Novel Catalytic CO(2) Incorporation Reaction: Nickel-Catalyzed Regio- and Stereoselective Ring-Closing Carboxylation of Bis-1,3-dienes

Novel nickel-catalyzed carboxylation of bis-1,3-dienes using carbon dioxide (CO2) was investigated. In the presence of catalytic amounts of Ni(acac)2 and PPh3, various bis-1,3-dienes smoothly reacted with CO2 and an organozinc reagent (Et2Zn, Me2Zn, or Ph2Zn) under mild conditions. This catalytic carboxylation process was accompanied by carbocyclization of bis-1,3-diene followed by alkylation by an organozinc reagent to afford cyclic carboxylic acid derivatives in high yields with high regio- and stereoselectivities.     

Sequential protocol for C(sp3)-H carboxylation with CO2: transition-metal-catalyzed benzylic C-H silylation and fluoride-mediated carboxylation

One of the most challenging transformations in current organic chemistry is the catalytic carboxylation of a C(sp(3))-H bond using CO(2) gas, an inexpensive and ubiquitous C1 source. A sequential protocol for C(sp(3))-H carboxylation by employing a nitrogen-directed, metal-assisted, C-H activation/catalytic silylation reaction in conjunction with fluoride-mediated carboxylation with CO(2) was established. The carboxylation proceeded only at the benzylic C(sp(3))-Si bond, not at the aromatic C(sp(2))-Si, which is advantageous for further manipulations of the products.     

Insertion of CO2 into a palladium allyl bond and a Pd(II) catalysed carboxylation of allyl stannanes

The complex 2,6-bis[(di-t-butylphosphino)methyl]phenyl allyl palladium (PCP(tBu)Pd-allyl, 3) reacts with CO(2) in a very fast insertion reaction to give the corresponding butenoate complex. The reaction is thought to occur via a cyclic six-membered transition state (7), where the gamma-carbon of the allyl group is linked up with the CO(2)-carbon. A group of related PCP complexes were investigated as catalysts for the carboxylation of tributyl(allyl)stannane. A catalytic cycle is proposed for this reaction where the rate determining step is the transmetallation between tin and palladium. The carboxylation reaction is faster using less sterically crowded catalysts whereas the electron richness of the palladium complexes seems less important for reactivity. Thus, there was no apparent difference in reactivity between 2,6-bis[(di-phenylphosphino)methyl]phenyl palladium triflouroacetate (13) and resorcinolbis(diphenyl)phosphinite palladium triflouroacetate (10). Both of these complexes give high turnovers for the carboxylation of tributyl(allyl)stannane (80% in 16 h using a ca. 5% catalyst loading and 4 atm CO(2) pressure). On the other hand complex 3 was inactive in the catalytic carboxylation reaction.     

Conversion of pyrrole to pyrrole-2-carboxylate by cells of Bacillus megaterium in supercritical CO2

Pyrrole was converted to pyrrole-2-carboxylate in supercritical CO2 using cells of Bacillus megaterium PYR 2910, and the yield of the carboxylation reaction in supercritical CO2 was 12 times higher than that under atmospheric pressure.     

Carboxylations of alkali metal phenoxides with carbon dioxide

The reaction mechanism of the Kolbe-Schmitt reaction of phenol and 2-naphthol has been investigated. An alkali metal phenoxide-CO2 complex is not an intermediate that can be easily transformed into a carboxylic acid, such as salicylic acid (SA) and p-hydroxybenzoic acid (pHBA). A direct carboxylation of phenoxide with CO2 takes place even at room temperature, and is competitive with the formation of the CO2 complex. The resulting complex decomposes thermally (above ca. 100 degrees C) to phenoxide, which then undergoes further competitive reactions. Experiments using a carbon-13 labeled complex support a mechanism of direct carboxylation, and not the mechanism via a CO2 complex. The reactivity, C-13 NMR and MOPAC/PM3 calculations suggest a new carbonate-like structure for the CO2 complex.     

