The NTB phase in an achiral asymmetrical bent-core liquid crystal terminated with symmetric alkyl chains

ABSTRACT

The characteristics of the twist-bend nematic (N_TB) phase of an achiral asymmetrical rigid bent-core liquid crystal (LC), the ends of which are terminated by symmetric alkyl chains, are reported. The nematic–nematic phase transition and its properties are studied by differential scanning calorimetry (DSC), polarising microscopy and the electro-optic techniques. Large domains of opposite handedness are observed in the absence of the external field in the N_TB phase. Another set of periodic striped pattern consisting of domains with sharp boundaries is formed when a high-frequency electric field with a magnitude above its threshold is applied across a planarly aligned cell. The neighbouring domains are of opposite chirality. The temperature dependence of the heliconical angle θ₀ is determined from the birefringence measurements using Haller’s extrapolation technique. This material shows lower values of the heliconical angle (~9.3° at a temperature of 155°C within the N_TB phase) when compared with the previously reported dimer-based twist-bend nematic LCs (31°±3°).     

Ether- and Thioether-Linked Naphthalene-Based Liquid-Crystal Dimers: Influence of Chalcogen Linkage and Mesogenic-Arm Symmetry on the Incidence and Stability of the Twist–Bend Nematic Phase

The twist–bend nematic (N_TB) phase with a heliconical nanostructure of the local director generating symmetry breaking by achiral bent-shaped molecules is a hot topic of current liquid-crystal science. As opposed to the most common methylene-linked dimers, this study demonstrates chalcogen ether- and/or thioether-linked 6-(4-cyanophenyl)-2-naphthyl-based liquid-crystal dimers with symmetric and asymmetric π-conjugated mesogenic-arm structures that exhibit the N_TB phase. Although the symmetric bis(ether)-linked dimer exhibits only the conventional nematic (N) phase, the asymmetric bis(ether)-linked dimer can form the N_TB phase. All thioether-linked dimers form the N_TB phase, wherein the dimers with asymmetric arms vitrify in the N_TB phase on cooling to room temperature. The phase transitions are discussed in terms of the chalcogen linkage combination, mesogenic-arm symmetry, and spacer length. It is revealed that thioether-linked dimers based on asymmetric π-conjugated mesogenic arms with terminal cyano groups are highly beneficial for the realization of materials that form a wide range of N_TB phases and glassy N_TB states at room temperature.     

Dependence of Mesomorphic Behaviour of Methylene‐Linked Dimers and the Stability of the NTB/NX Phase upon Choice of Mesogenic Units and Terminal Chain Length

Twelve symmetrical dimeric materials consisting of a nonamethylene (C9) spacer and either phenyl 4‐(4′‐alkylphenyl)benzoate, phenyl 4‐(4′‐alkylcyclohexyl)benzoate or phenyl 4‐(4′‐alkylbicyclohexyl)carboxylate mesogenic units were prepared and their mesogenic behaviour characterised by POM, DSC and XRD. All of the materials exhibited nematic phases with clearing points in excess of 200 °C. Four compounds were found to exhibit the twist‐bend nematic phase, with one material exhibiting a transition from the N_TB phase into an anticlinic smectic ‘X’ phase. Across all three series of compounds the length of terminal chain is seen to dictate, to some degree, the type of mesophase formed: shorter terminal chains favour nematic and N_TB mesophases, whereas longer terminal aliphatic chains were found to promote smectic phases.     

