Determination of the c(2 × 2) structure of sulfur on Fe{001} by low-energy electron diffraction

In the early stages of reaction with sulfur, a clean Fe{001} surface develops a c(2 × 2) superstructure. A low-energy electron diffraction analysis of this structure leads to a model in which the S atoms lie in the four-fold symmetrical sites on the Fe{001} surface, the S-Fe interplanar spacing being $\text{1.09 ± 0.05}\text{A}\text{?}$ and corresponding to an effective radius of 1.06 Å for the chemisorbed S atoms. In contrast to Fe{001} 1 × 1-O, the first interlayer spacing of the substrate here is not significantly expanded.     

Further dynamical and experimental LEED results for a clean W<“001”-(1 × 1) surface structure determination

Full dynamical layer-doubling calculations have been made for comparison with precision LEED spectra for the clean W “001”-(l × 1) surface at approximately 470 K. Using 45 beams and 10 phase shifts, multi-layer spacing calculated spectra are critically compared with 12 experimental curves involving 5 different beams and 5 incidence angles. Both visual judgements and a semi-quantitative peak deviation/penalty evaluation yield the same result. A surface-bulk layer spacing of 1.51 ± 0.05 Å is concluded, a 4.4% contraction, in contrast to the most recent other determination of 1.40 ± 0.03 Å. This analysis re-emphasizes the need for a reliable and objective criterion for comparing observed and calculated LEED spectra, and corrects a potentially important input to the analysis of more complex systems. For example, at low temperatures (<370 K) the W “001” clean surface rearranges to a c(2 × 2) structure.     

Hydrogen-induced reconstruction on a high step density W(001) surface

The hydrogen-induced reconstruction on a high step density W(001) crystal, ($\text{2}\text{×}\text{2}$)R45°-H, with steps oriented parallel to the [110] and ～ 28 Å average terrace width has been investigated using LEED symmetry, beam shape analyses, and EELS. The symmetry of the LEED pattern is observed to change from p2mg for the ($\text{2}\text{×}\text{2}$)R45° clean surface reconstruction to c2mm for the commensurate phase ($\text{2}\text{×}\text{2}$)R45°-H reconstruction. Correspondingly, the shapes of the half-order beams indicate that the hydrogen-induced reconstruction domains are much less elongated than the clean surface domains. A splitting of each half-order beam into four beams at higher exposures indicates the existence of two domains of the incommensurate phase. A commensurate phase v₁ vibrational loss peak centered at 160 meV in the EELS spectrum broadens on the low-energy side during the incommensurate phase and then shifts toward 130 meV and narrows as the (1×1)-H saturation structure develops. These observations imply that there is no long-range inhibition ( ～ 20 Å) to the formation of either commensurate or incommensurate phase; hydrogen induces a switching of the atomic displacements from 〈110〉 directions on a clean surface to 〈100〉 directions, even with steps oriented parallel to the [110]; and in the incommensurate phase there is a distribution of hydrogen site geometries with the most probable geometry more like the commensurate phase geometry than the saturation phase geometry.     

Electron states and atomic positions at the {001}, {110} and {111} faces of W and Mo

The results of ab initio calculations on the {001}, {110} and {111} surfaces of W and Mo and on the (√2 × √2)R45° reconstructed W {001} surface are presented. A distribution of surface states in reasonable agreement with experiment is found. A simple parametrisation of the short range repulsive force between transition metal atoms is used to predict, for all these surfaces, relaxations which are comparable with those observed. This same parametrisation indicates that the W and Mo {001} surfaces are stable to proposed reconstructive displacements.     

On the atomic structure of {001}W

Results of a field ion microscope study of the clean surface structure of the {001} surface plane of tungsten are presented. The major conclusions are that {001}W is reconstructed over the temperature range 15–580 K, and that the reconstructed surface contains an alternating vertical component to the displacements of the W surface atoms. There are two magnitudes of verticaldisplacement, each arrayed with p(2 × 2) symmetry, and if the differences in the magnitude are neglected, the vertical displacements are arrayed in the well known (√2 × √2)R45° configuration. Details of this newly developed experimental approach for the study of surface reconstruction are reported, along with a number of control experiments which exclude the possibility that these results are artifacts due to the experimental technique. The discussion includes a comparison of the present results with those drawn from other experimental techniques, primarily low energy electron diffraction.     

