Oxygen diffusion and surface exchange in La1−xSrxFe0.8Cr0.2O3−δ (x=0.2, 0.4 and 0.6)

Oxygen tracer diffusion (D*) and surface exchange rate constant (k*) have been measured, using isotopic exchange and depth profiling by secondary ion mass spectrometry (SIMS), in La_1−xSr_xFe_0.8Cr_0.2O_3−δ (x=0.2, 0.4 and 0.6). Measurements were made as a function of temperature (700–1000 °C) and oxygen partial pressure (0.21–10⁻²¹ atm) in dry oxygen, water vapour and water vapour/hydrogen/nitrogen mixtures. At high oxygen activity, D* was found to increase with increasing temperature and Sr content. The activation energies for D* in air are 2.13 eV (x=0.2), 1.53 eV (x=0.4) and 1.21 eV (x=0.6). As the oxygen activity decreases, D* increases as expected qualitatively from the increase in oxygen vacancy concentration. Under strongly reducing conditions, the measured values of D* at 1000 °C range from 10⁻⁸ cm² s⁻¹ for x=0.2 to 10⁻⁷ cm² s⁻¹ for x=0.4 and 0.6. The activation energies determined at constant H₂O/H₂ ratio are 1.21 eV (x=0.2), 1.59 eV (x=0.4) and 0.82 eV (x=0.6).

The surface exchange rate constant of oxygen for the H₂O molecule is similar in magnitude to that for the O₂ molecule and both increase with increasing Sr concentration.     

Effects of cation- or oxide ion-defect on conductivities of apatite-type La–Ge–O system ceramics

A series of apatite-type La–Ge–O ceramics were prepared and their cation-defect at the 4f+6h sites and oxide ion-defect at 2a site were investigated. In La_xGe₆O_12+1.5x ceramics of x=6–12, the higher conductivities were obtained in the region of apatite composition, La_x(GeO₄)₆O_1.5x−12 (x=8–9.33), and the highest conductivity was achieved for La₉(GeO₄)₆O_1.5 (x=9), where the number of cation (La³⁺) occupying the 4f+6h sites is 9 and the number of oxide ion occupying the 2a site is 1.5. The ceramics with cation- and oxide ion-defects were La_9−0.66xSr_x(GeO₄)₆O_1.5 (x=0–1), La_9−1.33xZr_x(GeO₄)₆O_1.5 (x=0–1), La_9−xSr_x(GeO₄)₆O_1.5−0.5x (x=0–3), La_9−xZr_x(GeO₄)₆O_1.5+0.5x (x=0–1), La_x(GeO₄)_3x−21(AsO₄)_27−3xO_1.5 (x=0–3), La_x(GeO₄)_33−3x(AlO₄)_3x−27O_1.5 (x=0–3), La₉(GeO₄)_6−x (AlO₄)_xO_1.5−0.5x (x=0–3), La₉(GeO₄)_6−x(AsO₄)_xO_1.5+0.5x (x=0–1), La_9.33−xSr_x(GeO₄)₆O_2−0.5x (x=0–1.2) and La_x(GeO₄)_4.5(AlO₄)_1.5O_1.5x−12.75 (x=8.8–9.83), which were prepared by the partial substitution of La³⁺and GeO₄⁴⁻of the basic apatite La₉(GeO₄)₆O_1.5 with Sr²⁺ or Zr⁴⁺ and AlO₄⁵⁻ or AsO₄³⁻. Such substitutions lowered the conductivity of La₉(GeO₄)₆O_1.5. These results were discussed by the electrostatic interaction between Sr²⁺, Zr⁴⁺, AlO₄⁵⁻ or AsO₄³⁻ and oxide ion as a conductive species.     