CO2 in 1-butyl-3-methylimidazolium acetate. 2. NMR investigation of chemical reactions

The solvation of CO(2) in 1-butyl-3-methylimidazolium acetate (Bmim Ac) has been investigated by (1)H, (13)C, and (15)N NMR spectroscopy at low CO(2) molar fraction (mf) (x(CO(2)) ca. 0.27) corresponding to the reactive regime described in part 1 of this study. It is shown that a carboxylation reaction occurs between CO(2) and Bmim Ac, leading to the formation of a non-negligible amount (~16%) of 1-butyl-3-methylimidazolium-2-carboxylate. It is also found that acetic acid molecules are produced during this reaction and tend to form with elapsed time stable cyclic dimers existing in pure acid. A further series of experiments has been dedicated to characterize the influence of water traces on the carboxylation reaction. It is found that water, even at high ratio (0.15 mf), does not hamper the formation of the carboxylate species but lead to the formation of byproduct involving CO(2). The evolution with temperature of the resonance lines associated with the products of the reactions confirms that they have a different origin. The main byproduct has been assigned to bicarbonate. All these results confirm the existence of a reactive regime in the CO(2)-Bmim Ac system but different from that reported in the literature on the formation of a reversible molecular complex possibly accompanied by a minor chemical reaction. Finally, the reactive scheme interpreting the carboxylation reaction and the formation of acetic acid proposed in the literature is discussed. We found that the triggering of the carboxylation reaction is necessarily connected with the introduction of carbon dioxide in the IL. We argue that a more refined scheme is still needed to understand in details the different steps of the chemical reaction in the dense phase.     

Mechanism of the Kolbe-Schmitt reaction. Structure of the intermediate potassium phenoxide-CO(2) complex

Our investigation elucidates the structure of the intermediate in the first stage of the carboxylation reaction of potassium phenoxide. Under the reduced pressure of carbon dioxide the complex is not solvated with the CO(2) molecules. Under the conditions of the carboxylation reaction the potassium phenoxide-carbon dioxide complex is solvated with one or two CO(2) molecules. One of the added CO(2) moieties performs an electrophilic attack on the benzene ring, whereas the old CO(2) moiety becomes a molecule of solvent. Our findings are in good accord with the experimental results obtained by the NMR and IR measurements.     

温和条件下金属双氮杂环卡宾配合物催化CO2直接转化为炔酸的高效均相羧化反应

近年来,催化CO2合成精细化学品的研究备受关注。本研究在温和条件下利用金属双氮杂环卡宾催化剂实现CO2与末端炔烃的直接羧化反应,并提出合理的催化机理。首先,合成制备了铜基、银基两种金属双氮杂环卡宾催化剂,实验证明银双氮杂环卡宾配合物具有较好催化活性。通过改变环境条件和底物种类,对反应条件及催化剂底物适应性进行了探究,利用核磁共振谱仪表征产物分子结构并计算直接羧化反应的催化产率。结果表明,适宜催化条件为:1.2eq Cs2CO3作为添加剂、1大气压、室温、无水溶剂和1(mmol)%催化剂用量。银基金属催化剂活性较铜基催化剂高并具有广泛的底物适应性,对苯乙炔的催化产率高达93%;对乙炔气体同样具有良好的催化活性。此类催化剂具有优良的催化活性,能催化合成丙炔酸等重要医药中间体,在工业应用上具有极大潜力和广阔前景。     

Efficient chemoselective carboxylation of aromatics to arylcarboxylic acids with a superelectrophilically activated carbon dioxide-Al(2)Cl(6)/Al system