Displacive surface phases formed by hydrogen chemisorption on W {001}

A detailed LEED study is reported of the surface phases stabilised by hydrogen chemisorption on W {001}, over the temperature range 170 to 400 K, correlated with absolute determinations of surface coverages and sticking probabilities. The saturation coverage at 300 K is 19(± 3) × 10¹⁴ atoms cm^?2, corresponding to a surface stoichiometry of WH₂, and the initial sticking probability for both H₂ and D₂ is 0.60 ± 0.03, independent of substrate temperature down to 170 K. Over the range 170 to 300 K six coverage-dependent temperature-independent phases are identified, and the transition coverages determined. As with the clean surface $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$ displacive phase, the c(2 × 2)-H phase is inhibited by the presence of steps and impurities over large distances (～20 Å), again strongly indicative of CDW-PLD mechanisms for the formation of the H-stabilised phases. These phases are significantly more temperature stable than the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$, the most stable being a c(2 × 2)-H split half-order phase which is formed at domain stoichiometries between WH_0.3 and WH_0.5. LEED symmetry analysis, the dependence of half-order intensity and half-width on coverage, and I-V spectra indicate that the c(2 × 2)-H phase is a different displacive structure from that determined by Debe and King for the clean $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$. LEED I-V spectra are consistent with an expansion of the surface-bulk interlayer spacing from 1.48 to 1.51 Å as the hydrogen coverage increases to ～4 × 10¹⁴ atoms cm^?2. The transition from the split half-order to a streaked half-order phase is found to be correlated with changes in a range of other physical properties previously reported for this system. As the surface stoichiometry increases from WH to WH₂ a gradual transition occurs between a phase devoid of long-range order to well-ordered (1 × 1)-H. Displacive structures are proposed for the various phases formed, based on the hypothesis that at any coverage the most stable phase is determined by the gain in stability produced by a combination of chemical bonding to form a local surface complex and electron-phonon coupling to produce a periodic lattice distortion. The sequence of commensurate, incommensurate and disordered structures are consistent with the wealth of data now available for this system. Finally, a simple structural model is suggested for the peak-splitting observed in desorption spectra.     

LEED analysis of the Co{001}c(2 × 2)O structure

A LEED intensity analysis of the c(2 × 2) structure obtained upon adsorption of oxygen gas on Co {00l} is reported. Three structural models have been tested on the basis of a total of 13 LEED spectra for three angles of incidence and one azimuth. The correct model has oxygen atoms chemisorbed in the four-fold symmetrical hollows formed by four adjacent substrate atoms. Atomic arrangement and metal-oxygen distances are analogous to those found in Ni{001}c(2 × 2)O.     

DFT and Monte Carlo study of the W(001) surface reconstruction

The driving force for the W(001) surface reconstruction and electronic structures of pristine and H-covered W(001) surfaces are studied by means of relativistic DFT calculations. The spin-orbit coupling leads to the splitting of the bands. Adsorbed physical monolayer of hydrogen due to forming adsorption bonds stabilizes the (1 × 1) structure of the H/W(001) surface. The performed calculations have not revealed any substantial nesting of Fermi surface, so do not support the Peierls-like charge-density-wave mechanism of the surface reconstruction. The total energy of the (√2 × √2)R45° W(001) surface structure is found to be lower, by 0.14 eV per atom, than for the (1 × 1 W(001). The dependence of the relative intensity of the characteristic LEED reflection on temperature, obtained with the help of Monte Carlo simulations using the interaction energies estimated from DFT calculations, is in good agreement with available experimental data, thus supporting the concept of the order-disorder type of the transition between the low-temperature ((√2 × √2)R45° and room-temperature (1 × 1) surface structures of W(001).     

Direct observation of the atomic structure of W {100} surfaces

Fully resolved atomic images of the W {100} plane are obtained with the field ion microscope at 21°K. The image structure is consistent with the (1 × 1) structure. If shifts of atoms in the 〈110〉 directions parallel to the plane have occurred as derived from LEED investigations in the temperature range of 100–370°K, then the shifts at 21°K are too small to be observed in the FIM.     