Evidence of kaon nuclear and Coulomb potential effects on soft K production from nuclei

The ratio of forward K⁺ production on copper, silver and gold targets to that on carbon has been measured at proton beam energies between 1.5 and 2.3 GeV as a function of the kaon momentum p_K using the ANKE spectrometer at COSY-Jülich. The strong suppression in the ratios observed for p_K<200–250 MeV/c may be ascribed to a combination of Coulomb and nuclear repulsion in the K⁺A system. This opens a new way to investigate the interaction of K⁺-mesons in the nuclear medium. Our data are consistent with a K⁺A nuclear potential of V_K⁰≈20 MeV at low kaon momenta and normal nuclear density. Given the sensitivity of the data to the kaon potential, the current experimental precision might allow one to determine V_K⁰ to better than 3 MeV.     

Tuning the multiferroic properties of Pb(Fe1/2Nb1/2)O3 by cationic substitution

A series of substituted lead iron niobate compounds with the general formula Pb²⁺_(1−x)A^Z_x(Fe_{{(1−(2−Z)x)/2}}Nb_{{(1+(2−Z)x)/2}})O₃ (0<x<0.6 and A=La³⁺, K⁺ or Sr²⁺) were prepared by a modified solid-state synthesis. The relative concentrations of Fe³⁺ and Nb⁵⁺ were adjusted to compensate the charge imbalance due to the aliovalent substitution. The dielectric constant and magnetic susceptibilities were studied as a function of temperature. The temperature of the dielectric maximum, T_M, of the substituted compounds decreased linearly with increasing concentration of the substituent ions. The magnetic measurements showed an antiferromagnetic transition at temperatures T_N1 due to the superexchange interactions mediated by Fe–O–Fe and an additional antiferromagnetic-type transition at T_N2. T_N1 linearly increased with the increasing concentration of Fe³⁺ ion at the B-site of ABO₃-type substituted compounds. T_M is shown to be directly dependent on the concentration of the ferroactive Nb⁵⁺ ions at the B-site and Pb²⁺ ions at the A-site.     

Oxygen permeability of La2Cu(Co)O4+δ solid solutions

Formation of the La₂Cu_1−xCo_xO_4+δ solid solutions with orthorhombic K₂NiF₄-type structure was found to be in the range of 0≤x≤0.30 at temperatures above 1270 K. Incorporating cobalt into the copper sublattice of lanthanum cuprate leads to increasing oxygen hyperstoichiometry and decreasing electrical conductivity. Thermal expansion coefficients of the La₂Cu_1−xCo_xO_4+δ (x=0.02–0.30) ceramics at 470–1100 K were calculated from the dilatometric data to vary in the range (12.2–13.2)×10⁻⁶ K⁻¹. Studying the dependence of oxygen permeation fluxes through La₂Cu(Co)O_4+δ on the membrane thickness demonstrated that the oxygen transport at the thickness values below 1 mm is limited by both surface exchange rate and bulk ionic conductivity. Oxygen permeability of the La₂Cu_1−xCo_xO_4+δ solid solutions was ascertained to increase with cobalt concentration at x=0.02–0.10 and to decrease with further dopant additions, indicating a participation of interstitial oxygen in the ionic transport.     

Characterization of Ce1−xZrxO2 thin films prepared by pyrolytic spray technique

It was demonstrated that spray pyrolysis can be used to prepare Ce_1−xZr_xO₂ thin films with x between 0 and 1. The composition of these films was determined by electron probe microanalysis (EPMA), and the crystalline structure by X-ray diffraction (XRD) and Raman spectroscopy (RS). Cyclic voltammetry (CV) was performed in an electrolyte of propylene carbonate with 1 M LiClO₄. Films with high Zr content were incapable of charge exchange of Li⁺ ions. In the contrast, films with high Ce content were found to be able to insert/extract large charge densities of Li⁺ ions. They also remained transparent during Li⁺ intercalation.     

Synthesis and characterization of the Aurivillius phases Bi2 − xPbxSr1 − xNdxNb2O9

The n = 2 Aurivillius phase Bi_{2 − x}Pb_xSr_{1 − x}Nd₂O₉ was successfully synthesized as a ceramic material over the whole range of simultaneous, charge compensated substitution x = 0–1.0. Structural investigations were performed by Rietveld refinement applying different space groups Fmmm and A2₁am, and additionally by X-ray absorption spectroscopy (EXAFS) on the Nd L_III-edge, confirming the accommodation of Nd on the atomic sites of Sr, which implies the substitution of Bi³⁺ by the isoelectronic Pb²⁺. The ferroelectric transition temperature T_c = 270 °C of the substituted powders with x = 0.4 and 1.0 is distinctly reduced compared to the unsubstituted sample with T_c = 450 °C. In temperature resolved powder X-ray diffraction patterns no structural phase transition could be detected.     

