Transflective blue-phase liquid crystal display with dielectric protrusion

A transflective blue-phase liquid crystal display (TRBP-LCD) with dielectric protrusions is proposed. The dielectric protrusions are fixed on the in-plane-switching (IPS) electrodes. The potential drops very slowly in the dielectric protrusions, thus the total field penetrating depth is significantly enlarged and the operating voltage is lowered, which helps suppressing electrostriction effect. The different heights of the dielectric protrusions in the transmissive (T) and reflective (R) regions contribute to balance the optical phase retardation between the T and R regions. The simulation results verify that the proposed TRBP-LCD can achieve low operating voltage and good sunlight readability.     

A transflective blue-phase liquid crystal display with alternate electrodes

A transflective polymer-stabilised blue-phase liquid crystal display (BP-LCD) with alternate electrodes is proposed. The alternate electrodes are composed of right triangle electrodes and slanted electrodes. To balance the optical phase retardation between the transmissive (T) and reflective (R) regions, the legs of the right triangle electrodes in the T region generate uniform horizontal electric field, the hypotenuses of the right triangle electrodes and slanted electrodes in the R region generate uniform oblique electric field. As result, the T and R regions obtain the same optical phase retardation. This display exhibits reasonably high transmittance, low operating voltage, wide viewing angle and well-matched voltage-dependent transmittance and reflectance curves.     

High-transmittance polymer-stabilised blue-phase liquid crystal display with double-sided protrusion electrodes

A polymer-stabilised blue-phase liquid crystal display (PSBP-LCD) with double-sided protrusion (DSP) electrodes structure is proposed. The oblique electric field between the protrusion electrodes inside both top and bottom glass substrates can induce more isotropic-to-anisotropic transition in the polymer-stabilised blue-phase liquid crystal (PS-BPLC) medium through Kerr effect than using the in-plane switching electrode. For the same electrode width, spacing and cell gap, the transmittance of PSBP-LCD with the DSP electrodes is ～29% higher than that using the IPS electrode.     

A transflective polymer-stabilised blue-phase liquid display with partitioned wall-shaped electrodes

A transflective polymer-stabilised blue-phase liquid crystal display (BP-LCD) with partitioned wall-shaped electrodes is proposed. The etched polymer layer contributes to balance the optical phase retardation between transmissive (T) and reflective (R) regions. The partitioned wall-shaped electrodes generate uniform and horizontal fields throughout the entire LC layer to induce isotropic-to-anisotropic transition in the blue-phase liquid crystal medium through Kerr effect. Consequently, the accumulated phase retardation along beam path is large, resulting in reasonable low operation voltage and high transmittance both in T and R regions. This approach enables the BP-LCD to be addressed by amorphous silicon thin-film transistors. Moreover, it exhibits wide viewing angle and a well-matched gamma curve.     

Mixed-field-switching liquid crystal mode using in-plane and fringe fields self-adjusted by bottom floating electrode for transmittance enhancement

We demonstrate a liquid crystal (LC) mode switched by mixed electric fields of in-plane and fringe fields, which are self-adjusted by adopting a bottom floating electrode for enhanced electro-optical properties. In our LC mode structure, conventional in-plane switching (IPS) electrodes are formed as pixel electrodes and common electrodes on an insulating layer and floating electrodes that are patterned per the sub-pixels. When the areas of the pixel and common electrodes are identical, the voltage of the bottom floating electrode is spontaneously determined to be half the value of the pixel voltage, which ideally generates symmetric fringe fields with both pixel and common electrodes. Due to the in-plane fields additionally generated between the pixel and common electrodes, the proposed LC structure operates by mixed-field switching (MFS), which shows higher transmittance than fringe-field switching (FFS) and IPS LC modes. Transmittance of the conventional FFS and IPS LC modes is highly sensitive to the in-plane electrode’s width (w) and spacing (l) condition, but the proposed MFS LC mode shows good transmittance without degradation with large variations of the in-plane electrode’s spacing-to-width ratio (l/w).     

