Electro-optics of polymer-stabilised blue phase liquid crystal in in-plane switching mode

In the present work, polymer-stabilised blue phase liquid crystal ***(PS-BPLC) that exhibit the blue phase (BP) in a temperature range of 312.15 K to 298.15 K has been prepared. The textural and electro-optic studies were performed in the BP range using an in-plane switching (IPS) cell. Platelet-type textures of cubic BP having an average domain size of ~12 µm were observed. The on-state voltage increased with increasing the temperature due to reduced value of the Kerr constant. Further, the hysteresis was found to be reduced from 19.2% to 5.1% by operating the PS-BPLC sample cell at an elevated temperature.     

Effects of thiophene-based mesogen terminated with branched alkoxy group on the temperature range and electro-optical performances of liquid crystalline blue phases

A series of symmetrically thiophene-based bent-shaped molecules with branched terminal was synthesised and characterised. Then, their effects as dopants on the blue phase (BP) range of the chiral nematic liquid crystal (N*LC) host were investigated. It was found that the bent-shaped dopants with branched terminal had better miscibility in LC host than the bent-shaped dopants with straight terminal, and contributed to induce BP and enhance the BP temperature range, with the maximum BP temperature range about 20.4°C. Besides, the electro-optical (E-O) performances of the blue phase liquid crystal doped with Th-BC6 (a bent-shaped dopant with the widest induced BP range in N*LC) were also explored. It was found that the drive voltage reduced first and then increased with the doping amount of Th-BC6 increasing. When the doping amount of Th-BC6 was about 15 wt%, the hysteresis could be strikingly reduced.     

The effect of polymerizable surfactants on morphology and electro-optical of PDLCs films based on epoxy acrylate system

Polymer dispersed liquid crystals (PDLCs) have been extensively studied for various excellent electro-optical applications. The anchoring interaction of liquid crystals (LCs) molecules on the surface of the polymer cavity surrounding an LCs droplet has a crucial effect on the electro-optical performance of the PDLCs. The effect of polymerizable surfactants on the electro-optical properties of PDLCs films was studied in detail. The active double bonds were polymerized with prepolymer to stabilize the performance of polymer matrix. The experimental results showed that polymerizable surfactants could effectively reduce the driving voltage. The speed of polymerization was monitored by real-time transmittance. The electro-optical properties of PDLC films were measured by Polarimeter (PerkinElmer Model 341). The driving electric field was reduced from 3.9 V/μm to about 2.8 V/μm for doping undec-10-enoic acid at curing temperature 80?°C. The surfactants containing polymerizable functional groups, polarity, and alkyl chain weakened the surface anchoring between LCs droplets and polymer interface. The morphologies of PDLCs films were also investigated by polarizing optical microscopy (POM) and Fourier transform infrared (FTIR) images. The LC droplets were encapsulated by polymerizable surfactant according to FTIR images.     

Single electro-optic curve for RGB colours in blue-phase liquid crystal display

The double-layer penetration electrode structure is proposed to obtain the low-operating voltage blue-phase liquid crystal display (BPLCD) with single electro-optic curve for red-green-blue (RGB) colours in every pixel, which is more suitable for the field-sequential-colour display. The different influences of electrode’s parameters and driving methods on the electro-optical properties of the proposed BPLCD are investigated. The results demonstrate that the operating voltage can be reduced from 53.80 V to 23.00 V for red colour. Besides, the coincident voltage-dependent transmittance curves for RGB colours are obtained by adjusting the applied voltage of sub-electrode. Thus, RGB lights can pass through every pixel with single electro-optic curve, which is good for resolution enhancement and single gamma driving. Besides, the maximum gamma shift of the proposed BPLCD is less than 0.1099 at 60° polar angle for the red colour, and the gamma shift difference between red and blue colours is only 0.0542. If the high dielectric constant material is used as the protrusion, the operating voltage can be further decreased, which is close to that of the BPLCD with wall-shaped electrode structure.     

