精化杂交压电固体单元的研究

基于力、电耦合问题的三类交量广义交分原理，提出了广义杂交压电单元列式。为了进一步改进单元的性能和保证单元能够通过分片检验，通过引入非协调模式、放松电学方程约束条件和单元间的弱连续性条件，建立了新的、修正的广义交分原理，在此基础上成功地引入了应力、应交的正交化插值模式，从而建立了精化杂交压电单元法，它继承了常规精化杂交单元的全部优点。文中所推导的八节点精化杂交压电固体单元列式完全避免了矩阵求逆运算，较广义杂交压电单元和杂交应力压电单元均显著提高了计算效率。数值算例表明，与同类型其他单元相比，该单元明显具有更好的对歪斜网格的适应性。     

Generalized variational principles for boundary value problem of electromagnetic field in electrodynamics

An expression of the generalized principle of virtual work for the boundary value problem of the linear and anisotropic electromagnetic field is given. Using Chien＇s method, a pair of generalized variational principles （GVPs） are established, which directly leads to all four Maxwell＇s equations, two intensity-potential equations, two constitutive equations, and eight boundary conditions. A family of constrained variational principles is derived sequentially. As additional verifications, two degenerated forms are obtained, equivalent to two known variational principles. Two modified GVPs are given to provide the hybrid finite element models for the present problem.     

Elastic dynamics variational principle for nonlinear elastic body

Based on paper, the variational principle and generalized variational principle of elastic dynamics for elastic body with nonlinear stress-strain relations are introduced in this paper. The generalized instantaneous variational principle is also raised for the mixed harmonious displacement element and the mixed harmonious stress element.     

用有限元广义混合法分析不可压缩或几乎不可压缩弹性体

不可压缩或几乎不可压缩问题在数学上表现为最小 势能原理中的某些项趋于无穷大,使得有限元方程产生病态。本文给出了不可压缩或几乎不可压缩弹性分析的广义混合变分原理,以此为基础建立了该类问题的有限元广义混合法。该变分原理的泛函中不含有上面这种奇异项,故其有限元方程不会产生病态。算例表明该有限元法可以同时进行可压缩、不可压缩或几乎不可压缩弹性分析,且精度良好;有限元常规位移法及Hermann法是该法的特例。     

A variational principle for non-linear elastodynamics and its application to the hybrid stress model

A variational principle is derived for the mixed initial-boundary value problem of non-linear elastodynamics. This principle involves stress quantities only. It is an extension of a similar one derived by Gurtin[1] for linear elastodynamics. The principle is then specialized to the class of semilinear materials, and generalized for the use in the hybrid stress model of finite element analysis. An incremental procedure for the numerical solution is described.     

弹性力学Hamilton方法广义解的适定性

首先引入了Hamilton体系中平面应力弹性力学问题正则方程的Galerkin变分方程,证明了Galerkin变分方程和目前文献中所用的Ritz变分方程的等价性,以及相应广义解的适定性,从而为目前的数值方法提供了理论基础。从证明过程中可以看到广义解实际上是Ritz变分泛函的一个鞍点。     

The application of generalized variational principle in finite element-semianalytical method

The method developed in this paper is inspired by the viewpoint in ref. [1] that sufficient attention has not been paid to the value of the generalized variational principle in dealing with the boundary conditions in the finite element method. This method applies the generalized variational principle and chooses the series constituted by spline function multiplied by sinusoidal function and added by polynomial as the approximate deflection of plates and shells. By taking the deflection problem of thin plate, it shows that this method can solve the coupling problem in the finite element-semianalytical method. Compared with the finite element method and finite stripe method, this method has much fewer unknown variables and higher precision. Hence, it proposes an effective way to solve this kind of engineering problems by minicomputer.     

一类新型受任意载荷的杂交旋转壳单元

本文从弹性力学Reissner变分原理出发推导旋转壳曲线坐标系下内分，位移的二类变量广义变分原理，依据这个原理推导一类旋转壳坐标系中具有独立横向转角的受谐和外载荷下的杂交旋转壳单元，内力模式的选用使刚度矩阵的剪切部份在薄壳情况下能反映Kirchhoff假设，并使单元刚度矩阵满秩，从而保证单元无剪切自锁和零能模式，数例证明这类单元对中厚和薄旋转壳具有良好的通用性和较高的精度。     

电磁共振腔辛有限元法

将电磁场的基本方程导向了对偶方程形式。给出了推导电磁场有限元所需相应的对偶变量变分原理。为了有限元列式的保辛，交分原理被积函数可导向对于对偶变量为对称的形式。交分原理的边界积分项对于相邻单元互相抵消。对偶变量有限元推导可避免所谓的C1连续性问题。采用对偶变量离散分析了共振腔本征值问题，离散后再消去一类变量可导出普通的广义本征值问题而求解。算例表明了对偶变量有限元分析的有效性。     

Geometrically non-linear generalized hybrid element and refined element method of non-conforming modes

A generalized hybrid method of non-conforming modes based on a non-linear generalized variational principles with relaxed interelement continuity requirements, is developed, and the plane quadrilateral geometrically non-linear element is presented, furthermore, non-linear refined element method is devised by orthogonal approach. It is shown that the refined element can improve the computational accuracy for non-conforming modes. The project supported by the National Natural Science Foundation of China     

分析力学初值问题的一种变分原理形式

明确了分析力学初值问题的控制方程,按照广义力和广义位移之间的对应关系,将 各控制方程卷乘上相应的虚量,代数相加,进而在 原空间中建立了分析力学初值问题的一种变分原理形式,即建立了分析力学初值问题的卷积 型变分原理和卷积型广义变分原理. 推导了分析力学初值问题卷积型变分原理和卷积型广义 变分原理的驻值条件. 在建立分析力学初值问题的一种变分原理形式的同时, 将变积方法推广为卷变积方法.     