Blue-phase liquid crystal display with high dielectric material

A blue-phase liquid crystal display (BPLCD) with low operating voltage and high transmittance is demonstrated by using a high dielectric material, which is used as an insulation layer or protrusion fixed on the pixel and common electrodes in in-plane switching (IPS) mode. The operating voltage is reduced to about 14 V and the transmittance is improved for the BPLCD with high dielectric constant protrusion. Compared with the conventional protrusion electrode structure, the proposed protrusion can make manufacturing process simple and easy because the electrode has no complex shape. The results will be significant in designing optimal BPLCDs.     

Low voltage and high transmittance transflective blue-phase liquid crystal display with opposite polar electrodes

A single-cell-gap transflective polymer-stabilised blue-phase liquid crystal display with opposite polar pixel electrodes on an etched substrate is proposed. In the proposed structure, the space between common electrodes is adopted as transmissive region, and the space above the common electrode is adopted as reflective region. By optimising the electrode parameters of the transmissive and reflective regions, well-matched voltage-dependent transmittance and reflectance curves can be obtained. In addition, the device has good performances of low operating voltage (~3.2 V), high optical efficiency and a wide viewing angle.     

A liquid crystal cell with double-side protrusion electrodes for fast response and low-voltage operation

We propose a homogeneously aligned liquid crystal (LC) cell with double-side protrusion electrodes for fast response and low-voltage operation. In the proposed device, both the bottom and top substrates have pixel electrodes to generate the fringe electric field. Because the penetration depth of the electric field is increased owing to the protrusion electrodes, the operating voltage is very low and the turn-on time is dramatically reduced compared with the conventional in-plane switching (IPS) mode. Moreover, LC molecules anchored strongly to the penetrated protrusion electrodes on both substrates exert a strong restoring force, resulting in a fast turn-off time. We found that the total response time of the LC cell with the proposed structure is three times faster than that of the conventional IPS mode.     

A simple transflective liquid crystal display with composite dielectric layer

ABSTRACT

A simple transflective liquid crystal display with a vertically aligned cell using a composite dielectric layer is demonstrated. The top substrate has a top planar common electrode, two transparent dielectric layers with different dielectric constants are coated on the bottom planar pixel electrode to generate linearly varying electric potential from the transmissive region (T region) to the reflective region (R region), while two bumpy reflectors are coated under the bottom substrate. In this device, with the composite dielectric layer, the common and pixel electrodes generate a strong electric potential in the T region and a relatively weak electric potential in the R region. Consequently, the T and R regions accumulate the same electro-optical characteristics. The simulation results show that the display exhibits reasonably low operating voltage, high optical efficiency and well-matched voltage-dependent transmittance (VT) and reflectance (VR) curves. Besides, the driving mode and the fabrication process of the transflective liquid crystal display are fairly simple and it is suitable for mobile applications.     

Low voltage blue-phase liquid crystal display with insulating protrusion sandwiched between dual-layer electrodes

In order to lower the operating voltage of blue-phase liquid crystal display (BPLCD), a BPLCD with insulating protrusion, which is sandwiched between dual-layer electrodes, is proposed. There are four electrodes in this structure; thus, we investigate different driving methods to find a proper driving method. The effect of protrusion’s dielectric constant on operating voltage of the proposed BPLCD is explored under various electrodes’ parameters. As a result, the operating voltage of the proposed BPLCD with protrusion’s dielectric constant of 1,000 is 9.8 V, which is reduced by ~ 4.67× compared with that of conventional in-plane switching (IPS) BPLCD (45.8 V). Moreover, the zigzag electrode structure is adopted to reduce the large off-axis image distortion index. Besides, the azimuth distortion index is defined to describe the gamma shift between the minimum and maximum gamma shift curves at a certain polar angle. The results show that the off-axis image distortion index can be reduced to 0.0834, the azimuth distortion index is 0.0810 and the viewing cone of contrast ratio larger than 1,000:1 is over 50ºas the zigzag proposed BPLCD is used.     