Enhanced wavelength-sensitivity of volume holographic grating with dual-photoinitiation system in polymer-dispersed liquid crystal

We propose a method to improve the wavelength-sensitivity of a volume holographic grating by mixing dual-photoinitiation dopants, namely, rose bengal (RB)/N-phenylglycine (NPG) system and methylene blue (MB)/p-toluenesulfonic acid (PTSA) system, which enable the fabrication of gratings upon both green and red light illumination. The RB/NPG green light photoinitiation system is chosen in combination with the red-active MB/PTSA system because RB and MB absorb light near 567 and 665 nm independently. In this case, the holographic gratings, recorded in polymer-dispersed liquid crystal, can be fabricated simultaneously by two different visible laser lights with an output wavelength of 532 and 632.8 nm. The electro-optical performances of the gratings exposed upon 532 and 632.8 nm have been implemented: the diffraction efficiencies (DE) are 75% and 57% respectively when the exposure time is optimised to 2 min and 17 min; the threshold voltage is approximately 2.9 V/μm. The enhanced wavelength-sensitivity of holographic gratings allows for the storage of three-dimensional (3D) images on the same hologram plate, and these 3D images are easily reconstructed by both red and green light.     

Improvement of the electro-optical properties of nematic liquid crystals doped with strontium titanate nanoparticles at various doping concentrations

ABSTRACT

In this study, we doped homogenous aligned nematic liquid crystal (NLC) systems with strontium titanate (SrTiO₃) nanoparticles (NPs), and investigated the impact of doping concentration on the NLC’s electro-optical (EO) properties. SrTiO₃ NP-doped NLC cells maintained a high optical transmittance of 77.51% to 78.41% compared to pure NLC cells (78.09%). At a 0.1 wt.% SrTiO₃ NP doping concentration, twisted-nematic (TN)-LC cells exhibited enhanced EO performance, with a reduced threshold voltage from 1.70V to 1.61V and a shorter response time from 17.03 ms to 10.66 ms without optical defects and degradations. We also observed an improvement in thermal endurance for doping concentrations of 0.05 and 0.1 wt.%.     

Effect of rGO on polymer-dispersed liquid crystal fabricated by RAFT polymerisation

In this study, we demonstrated that doping polymer matrix with a small amount of reduced graphene oxide (rGO) component (0.05–0.2%) had significant influence on the polymerisation kinetics and electro-optical performances of polymer-dispersed liquid crystal films (PDLCs) fabricated with macro reversible addition-fragmentation chain transfer agents. The effects of rGO content were studied in terms of morphology, compound viscosity, polymer conductivity, polymerisation kinetics and driving voltage of PDLCs. The results exhibited that higher rGO content increased the compound viscosity and the entire process proceeded slowly. Furthermore, the addition of rGO increased the polymer conductivity and local electric field, and reduced the saturation voltage as well as the threshold voltage from 27.3 to 19.5 V and 13.2 to 6.41 V, respectively.     

The effect of emitter geometry on lateral field emission diodes fabricated by AFM-based electrochemical nanolithography

Lateral field emission diodes were successfully fabricated using atomic force microscopy (AFM)-based electrochemical nanolithography and tetramethyl ammonium hydroxide (TMAH) wet etching method. Field emission (FE) current of the silicon emitter cathode was measured as a function of the applied anode voltage under vacuum environment. For narrowed nanogaps from 55 to 35 nm, the turn-on voltage was decreased from 21 to 16 V. The turn-on voltage of the 35 nm gap was reduced from 16 to 8 V by changing the curvature radius of the cathode tip. The sharper emitter had the lowest turn-on voltage, largest field-enhancement factor, and good stability, which were attributed to the small emitter radius at the cathode tip and very slight changes in the local field factor. These results indicate that the diodes fabricated using this technique had the lowest value of turn-on voltage ever reported for lateral silicon FE devices.     

