Selective dissolution of the silver component in colloidal Au and Ag multilayers: a facile way to prepare nanoporous gold film materials

Colloidal Au/Ag multilayer films were prepared by alternate assembly of Au nanoparticles with a size of 5 +/- 1.2 nm and Ag nanoparticles with a size of 10 +/- 2.4 nm by using 1,5-pentanedithiol as cross-linker. Nanoporous gold films with a ligament size of 26.7 +/- 4.6 nm were then prepared by selective dissolution of sacrificial templates of silver particles in colloidal Au/Ag multilayers. The complete dissolution of Ag particles in colloidal Au/Ag multilayers in a mixture solution of 3.0 mM HAuCl(4) and 3 M NaCl took place at room temperature without damage of the colloidal Au film. This method to prepare nanoporous gold films was further extended to the preparation of nanoporous gold nanotubes by depositing colloidal Au/Ag film on the inner wall of anodic aluminum oxides (AAO) followed by dissolution of colloidal Ag and removal of AAO templates.     

Electrochemical modification of surface morphology of Au/Ti bilayer films deposited on a Si prism for in situ surface-enhanced infrared absorption (SEIRA) spectroscopy

Surface-enhanced infrared absorption (SEIRA)-active Au/Ti bilayer films sputter deposited on Si substrates have been prepared by an electrochemical annealing (ECA) treatment for the first time. The application of Au/Ti bilayer films on Si substrates to the spectroscopic technique is a promising alternative to the conventional technique using directly deposited Au films on Si substrates, offering excellent adhesive durability of the deposited metal films. However, Au/Ti bilayer films have never been selected for the spectroscopy technique because the films in the as-prepared state exhibit relatively smooth surface morphology: the excitation of the localized surface plasmon is vital to achieving SEIRA enhancements but could hardly be observed on the smooth morphology. It is shown by ex situ scanning tunneling microscopy measurements that the unfavorable smooth morphology of the as-prepared Au/Ti bilayer films can be modified by the ECA treatment to a reasonably rough, island-structure morphology similar to that of the conventional SEIRA-active Au films. In situ infrared absorption spectroscopy of adsorbed sulfate anions has been conducted on the Au/Ti bilayer film both before and after ECA treatment. The spectroscopy measurements demonstrate that the SEIRA activity of the film after being subjected to the treatment is significantly improved so that the technique could detect adsorbates on the film electrodes even with the submonolayer coverage. As an additional benefit, the ECA treatment has brought about a substantial increase in the fraction of Au(111) domains on the polycrystalline Au film surfaces. Accordingly, this approach enables us to prepare SEIRA-active Au films having sufficient adhesion to the Si substrates as well as the highly preferred (111) orientation.     

Crystallographic and morphological characterization of thin pentacene films on polycrystalline copper surfaces

The degree of crystallinity, the structure and orientation of crystallites, and the morphology of thin pentacene films grown by vapor deposition in an ultrahigh vacuum environment on polycrystalline copper substrates have been investigated by x-ray diffraction and tapping-mode scanning force microscopy (TM-SFM). Depending on the substrate temperature during deposition, very different results are obtained: While at 77 K a long-range order is missing, the films become crystalline at elevated temperatures. From a high-resolution x-ray-diffraction profile analysis, the volume-weighted size of the crystallites perpendicular to the film surface could be determined. This size of the crystallites increases strongly upon changing temperature between room temperature and 333 K, at which point the size of individual crystallites typically exceeds 100 nm. In this temperature region, three different polymorphs are identified. The vast majority of crystallites have a fiber texture with the (001) net planes parallel to the substrate. In this geometry, the molecules are oriented standing up on the substrate (end-on arrangement). This alignment is remarkably different from that on single-crystalline metal surfaces, indicating that the growth is not epitaxial. Additionally, TM-SFM images show needlelike structures which suggest the presence of at least one additional orientation of crystallites (flat-on or edge-on). These results indicate that properties of thin crystalline pentacene films prepared on technologically relevant polycrystalline metal substrates for fast electronic applications may be compromised by the simultaneous presence of different local molecular aggregation states at all temperatures.     