Formation and phase transition of cobalt molybdate in cobalt oxide-molybdenum trioxide-alumina system

In the cobalt oxide-molybdenum trioxide-alumina system with a molar ratio of 1:1:1, the amounts of the high-temperature modification (a) of CoMoO₄ formed during heating from 500 to 800°C and the low-temperature modification (b) formed by phase transition during the subsequent cooling to room temperature are influenced by the kinds of alumina used, such as α-, γ- and calcined γ-aluminas. Powder X-ray diffraction analysis revealed that in an α-alumina system formation of a-CoMoO₄ is most favorable at a calcination temperature of 500°C and phase transition from a- to b-CoMoO₄ during cooling is enhanced by higher calcination temperatures. In the γ-alumina system, formation of a-CoMoO₄ is slight at 500°C but increases with increase in the calcination temperature, as does slightly the degree of phase transition from a- to b-CoMoO₄ upon cooling. In a system containing calcined γ-alumina, formation of a-CoMoO₄ similar to α- and γ-alumina systems was observed to occur at 500°C and 800°C, respectively, together with phase transition to b-CoMoO₄ during cooling. The degree of dispersion in the CoOMoO₃ coexistent system is affected by the particle size of aluminas, such as coarse α-, fine amorphous γ- and calcined γ-alumina consisting of both sizes, as observed with electron microscopy. Presence of finer γ-alumina is considered to suppress or retard the solid state reaction and phase transition.     

Molecular structure and the twist-bend nematic phase: the role of terminal chains

ABSTRACT

The synthesis and characterisation of two homologous series of non-symmetric dimers are reported, the 1-(4-methoxybiphenyl-4?-yl)-6-(4-alkylanilinebenzylidene-4?-oxy)hexanes (MeOB6O.m, m = 1–10) and 1-(4-methoxybiphenyl-4?-yl)-6-(4-alkyloxyanilinebenzylidene-4?-oxy)hexanes (MeOB6O.Om, m = 1–9). All 10 members of the MeOB6O.m series exhibit the conventional nematic phase. At lower temperatures, the members with m = 1–7 formed the twist-bend nematic phase, N_TB, whereas for m = 8–10 smectic behaviour replaced the N_TB phase. All nine members of the MeOB6O.Om series also show the conventional nematic phase and for m = 1–3, a strongly monotropic N_TB phase is also observed. The alkyloxy terminated dimers show the higher values of T_NI and T_{NTB N} . For both series, the values of T_NI and T_{NTB N} show a modest alternation and in the same sense as m is increased. These observations suggest that the spatial uniformity of molecular curvature is important in driving the formation of the N_TB phase. The observation of smectic behaviour is attributed to the molecular inhomogeneity arising from the long terminal alkyl chain driving microphase separation. The transitional behaviour of these series is compared to those of the corresponding cyanobiphenyl-based series and overarching observations discussed.     

Crystallization kinetics of a thermotropic liquid crystalline polyimide derived from 1,3-bis[4-(4′-aminophenoxy) cumyl] benzene

We have studied the nonisothermal and isothermal crystallization kinetics of an aromatic thermotropic liquid crystalline polyimide synthesized from 1,2,4,5-benzenetetracarboxylic dianhydride (PMDA) and 1,3-bis[4-(4′-aminophenoxy) cumyl] benzene (BACB) by means of differential scanning calorimetry (DSC). Polarized light microscopy (PLM) and wide-angle X-ray diffraction (WAXD) results confirm that this polyimide exhibits a smectic texture. Nonisothermal crystallization showed two strong and one weak exothermic peaks during cooling. The phase transition from isotropic melt to liquid crystalline state is extremely fast which completes in several seconds. The mesophase transition has a small Avrami parameter, n, of approximate 1. The isothermal crystallization of 253–258°C has been examined. The average value n is about 2.6 and the temperature-dependent rate constant k changes about two orders of magnitude in the crystallization temperature range of 6°C. The slope of ln k versus 1/(T_cΔT) is calculated to be −2.4 × 10⁵, which suggests nucleation control, via primary and/or secondary nucleation for the crystallization process. During the annealing process, a new phase (slow transition) is induced, which grows gradually with annealing time. At lower annealing temperatures (220–230°C), the slow transition process seems not to be influenced by the crystals formed during cooling process and its Avrami parameter n is ca. 0.3–0.4. However, the slow transition was hindered by the crystals formed during cooling process when annealed at higher temperature (230–240°C). © 1998 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 36: 1679–1694, 1998     