Effects of crosslinking agent/diluents/thiol on morphology of the polymer matrix and electro-optical properties of polymer-dispersed liquid crystal

To study effects of the crosslinking agent/diluents/thiol on morphology of the polymer matrix and the electro-optical properties of polymer-dispersed liquid crystal (PDLC) films, samples were prepared by ultraviolet (UV)-initiated polymerisation. Due to the interaction between thiol–acrylate reaction and acrylate monomers polymerisation, the sample compositions were the foremost determinant to the microstructures which in turn played an essential role on the electro-optical properties of the PDLC films. With the increasing content of the crosslinking agent, the LC droplet size decreased, while the thiol had a contrary effect on the LC droplet size. It was demonstrated that the superior properties of the low-driven voltage (37.2 V), the high contrast ratio (148.2), the short response time (14.9 ms) and the high saturation transmittance (86.6%) could benefit from a novel microstructure which had a dense surface and meshes with microspheres attached. It was of great significance for the optimisation and the potential applications of the PDLC films.     

Electro-optical properties of carbon nanotube-doped polymer-stabilised blue phase liquid crystal IPS cell

Carbon nanotube (CNT)-doped polymer-stabilised blue phase (PSBP) liquid crystal cells driven by an in-plane field are fabricated. Their electro-optical properties are investigated for both single-wall and multiwall CNT dopants. A small amount of CNT dopants in PSBP liquid crystals leads to broadening the blue phase temperature range over 42°C and stabilising the reflection wavelength against temperature changes. A lower Kerr constant and threshold voltage are obtained for a higher CNT concentration. Higher CNT concentrations lead to an increase in the elastic constant; therefore, the rise time of CNT-doped PSBP liquid crystal cells increases and decay time decreases.     

Image analysis method to study electro-optic parameters of nematogens

This paper demonstrated the image analysis technique for the investigation of electro-optic behaviour of homogeneously aligned nematic liquid crystals p-n alkyl benzoic acids (nBA) where n = 5 and 6 under the application of direct current (DC) electric field. Textures of the liquid crystals in the mesophase region of particular temperature were recorded in three monochromatic image planes at the wavelengths of 635 (red), 530 (green) and 475 nm (blue) as a function of applied DC voltage. Electro-optic properties such as transmittance, birefringence, phase retardation and contrast ratio were measured by analysing the optical intensities of the recorded textures using MATLAB software. The changes in the textural features and formation of new textures as a function of voltage provided information for better understanding of the electro-optic characteristics of liquid crystals. Results of this study were compared with the data of the other standard techniques: laser source (633 nm) experiment and United Detector Technology (UDT) sensor of model UV- 35P silicon photo diode which uses white light as source and filters the wavelengths using three colour filters of wavelengths 635, 530 and 475nm.     

Inducing monodomain blue phase liquid crystals by long-lasting voltage application during temperature variation

We demonstrate a new successful technique for inducing a monodomain in blue phase (BP) liquid crystals (BPLCs). By application of an AC voltage during the cooling or heating of the material into the BP temperature range, a fairly homogeneous BP area was obtained, compared to the case without voltage. We determined that applying a voltage of 3.3 V/µm was very effective in terms of obtaining a monodomain: for four of the seven different applied cooling/heating rates an area ratio of more than 99% was obtained for one particular BP orientation. This study describes a successful and replicable technique to make a BPLC monodomain, which is important for the development of BPLCs and other applications.     

Thermal and electro-optical properties of cerium-oxide-doped liquid-crystal devices

Doping with cerium (IV) oxide (CeO₂) nanoparticles can significantly enhance the thermal stability and electro-optical (EO) properties of nematic liquid crystal (NLC) systems. Thermal stability was improved without aggregation and reduction of transmittance by adding CeO₂ nanoparticles in a liquid crystal medium. In particular, the EO properties greatly improved in CeO₂-dispersed NLC cells. The threshold voltage reduced from 3.027 to 2.279 V and the response time decreased from 13.097 to 9.970 ms with increased CeO₂ nanoparticles in the NLC cells. The improved properties of liquid crystals doped with CeO₂ nanoparticles depend on the anchoring energy and the electric field of the CeO₂-dispersed liquid crystal displays.     

