Al-Ti-V-M四元系合金TiAl3-VAl3-MAl3(M=Ni,Fe)赝三元系相图的室温截面

本文用X射线衍射法测定了Al-Ti-V-M四元系合金TiAl₃-VAl₃-MAI₃(M=Ni,Fe)两个赝三元系相图的室温截面。(1)TiAl₃-VAl₃NiAl₃赝三元系相图室温截面由一个单相点ε(NiAl₃)、一个单相区δ(TiAl₃和VAl₃形成的连续固溶体)和一个两相区δ+s所组成。(2)TiAl关键词：     

Optical properties of N and transition metal R (R=V,Cr, Mn,Fe, Co,Ni, Cu,and Zn) codoped anatase TiO2

The electronic structures, deformation charge density, dipole moment and optical properties of N and transition metal R (R=V, Cr, Mn, Fe, Co, Ni, Cu and Zn) codoped anatase TiO₂ are studied using the plane-wave ultrasoft pseudopotential method of density functional theory (DFT). The results exhibit that the absorption coefficients of the N+Cr-doped TiO₂ are in accordance with the experimental values in the visible-light region. The calculated results reveal that the N+R-doped TiO₂ is helpful for enhancing the absorption coefficient in the visible-light region; especially, among the eight materials, N+Mn-doped TiO₂ has the largest value of absorption coefficient in the visible-light region. The ionic bonding and Jahn–Teller distortion would contribute to increase the photocatalytic activity of TiO₂ in the visible-light region. All in all, for doped TiO₂, the large dipole moment of TiO₆ octahedron can enhance the optical responses in the visible-light region; in this work, however, it is found that the small dipole moment of TiO₆ octahedron would increase the absorption coefficient in the visible-light region.     

Multiple nano-TiO2 layers to prevent dye/nano-TiO2 from photodegradation under a UV-exposure environment

A device of multiple nano-TiO₂ layers was proposed and fabricated to prevent a dye/nano-TiO₂ region from serious photo-degradation. In this device, the top of the dye/TiO₂ region was designed to be coated using sol-gel nano-TiO₂ thin films to shield UV irradiation from the photo-degradation effect. The sol-gel TiO₂ was prepared in a low temperature (75 °C) and verified as nano-sized particles and an anatase crystalline structure. Different devices of the multi-layer samples fabricated using different compositions of nano-TiO₂ were produced and exposed for UV irradiation tests. Results show that the presence of the sol-gel TiO₂ films coated on top of the dye/TiO₂ region can significantly alleviate the dye photo-degradation under UV irradiation. This multi-layer device can effectively improve the photo-stability of the dye/TiO₂ region in a UV-exposure environment.     

Entanglement in the anisotropic Heisenberg XYZ model with different Dzyaloshinskii-Moriya interaction and inhomogeneous magnetic field

We investigate the entanglement in a two-qubit Heisenberg XYZ system with different Dzyaloshinskii-Moriya (DM) interaction and inhomogeneous magnetic field. It is found that the control parameters (D_x, B_x and b_x) are remarkably different with the common control parameters (D_z, B_z and b_z) in the entanglement and the critical temperature, and these x-component parameters can increase the entanglement and the critical temperature more efficiently. Furthermore, we show the properties of these x-component parameters for the control of entanglement. In the ground state, increasing D_x (spin-orbit coupling parameter) can decrease the critical value b_xc and increase the entanglement in the revival region, and adjusting some parameters (increasing b_x and J, decreasing B_x and Δ) can decrease the critical value D_xc to enlarge the revival region. In the thermal state, increasing D_x can increase the revival region and the entanglement in the revival region (for T or b_x), and enhance the critical value B_xc to make the region of high entanglement larger. Also, the entanglement and the revival region will increase with the decrease of B_x (uniform magnetic field). In addition, small b_x (nonuniform magnetic field) has some similar properties to D_x, and with the increase of b_x the entanglement also has a revival phenomenon, so that the entanglement can exist at higher temperature for larger b_x.     

Bi2Sr2CaCu2O8 crystal with a region of periodic blind antidots – transition between bulk and interface vortex pinning

This work focuses on differential magneto-optical two-dimensional imaging of the current distribution in a high-T_c superconducting Bi₂Sr₂CaCu₂O₈ crystal having a region of 170 × 170 μm² patterned with periodic blind antidots. By measuring the self-induced field of an applied current, we can map the current flow distribution within and at the edges of the patterned region. We detected three separate types of current flow within the patterned region, which correspond to three different arrangements of pancake vortices within and at the edges of the patterned region. At high temperatures the vortices delocalize from the antidots, presumably due to thermal fluctuations. However, at lower temperatures vortex pinning mechanisms become prominent, lowering the vortex mobility in the patterned region. There are two contributing mechanisms: bulk pinning by the patterned antidots and interface pinning due to an entry barrier into the patterned region. Each mechanism is dominant at different temperatures. From our experiments we see that the T–H transition line from the bulk to the interface pinning and the vortex melting line in the pristine region coincide.     