A LEED inquiry into the question of reconstruction of {001} Nb

We have examined the structure of the {001} surface of Nb by LEED and have found that a (1 × 1) diffraction pattern prevails over the entire range of temperature investigated, that is 15–1000 K. This is the first observation of an unreconstructed {001} surface of a bcc metal over such a temperature range. This result is consistent with a reconstruction mechanism requiring the coupling of occupied surface states and is expected to further theoretical development of the mechanism of surface reconstruction.     

The surface structure of W{100} (2 × 2)R45°

In a recent paper Tung, Graham and Melmed [Surface Sci. 115 (1982) 576] have suggested, on the basis of field ion and field evaporation microscopy, that an important ingredient of the W{100} $\text{(}\text{2}\text{×}\text{2}\text{)R45°}$ structure seen in LEED is distortion of the top W atom layer perpendicular to the surface. It is pointed out that the previously ascribed space group symmetry of p2mg rules out this possibility. A reassessment of the qualitative LEED data leading to this space group assignment indicates that while some small element of perpendicular distortion cannot be totally excluded, the amplitude of this differential distortion must be very much less than 0.1 Å.     

A new transition metal diphosphide α-MoP2 synthesized by a high-temperature and high-pressure technique

Monoclinic $\alpha $-MoP$_{2}$, with the OsGe$_{2}$-type structure (space group $C2/m$, $Z = 4$) and lattice parameters $a = 8.7248(11) $ Å, $b = 3.2322(4) $ Å, $c = 7.4724(9) $ Å, and $\beta =119.263^\circ $, was synthesized under a pressure of 4 GPa at a temperature between 1100 ${^\circ}$C and 1200 ${^\circ}$C. The structure of $\alpha $-MoP$_{2}$ and its relationship to other transition metal diphosphides are discussed. Surprisingly, the ambient pressure phase orthorhombic $\beta $-MoP$_{2}$ (space group Cmc2$_{1}$) is denser in structure than $\alpha $-MoP$_{2}$. Room-temperature high-pressure x-ray diffraction studies exclude the possibility of phase transition from $\beta $-MoP$_{2}$ to $\alpha $-MoP$_{2}$, suggesting that $\alpha $-MoP$_{2}$ is a stable phase at ambient conditions; this is also supported by the total energy and phonon calculations.     

Bulk-like structure of diamond {111}

A LEED (low-energy electron diffraction) intensity analysis of C {111} 1 × 1 (diamond) has given good agreement with a surface structure which has bulk positions with small relaxation of the first interlayer spacing for both insulating and semiconducting specimens. The truncated-bulk character of C{111} 1 × 1 gives support to the previously determined bulk-like structure of stabilized Si{111} 1 × 1, and casts doubt on the disordered 7 × 7 structure suggested for the stabilized 1 × 1 phase by interpretation of photoemission measurements. In both cases rather than doubt the LEED structure, one can doubt the interpretation of the photoemission measurements.     

Radiation damage in single-crystal ice studied by 100 keV proton channeling

A detailed study has been undertaken of the Ni{100} (2 × 2)C structure formed by cracking ethylene on a clean Ni{100} surface. The LEED pattern shows characteristic missing spots which can be attributed to the presence of glide lines and indicate a space group symmetry of p4g. We show that this can be readily interpreted in terms of a distortion of the top nickel layer both parallel and perpendicular to the surface, which accompanies the carbon adsorption. Detailed comparisons of LEED intensity data with dynamical calculations indicate that the top layer nickel atoms are displaced 0.35 ± 0.05 Å parallel to the surface, 0.20 ± 0.05 Å outwards from the surface, and that the carbon atoms are in 4-fold hollows (now distorted) at a spacing of 0.1 ± 0.1 Å from the surface. These conclusions lead to a nickel-carbon nearest neighbour spacing of 1.803 ± 0.015 Å.     

Atomic structure of Cu{0 0 1}c(2 × 2)-Cl

A LEED intensity analysis of Cu{0 0 1}c(2 × 2)-Cl has given an excellent fit of theory to experiment with Cl in the fourfold symmetrical hollows in a simple overlayer structure with a Cu-Cl bond length of 2.38 Å. This structure is consistent with an analysis of angle-resolved photoemission measurements made in the same experiments and published elsewhere. These results help confirm the LEED analysis of the analogous system Ag{0 0 1}c(2 × 2)-Cl which gave the same structure, but had been rejected by an independent photoemission analysis.     