Novel hybrid process for the conversion of microcrystalline cellulose to value-added chemicals: part 2: effect of constant voltage on product selectivity

In this study, electrochemical degradation of microcrystalline cellulose (MCC) under hot-compressed water was investigated via application of constant voltage on reaction medium. Constant voltage ranges from 2.5 to 8.0 V was applied between anode (Titanium) and cathode (reactor wall). As an electrolyte and proton source 5–25 mM of H₂SO₄ was used. Reactions were carried out in a specially designed batch reactor (450 mL) made of T316 for 240 min at temperature of 200 °C.MCC decomposition products such as glucose, fructose, furfural, 5-HMF and levulinic acid were detected and quantified by High Performance Liquid Chromatography (HPLC). In the absence of electrolyte, applied voltage (2.5 and 4.0 V) decreased the total organic carbon (TOC) yield, in contrast at 8.0 V, TOC yield increased to 13%. Application of 8.0 V in hydrothermal conditions alter MCC decomposition pathway selectively to furfural (15%). Addition of electrolyte (5 mM, H₂SO₄) and application of 2.5 V potential increased TOC (54%) and changed the decomposition pathway in favor of 5-HMF (30%) and levulinic acid (21%). The structural changes in solid residues of electrochemically reacted MCC was analyzed by Fourier Transform Infrared Spectroscopy (FTIR) and found that MCC particles functionalized by carboxylic acid and sulfonated groups by the application of constant voltage to reaction medium. In the presence of electrolyte, under certain voltage (2.5 V), functionalization of solid particles became more obvious in FTIR spectrum results. Therefore, change in the selectivity values of degradation products were conducted with the functionalization of MCC particles due to applied voltage under sub-critical conditions.     

Liquid crystal alignment properties of 2-naphthoxymethyl-substituted polystyrenes

The liquid crystal (LC) alignment properties of LC cells fabricated with films of 2-naphthoxymethyl-substituted polystyrenes with different contents of naphthoxymethyl side groups were investigated. The polymer films exhibited good optical transparency in the visible light region (400–700 nm). The LC cells made from the unrubbed films of polymers having more than 57 mol%?of 2-naphthoxymethyl containing monomeric units showed homeotropic LC alignment with a high pretilt angle of about 90^o. Good electro-optical characteristics, such as the threshold voltage, response time, voltage holding ratio and residual DC voltage were observed for the LC cells fabricated with the polymer having 100 mol%?of 2-naphthoxymethyl containing monomeric units as an LC alignment layer.     

Effects of thiol monomers on the electro-optical properties of polymer-dispersed liquid crystal films prepared by nucleophile-initiated thiol-ene click reaction

ABSTRACT

Nucleophile-initiated thiol-ene click reaction is a highly novel and efficient method of preparing polymer-dispersed liquid crystal (PDLC) films. The effects of thiol monomers on the electro-optical properties of PDLC films prepared by nucleophile-initiated thiol-ene click reaction were investigated in this work. The thiol monomers were dithiol, trithiol, tetrathiol or their mixture. It was found that the increase of functionality could lead to the increase of threshold voltage and saturation voltage and the decrease of off-state transmittance. The influence of reaction temperature was also investigated. The results indicated that functionality and reaction temperature had combined effects on the electro-optical properties of PDLC films.     

