Evaluation strategies for isotope ratio measurements of single particles by LA-MC-ICPMS

Data evaluation is a crucial step when it comes to the determination of accurate and precise isotope ratios computed from transient signals measured by multi-collector–inductively coupled plasma mass spectrometry (MC-ICPMS) coupled to, for example, laser ablation (LA). In the present study, the applicability of different data evaluation strategies (i.e. ‘point-by-point’, ‘integration’ and ‘linear regression slope’ method) for the computation of ²³⁵U/²³⁸U isotope ratios measured in single particles by LA-MC-ICPMS was investigated. The analyzed uranium oxide particles (i.e. 9073-01-B, CRM U010 and NUSIMEP-7 test samples), having sizes down to the sub-micrometre range, are certified with respect to their ²³⁵U/²³⁸U isotopic signature, which enabled evaluation of the applied strategies with respect to precision and accuracy. The different strategies were also compared with respect to their expanded uncertainties. Even though the ‘point-by-point’ method proved to be superior, the other methods are advantageous, as they take weighted signal intensities into account. For the first time, the use of a ‘finite mixture model’ is presented for the determination of an unknown number of different U isotopic compositions of single particles present on the same planchet. The model uses an algorithm that determines the number of isotopic signatures by attributing individual data points to computed clusters. The ²³⁵U/²³⁸U isotope ratios are then determined by means of the slopes of linear regressions estimated for each cluster. The model was successfully applied for the accurate determination of different ²³⁵U/²³⁸U isotope ratios of particles deposited on the NUSIMEP-7 test samples.     

The determination of235U/238U ratios by activation analysis utilizing high resolution γ-spectrometry

The application of high resolution γ-spectrometry to the direct determination of²³⁵U/²³⁸U isotopic ratios in small uranium samples after neutron activation is reported. The consistency obtained relative to mass spectrometrically determined isotopic ratios is better than 5% for isotopic ratios between 0.06885 and 1.095. The method is not subject to the main disadvantages of the known radiochemical methods for²³⁵U/²³⁸U isotopic ratio determinations, and should be appreciably more rapid compared to the solid-source mass spectrometric method giving the same precision.     

Isotopic and ultratrace analysis of uranium by double-focusing sector field ICP mass spectrometry

An analytical method for the ultratrace and isotopic analysis of uranium in radioactive waste samples using a double-focusing sector field ICP mass spectrometer is described. In high-purity water a detection limit for uranium in the lowest fg/mL range has been achieved. Under optimum experimental conditions (²³⁵U/²³⁸U ≈ 1), the precision in ²³⁵U/²³⁸U isotopic ratio determinations has been determined as 0.07% RSD. With the isotopic standard U-020 (²³⁵U/²³⁸U = 0.0208) a precision of 0.23% RSD at the 100 pg/mL level using ultrasonic nebulization has been achieved. With ²³⁴U/²³⁸U isotopic ratios of down to 10^–5, the values obtained by double-focusing sector field ICP-MS and alpha spectrometry were in agreement. Received: 27 February 1997 / Revised: 10 Juni 1997 / Accepted: 12 June 1997     

Determination of U isotope ratios in sediments using ICP-QMS after sample cleanup with anion-exchange and extraction chromatography

The determination of uranium is important for environmental radioactivity monitoring, which investigates the releases of uranium from nuclear facilities and of naturally occurring radioactive materials by the coal, oil, natural gas, mineral, ore refining and phosphate fertilizer industries, and it is also important for studies on the biogeochemical behavior of uranium in the environment. In this paper, we describe a quadrupole ICP-MS (ICP-QMS)-based analytical procedure for the accurate determination of U isotope ratios (²³⁵U/²³⁸U atom ratio and ²³⁴U/²³⁸U activity ratio) in sediment samples. A two-stage sample cleanup using anion-exchange and TEVA extraction chromatography was employed in order to obtain accurate and precise ²³⁴U/²³⁸U activity ratios. The factors that affect the accuracy and precision of U isotope ratio analysis, such as detector dead time, abundance sensitivity, dwell time and mass bias were carefully evaluated and corrected. With natural U, a precision lower than 0.5% R.S.D. for ²³⁵U/²³⁸U atom ratio and lower than 2.0% R.S.D. for ²³⁴U/²³⁸U activity ratio was obtained with less than 90 ng uranium. The developed analytical method was validated using an ocean sediment reference material and applied to an investigation into the uranium isotopic compositions in a sediment core in a brackish lake in the vicinity of U-related nuclear facilities in Japan.     