偶应力问题的杂交／混合元分析

将弹性力学中Hellinger—Reissner交分原理推广到偶应力理论中，并以罚函数的形式引入其约束条件，提出了一种有效的杂交／混合单元。文中分别分析了带中心小孔平板在轴向均匀加载时的应力集中情况，以及含中问裂纹的无限平板单轴拉伸时的位移场和应力场。算例表明，该单元计算效率高，精度好，即使在材料本征长度很小时，仍然能够得到相当理想的结果。     

Subregion generalized variational principles for elastic thick plates

Tn this paper, the subregion generalized variational principle for elastic thick plates is proposed. Its main points may be stated as follows:1. Each subregion may be assigned arbitrarily as a potential region or complementary region. The subregion variational principles of potential energy, complementary energy and mixed energy represent three special forms of this principle.2. The number of independent variational variables in each sub-region may be assigned arbitrarily. Any one of the subregions may be assigned as a one-variable-region, two-variable-region or three-variable-region.3. The conjunction conditions of displacements and stresses on each interline of neighbouring subregions may be relaxed. On the basis of this principle the finite element analysis of non-conforming elements for thick plates can be formulated.Different finite element models for thick plates can be obtained by different applications of this principle. In particular,the subregion mixed variational principle for thick plates may be applied to formulating the subregion mixed finite element method for thick plates.     

薄板弯曲问题的P型杂交解析有限元方法

本文采用两套变量构造有限元试函数空间，在单元内部要求试函数精确满足平衡微分方程，在单元边界上对位移和转角分别用Ｐｅａｎｏ升阶函数插值，然后利用广义变分原理建立了一种薄板弯曲问题的Ｐ型杂交解析有限方法，与常规有限元法相比，该方法不心进行过细的网格剖分，通过增加单元插值多项式的阶数Ｐ来提高精度，此外，该方法还具有积分计算只需在单元边界上进行、单元钢度矩阵和载荷向量具有嵌入结构、协调程度可以自动控制等优     

广义对流扩散方程的隐式特征线混合元方法

提出了一个广义对流扩散方程的混合有限元方法,方程的基本变量及其空间梯度和流量在单 元内均作为独立变量分别插值. 基于胡海昌-Washizu三变量广义变分原理结合特征线法给 出了控制方程的单元弱形式. 混合元方法采用基于一点积分方案并结合可以滤掉虚假的 数值震荡的隐式特征线法. 数值结果证明了所提出的方法可以提供和四点积分同样的数 值计算结果,并能够提高计算效率.     

P-version hybrid analytical finite element method for plate bending problems

Two sets of trial functions with different variables are constructed for the admissible space of the finite element analysis. The trial functions satisfy the equilibrium differential equation inside elements, while the deflections and rotations on the edges of the elements are approximated by the Peano hierarchical interpolation functions. Then, a generalized variational principle is applied to set up the p-version hybrid analytical finite element method for plate bending problems. The accuracy of finite element computation can be improved by increasing the order of the interpolation polynomials with fixed mesh. In the finite element formulation, to obtain the stiffness matrices and the load vectors, it is only necessary to perform quadrature over the edges of the elements. These matrices and vectors possess an embedding structure. The conformability between the elements can be controlled automatically.This work is supported by the Natural Science Foundation of China and the Aeronautical Science Foundation of China.     

三维非定常可压跨声速有旋流动的统一变域变分理论

本文利用Ｃｌｅｂｓｃｈ变量,应用半反推法首次建立了三维非定常可压跨声有旋流体的广义变分原理及变分原理族,应用变域变分工具,几乎所有界面条件（包括激波、尾涡面条件等）都转化成了自然边界条件,这给有限元计算带来了很大的方便。     

A novel hybrid finite element with a hole for analysis of plane piezoelectric medium with defects

A method is presented to formulate a novel hybrid finite element to obtain accurate distributions of mechanical and electrical quantities around a hole in plane piezoelectric mediums. The complex variable method is used in conjunction with Reissner's variational principle to formulate a hybrid special element with an elliptical hole. Detailed derivations are given and numerical examples are performed to demonstrate the accuracy and efficiency of the novel special element. Accurate results around the hole boundary are obtained for infinite and finite piezoelectric medium by using proposed special element.     

广义协调元的变分基础及几何不变性

本文根据修正的势能原理推出了广义协调元列式。从而为广义协调元提供了一种变分依据。同时讨论了广义协调元的几何不变性,即单元与其节点号编序的相关性问题。在此基础上推导了一个任意四边形薄板弯曲单元,数值结果表明该单元能保证收敛,具有与单元节点号编序无关性,与现有的同类单元相比,具有较高的精度。