Synthesis and characterisation of chiral liquid crystalline elastomers containing four-arm crosslinking agent

A new series of side-chain chiral liquid crystalline elastomers derived from M₁ (cholest-5-3-ol(3β)-4-(2-propen-yloxy)]benzoate) and M_C(2,5-[3,5-bis(4-(3-(4-(allyloxy)phenyl)propanoyloxy)benzoyloxy)benzoic acid]isosorbide diester). The structures of monomers and elastomers measured by using Proton Nuclear Magnetic Resonance Spectra (¹H-NMR) and Fourier transform infrared spectroscopy (FTIR) separately are consistent with our design. IIP~VIP all appeared blue Grandjean (GJ) texture on the heating cycle or cooling cycle. The glass sheets of IIP~VIP were made under 150°C and measured its ultraviolet–visible spectrophotometry by PerkinElmer Lambda 950 instrument (Shelton, CT, USA). IIP~VIP all have absorptions at about 481~483 and 561~562 nm. The optical activities were measured at different temperatures on heating and cooling cycles. And the blue selective reflection of IIP~VIP on the round glass sheet can be seen. The elastomers containing less than 6 mol% of the crosslinking units displayed elasticity, reversible phase transition and high thermal stability. The glass transition temperatures reduced first and then increased, the isotropisation temperatures and the mesophase temperature ranges increased first and then decreased with increasing content of crosslinking unit. The thermogravimetric analysis (TGA) results showed that the temperatures at which 5% weight loss occurred (T_d) were greater than 310°C for all the polymers.     

Optical properties of a novel fluorene‐based thermally stable conjugated polymer containing pyridine and unsymmetric carbazole groups

A new diiodo monomer containing heterocyclic pyridine and carbazole groups was synthesized via Chichibabin reaction and used in the preparation of a conjugated polymer via Suzuki coupling approach. The conjugated polymer was highly soluble in common organic solvents such as NMP, THF, dichloromethane, chloroform, toluene, xylene, and benzene at room temperature. The polymer had high glass transition temperature at 191 °C and T_d10 at 434 °C in nitrogen atmosphere. The pristine polymer exhibited the UV–vis maximum absorption at 355 nm and shifted to 420 nm after protonation. The emission of the polymer in THF solution changed from the blue region with maximum peak at 400 nm to the yellow region with maximum peak at 540 nm after protonated by HCl, and the intensity of emission depended on the concentration of acid. The polymer also showed electrochromic behavior under applied voltage. The emission color of the polymer film changed from blue (435 nm) to yellow (570 nm) when 2.5 V bias voltage was applied. The polymer also exhibited write‐once and read‐many‐times (WORM) polymer memory effect with tristable states. © 2009 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 47: 991–1002, 2009     

Electro-optical and dielectric study of multi-walled carbon nanotube doped polymer dispersed liquid crystal films

The self-organising property of nematic liquid crystals (LCs) was used to align multi-walled carbon nanotubes (MWCNT) dispersed in them. MWCNT not only well integrate in the matrix but also, even at very low concentration, have a detectable effect on the LC properties that can be very attractive for display applications. In the present work, MWCNT were doped (0–0.5% wt/wt) in two different types of LCs. These MWCNT doped polymer dispersed LC (CPDLC) films were studied comprehensively using fundamental techniques. Polarising optical microscope (POM) and scanning electron microscope (SEM) techniques used for morphological study reveal that the LC droplet size remains unchanged with increase in MWCNT concentration. The electro-optical (EO) study performed by increasing voltage in steps of 10 V up to 100 V at an optimised frequency of 200 Hz and at temperature 25°C shows that the low MWCNT concentration films show good optical response than the higher one. The dielectric behaviour of CPDLC films in the frequency range 20 Hz to 20 MHz was investigated using precision impedance analyser. The obtained data were modelled with Debye and Cole-Cole methods to calculate relaxation time and distribution parameter (α). The zero value of α indicates Debye type relaxation processes.     

Effect of the applied electric field on new cholesterics with extremely short pitch

New lactic acid derivatives have been prepared and studied and found that they form cholesteric phase with the helix pitch length in interval 120–200 nm within a broad temperature range. Due to the positive dielectric anisotropy and the short pitch, the applied electric field causes reversible optical changes in planar cell, in which the applied electric field reorients the long molecular axis. Presence of short pitch and possibility to effectively affect electro-optical properties are promising from the point of view of specific applications.