Comparison of AMS,TIMS, and SIMS techniques for determining uranium isotope ratios in individual particles

The determination of isotope ratios in individual uranium particles is very important for nuclear safeguards. In this work, accelerator mass spectrometry (AMS), thermal ionization mass spectrometry (TIMS), and secondary ion mass spectrometry (SIMS) were applied to isotope ratio analysis of individual uranium particles and compared in terms of background, measurement accuracy, and efficiency. Several individual uranium particles (1–7 μm) from certified reference materials were used as samples. The results show that the average values of blank counting rate of ²³⁵U for AMS, FT-TIMS (FT: fission track), SEM-TIMS (SEM: scanning electron microscope), and SIMS were 7.3, 7.8, 2.7 and 2.2 cps, respectively. The relative error of ²³⁴U/²³⁵U and ²³⁴U/²³⁶U isotope ratios of the particles from U200 for AMS were within 10% and 20%, whereas the results of FT-TIMS and SIMS were within 5% and 10%, respectively. The relative error and external precision of ²³⁴U/²³⁸U and ²³⁵U/²³⁸U of the particles from U850 for the method of AMS, SEM-TIMS, and SIMS were within 10% and 5%, respectively. For ²³⁶U/²³⁸U, the average values of the relative error and external precision measured by AMS were within 5%, which measured by SEM-TIMS and SIMS were all within 10%. AMS has advantages in measuring ²³⁶U/²³⁸U. The measurement time of AMS and SEM-TIMS was shorter than that of FT-TIMS and longer than that of SIMS. It is considered that AMS and SEM-TIMS have a certain development prospect, and it is necessary to research deeply.     

Performance of laser ablation: quadrupole-based ICP-MS coupling for the analysis of single micrometric uranium particles

In this paper we describe the application of laser ablation-inductively coupled plasma-mass spectrometry (LA-ICP-MS) coupling to particle analysis, i.e., the determination of the isotopic composition of micrometric uranium particles. The performances of this analysis technique are compared with those of the two reference particle analysis techniques: secondary ion mass spectrometry (SIMS) and fission track-thermo-ionization mass spectrometry (FT-TIMS), based on the measurement of the isotopic ratios of ²³⁵U/²³⁸U in particles present in an inter-comparison particulate sample. The agreement of the results obtained using LA-ICP-MS with target values and with the results obtained using FT-TIMS and SIMS was good. Accuracy was equivalent to that of the other two techniques (±3 % deviation). However, relative experimental uncertainties present with LA-ICP-MS (7 %) were higher than those present with FT-TIMS (4.5 %) and SIMS (3 %). Furthermore, measurement yield of LA-ICP-MS coupling was close to that obtained with the same quadrupole ICP-MS for the measurement of a liquid sample (~10^?4), but lower than that obtained with FT-TIMS and SIMS, respectively, by a factor of 10 and 20, although the particles analyzed using LA-ICP-MS were most likely smaller (diameter ~0.6 μm, containing 4–7 fg of ²³⁵U). Nevertheless, thanks to the brevity of the signals obtained, the detection capacity for low isotopic concentrations by LA-ICP-MS coupling is equivalent to that of FT-TIMS, although it remains well below that of SIMS (×15). However, with more sensitive double focusing ICP-MS, performances equivalent to those achieved using SIMS could be obtained.     

Isotopic analysis of uranium by neutron activation and high resolution gamma ray spectrometry

A method is described for the non-destructive and accurate determination of the isotopic composition of uranium by activation analysis. The high resolving power of Ge(Li) detectors permits easy identification on a single gamma spectrum of the gamma peaks of²³⁹Np formed from²³⁸U by activation and those of fission products formed from²³⁵U. The ratio of the peak intensities is proportional to the²³⁸U/²³⁵U ratio in the sample. A precision of ±0.6% has been obtained.     