On the twist-bend nematic phase formed directly from the isotropic phase

The intriguing twist-bend nematic (N_TB) phase is formed, primarily, by liquid crystal dimers having odd spacers. Typically, the phase is preceded by a nematic (N) phase via a weak first-order transition. Our aim is to obtain dimers where the N_TB phase is formed directly from the isotropic (I) phase via a strong first-order phase transition. The analogy between such behaviour and that of the smectic A (SmA)–N–I sequence suggests that this new dimer will require a short spacer. This expectation is consistent with the prediction of a molecular field theory, since the decrease in the spacer length results in an increase in the molecular curvature. A vector of odd dimers based on benzoyloxybenzylidene mesogenic groups with terminal ethoxy groups has been synthesised with spacers composed of odd numbers of methylene groups. Spacers having 5, 7, 9 and 11 methylene groups are found to possess the conventional phase sequence N_TB–N–I; surprisingly, for the propane spacer, the N_TB phase is formed directly from the I phase. The properties of these dimers have been studied with care to ensure that the identification of the N_TB phase is reliable.     

The oblique chiral nematic phase in calamitic bimesogens

ABSTRACT

The discovery of the oblique chiral (or, the twist-bend, N_TB) nematic phase predicted for bent-core mesogens has engendered much interest due to its unique structure and physical properties, and the possibility of use in the next generation of fast electro-optic technology. Bimesogenic calamitic as well as bent-core mesogens are found to form the N_TB phase. Here, we report direct measurements of the temperature dependence of the conical tilt and the evidence of volcano-like orientational distribution of molecules in the N_TB phase. Optical and x-ray scattering investigations of two single-component calamitic bimesogens and their mixtures show that, while the Maier–Saupe orientational distribution function (ODF) is valid for the higher temperature nematic phase, a generalised expansion in terms of even Legendre functions is needed for the N_TB phase. Temperature dependence of the ODFs and the order parameters 〈P₂(cosβ)〉, 〈P₄(cosβ)〉, and 〈P₆(cosβ)〉 has been measured in both phases. The parameters 〈P₂(cosβ)〉 and 〈P₄(cosβ)〉 increase/decrease in the N/N_TB phase with decreasing temperature, while 〈P₆(cosβ)〉 remains vanishingly small for all samples. The value of 〈P₄(cosβ)〉 becomes negative in the N_TB phase confirming a conical distribution of molecules as they follow a helical trajectory keeping the local director tilted at an angle α wrt the macroscopic director. The heliconical tilt calculated from ODFs, exhibits a power law behaviour with temperature, vanishing at the transition to the N phase.     

A4N2O5 (A = Na,K), neue Oxidnitrite der Alkalimetalle und eine Bemerkung zum quasi-binären System K3NO3/K3OBr

A₄N₂O₅ (A = Na, K) Novel Alkali Metal Oxide Nitrites, and a Comment on the System K₃NO₃/K₃OBr K₄N₂O₅ and Na₄N₂O₅ have been prepared for the first time: the respective alkali metal nitrites and -oxides in molar ratios 2 : 1 have been reacted in the solid state. Their crystal structure (for crystallographic data see ?Inhaltsübersicht”?) derive from the anti-K₂NiF₄ type of structure. Na₄N₂O₅ undergoes two phase transitions (at ?15°C and ?60°C) upon cooling. The behavior of solid solutions in the system K₃NO₃/K₃OBr at cooling gives support for the phase transition being driven by the OK₃-framework, where as in Na₃NO₃ order-disorder transitions of the NO₂^? group seem to induce the phase transitions.     