Preparation, characterization and oxide ion conductivity in U-substituted Bi4V2O11

A Bi₂V_{1 − x − y}U_xBi_yO_{5.5 + 0.5x − y} solid solution derived from Bi₄V₂O₁₁ has been prepared and characterized with x up to 0.125 for y = 0. Partial substitution of U⁶⁺ for V⁵⁺ in Bi₄V₂O₁₁ leads to the stabilization at room temperature of the high-oxide ion conducting γ-phase, in contrast with other M⁶⁺ dopants which stabilize the β-phase. The lower conductivity in U substituted system compared with BICUVOX.10 is attributed to its higher activation energy. Conductivity values and activation energies of the U substituted phases compare well with Bi₂UO₆.     

Projective and affine connections on S and integrable systems

It is known that the Korteweg–de Vries (KdV) equation is a geodesic flow of an L² metric on the Bott–Virasoro group. This can also be interpreted as a flow on the space of projective connections on S¹. The space of differential operators Δ⁽ⁿ⁾=∂ⁿ+u₂∂ⁿ⁻²++u_n form the space of extended or generalized projective connections. If a projective connection is factorizable Δ⁽ⁿ⁾=(∂−((n+1)/2−1)p₁)(∂+(n−1)/2p_n) with respect to quasi primary fields p_i’s, then these fields satisfy ∑_i=1ⁿ((n+1)/2−i)p_i=0. In this paper we discuss the factorization of projective connection in terms of affine connections. It is shown that the Burgers equation and derivative non-linear Schrödinger (DNLS) equation or the Kaup–Newell equation is the Euler–Arnold flow on the space of affine connections.     

Ca~(2+)掺杂对SmFeO_3的介电、铁磁特性及磁相变温度的影响

采用固相反应法制备Sm_(1-x)Ca_xFeO_3(x=0,0.1,0.2,0.3)样品,研究Ca~(2+)掺杂对SmFeO_3介电性能、铁磁性及磁相变温度的影响.X射线衍射图谱分析表明:所有样品的主衍射峰与SmFe03相符合且具有良好的晶体结构.随着x的增加,SmFeO_3样品的晶粒尺寸由原来的0.5μm逐渐增大到2μm.当f=1 kHz时,Sm_(1-x)Ca_xFeO_3(x=0.1,0.2,0.3)样品的ε_r分别是SmFe03的5倍、3倍和2.6倍,而tgσ增大一个数量级.在3T磁场作用下,SmFe03样品的M-H呈线性,随着x的增加,M-H逐渐趋向饱和,Sm_(1-x)Ca_xFeO_3(x=0.1,0.2,0.3)样品的M_r分别是SmFeO_3的20倍、31倍和68倍.X射线光电子能谱分析表明:Fe~(2+)和Fe3+共存于Sm_(1-x)Ca_xFeO_3样品中,Fe~(2+)/Fe~(3+)比例随着x的增加而增大,证明Ca~(2+)掺杂增加了Fe~(2+)的含量,形成Fe~(2+)—O~(2-)—Fe~(3+)超交换作用,增强SmFe03的铁磁特性.测量了Sm_(1-x)Ca_xFeO_3样品在外加磁场为1000 Oe(1 Oe=79.5775 A/m)的M-T变化关系,观测到其自旋重组温度(T_(SR))和尼尔温度(T_N)分别为438 K和687 K,发现SmFe03样品的T_(SR)和T_N均随着x的增加向低温方向移动,当x=0.3时,自旋重组现象消失.这主要是SmFeO_3样品磁结构的稳定性和Fe~(3+)—O~(2-)—Fe~(3+)及Sm~(3+)—O~(2-)—Fe~(3+)超交换三者共同作用的结果.     