Determination of U/U atom ratio in uranium samples using liquid scintillation counting (LSC)

A correlation has been developed for the determination of ²³⁵U/²³⁸U atom ratio in uranium samples using liquid scintillation counting (LSC). The ²³⁵U/²³⁸U atom ratio determined by thermal ionization mass spectrometry (TIMS) was correlated to the ratio of (i) α-count rate and (ii) Cerenkov count rate due to ^234mPa in the sample; both measured by LSC. This correlation is linear over the range of ²³⁵U/²³⁸U atom ratio encountered in the nuclear fuel samples, i.e. the low enriched uranium (LEU) samples with ²³⁵U < 20 atom%. The methodology based on this correlation will be useful for the quick determination and verification of ²³⁵U/²³⁸U atom ratios in fuel samples using cost effective technique of LSC.     

Application of Inductively Coupled Plasma Mass Spectrometry to the determination of uranium isotope ratios in individual particles for nuclear safeguards

The capability of inductively coupled plasma mass spectrometry (ICP-MS) for the determination of uranium isotope ratios in individual particles was determined. For this purpose, we developed an experimental procedure including single particle transfer with a manipulator, chemical dissolution and isotope ratio analysis, and applied to the analysis of individual uranium particles in certified reference materials (NBL CRM U050 and U350). As the result, the ²³⁵U/²³⁸U isotope ratio for the particle with the diameter between 0.5 and 3.9 μm was successfully determined with the deviation from the certified ratio within 1.8%. The relative standard deviation (R.S.D.) of the ²³⁵U/²³⁸U isotope ratio was within 4.2%. Although the analysis of ²³⁴U/²³⁸U and ²³⁶U/²³⁸U isotope ratios gave the results with inferior precision, the R.S.D. within 20% was possible for the measurement of the particle with the diameter more than 2.1 μm. The developed procedure was successfully applied to the analysis of a simulated environmental sample prepared from a mixture of indoor dust (NIST SRM 2583) and uranium particles (NBL CRM U050, U350 and U950a). From the results, the proposed procedure was found to be an alternative analytical tool for nuclear safeguards.     

The use of LA-SF-ICP-MS for nuclear forensics purposes: uranium isotope ratio analysis

This work describes the utilization of the laser ablation sector field inductively coupled plasma mass spectrometry (LA-SF-ICP-MS) technique for the determination of uranium isotopic composition in a highly enriched uranium sample. The measurements were performed on a continuous ablation with low energy density and defocusing, which demonstrated to be the optimum to reach the best signal stability. The measurements were improved by adjusting the following parameters: RF power, laser beam diameter, defocusing of laser beam, laser energy, laser energy density, auxiliary gas and sample gas. The ²³⁵U/²³⁸U isotope ratio with its respective uncertainty was 16.36 ± 0.15 and its precision was 1.12 % relative standard deviation. The uncertainties were estimated following the ISO GUM, with a confidence level of 95.45 % (k = 2.00). When compared the isotope abundances to the Round Robin Exercise Number 3’s average results a difference of 0.46 % has been found and when compared to supplier’s value, the difference was 0.41 %. The results presented by the measurements revealed that the LA-ICP-MS technique offers a rapid and accurate alternative to measure uranium isotope ratios without any sample preparation, since it allows carrying out the measurements straight on the sample. Moreover, it preserves the testimony—very important for safeguards and nuclear forensics purposes.     

Improvement in precision of extremely low <Superscript>236</Superscript>U/<Superscript>238</Superscript>U isotope ratio determination by using mass spectrometer with narrow dynamic range