Advanced wide viewing angle technology in liquid crystal display modes

This paper reviews the advanced optical configurations for in-plane switching (IPS) and vertical alignment (VA) liquid crystal (LC) cells with wide viewing angle in a visible wavelength range. Optical compensation and optimisation to eliminate off-axis light leakage in the dark state is performed on a Poincaré sphere using the trigonometric and the Muller matrix method. By optimising the wavelength dispersion of used optical retardation films, we could achieve wide-view characteristics for both the IPS and VA LC cells. In addition, we show the advanced wide-view technology for a reflective LC mode.     

Crucial influence of polar alignment on the dynamics of in-plane switching cells

We investigated theoretically the dynamics of in-plane switching (IPS) cells with small pretilt angle and found that the liquid crystal director variation causes optical bounce after switching on an applied voltage. We analysed the behaviour of the director by computer simulation and found that the optical bounce occurs during the rising period with the normal twist and tilt angles of the directors in the IPS cell in the absence of the field-induced backflow effect. Pretilt angle is the source of this optical bounce.     

Crucial influence of polar alignment on the dynamics of in-plane switching cells

We investigated theoretically the dynamics of in-plane switching (IPS) cells with small pretilt angle and found that the liquid crystal director variation causes optical bounce after switching on an applied voltage. We analysed the behaviour of the director by computer simulation and found that the optical bounce occurs during the rising period with the normal twist and tilt angles of the directors in the IPS cell in the absence of the field-induced backflow effect. Pretilt angle is the source of this optical bounce.     

Low-gamma shift asymmetrical double-side blue-phase liquid crystal display

ABSTRACT

A single-domain blue-phase liquid crystal display (BPLCD), which has asymmetrical double-side electrode structure, is proposed to reduce gamma shift. Firstly, the electro-optical curve and gamma shift of the proposed BPLCD are discussed under the comparison with conventional in-plane switching (IPS) BPLCD. And then, its gamma shift is investigated under various conditions. Compared with the conventional IPS-BPLCD, the operating voltage can be reduced by ~31%, and the transmittance is increased by ~6%. The indistinguishable gamma shift can be obtained under various electrodes’ sizes, when the cell gap is appropriate. The results also indicate that if the electrodes’ height and Kerr constant of BPLC increase, the operating voltage can be further reduced (only 9.6 V in this work), and the gamma shift almost do not change. Moreover, a certain misalignment between the top and bottom glasses are permitted, which is good for reducing the fabrication difficulty. In terms of viewing angle, the proposed BPLCD has an average contrast ratio of ~5000:1, and the gamma shifts at full viewing angles are all indistinguishable.     

2,3-二氟代联苯类液晶化合物的合成与性能

以4-烷基环己基甲酸和4-溴-2,3-二氟苯酚为原料,经格氏、黄鸣龙还原、碘代、芳基硼酸化、Suzuki偶联、威廉姆逊和酯化等反应,合成24种侧向二氟取代联苯类液晶化合物,总收率4.2%～8.7%,产物的分子结构经核磁（1H NMR,13C NMR）、红外和质谱确认。 利用差示扫描量热仪（DSC）和偏光显微镜（POM）对目标化合物进行了液晶性能测试。 结果表明,烷基链的长度不仅影响化合物的熔点和清亮点,还影响液晶相态变化;端烯可以降低化合物的熔点（降低了3.7 ℃）,提高清亮点（提高了24.8 ℃）,拓宽向列相区间（由54.1 ℃拓宽到82.6 ℃）;酯基的引入可以提高清亮点,有助于消除近晶相。 该系列化合物在垂直取向(VA)和平面转换(IPS)显示模式中具有潜在的应用前景。     

