shows excellent cycle stability(only 12.2% loss after 5000 cycles) and a high energy density of 67.1 or 37.2 W·h·kg^-1 at a power density of 200 or 1000 W/kg, respectively, operated in a voltage range of 0-1.0 V in 1 mol/L H₂SO₄. The results indicate that cotton can potentially be used as a raw material for producing low cost and high performance activated carbon electrode materials for electric double layer capacitor.     

电化学双电层电容器用新型炭材料及其应用前景

活性炭是目前使用最为广泛的一种电化学双电层电容器（EDLC）的电极材料,但其固有的缺点制约了EDLC性能的进一步提高。用新型高性能炭电极材料可使EDLC比能量和比功率性能进一步提高。这些新型炭材料包括基于石墨层状结构的纳米门炭,基于碳纳米管阵列结构的毛皮炭,通过高温置换反应制备的骨架炭以及电极可整体成型的纳米孔玻态炭。本文介绍了这些炭材料的电化学特性及其在电化学双电层电容器中的应用,指出用这4种新型炭材料制备EDLC的比能量或比功率性能远高于目前活性炭基EDLC,具有良好的应用前景。     

Activated carbon derived from marine Posidonia Oceanica for electric energy storage

In this paper, the synthesis and characterization of activated carbon from marine Posidonia Oceanica were studied. The activated carbon was prepared by a simple process namely pyrolysis under inert atmosphere. The activated carbon can be used as electrodes for supercapacitor devices. X-ray diffraction result revealed a polycrystalline graphitic structure. While scanning electron microscope investigation showed a layered structure with micropores. The EDS analysis showed that the activated carbon contains the carbon element in high atomic percentage. Electrochemical impedance spectroscopy revealed a capacitive behavior (electrostatic phenomena). The specific capacity per unit area of the electrochemical double layer of activated carbon electrode in sulfuric acid electrolyte was 3.16 F cm⁻². Cyclic voltammetry and galvanostatic chronopotentiometry demonstrated that the electrode has excellent electrochemical reversibility. It has been found that the surface capacitance was strongly related to the specific surface area and pore size.     

Enhanced Capacitive Characteristics of Activated Carbon by Secondary Activation

The effect of the improvement of commercial activated carbon(AC) on its specific capacitance and high rate capability of double layer(dl) charging/discharging process has been studied. The improvement of AC was carried out via a secondary activation under steam in the presence of catalyst NiCl2, and the suitable condition was found to be a heat treatment at about 875 ℃ for 1 h. Under those conditions, the discharge specific capacitance of the improved AC increases up to 53. 67 F/g, showing an increase of about 25% as compared with that of as-received AC. The good rectangular-shaped voltammograms and A.C. impedance spectra prove that the high rate capability of the capacitor made of the improved AC is enhanced significantly. The capacitance resistance (RC) time constant of the capacitor containing the improved AC is 1.74 s, which is much lower than that of the one containing as-received AC(an RC value of 4. 73 s). It is noted that both kinds of AC samples show a similar specific surface area and pore size distribution, but some changes have taken place in the carbon surface groups, especially a decrease in the concentration of surface carbonyl groups after the improvement, which have been verified by means of X-photoelectron spectroscopy. Accordingly, it is suggested that the decrease in the concentration of surface carbonyl groups for the improved AC is beneficial to the organic electrolyte ion penetrating into the pores, thus leading to the increase in both the specific capacitance and high rate capability of the supercapacitor.     

Secondary Activation of Commercial Activated Carbon and its Application in Electric Double Layer Capacitor

The cheap commercial activated carbon (AC) was improved through the secondary activation under steam in the presence of FeCl2 catalyst in the temperature range of 800-950℃ and its application in electric double layer capacitors(EDLCs) with organic electrolyte was studied. The re-acivation of AC results in the increases in both specific capacitance and high rate capability of DELCs. For AC treated under optimized conditions, its discharge specific capacitance increases up to 55.65F/g, an increase of about 33% as compared to the original AC, and the high rate capability was increased significantly.The good performances of EDLC with improved AC were correlated to the increasing mesoporous ratio.