Mid-infrared supercontinuum generation in a four-hole As2S5 chalcogenide microstructured optical fiber

We demonstrate the supercontinuum (SC) generation in a four-hole As₂S₅ chalcogenide microstructured optical fiber (MOF) experimentally. The As₂S₅ glass has better property of transmission than As₂S₃ glass in the visible range. The four-hole As₂S₅ MOF is fabricated by a rod-in-tube method. The SCs generated by different pump wavelengths at 2,000, 2,300 and 2,500 nm in the MOF whose length is from 2.3 to 20 cm are demonstrated. Those pump wavelengths correspond to the chromatic dispersion wavelength in the normal chromatic dispersion region, the anomalous chromatic dispersion region close to zero-dispersion wavelength (ZDW) and the anomalous chromatic dispersion region far from ZDW, respectively. Wider SCs can be obtained when pumped at a wavelength in the anomalous dispersion region close to ZDW. The widest SC range of 4,280 nm (from 1,370 to 5,650 nm) covering two octaves was obtained in a 4.8-cm-long fiber pumped at 2,300 nm.     

Effect of Discharge Plasma Potential on Diffusion Plasma Parameters Controlled by a Mesh Grid in a Double Plasma Device

The plasma region under investigation is separated from the discharge region by a mesh grid. Plasma potential and electron number densities and electron temperatures under bi‐Maxwellian approximation for electron distribution function of the multi‐dipole argon plasma are measured. The cold electrons in the diffusion region are produced by local ionization. The hot electrons are the ionizing electrons behaving as Maxwellian. The electron trapping process in the discharge region is produced by potential well due to positive plasma potential with respect to the anode and by a repulsive grid. The dependence of ratios of the density of the hot to the cold electrons N_E (=N_eh/N_ec) and hot to cold electron temperature T(=T_eh/T_ec) in the diffusion region on the depth of the potential well has been investigated. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Mechanism of electron beam poled SHG in 0.95GeS2·0.05In2S3 chalcogenide glasses

Utilizing the Maker fringe method, SHG was observed in the 0.95GeS₂·0.05In₂S₃ chalcogenide glass irradiated by the electron beam and the intensity of SH increases with the enhancement of beam current from 15 to 25 nA. According to Raman spectra of the as-prepared and the irradiated one, no distinct micro-structural transformation was found. In this work, the built-in charge model was founded to interpret the poling mechanism of electron beam irradiation, the emission of the secondary electrons and Auger electrons results in the formation of positive region and the absorbed electrons form negative region. The positive region was situated near the poling surface, and the negative region was much deeper than the positive region. Between the two opposite charged regions, a strong space-charge electrostatic field, E_dc, is created, which leads to the nonzero χ⁽²⁾ in the 0.95GeS₂·0.05In₂S₃ glass. The emission of backscattered electrons does no contribution to the formation of E_dc.     

Millimeter and submillimeter wave absorption by atmospheric pollutants and constituents

Calculated absorption coefficients and rotational transition frequencies ara given for a number of polar molecules of interest to pollution and energy research. The results, which are presented in graphical form for microwave frequencies up to 1400 GHz, illustrate the increased absorption line intensities occurring in the submillimeter region. For most species, these absorption coefficients attain their maximum values in this region. Included in the calculations are SO₂, H₂CO, O₃, H₂O, H₂S, OCS, CO, NO, OH, SO, NH₃, and CS. A discussion of the techniques currently available for detection in the submillimeter region of these species is also given.     

INFLUENCE OF PINNING CENTRE DISTRIBUTION ON THE DYNAMICS OF TWO-DIMENSIONAL VORTEX SYSTEM

Numerical study of the influence of the distribution of pinning centres on the dynamics of a two-dimensional vortex system is performed. The superconductor sample has a periodic structure with a pinned region of length L_p and an unpinned region of length L_x-L_p along the direction of driving force (Lorentz force). Results show that, at zero temperature, the critical force F_c increases with the increase of L_p, indicating that the homogeneity of pinning centres helps to enhance the critical electric current of the superconductor. At large driving forces, vortex static channels form in the pinned region even for L_px.     

铌酸锂晶体中多畴层带区倍频光的研究

本文研究用声光调Q-YAG激光器作为基波光源,测量了LiNbO₃及BNN晶体中倍频光强-温度曲线。在生长层区,倍频曲线上往往出现双峰,同时有一一对应的NPM双光环出现。LiNbO₃的双峰之一在极化处理后消失,本文对此峰的产生进行了分析。LiNbO₃多畴层带区倍频光强比单畴区大10倍左右,实验表明此乃层带区180°畴的形成导致应力松弛的结果。 关键词：     

Influence of the deposition parameters on the transition region of hydrogenated silicon films growth

Hydrogenated microcrystalline and amorphous silicon thin films were prepared by very high frequency plasmaenhanced chemical vapour deposition （VHF PECVD） by using a mixture of silane and hydrogen as source gas. The influence of deposition parameters on the transition region of hydrogenated silicon films growth was investigated by varying the silane concentration （SC）, plasma power （Pw）, working pressure （P）, and substrate temperature （Ts）. Results suggest that SC and Ts are the most critical factors that affect the film structure transition from microcrystalline to amorphous phase. A narrow region in the range of SC and Ts, in which the rapid phase transition takes place, was identified. It was found that at lower P or higher Pw, the transition region is shifted to larger SC. In addition, the dark conductivity and photoconductivity decrease with SC and show sharp changes in the transition region. It proposed that the transition process and the transition region are determined by the competition between the etching effect of atomic hydrogen and the growth of amorphous phase.     