Spectroscopic study of BixEu1−xVO4 and BiyGd1−yVO4 mixed oxides

The mixed oxides Bi_xEu_1−xVO₄ and Bi_yGd_1−yVO₄ crystallize in a zircon-type structure, for 0 <x < 0.6 and 0 < y < 0.64, and in a fergusonite-type structure, for 0.94 < x < 1 and 0.93 < y < 1. A process of competition between the dominant and the constrained effects of the lone-pair 6s² of Bi³⁺ is discussed. The diffuse reflectance spectroscopic studies of these mixed oxides are presented. The observed broad bands are attributed to charge transfer processes and the sharp peaks in the Bi_xEu_1−xVO₄ spectra are ascribed to intra-configurational 4f – 4ftransitions of the Eu³⁺ ion. The broad absorption shift in BiLnVO₄ (Ln : Eu and Gd) compounds to the longer wavelengths range, when Bi is introduced in the LnVO₄ lattice, is ascribed to charge transfer processes in a Bi-VO₄ center and are interpreted assuming a Jahn-Teller effect in the excited state of Bi³⁺. The concept of an internal pressure of Bi³⁺ ions is also used to explain the broad A-band shifts.     

多铁材料Bi1-xCaxFeO3的介电、铁磁特性和高温磁相变

采用溶胶凝胶法制备Bi_1-xCa_xFeO₃ (x=0, 0.05, 0.1, 0.15, 0.2)陶瓷样品. X衍射图谱表明所有样品的主衍射峰均与纯相BiFeO₃相符合且具有良好的晶体结构. 随着x的增大, Bi_1-xCa_xFeO₃样品的主衍射峰由双峰(104)与(110) 逐渐重叠为单峰(110), 当x ≥0.15时, 样品呈现正方晶系结构; 扫描电镜形貌分析可知, 晶粒由原来的0.5 μm逐渐增大到2 μm. Bi_1-xCa_xFeO₃样品介电常数和介电损耗随着x 的增加先增大而后减小. 当f=1 kHz, Bi_0.9Ca_0.1FeO₃ 的介电常数达到最大值, 是BiFeO₃的7.5倍, 而Bi_0.8Ca_0.2FeO₃的介电常数达到最小值, 仅仅是BiFeO₃的十分之一. Bi_1-xCa_xFeO₃样品所呈现的介电特性是由偶极子取向极化和空间电荷限制电流两种极化机理共同作用的结果. 随着Ca²⁺ 的引入, BiFeO₃ 样品的铁磁性显著提高. X射线光电子能谱图表明Fe²⁺和Fe³⁺ 共存于Bi_1-xCa_xFeO₃ 样品中, Fe²⁺/Fe³⁺比例随着Ca²⁺ 掺杂量的增加而增大, 证明Ca²⁺掺杂增加了Fe²⁺的含量, 增强BiFeO₃的铁磁特性. 从M-T曲线观察到BiFeO₃样品在878 K附近发生铁磁相变, 示差扫描量热法测试再次证明BiFeO₃ 在878 K发生相变. Ca²⁺掺杂使BiFeO₃样品的T_N略有变化而T_M基本不变, 其主要原因是Fe-O-Fe反铁磁超交换作用的强弱和磁结构相对稳定.     

Structural and compositional analysis of InBixAsySb(1−x−y) films grown on GaAs(0 0 1) substrates by liquid phase epitaxy

The growth of epitaxial InBi_xAs_ySb_(1−x−y) layers on highly lattice mis-matched semi-insulating GaAs substrates has been successfully achieved via the traditional liquid phase epitaxy. Orientation and single crystalline nature of the film have been confirmed by X-ray diffraction. Scanning electron micrograph shows abrupt interface at micrometer resolution. Surface composition of Bi(x) and As(y) in the InBi_xAs_ySb_(1−x−y) film was measured using energy dispersive X-ray analysis and found to be 2.5 and 10.5 at.%, respectively, and was further confirmed with X-ray photoelectron spectroscopy. Variation of the composition with depth of the film was studied by removing the layers with low current (20 μA) Ar⁺ etching. It was observed that with successive Ar⁺ etching, In/Sb ratio remained the same, while the As/Sb and Bi/Sb ratios changed slightly with etching time. However after about 5 min etching the As/Sb and Bi/Sb ratios reached constant values. The room temperature band gap of InBi_0.025As_0.105Sb_0.870 was found to be in the range of 0.113–0.120 eV. The measured values of mobility and carrier density at room temperature are 3.1×10⁴ cm² V⁻¹ s⁻¹ and 8.07×10¹⁶ cm⁻³, respectively.     