The precision in measurement of trace level uranium isotopic ratio, i.e., ²³⁶U/²³⁸U or ²³⁴U/²³⁸U, on single Faraday detector with narrow dynamic range is very hard to achieve. this is mainly due to the narrow dynamic range of a single detector systems. A significant improvement in mass spectrometric determination of ²³⁶U/²³⁸U ratio has been achieved by employing an alternate method using a single Faraday detector of narrow dynamic range. The method makes use of the precise measurements of the ²³⁶U/²³⁴U ratio, ²³⁴U/²³⁵U ratio and ²³⁵U/²³⁸U ratio, which are used to calculate the ²³⁶U/²³⁸U ratio using the equation ²³⁶U/²³⁸U=²³⁶U/²³⁴Uײ³⁴U/²³⁵Uײ³⁵U/²³⁸U. Despite the fact that correlation of the data tends to increase the uncertainty in the result, our results show a significant improvement, i.e., more than 8 times better precision in measuring the ²³⁶U/²³⁸U ratio with this method (σ=3.98×10⁻⁰⁸) as compared to direct measurement of ²³⁶U/²³⁸U (σ=3.104×10⁻⁰⁷). The method widens the applicability of the single collector system with narrow dynamic range and it will potentially be helpful to improve the precision in the case of the static multi-collector system also. The objective of the present study was to compare the results of the same sample analyzed with the present alternate method and the direct method for precision.     

Isotopic “fingerprints” for natural uranium ore samples

A set of six samples, collected worldwide from various uranium ore mining facilities, was analysed for uranium isotopic composition by high accuracy isotope mass spectrometry. The goal of this article was twofold: to measure isotopic variations between samples of different geographical origin and to produce calibrated isotope ratios with the smallest achievable uncertainty (as defined according to the ISO Guide to the Expression of Uncertainty in Measurement). In the first step, the molar ratio of the isotopes ²³⁵U and ²³⁸U, n(²³⁵U)/n(²³⁸U), was measured using a UF₆-gas-inlet isotope mass spectrometer (VARIAN MAT 511). This instrument was calibrated against gravimetrically prepared synthetic isotope mixtures thus allowing SI-traceable measurements to be made. The ratios of the “minor isotopes” to ²³⁸U [n(²³⁴U)/n(²³⁸U) and n(²³⁶U)/n(²³⁸U)] were determined in a second step using a thermal ionisation mass spectrometer with high abundance sensitivity (Finnigan MAT262-RPQ-PLUS). The mass-fractionation correction was done internally using the result of the n(²³⁵U)/n(²³⁸U) measurement. As a result, the complete measured uranium isotopic composition is traceable to the SI system. For all ratios n(²³⁴U)/n(²³⁸U), n(²³⁵U)/n(²³⁸U), and n(²³⁶U)/n(²³⁸U) significant differences for samples of different origin were found. Regarding the n(²³⁶U)/n(²³⁸U) results, only two samples, one of them from the Oklo reactor in Gabon, showed significant presence of ²³⁶U. For all other samples an upper limit for n(²³⁶U)/n(²³⁸U) of about 6 × 10⁻¹⁰, mainly dependent on the instrumentation, was found. As a result of this study we propose values for the isotope abundances of natural uranium for the “Best Measurement from a Single Terrestrial Source” and the “Range of Natural Variations” in the IUPAC-table of the “Isotopic Composition of the Elements.”     

Evaluation of a new generation quadrupole-based ICP-MS for uranium isotopic measurements in environmental samples

We compare the analytical performance of a modern quadrupole-based ICP-MS (“X-Series”, Thermo-Electron, Winsford, UK) with a single-collector double-focusing sector-field ICP-MS (“Axiom”, VG Elemental, Winsford, UK) for uranium isotopic measurements in environmental samples. We focus on the precision and accuracy obtained with both instruments for the ²³⁵U/²³⁸U isotopic ratios and on the abundance sensitivity that is a key parameter for low ²³⁶U/²³⁸U isotopic ratios measurements. We observe that isotopic measurements are more precise accurate with the “X-Series” than with the “Axiom”. Besides, we demonstrate that the “Axiom’s” higher abundance sensitivity limits its capability to measure ²³⁶U/²³⁸U ratio below a few ppm.     

Determination of uranium isotopes in environmental samples

The determination of isotopes of uranium by alpha spectrometry in different environmental components (sediments, soil, water, plants and phosphogypsum) is presented and discussed in this paper. The alpha spectrometry is a very convenient and good technique for activity concentration of natural uranium isotopes (²³⁴U, ²³⁵U, ²³⁸U) in environmental samples and provides the most accurate determination of isotopic activity ratios between ²³⁴U and ²³⁸U. The analysis were provided information about possible sources of high concentrations of uranium in the examined sites determined by anthropogenic sources. The calculation of values ²³⁴U/²³⁸U in all analyzed samples was applied to identifying natural or anthropogenic uranium origin. Activity concentration of uranium isotopes in analyzed environmental samples shows that measurement of uranium levels is of great importance for environmental and safety assessment especially in contaminated areas (phosphogypsum waste heap).     