Aromatic carboxylic acids are obtained in good to excellent yield essentially free of diaryl ketones by carboxylation of aromatics with a carbon dioxide-Al(2)Cl(6)/Al system at moderate temperatures (20-80 degrees C). To optimize reaction conditions and study the reaction mechanism, experimental variables including temperature, amount of Al(2)Cl(6)/Al, various Lewis acids, role of metal additive, carbon dioxide pressure, etc. were studied. The carboxylation reaction was found to be stoichiometric rather than catalytic, with aluminum chloride forming a dichloroaluminate of carboxylic acids. Although the carboxylation takes place using AlCl(3) itself, the presence of metal additives, especially Al, increased the yield and selectivity of carboxylic acids. Because it was not possible to distinguish between two possible mechanistic pathways of the reaction on the basis of the experimental results, theoretical calculations using density functional theory (DFT) were also carried out. One possible pathway involves an initial complex between benzene and Al(2)Cl(6), with subsequent formation of organoaluminum intermediates (PhAlCl(2) and PhAl(2)Cl(5)). The other proceeds through the formation of various complexes of CO(2) with aluminum chloride (AlCl(3))(n), n = 1-4. The calculations have shown that the organometallic pathway, leading eventually through the formation of phenylaluminum dichloride, is endothermic by 33 kcal/mol. In contrast, the preferred CO(2)-AlCl(3) complex forms in an exothermic reaction (-6.0 kcal/mol) as does CO(2)AlCl(2)(+). On the basis of both experimental and calculational findings, the most feasible reaction mechanism proposed involves superelectrophilic aluminum chloride activated carbon dioxide reacting with the aromatics in a typical electrophilic substitution.     

Ligand-directed reaction products in the nickel-catalyzed electrochemical carboxylation of terminal alkynes

The influence of a series of N and P ligands in the nickel-catalyzed electrochemical carboxylation of 1-octyne has been studied. Different carboxylic acids are obtained depending on the nature of the ancillary ligand, and results afford an example of high ligand-directed product specificity.     

Carbon dioxide in 1-butyl-3-methylimidazolium acetate. I. Unusual solubility investigated by Raman spectroscopy and DFT calculations

The unusual solubility of carbon dioxide in 1-butyl-3-methylimidazolium acetate (Bmim Ac) has been studied by Raman spectroscopy and DFT calculations. It is shown that the solubility results from the existence of two distinct solvation regimes. In the first one (CO(2) mole fraction ≤ 0.35), the usual Fermi dyad is not observed, a fact never reported before for binary mixtures with organic liquids or ionic liquids (IL). Strong experimental evidence complemented by effective DFT modeling shows that this regime is dominated by a chemical reaction leading to the carboxylation of the imidazolium ring accompanied by acetic acid formation. The reactive scheme proposed involves two concerted mechanisms, which are a proton exchange process between the imidazolium cation and the acetate anion and the carboxylation process itself initiated from the formation of "transient" CO(2)-1-butyl-3-methylimidazole 2-ylidene carbene species. In that sense, CO(2) triggers the carboxylation reaction. Moreover, this dynamic picture circumvents consideration of a long-lived carbene formation in dense phase. The second regime is characterized by the detection of the CO(2) Fermi dyad showing that the carboxylation reaction has been strongly moderated. This finding has been interpreted as due to the interaction of the acetic acid molecules with the COO group of acetate anions involved in monodentate forms with the cation. The observation of the Fermi doublet allows us to infer that CO(2) essentially preserves its linear geometry and that the nature and strength of the interactions with its environment should be comparable to those existing in organic liquids and other IL as well. These results have been supported by DFT calculations showing that the CO(2) molecule interacts with energetically equivalent coexisting structures and that its geometry departs only slightly from the linearity. Finally, we find that the CO(2) solvation in Bmim Ac and 1-butyl-3-methylimidazolium trifluoroacetate (Bmim TFA) cannot be straightforwardly compared neither in the first regime due to the existence of a chemical reaction nor in the second regime because CO(2) interacts with a variety of environments not only consisting of ions pairs like in Bmim TFA but also with carboxylate and acetic acid molecule.     