Fixed charge and interface traps at heterovalent interfaces between Si(1 0 0) and non-crystalline Al2O3–Ta2O5 alloys

Characterization by Auger electron spectroscopy (AES) and Fourier transformation infrared spectroscopy (FTIR) confirms (Ta₂O₅)_x(Al₂O₃)_1−x alloys are homogeneous pseudo-binary alloys with increased thermal stability with respect to end member oxides, Ta₂O₅ and Al₂O₃. Capacitance–voltage (C–V) and current density–voltage (J–V) data as a function of temperate show that the Ta d-states of the alloys act as localized electron traps, and are at an energy approximately equal to the conduction band offset of Ta₂O₅ with respect to Si.     

Material design of new lithium ionic conductor, thio-LISICON, in the Li2S–P2S5 system

A new lithium ionic conductor of the thio-LISICON (LIthium SuperIonic CONductor) family was found in the binary Li₂S–P₂S₅ system; the new solid solution with the composition range 0.0≤x≤0.27 in Li_3+5xP_1−xS₄ was synthesized at 700 °C and characterized by X-ray diffraction measurements. Its electrical and electrochemical properties were studied by ac impedance and cyclic voltammetry measurements, respectively. The solid solution member at x=0.065 in Li_3+5xP_1−xS₄ showed the highest conductivity value of 1.5×10⁻⁴ S cm⁻¹ at 27 °C with negligible electronic conductivity and the activation energy of 22 kJ mol⁻¹ which is characteristic of high ionic conduction state. The extra lithium ions in Li₃PS₄ created by partial substitution of P⁵⁺ for Li⁺ led to the large increase in ionic conductivity. In the solid solution range examined, the minimum conductivity was obtained for the compositions, Li₃PS₄ (x=0.0 in Li_3+5xP_1−xS₄) and Li₄P_0.8S₄ (x=0.2 in Li_3+5xP_1−xS₄); this conductivity behavior is similar to other thio-LISICON family with the general formula, Li_xM_1−yM_y′S₄ (M=Si, Ge, and M′=P, Al, Zn, Ga, Sb). Conduction mechanism and the material design concepts are discussed based on the conduction behavior and the structure considerations.     

Non-Fermi liquid regimes in U1−xMxPd2Al3(M=Y,Th)

The temperature-composition (T–x) phase diagram and NFL characteristics in the electrical resistivity ρ(T), specific heat C(T), and magnetic susceptibility χ(T) at low temperatures for the systems U_1−xM_xPd₂Al₃ (M=Y,Th) are described. The T–x phase diagram, the NFL characteristics, and the underlying mechanism for the NFL behavior are distinctly different for M=Y³⁺ and Th⁴⁺, apparently reflecting the difference in valence of the M atom substituents, and suggesting that U is tetravalent in these two systems.     

The transition probability of DJ-F0 and hole-burning quantum efficiency in the SryBa1−yFCl0.5Br0.5:Sm system

We report the changes of the ⁵D_J-⁷F₀(J = 2, 1, 0) transition probability with composition y and its effect on the hole burning quantum efficiency in the Sr_yBa_1−yFCl_0.5Br_0.5:Sm²⁺ system. We observed that the ⁵D_J-⁷F₀ transition probability increases with the increase of Sr concentration. This result is attributed to the reduction of the energy separation between the ⁵D_J level and the 4f5d bands, which makes the electron wave functions of ⁵D_J states mix further with that of the 4f5d states. The dependence of the hole-burning quantum efficiency on the 5D_J-⁷F₀ transition probability was derived by the dynamical equations of the spectral hole burning of divalent samarium. Furthermore, the hole-burning experiments in SrFCl_0.5Br_0.5:Sm²⁺ and BaFCl_0.5:Sm²⁺ were performed under the same conditions. The experimental results present that the hole-burning quantum efficiency of SrFCl_0.5Br_0.5:Sm²⁺ is higher than that of BaFCl_0.5Br_0.5:Sm²⁺.     