The absorption cross sections of N2, O2, CO,NO, CO2, N2O,CH4, C2H4, C2H6 and C4H10 from 180 to 700Å

The absorption cross sections of N₂, O₂, CO, NO, CO₂, N₂O, CH₄, C₂H₄, C₂H₆, C₄H₁₀ have been measured photoelectrically in the 180–700 Å region using synchrotron radiation. The absorption cross sections in the region λ ≥ 500 Å was found to be structureless and to increase monotonically with wavelength for all gases. The positions of the structure observed in the 520–720 Å region for N₂, O₂, CO₂ and N₂O are consistent with the various Rydberg series reported by previous authors.     

Two-phase state in Mg3Cd alloy

The kinetics of order-disorder processes in alloys of type Mg₃Cd and MgCd₃ in the single-phase and two-phase regions are investigated by measuring the electrical resistance of the material directly at the temperatures at which tests are carried out. It is shown that in a MgCd₃-type alloy the processes involved in an order-disorder transition proceed much more slowly in the two-phase region than in the single-phase region. The Mg₃Cd alloy, on the other hand, exhibits no such delay effects. The difference in the behavior of the investigated alloys is due to the fact that the lattice distortions accompanying transitions in the two-phase region are greater for MgCd₃ than for Mg₃Cd.     

Generation and control of chaos in a Bose--Einstein condensate

For a Bose--Einstein condensate (BEC) confined in a double lattice consisting of two weak laser standing waves we find the Melnikov chaotic solution and chaotic region of parameter space by using the direct perturbation method. In the chaotic region, spatial evolutions of the chaotic solution and the corresponding distribution of particle number density are bounded but unpredictable between their superior and inferior limits. It is illustrated that when the relation k₁\approx k₂ between the two laser wave vectors is kept, the adjustment from k₂1 to k₂\ge k₁ can transform the chaotic region into regular one or the other way round. This suggests a feasible scheme for generating and controlling chaos, which could lead to an experimental observation in the near future.     

Fractal magnetic microstructure in the (Co<Subscript>41</Subscript>Fe<Subscript>39</Subscript>B<Subscript>20</Subscript>)<Subscript>x</Subscript>(SiO<Subscript>2</Subscript>)<Subscript>1−<Emphasis Type="Italic">x</Emphasis></Subscript> nanocomposite films

Magnetostructural methods are applied to determine the exchange bond percolation limit in (Co₄₁Fe₃₉B₂₀)_x(SiO₂)_1?x nanocomposites (x _c = 0.30 ± 0.02), which separates the phase plane along the metal concentration axis into a superparamagnetic region and a ferromagnetic region. It is shown that, with respect to the singularities of the magnetization up to the magnetization saturation curves, the ferromagnetic region is further subdivided into three regions differing in the character of the spatial propagation of the magnetization ripples or in the magnetic correlation function characteristics. The fractal dimension of the nanocomposite magnetic microstructure near the percolation threshold is determined.     

Computer simulation for magnetization process in CoCl2 · 2H2O. II.

The magnetization process in the two-dimensional Ising antiferromagnet which stands for CoCl₂ · 2H₂O was investigated by a computer simulation and new five transitions were found in the antiferromagnetic region in addition to those in the ferrimagnetic region.     

High field magnetization of europium-graphite intercalation compound C6Eu

The whole magnetization curve of the first stage compound C₆Eu has been measured by using pulsed fields up to 400 kG below 40 K. For H ⊥ c, c being the crystal c-axis, four regions are observed in the magnetization curve; I) the initial magnetization region with an apparent moment of ～ 0.6micro_B per Eu ion (H < 12 kG), II) the intermediate region with nearly constant moment of 2.2 – 2.7 micro_B, which corresponds to $\text{1}\text{3}$ the full moment of Eu²⁺ ion (22 < H < 82 kG), III) the region of a linear field dependence (82 < H < 205 kG), and IV) the saturation region above 205 kG, where the saturation moment is found as 6.2 micro_B. For H//c, the magnetization increases monotonically and approaches to a saturation value corresponding to 6 micro_B above 240 kG.     

Vacuum ultraviolet reflectivity and band structure of SrTiO3 and BaTiO3

The room temperature near-normal incidence reflectance spectra for SrTiO₃ and BaTiO₃ have been measured in the energy region 10 to 32 eV. The optical constants for the region 0 to 32eV have been derived from a Kramers-Kronig analysis by including earlier measurements for the low energy region. For SrTiO₃ five peaks in the Ti3d derived conduction band density of states have been found on the basis of experimental data only, neglecting excitonic effects. The energies of these peaks are in excellent agreement with peaks in the density of states calculated by Mattheiss. The results for BaTiO₃ could not be interpreted as unambiguously in such a scheme. Alternatively, some of the transitions could be interpreted as being due to core level excitons.