Studies on the Structure of Gel during Preparing ZnO Thin Films by Sol-gel Method

<正>Transparent thin films of ZnO have been prepared on ordinary glass substrates by the inorganic sol-gel method using citric acid as chelating agent and zinc nitrate as the starting material.A novel structure on zinc citrate complex was put forward by using DTA-TG and FT-IR absorbance spectrum of citrate gels.Phase formation,morphology and optical properties of ZnO films are investigated by XRD,AFM and UV-vis transmittance spectra.The experimental results show that ZnO thin films derived from zinc citrate sol-gel method showed a(002)oriented hexagonal wurtzite structure,good crystalline property,a uniform range of grain size(40 nm), smooth surface of films,band gap of 3.28 eV and optical transmittances ratio over 90%in the visible range.     

Growth of c‐axis‐oriented aluminum nitride thin films onto different substrates and buffer layers

The growth of aluminum nitride thin films onto various substrates (glass, flexible polyimide, or silicon) and onto different buffer layers (Au, Nb, Cu, Ag, Co, Fe, NiFe, or IrMn) is reported. Samples grown on IrMn, Co, NiFe, Nb, or Au show smooth surfaces. This same smooth quality is observed in samples grown at a lower 200 °C temperature directly on glass, Si, or flexible polyimide. In applications where thin and smooth piezoelectric films are necessary, c‐axis‐oriented AlN can be grown onto a wide range of different surfaces: conducting, insulating, ferromagnetic, antiferromagnetic, or flexible. Copyright © 2014 John Wiley & Sons, Ltd.     

Forming extremely smooth ZnO thin film on silicon substrates for growth of large and well-aligned ZnO rods with the hydrothermal method

Sol–gel zinc oxide (ZnO) thin films generally have non-uniform stripes. After annealing at high temperatures, these thin films are rough and granular. When ZnO rods are grown on such rough and non-uniform surface with the hydrothermal method, collimation, crystalline structure, and defect density are very poor. Here we explore a method to solve this problem. The ZnO thin film is first coated with an Au layer to prohibit the vertical extension of crystallization during the annealing period. As a result, the surface morphology of ZnO thin film is very flat and uniform after annealing. Afterwards, the ZnO rods are grown on the flat and uniform thin film, which gives rise to ZnO rods with very good collimation and crystalline structure. The extremely flat ZnO thin film even enables the fabrication of patterned ZnO rod arrays with regular shapes through lithography.     

Growth of crystalline rubrene films with enhanced stability

The growth of well-oriented crystalline films of rubrene (C42H28) on SiO2 and Au111 substrates is achieved by employing "hot wall" deposition whereas organic molecular beam deposition (OMBD) only yields rather amorphous layers or poly-crystalline dendritic networks at elevated temperature. This pronounced difference in film growth is related to the conformational change of rubrene molecules involving a loss of chirality upon crystallization and the enhanced diffusion which becomes possible at high temperature and large vapor pressure. Moreover, it is demonstrated that the crystalline rubrene films reveal an enhanced thermal and chemical stability as compared to the OMBD grown films.     

Preparation and Magnetic Properties of Submicron CrO2 Thin Film on Poly-crystal TiO2 Film

The submicron chromium dioxide(CrO₂) thin film was fabricated on a poly-crystal titania(TiO₂) film using Si wafers as substrates by atmospheric pressure chemical vapor deposition(CVD) method. X-Ray diffraction patterns show that the CrO₂ films were pure rutile structure. Scanning electron microscopy(SEM) images indicate that the CrO₂ films consisted of submicron grains with a grain size of 250―750 nm. The magnetic researches reveal that the magnetic easy axis is parallel to the films, and at room temperature, the CrO₂ films show linear magnetoresistance.     