Shaped crystal growth and scintillating properties of Yb:(Gd,Lu)3Ga5O12 solid solutions

Shaped single crystals of (Lu_xGd_1−x)₃Ga₅O₁₂ (0.0x1.0) and (Yb_0.05Lu_xGd_0.95−x)₃Ga₅O₁₂ (0.0x0.9) were grown by the modified micro-pulling-down method. Continuous solid solutions with garnet structure and a linear compositional dependency of crystal lattice parameter in the system Yb:(Gd,Lu)₃Ga₅O₁₂ are formed. Measured optical absorption spectra of the samples show 4f–4f transitions related to Gd³⁺ ion at 275 and 310 nm, and also an onset of charge transfer transitions from oxygen ligands to Gd³⁺ or Yb³⁺ cations below 240 nm. A complete absence of Yb³⁺ charge transfer luminescence under X-ray excitation in any of the investigated samples was explained by the overlapping of charge transfer absorption of Yb³⁺ by that of Gd³⁺ ions. For specific composition of Lu_1.5Gd_1.5Ga₅O₁₂ an intense defect-host lattice-related emission, which achieve of about 40% integrated intensity compared with Bi₄Ge₃O₁₂, was found.     

Ising spin glass on a D = 3 hierarchical lattice: Effects of tailed coupling distributions

Within a real-space renormalization-group framework, we approach the cubic lattice through a D = 3 diamond-like hierarchical lattice. The model is a standard, nearest-neighbor, Ising spin glass with coupling constants {J_ij} distributed according to the family of continuous probability distributions P_q(J_ij) ∝ 1/[1 + (q − 1)J_ij²/2J²]^{1/(q − 1)} (if 1 + (q − 1) J_ij²/2J² > 0, and zero otherwise; q ). Such distributions, which arise naturally in the treatment, within the recently proposed nonextensive thermostatistics, of anomalous diffusion, reproduce the usual, Gaussian case, for q → 1. Moreover, they present a second moment J_ij² proportional to (5 − 3q)⁻¹ for q < 5/3, diverging for q ≥ 5/3, but keeping a finite width at midheight. In the limit q → 3, P_q(J_ij) collapses with the abscissa, and so the width at midheight diverges. We compute the q-dependence of the spin-glass critical temperature T_c. We show numerically that T_c does not scale with J_ij^21/2 (contrary to the usual belief), but rather with the width at midheight of P_q(J_ij). Our results suggest that T_c vanishes as −1/q when q → −∞; furthermore, we verified that T_c diverges exponentially when q approaches 3 from below.     

(Sr_(1-1.5x)Y_x)TiO_3模拟固化~(90)Y的稳定性研究

为了研究钙钛矿结构的SrTiO_3固化Y~(3+)(~(90)Y的模拟物)的化学稳定性,以Sr(NO_3)_2,TiO_2及Y_2O_3粉体作为原料,按照化学计量比Sr_(1-1.5x)Y_xTiO_3(0≤x≤0.12)设计配方,采用高温固相法制备一系列固化体.利用X射线衍射、扫描电镜和Raman对制备固化体的物相、结构和微观形貌进行分析表征,并对其抗浸出性能进行了研究.结果表明:当x0.08时,固化体为单一物相,当x≥0.08时,固化体中出现部分烧绿石相;固化体中的Sr~(2+),Y~(3+)的浸出浓度随浸泡时间延长而增大,在浸泡42d时,Sr~(2+)的最大浸出浓度为0.004μg·mL~(-1),Y~(3+)的最大浸出浓度为0.02μg·mL~(-1).