Ionic liquid-assisted carboxylation of amines by CO2: a mechanistic consideration

The catalytic roles of ionic liquids (ILs) in the syntheses of 1,3-disubstituted ureas from the carboxylation of amines by CO(2) were experimentally and theoretically investigated. The carboxylation reaction of n-butylamine was greatly facilitated by the presence of an IL and the catalytic activity of the IL was strongly affected by the nucleophilicity of the anion. Computational study on the mechanistic aspects of the carboxylation with methylamine with or without the presence of an IL, 1-ethyl-3-methylimidazolium chloride, implies that the activation energies of the transition states and the intermediate ionic species could be lowered significantly through the multi-interactions of the carbonyl group of CO(2) with both cations and anions of the ILs.     

Copper(I)-catalyzed carboxylation of aryl- and alkenylboronic esters

The copper(I)-catalyzed carboxylation reaction of aryl- and alkenylboronic esters proceeded smoothly under CO(2) to give the corresponding carboxylic acid in good yield. This reaction showed wide generality with higher functional group tolerance compared to the corresponding Rh(I)-catalyzed reaction.     

Palladium catalyzed carboxylation of allylstannanes and boranes using CO2

A family of well-defined (η(3)-allyl)Pd(L)(carboxylate) (L = PR(3) or NHC) complexes are by far the most efficient catalysts reported to date for the catalytic carboxylation of allylstannanes into allylcarboxylates using CO(2). The substrate scope of this reaction is extended to both substituted allylstannanes and allylboranes.     

Nickel-Catalyzed Aminocarbonylation of Aryl Iodides with 1 atm CO

Reported here is a nickel-catalyzed aminocarbonylation of aromatic iodides with (hetero)aryl anilines and alkyl amines under atmospheric CO pressure. The reaction features with broad substrate scope with excellent functional group tolerance, providing an expedient method for the construction of amide analogues. Notably, amino alcohols can be selectively transformed into the corresponding amides successfully without interfering the hydroxyl group under the current standard conditions.     

钴催化的苯直接羰基化反应研究

研究了一种将苯直接羰基化合成苯甲酸的新型催化体系Co(OAc) 2/CCl3COOH/K2S2O8，考察了反应过程中催化剂、反应时间、温度、CO压力等因素 对反应收率的影响，结果表明在优化的反应条件下，苯甲酸收率可达到20％以上。 同时给出了可能的反应机理。     

Carboxylation of arene C-H bonds with CO2: a DFT-based approach to catalyst design

A prototypical catalytic cycle for the direct carboxylation of unactivated arene C-H bonds with CO(2) based on ruthenium(II) pincer complexes as catalysts is proposed and investigated by density functional theory (DFT) methods. The energetic span model is used to predict the turnover frequency (TOF) of various potential catalysts, evaluating their efficiency for this reaction. In addition to modifications of the catalyst structure, we also investigated the effect of the substrate, the solvent, and the influence of a base on the thermodynamics and kinetics of the reaction. Turnover frequencies in the range of 10(5)-10(7) h(-1) are predicted for the best systems. Alternative reaction pathways that might prevent the reaction are also investigated. In all cases, either the respective intermediates are found to be unstable or activation barriers are found to be very high, thereby indicating that these alternative pathways will not interfere with the proposed catalytic cycle. As a result, several ruthenium pincer complexes are suggested as very promising candidates for experimental investigation as catalysts for the carboxylation of arene C-H bonds with CO(2).     

CO(2) fixation by Rubisco: computational dissection of the key steps of carboxylation, hydration, and C-C bond cleavage.