Suppressing pretilt angle for enhancing black quality in diagonal viewing angle of homogenously aligned liquid crystal display

The diagonal viewing angle light leakage in a black state of in-plane switching (IPS) liquid crystal display (LCD) associated with pretilt angle has been investigated. The mechanical rubbing process with a cloth causes relatively high pretilt angle in the homogenously aligned liquid crystals (LCs) so that the tilted LC director results in increase of a light leakage in a black state at diagonal viewing angles. In this study, we theoretically estimated using classical optic theory how the light leakage in a black state at diagonal viewing angle is associated with the pretilt angle and also proposed an effective method to reduce the pretilt angle from 1.5° to 0° in rubbed IPS LCD by utilising polymer stabilisation. With this approach, we could successfully acquire a better black quality in all viewing angles as compared with normal IPS LCD.     

Optimisation of alignment materials for minimising residual retardation in in-plane switching liquid crystal display

The light leakage in a black state of in-plane switching (IPS) liquid crystal display (LCD) associated with rubbing process has been investigated. The mechanical rubbing process with a cloth caused orientation disorders in the liquid crystal directors and these partial orientation disorders result in residual retardations of the IPS LCD, causing the light leakages at the black state. In this study, we theoretically estimated how the light leakage is associated with the rubbing uniformity using 2 × 2 Jones matrix equation and also experimentally confirmed how it is associated with structural properties of the alignment layer. The light leakage was clearly reduced in the alignment layer with reduced crystallinity and flexibility.     

Reflective blue phase liquid crystal displays with double-side concave-curved electrodes

Reflective blue phase liquid crystal display (BPLCD) is a promising candidate for field sequential colour displays with reflective liquid-crystal-on-silicon (LCoS). However, the issue of high operation voltage still hinders its widespread applications. We propose a reflective BPLCD with double-side concave-curved electrode and research its operation voltage and electro-optic characteristics in simulation, which is compared to the transmissive mode. The effect of double-side electrodes on horizontal electric field and operation voltage is analysed. The improvement of concave-curved electrodes on reflectance is discussed. A reflective BPLCD has two times the optical path difference compared to the transmissive mode. By using double-side concave-curved electrodes, the reflectance increased by 23% and the operation voltage reduced by 32% compared to the traditional in-plane switching mode. This work enables BPLC to be integrated with reflective LCoS.     

Viewing angle characteristics of a homogeneously aligned two-domain liquid crystal cell with an inter-digitated electrode

The in-plane switching (IPS) mode in liquid crystal displays is known to exhibit a wide viewing angle. However, since the LC director rotates in one direction in the plane, devices with a single domain exhibit both a colour shift depending on the viewing angle, and greyscale inversion at specific angles especially at low grey levels. This has been improved by wedge shaped electrodes so that fields in two directions exist inside a pixel, causing the LC molecules to rotate in opposite directions to compensate each other; this acts as a virtual two domains structure. Nevertheless, the colour shift still exists to some extent, especially at low grey levels. In this paper, we propose a realistic two-domain IPS mode that exhibits a minimized colour shift at all grey levels on changing the viewing direction. In this device, the LC molecules are initially aligned in two directions orthogonal to each other, and two field directions exist perpendicular to each other. We have performed device simulations with respect to viewing angle characteristics, and found that IPS devices with a real two-domain structure reduce the variation of the retardation more effectively, when the viewing direction changes.     

A transflective and viewing angle controllable blue-phase liquid crystal display

A polymer-stabilised blue-phase liquid crystal display (PSBP-LCD) with double-side in-plane switching (DS-IPS) electrode structure is proposed. This structure shows the transflective characteristics because the bottom electrodes are made by aluminium material. For transflective displays, it exhibits a well-matched voltage-dependent transmission and reflection curves through designing the width and gap of the top electrodes. When a bias voltage is applied on the top electrodes, it exhibits as a good viewing angle controllable display.