用低能电子衍射研究氢在Si(100)表面吸附引起的相变

描述了用低能电子衍射(LEED)研究不同温度下在Si(100)-c(8×8)表面吸氢引起的一系列相变过程。实验发现:在液氮温度下,在Si(100)-c(8×8)表面连续吸氢将引起表面经Si(100)-(4×1)-H向(2×1)-H最终向(1×1)-H转变;而在从700℃到室温间的不同温度下饱和吸氢,实验中观察到:Si(100)-c(8×8)表面将先转变至Si(100)-c(4×4)-H,然后至(2×1)-最终至(1×1)-H。     

NH3-induced c(4 × 2) to (2 × 2) transition on the Ge(001) surface by a domino-like dimer flip

Under the conditions of thermodynamic adsorption-desorption equilibrium, the first strongly bound molecular adsorption state of ammonia on Ge(001) saturates at one molecule per Ge reconstruction dimer (1/2 ML). High-resolution electron diffraction studies show that this adsorption is accompanied by a structural transition from c(4 × 2) on the clean surface to a (2 × 2) structure which is already completed for a coverage of about 0.04 ML, far below saturation. We propose a model implying the formation of NH₃ islands locally covered with 1/2 ML and a (2 × 2) periodicity caused by a flip of the dimer tilt direction of every second dimer Beyond the edge of these islands, the dimer flip continues domino-like along the dimer rows over the clean parts of the surface. Elongated (2 × 2) domains about 280–330Å long and 30–65Å wide are formed, depending on coverage.     

Hydrogen chemisorption on Pd(100) studied with he scattering

He scattering from the clean Pd(100) surface yields extremely weak diffraction beams relative to the specular, corresponding to a very small maximum corrugation amplitude of ~ 0.04 Å. Hydrogen adsorption at a temperature of 110 K leads to the formation of a c(2 × 2) ordered phase at a coverage of 0.5 monolayers and a (1 × 1) phase at saturation coverage. The maximum corrugation amplitude of the c(2 × 2)H is ~0.13 Å; surface charge density calculations using overlapping atomic charge densities indicate a normal distance of the hydrogens to the topmost Pd layer d_n ? 0.65–0.70 Å corresponding to a H-Pd bonding distance of ~ 2.05 Å in the fourfold hollow sites. The result that the maximum corrugation amplitude of the (1 × 1) hydrogen phase, with ~ 0.025 Å, even smaller than that of the clean surface may indicate a movement of the hydrogens closer to the topmost metal layer, when the coverage is increased from 0.5 monolayers to saturation.     

氮离子轰击钼(001)和钼(110)表面形成的有序结构

用能量为1千电子伏,束流为6微安的氮离子轰击含有痕量碳和氧的钼(001)和钼(110)表面10至15分钟,在俄歇能谱中出现了很强的氮的俄歇峰。从室温直到350℃退火,低能电子衍射观察表明,表面是无序层。样品加热到530℃和650℃之间,在钼(001)表面上得到c(2×2)-氮,p(2×2)-氮和(4(2^1/2)×2^1/2)R45°-氮、氧三种结构的低能电子衍射图;在密堆的钼(110)面得到单一结构的c(7×3)-氮的低能电子衍射图。低能电子衍射图与热脱附密切相关 关键词：     

Surface crystallography of W(110) and W(110) p (2×1)-O: The position of W atoms

The position of W atoms in the surface layers of clean W (110) and W (110) p (2 × 1)-O is studied using Constant-Momentum-Transfer Averaging of LEED intensities. It is shown that the clean surface is not relaxed to an uncertainty of < 0.06 Å. Analysis of superstructure beam intensity averages from W(110) p (2 × 1)-O indicates that oxygen does not reconstruct W(110) at these coverages and below 1000 ° K. An upper limit of 0.05 Å can be put on the out-of-plane displacement of W atoms by the oxygen. Substrate beam averages from W (110) p (2 × 1)-O verify the non-reconstruction. The use of CMTA for adsorbed-layer crystallography in general is briefly discussed.