Silica-stabilized gold island films for transmission localized surface plasmon sensing

Ultrathin gold films prepared by evaporation of sub-percolation layers (typically up to 10 nm nominal thickness) onto transparent substrates form arrays of well-defined metal islands. Such films display a characteristic surface plasmon (SP) absorption band, conveniently measured by transmission spectroscopy. The SP band intensity and position are sensitive to the film morphology (island shape and inter-island separation) and the effective dielectric constant of the surrounding medium. The latter has been exploited for chemical and biological sensing in the transmission localized surface plasmon resonance (T-LSPR) mode. A major concern in the development of T-LSPR sensors based on Au island films is instability, manifested as change in the SP absorbance following immersion in organic solvents and aqueous solutions. The latter may present a problem in the use of Au island-based transducers for biological sensing, usually carried out in aqueous media. Here, we describe a facile method for stabilizing Au island films while maintaining a high sensitivity of the SP absorbance to analyte binding. Stabilization is achieved by coating the Au islands with an ultrathin silica layer, ca. 1.5 nm thick, deposited by a sol-gel procedure on an intermediate mercaptosilane monolayer. The silica coating is prepared using a modified literature procedure, where a change in the reaction conditions from room temperature to 90 degrees C shortened the deposition time from days to hours. The system was characterized by UV-vis spectroscopy, ellipsometry, XPS, HRSEM, AFM, and cyclic voltammetry. The ultrathin silica coating stabilizes the optical properties of the Au island films toward immersion in water, phosphate buffer saline (PBS), and various organic solvents, thus providing proper conditions where the optical response is sensitive only to changes in the effective dielectric constant of the immediate environment. The silica layer is thin enough to afford high T-LSPR sensitivity, while the hydroxyl groups on its surface enable chemical modification for binding of receptor molecules. The use of silica-encapsulated Au island films as a stable and effective platform for T-LSPR sensing is demonstrated.     

Phase transition properties of vanadium oxide films deposited by polymer-assisted deposition

Vanadium dioxide (VO₂) films were synthesized on mica substrates by a polymer-assisted deposition method, followed by rapid annealing with different annealing temperatures. The crystalline structure and morphology of the films were investigated by XRD and FE-SEM, and their phase transition properties were studied by in situ FT-IR. The results indicated that the annealing temperature affected the crystalline structure and morphology of the films remarkably, which then resulted in varied phase transition properties. In particular, the films annealed at higher temperature showed more polycrystalline structure, increased particle size and reduced phase transition intensity. But the films exhibited the similar hysteresis temperature width with increasing annealing temperature.     

Effect of molecule-substrate interaction on thin-film structures and molecular orientation of pentacene on silver and gold

Evaporated pentacene thin films with thicknesses from several nm to 150 nm on gold and silver substrates have been studied by ultraviolet photoelectron spectroscopy (UPS), near-edge X-ray absorption fine structure (NEXAFS), scanning tunneling microscopy (STM), and atomic force microscopy (AFM). It was found that pentacene thin-film structures, particularly their molecular orientations, are strongly influenced by the metal substrates. UPS measurements revealed a distinct change in the valence band structures of pentacene on Au compared to those on Ag, which is attributed to the different packing between adjacent molecules. Using NEXAFS, we observed 74+/-5 degrees and 46+/-5 degrees molecular tilt angles on Ag and Au, respectively, for all measured thicknesses. We propose that pentacene molecules stand up on the surface and form the "thin-film phase" structure on Ag. On Au, pentacene films grow in domains with molecules either lying flat or standing up on the substrate. Such a mixture of two crystalline phases leads to an average tilt angle of 46 degrees for the whole film and the change in valence band structures. STM and distance-voltage (z-V) spectroscopy studies confirm the existence of two crystalline phases on Au with different conducting properties. z-V spectra on the low conducting phase clearly indicate its nature as "thin-film phase".     