Preparation and liquid-crystalline properties of toluene-4-sulphonyl urethane of hydroxypropylcellulose

Abstract

A novel liquid-crystalline polymer, the toluene-4-sulphonyl urethane of hydroxypropylcellulose (TSUHPC), was prepared through chemical modification of hydroxypropylcellulose (HPC) of M_w = 60000 g mol^?1. The resulting polymer was characterized by infrared spectroscopy, differential scanning calorimetry (DSC) and polarizing microscopy. It was found that thermotropic liquid crystal phases are formed between about 60°C and 110°C. Concentrated solutions of TSUHPC in acetone and N,N-dimethylacetamide exhibit cholesteric behaviour, at room temperature. When approaching the lyotropic mesophase to solid transition, either by cooling or by solvent evaporation, very interesting arborescent structures of a seemingly fractal nature may be observed, depending on the kinetics of the transition. A banded texture can be observed when the polymer is sheared near the transition to the isotropic phase.     

Chemical and structural transformations in manganese aluminum spinel of the composition Mn1.5Al1.5O4 during heating and cooling in air

Single phase cubic spinel of the composition Mn_1.5Al_1.5O₄ is synthesized. Its crystal structure refinement shows that 0.4Mn+0.6Al are in the octahedral sites and 0.7Mn+0.3Al are in the tetrahedral sites. High temperature X-ray diffraction is used to analyze Mn_1.5Al_1.5O₄ behavior during heating and cooling in air. In a temperature range of 600°C to 700°C, initial spinel splits into layers, and the sample represents a twophase system: cubic spinel Mn_0.4Al_2.4O₄ and a phase based on β-Mn₃O₄. Above 900°C the sample again turns into single phase cubic spinel. The role of oxidizing processes in the decomposition of Mn_1.5Al_1.5O₄ caused by oxygenation and partial oxidation of Mn²⁺ to Mn³⁺ is shown. A scheme of structural transformations of manganese aluminum spinel during heating from room temperature and cooling from 950°C is proposed.     

Ba5[CrN4]N: Das erste Nitridochromat(V)

Ba₅[CrN₄]N: The First Nitridochromate(V) Ba₅[CrN₄]N is prepared by reaction of mixtures of Li₃N, Ba₃N₂ and CrN/Cr₂N (1 : 1) (molar ratio Li : Ba : Cr = 3 : 5 : 1) in tantalum crucibles at 700°C with flowing nitrogen (1 atm) within a period of 48 h. After cooling down to room temperature (60°C/h) black-shining single crystals of the ternary phase with a platy habit are obtained (monoclinic, C2/m; a = 1054.0(2) pm, b = 1170.9(3) pm, c = 937.7(2) pm, b? = 110,79(2)°; Z = 4). The crystal structure contains isolated complex anions [Cr^VN₄]^7? which nearly satisfy the ideal tetrahedral symmetry (Cr? N [pm]: 2 × 175.3(4), 2 × 175.8(5); N? Cr? N [°]: 106.8(2), 109.5(2), 2 × 109.9(2), 2 × 110,3(2)). The coordination sphere for each of the terminal nitride functions of the complex anions is completed by five neighbouring Ba²⁺ ions (distorted CrBa₅ octahedra). The octahedra are connected via common CrBa₂ faces as well as CrBa edges thereby forming condensed tetrameric octahedral groups. The isolated nitride ions which are also present in the crystal structure of Ba₅[CrN₄]N are in an octahedral environment of Ba²⁺ ions. The presence of a d¹-System (Cr(V)) is confirmed by magnetic susceptibility data.     

The twist-bend nematic phase: translational self-diffusion and biaxiality studied by 1H nuclear magnetic resonance diffusometry

ABSTRACT

Recently, there has been a surge of interest in mesogens exhibiting the twist-bend nematic (N_TB) phase that is shown to be chiral even though formed by effectively achiral molecules. Although it now seems to be clear that the N_TB phase in the bulk is formed by degenerate domains having opposite handedness, the presence of a supramolecular heliconical structure proposed in the Dozov model has been contradicted by the Hoffmann et al. model in which the heliconical arrangement is replaced by a polar nematic phase. The evidence in support of this is that the quadrupolar splitting tensor measured in various experiments is uniaxial and not biaxial as expected for the twist-bend nematic structure. In this debate, among other evidence, the molecular translational diffusion, and its magnitude with respect to that in the nematic phase above the N_TB phase, has also been invoked to eliminate or to confirm one model or the other. We attempt to resolve this issue by reporting the first measurements of the translational self-diffusion coefficients in the nematic and twist-bend nematic phases formed 1″,7″-bis-4-(4′-cyanobiphenyl-4′-yl) heptane (CB7CB). Such measurements certainly appear to resolve the differences between the two models in favour of that for the classic twist-bend nematic phase.     