Comparison of ICP-MS and SIMS techniques for determining uranium isotope ratios in individual particles

The determination of uranium isotope ratios in individual particles is of great importance for nuclear safeguards. In the present study, an analytical technique by inductively coupled plasma mass spectrometry (ICP-MS) with a desolvation sample introduction system was applied to isotope ratio analysis of individual uranium particles. In ICP-MS analysis of individual uranium particles with diameters ranging from 0.6 to 4.2 μm in a standard reference material (NBL CRM U050), the use of the desolvation system for sample introduction improved the precision of ²³⁴U/²³⁸U and ²³⁶U/²³⁸U isotope ratios. The performance of ICP-MS with desolvation was compared with that of a conventionally used method, i.e., secondary ion mass spectrometry (SIMS). The analysis of test swipe samples taken at nuclear facilities implied that the performance of ICP-MS with desolvation was superior to that of SIMS in a viewpoint of accuracy, because the problems of agglomeration of uranium particles and molecular ion interferences by other elements could be avoided. These results indicated that ICP-MS with desolvation has an enough ability to become an effective tool for nuclear safeguards.     

Isotope ratio analysis on micron-sized particles in complex matrices by Laser Ablation-Absorption Ratio Spectrometry

Laser ablation has been combined with dual tunable diode laser absorption spectrometry to measure ¹⁵²Gd:¹⁶⁰Gd isotope ratios in micron-size particles. The diode lasers are tuned to specific isotopes in two different atomic transitions at 405.9 nm (¹⁵²Gd) and 413.4 nm (¹⁶⁰Gd) and directed collinearly through the laser ablation plume, separated on a diffraction grating, and detected with photodiodes to monitor transient absorption signals on a shot-by-shot basis. The method has been characterized first using Gd metal foil and then with particles of GdCl₃·xH₂0 as binary and ternary mixtures with ¹⁵²Gd:¹⁶⁰Gd isotope ratios ranging from 0.01 to 0.43. These particulate mixtures have been diluted with Columbia River sediment powder (SRM 4350B) to simulate environmental samples and we show the method is capable of detecting a few highly-enriched particles in the presence of a >100-fold excess of low-enrichment particles, even when the Gd-bearing particles are a minor component (0.08%) in the SRM powder and widely dispersed (1178 particles detected in 800,000 ablation laser shots). The implications for monitoring ²³⁵U:²³⁸U enrichment ratios in airborne particle samples, as related to the nuclear industry, are discussed.     

Uranium series disequilibrium in the coastal surface sediments and sea water of the Arabian Sea

Nearshore surface sediments from various locations of the West Coast of India were leached by saturated ammonium carbonate solution for the extraction of uranium isotopes. The reagent chosen was found to have high efficiency for leaching uranium isotopes without attacking the mineral core of the sediment particle. The activity ratios of²³⁴U/²³⁸U are in the range of 1.11 to 1.14 and the activity ratios of²³⁵U/²³⁵U are in the range of 0.045 to 0.047. The respective activity ratios in leachates, and residues after removal of surface organic matter from the sediment particles by treatment with hydrogen peroxide and 0.05M HCl, revealed disequilibrium between²³⁸U and²³⁴U only in the surface organic matter. The activity ratios of²³⁴U/²³⁸U and²³⁵U/²³⁸U have also been determined in some seawater samples from the Arabian Sea.     