Growth kinetics, structure, and morphology of para-quaterphenyl thin films on gold(111)

The adsorption, desorption, and growth kinetics as well as the thin film morphology and crystal structure of p-quaterphenyl (4P) grown under ultrahigh vacuum conditions on single crystalline Au(111) have been investigated. Thermal desorption spectroscopy (TDS) reveals two distinct first-order peaks attributed to monolayer desorption followed by a zero-order multilayer desorption. The saturation coverage of the full 4P monolayer has been quantitatively measured with a quartz microbalance to be 8 x 10(13) molecules/cm2. Using low energy electron diffraction the structures of the 0.5 and 1 ML (monolayer) adsorbates have been studied, showing highly regular arrangements of the 4P molecules, which are affected by the (111) surface structure. At the transition from 0.5 to 1 ML a structural compression of the overlayer has been observed. The behavior of thicker 4P films has been investigated by combined TDS-XPS (XPS-x-ray photoelectron spectroscopy). A temperature-induced recrystallization process at about 270 K has been observed for a 7 nm thick 4P film grown at 93 K, corresponding to a transition from a disordered layerlike growth to a crystalline island growth. Ex situ optical microscopy and atomic-force microscopy investigations have revealed needle-shaped 4P islands. Applying x-ray diffraction the crystalline order and epitaxial relationship of the 4P films with 30 nm and 200 nm mean thicknesses have been determined.     

Phase separation morphology of thin films of polystyrene/polyisoprene blends

We present the results of a study of the morphology of phase separation in a thin film blend of polystyrene (PS) and polyisoprene (PI) in a common solvent of toluene. The blend is quenched by rapid solvent evaporation using a spincoating technique rather than a temperature quench. The mass fraction of polystyrene is varied to determine the effect of the substrate on thin film phase separation morphology. We compare the phase separation morphology for very thin films of the PS/PI blend cast onto three different substrates: Si(001) with a native oxide layer (Si (SINGLEBOND) SiO_x), Si(001) etched in hydrofluoric acid (Si-H), and a Au/Pd alloy sputtered onto Si(001). We observe large differences between the morphologies of 1000 Å thick blend films on the Si(SINGLEBOND) SiO_x and Si-H substrates as the mass fraction is varied due to the difference in the wetting properties of PS on the two substrates. Smaller differences are observed between the films on the Si(SINGLEBOND) SiO_x and Au/Pd substrates only for film thicknesses h < 600 Å. © 1996 John Wiley & Sons, Inc.     

Characterizing the molecular order of phosphonic acid self-assembled monolayers on indium tin oxide surfaces

Self-assembled monolayers (SAMs) of alkanephosphonic acids with chain lengths between 8 and 18 carbon units were formed on thin films of indium tin oxide (ITO) sputter-deposited on silicon substrates with 400 nm thermally grown SiO(2). The silicon substrates, while not intended for use in near-IR or visible optics applications, do provide smooth surfaces that permit systematic engineering of grain size and surface roughness as a function of the sputter pressure. Argon sputter pressures from 4 to 20 mTorr show systematic changes in surface morphology ranging from smooth, micrometer-sized grain structures to <50 nm grains with 3× higher surface roughness. Near-edge X-ray absorption fine structure (NEXAFS) spectroscopy experiments are conducted for alkanephosphonic acids deposited on these wide range of ITO surfaces to evaluate the effects of these morphological features on monolayer ordering. Results indicate that long-chain SAMs are more highly ordered, and have a smaller tilt angle, than short-chain SAMs. Surprisingly, the 1-octadecyl phosphonic acids maintain their order as the lateral grain dimensions of the ITO surface shrink to ～50 nm. It is only when the ITO surface roughness becomes greater than the SAM chain length (～15 ?) that SAMs are observed to become relatively disordered.     

Cysteamine-modified ZIF-8 colloidal building blocks: Direct assembly of nanoparticulate MOF films on gold surfaces via thiol chemistry

Chemical modification of metal organic framework (MOF) nanocrystal colloids was used to endow them with chemical affinity for gold substrates. Modified nanocrystals were then used as building blocks for rapid and selective self-assembly of porous films. Cysteamine (Cys, 2-aminoetanethiol) was chosen as both chemical modulator and functionalizing agent of Zeolite Imidazolate Framework-8 (ZIF-8) MOF nanocrystals. Important parameters such as the impact of the modulator on the range of nanocrystals stability, size, polydispersity, morphology, and crystalline structure were assessed via both, small and wide angle x-ray scattering (SAXS and WAXS). Cysteamine modified ZIF-8 nanocrystals were assembled into films over conductive Au substrates and film growth was followed in-situ with Quartz Crystal Microbalance (QCM). Thiol moieties exposed out of the ZIF-8 surface after cysteamine modification, results in the formation of thiol bonds with Au conductive substrates as shown via Cyclic Voltammetry experiments. The strategy here presented allows for the synthesis of pre-designed building blocks for MOF films on metal surfaces.     