Polymorphism in copper pyrovanadate

Formation and stability temperatures were determined for the three polymorphs of copper pyrovanadate. The low-temperature β phase is formed at 500°C and is stable from room temperature to 610°C. The intermediate phase is stable within 610–705°C. The high-temperature γ phase is stable within 710–780°C. The rates of γ → α and α → β phase transitions upon cooling differ considerably. α-Cu₂V₂O₇ detected at room temperature upon cooling of a molten sample is metastable.     

Self-organization processes and phase transitions in nanocrystalline hydroxyapatite according to exoemission data

Low-temperature (20–360°C) exoemission of negative charges from nanocrystalline hydroxyapatite Ca₁₀(PO₄)₆(OH)₂ was studied. Thermal cycling and storage at 20°C were found to induce self-organization processes with charge separation and the formation of a negatively charged layer on the surface. The negative charge formed was long retained at elevated temperatures and only decreased during cooling in the temperature region of the structural transition, as is characteristic of thermoelectrets. No stable electrets formed in hydroxyapatite samples calcined at a high temperature (>800°C).     

Phase-transition studies of 5O.5 and 9O.4

As part of our detailed comparative studies of groups of liquid-crystalline compounds that belong to a homologous series, we present phase-transition studies of the compounds N-(4-n-pentyloxybenzylidene)4′-n-pentylaniline (5O.5) and N-(4-n-nonyloxybenzylidene)4′-n-butylaniline (9O.4) using different experimental techniques. The compound 5O.5 is reported to exhibit a phase sequence N, S_A, S_C, S_B and S_G, while 90.4 shows the sequence S_A, S_F and S_G. The salient features of our work on 5O.5 are (i) a new smectic F phase is found in place of the reported smectic B phase, which is confirmed by both miscibility and X-ray studies; (ii) the formation of smectic-C-like short-range order in the nematic phase well above the S_A-N transition; and (iii) a large tilt-angle variation in the smectic C phase (0–23·5°C) in a small temperature range (4·1°C). The phase changes across the S_A-I transition, and for the first time across S_F-S_A transition, are carried out by volumetric studies. The detailed inferences of these are also presented.     

Apolar Bimesogens and the Incidence of the Twist–Bend Nematic Phase

The nematic twist–bend phase (N_TB) was, until recently, only observed for polar mesogenic dimers, trimers or bent‐core compounds. In this article, we report a comprehensive study on novel apolar materials that also exhibit N_TB phases. The N_TB phase was observed for materials containing phenyl, cyclohexyl or bicyclooctyl rings in their rigid‐core units. However, for materials with long (>C7) terminal chains or mesogenic core units comprising three ring units, the N_TB phase was not observed and instead the materials exhibited smectic phases. One compound was found to exhibit a transition from the N_TB phase to an anticlinic smectic C phase; this is the first example of this polymorphism. Incorporation of lateral substitution with respect to the central core unit led to reductions in transition temperatures; however, the N_TB phase was still found to occur. Conversely, utilising branched terminal groups rendered the materials non‐mesogenic. Overall, it appears that it is the gross molecular topology that drives the incidence of the N_TB phase rather than simple dipolar considerations. Furthermore, dimers lacking any polar groups, which were prepared to test this hypothesis, were found to be non mesogenic, indicating that at the extremes of polarity these effects can dominate over topology.     