Development of a SIMS Method for Isotopic Measurements in Nuclear Forensic Applications

 Methodologies based on secondary ion mass spectrometry (SIMS) for isotopic measurements in nuclear forensic applications relevant to the age determination of Pu particles and isotopic composition of oxygen for geolocation assignment are described. For the age determination of Pu particles, a relative sensitivity factor (RSF) to correct for the different ionisation efficiencies of U and Pu, was obtained by analysing standard Pu materials with known ages. An RSF of 2.41±0.05 was obtained for PuO₂ from measurements on samples with different Pu/U ratios. In a sample of known origin, using this RSF value, the age calculated from the ²³⁸Pu/²³⁴U and ²⁴⁰Pu/²³⁶U ratios agreed well with the reported age of 2.3 years. For geolocation assignment, a new approach based on the measurement of differences in the natural abundance of ¹⁸O and ¹⁶O isotopes and their ratio was developed. The instrumental mass discrimination of the ¹⁸O/¹⁶O ratio was determined using three O-isotope samples of different chemical composition. The measured precision (the standard error of 100 cycles/analysis) obtained for the oxygen isotopic measurement on the samples was typically ±1.1‰.     

Biomonitoring of essential and toxic metals in single hair using on-line solution-based calibration in laser ablation inductively coupled plasma mass spectrometry

Laser ablation inductively coupled plasma mass spectrometry (LA-ICP-MS) has been established as a powerful and sensitive surface analytical technique for the determination of concentration and distribution of trace metals within biological systems at micrometer spatial resolution. LA-ICP-MS allows easy quantification procedures if suitable standard references materials (SRM) are available. In this work a new SRM-free approach of solution-based calibration method in LA-ICP-MS for element quantification in hair is described. A dual argon flow of the carrier gas and nebulizer gas is used. A dry aerosol produced by laser ablation (LA) of biological sample and a desolvated aerosol generated by pneumatic nebulization (PN) of standard solutions are carried by two different flows of argon as carrier or nebulizer gas, respectively and introduced separately in the injector tube of a special ICP torch, through two separated apertures. Both argon flows are mixed directly in the ICP torch. External calibration via defined standard solutions before analysis of single hair was employed as calibration strategy. A correction factor, calculated using hair with known analyte concentration (measured by ICP-MS), is applied to correct the different elemental sensitivities of ICP-MS and LA-ICP-MS. Calibration curves are obtained by plotting the ratio of analyte ion M⁺/³⁴S⁺ ion intensities measured using LA-ICP-MS in dependence of analyte concentration in calibration solutions. Matrix-matched on-line calibration in LA-ICP-MS is carried out by ablating of human hair strands (mounted on a sticky tape in the LA chamber) using a focused laser beam in parallel with conventional nebulization of calibration solutions. Calibrations curves of Li, Na, Mg, Al, K, V, Cr, Mn, Fe, Ni, Co, Cu, Zn, Sr, Mo, Ag, Cd, I, Hg, Pb, Tl, Bi and U are presented. The linear correlation coefficients (R) of calibration curves for analytes were typically between 0.97 and 0.999. The limits of detection (LODs) of Li, V, Mn, Ni, Co, Cu, Sr, Mo, Ag, Ba, Cd, I, Hg, Pb, Bi and U in a single hair strand were in the range of 0.001-0.90 μg g⁻¹, whereas those of Cr and Zn were 3.4 and 5.1 μg g⁻¹, respectively. The proposed quantification strategy using on-line solution-based calibration in LA-ICP-MS was applied for biomonitoring (the spatial resolved distribution analysis) of essential and toxic metals and iodine in human hair and mouse hair.     

Measurement of uranium isotope ratios in solid samples using laser ablation and diode laser-excited atomic fluorescence spectrometry

A diode laser is used for the selective excitation of ²³⁵U and ²³⁸U in a laser-induced plasma applying Nd:YAG laser pulses to UO₂ samples. The diode laser is rapidly scanned immediately following each laser sampling and the resonance atomic fluorescence spectrum for both isotopes is obtained on a pulse-to-pulse basis. Time-integrated measurements, with the diode laser fixed at either isotope, were also made. Optimum signal-to-noise was obtained at a distance of 0.8 cm from the sample surface, a pressure of 0.9 mbar and a Nd:YAG laser pulse energy of 0.5 mJ (880 MW cm⁻²). Three samples with 0.204, 0.407 and 0.714% ²³⁵U were measured. For example, for the UO₂ pellet with the natural uranium isotopic composition (99.281% ²³⁸U and 0.714% ²³⁵U), the accuracy and precision were 7% and 5% (460 shots), respectively, limited by the continuum emission background from the laser-induced plasma.