溅射功率对氧化锡薄膜结构和电化学性能的影响

应用射频磁控溅射技术在硅基底上制备氧化锡薄膜,着重研究溅射功率对薄膜结构和电化学性能的影响.XRD,SEM分析及恒电流充放电测试表明,随着溅射功率的增大,薄膜的结晶程度提高;生长速率和晶粒尺寸增大;电池的贮锂容量减少,且首圈不可逆容量损失增大.溅射功率对薄膜的电化学性能有较大的影响.     

Self-assembly of poly(ethylenimine)-capped Au nanoparticles at a toluene-water interface for efficient surface-enhanced raman scattering

Branched poly(ethylenimine) (PEI)-capped Au nanoparticles are prepared at room temperature using PEI as the reductant of hydrogen tetrachloroaurate (HAuCl4). The size of Au nanoparticles, ranging from 10 to 70 nm, is readily controlled by varying the relative amount of PEI used initially versus HAuCl4. The PEI-capped Au nanoparticles are further demonstrated to be assembled into a large area of 2-D aggregates at a toluene-water interface either by heating the mixture or by adding benzenethiol to the toluene phase at room temperature. Both films are quite homogeneous, but Au nanoparticles appear to be more closely packed in the film assembled via the mediation of benzenethiol. The optical property of the PEI-capped Au films is controlled by the amount of benzenethiol added to the toluene phase. The obtained large area of PEI-capped Au film exhibits strong SERS activity of benzenethiol and also exhibits a very intense SERS spectrum of 4-nitrobenzenethiol via a place-exchange reaction that takes place between benzenethiol and 4-nitrobenzenethiol. Because the proposed method is cost-effective and is suitable for the mass production of diverse Au films irrespective of the shapes of the underlying substrates, it is expected to play a significant role in the development of optical nanotechnology especially for surface plasmon-based analytical devices.     

微波法制备聚(苯乙烯-N-异丙基丙烯酰胺)热敏性微球

聚(N-异丙基丙烯酰胺)(PNIPAM),由于其大分子链上同时具有亲水性的酰氨基和疏水性的异丙基,使得PNIPAM的水溶液,在32℃附近具有最低临界溶液温度(LCST)．PNIPAM及其共聚物表现出相转变,产生热敏性质．利用PNIPAM的热敏性质,可以制备多种智能高分子材料．这些高分子材料在生物医学、免疫分析、     

不锈钢上液相电沉积类金刚石薄膜

以甲醇有机溶液作碳源,应用直流脉冲电化学沉积方法,在不锈钢表面制备了类金刚石碳薄膜.用原子力显微镜、扫描电镜、拉曼光谱仪和傅立叶红外吸收光谱表征该薄膜的表面形貌和结构.结果表明:经电化学沉积的含氢类金刚石碳薄膜均匀、致密,表面粗糙度小;Raman光谱在1 332.51cm-1处有一强的谱峰,与金刚石的特征谱峰相重合.加入活性添加剂,增加了电流密度,使沉积速率提高到0.5μm/h.     

Fabrication of self-organized TiO2 nanotubes from columnar titanium thin films sputtered on semiconductor surfaces

Self-organized nanotube arrays of TiO₂ have been grown from titanium (Ti) thin films deposited on p-type Si(1 0 0) substrates. Structural and morphological characterizations carried out by X-ray diffraction and scanning electron microcopy indicate that the sputtered crystalline Ti thin films used for subsequent anodization are hexagonally closed packed (hcp-Ti) and show a columnar morphology. Electrochemical anodization of the Ti films was carried out by potentiostatic experiments in 1 M H₃PO₄ + 1 M NaOH + 0.5 wt% HF electrolyte at room temperature. The TiO₂ nanotubes on a semiconductor substrate have an average tube length of approximately 560 nm, diameter in the order of 80 nm and wall thickness approximately 20 nm.