Zeit- und temperaturaufgelöste Röntgenpulverdiffraktometrie: Die Reaktion von (NH4)2SnF6 mit Ammoniak

Time and Temperature Resolved in situ X-Ray Powder Diffractometry. The Reaction of (NH₄)₂SnF₆ with Ammonia The thermal decomposition of (NH₄)₂SnF₆ under an atmosphere of ammonia is reported. The complicated reaction paths were illucidated by time and temperature resolved in situ x-ray powder diffractometry. It is shown that this technique is a powerful tool to observe structural changes during reaction. It offers also a valuable access to thermodynamic and kinetic data for solid state and gas phase reactions. (NH₄)₂SnF₆ decomposes under ammonia below room temperature to NH₄F and amorphous SnF₄ · x NH₃. At a temperature of 80°C an intermediate product, (NH₄)₄SnF₈, is formed, which decomposes at 140°C into (NH₄)₂SnF₆ and NH₄F. At 250°C (NH₄)[Sn(NH₃)F₅] and Sn(NH₃)₂F₄ are formed. The latter crystallises C-centered monoclinic with lattice constants a = 844.1(5) pm, b = 630.5(3) pm, c = 520.2(3) pm and b? = 114.02(7)°. At 330°C a further decomposition yields SnF₂(NH₂)₂ with a C-centered monoclinic cell and lattice constants a = 1 069(7), b = 325.3(2), c = 504.8(3) pm and b? = 105.83(7)°. Finally above 500°C tin metal is formed.     

Röntgenographische Hochtemperaturuntersuchung der Thermischen Zersetzung von Dodekawolframatoborsäure

Investigation on the Thermal Degradation of 12-Tungstoboric Acid by Means of X-ray Heating Photographs By means of X-ray Guinier investigation of 12-tungstoboric acid hexahydrate H₅[BO₄W₁₂O₁₂] · 6H₂O at room temperature a monoclinic lattice was determined, being in disagreement with the literature. The LSQ-refinement of parameters of the monoclinic C-lattice give a = 1.728 nm, b = 1.215 nm, c = 1.216 nm, b? = 135° 34′, Z = 2, d_exp. = 5.44 g cm^?3, d_calcd. = 5.52 g cm ^?3. From X-ray heating patterns (heating rate: 4°C/min, atmosphere: air) the formation of a new monoclinic phase at 185°C was found, being stable till 270°C. From 270–420°C exist a bad crystalline phase and from 420–840°C a monoclinic phase: a = 0.532 nm, b = 0.389 nm, c = 0.522 nm, b? = 91° 09′. Above 840°C a tetragonal phase is formed with a diagram typical for pure WO₃. The relationship between the modifications is discussed.     

Structure-property relationships in azobenzene-based twist-bend nematogens

ABSTRACT

The synthesis and characterisation of a new set of azobenzene-based non-symmetric liquid crystal dimers, the 1-(4-substitutedazobenzene-4?-yloxy)-6-(4-methoxybiphenyl-4?-yl)hexanes (MeOB6OABX), that exhibit the twist-bend nematic phase, N_TB, is described. The terminal substituents are methyl, methoxy, ethyl, butyl, butoxy, and nitrile. All six dimers exhibit both the N_TB and conventional nematic, N, phases. The identification of the N_TB phase was performed using polarised light microscopy and confirmed for binary mixtures with a standard twist-bend nematogen 1,7-bis-4-(4?-cyanobiphenyl) heptane (CB7CB). The transitional behaviour of the MeOB6OABX dimers is compared with that of the corresponding ether-linked 1-(4-substitutedazobenzene-4?-yloxy)-6-(4-methoxybiphenyl-4?-yloxy)pentanes, MeOBO5OABX, all of which exhibit a conventional nematic phase. In addition, the nitrile-substituted MeOBO5OABCN shows the N_TB phase. The behaviour of these non-symmetric dimers is also compared to that of the corresponding symmetric dimers. Differences in the transitional properties between these sets of new materials are accounted for in terms of not only molecular shape but also other factors including the strength of the mixed mesogen interaction.