Despite intensive experimental and computational studies, some important features of the mechanism of the photosynthetic CO(2)-fixing enzyme, Rubisco, are still not understood. To complement our previous investigation of the first catalytic step, the enolization of D-ribulose-1,5-bisphosphate (King et al., Biochemistry 1998, 44, 15414-15422), we present the first complete computational dissection of subsequent steps of the carboxylation reaction that includes the roles of the central magnesium ion and modeled residues of the active site. We investigated carboxylation, hydration, and C-C bond cleavage using the density functional method and the B3LYP/6-31G(d) level to perform geometry optimizations. The energies were determined by B3LYP/6-311+G(2d,p) single-point calculations. We modeled a fragment of the active site and substrate, taking into account experimental findings that the residues coordinated to the Mg ion, especially the carbamylated Lys-201, play critical roles in this reaction sequence. The carbamate appears to act as a general base, not only for enolization but also for hydration of the beta ketoacid formed by addition of CO(2) and, as well, cleavage of the C2-C3 bond of the hydrate. We show that CO(2) is added directly, without assistance of a Michaelis complex, and that hydration of the resultant beta ketoacid occurs in a separate subsequent step with a discrete transition state. We suggest that two conformations of the hydrate (gem-diol), with different metal coordination, are possible. The step with the highest activation energy during the carboxylation cycle is the C-C bond cleavage. Depending on the conformations of the gem-diol, different pathways are possible for this step. In either case, special arrangements of the metal coordination result in bond breaking occurring at remarkably low activation energies (between 28 and 37 kcal mol(-1)) which might be reduced further in the enzyme environment.     

How does the nickel pincer complex catalyze the conversion of CO2 to a methanol derivative? A computational mechanistic study

The mechanistic details of nickel-catalyzed reduction of CO(2) with catecholborane (HBcat) have been studied by DFT calculations. The nickel pincer hydride complex ({2,6-C(6)H(3)(OP(t)Bu(2))(2)}NiH = [Ni]H) has been shown to catalyze the sequential reduction from CO(2) to HCOOBcat, then to CH(2)O, and finally to CH(3)OBcat. Each process is accomplished by a two-step sequence at the nickel center: the insertion of a C═O bond into [Ni]H, followed by the reaction of the insertion product with HBcat. Calculations have predicted the difficulties of observing the possible intermediates such as [Ni]OCH(2)OBcat, [Ni]OBcat, and [Ni]OCH(3), based on the low kinetic barriers and favorable thermodynamics for the decomposition of [Ni]OCH(2)OBcat, as well as the reactions of [Ni]OBcat and [Ni]OCH(3) with HBcat. Compared to the uncatalyzed reactions of HBcat with CO(2), HCOOBcat, and CH(2)O, the nickel hydride catalyst accelerates the H(δ-) transfer by lowering the barriers by 30.1, 12.4, and 19.6 kcal/mol, respectively. In general, the catalytic role of the nickel hydride is similar to that of N-heterocyclic carbene (NHC) catalyst in the hydrosilylation of CO(2). However, the H(δ-) transfer mechanisms used by the two catalysts are completely different. The H(δ-) transfer catalyzed by [Ni]H can be described as hydrogen being shuttled from HBcat to nickel center and then to the C═O bond, and the catalyst changes its integrity during catalysis. In contrast, the NHC catalyst simply exerts an electronic influence to activate either the silane or CO(2), and the integrity of the catalyst remains intact throughout the catalytic cycle. The comparison between [Ni]H and Cp(2)Zr(H)Cl in the stoichiometric reduction of CO(2) has suggested that ligand sterics and metal electronic properties play critical roles in controlling the outcome of the reaction. A bridging methylene diolate complex has been previously observed in the zirconium system, whereas the analogous [Ni]OCH(2)O[Ni] is not a viable intermediate, both kinetically and thermodynamically. Replacing HBcat with PhSiH(3) in the nickel-catalyzed reduction of CO(2) results in a high kinetic barrier for the reaction of [Ni]OOCH with PhSiH(3). Switching silanes to HBcat in NHC-catalyzed reduction of CO(2) generates a very stable NHC adduct of HCOOBcat, which makes the release of NHC less favorable.     

溴化锌-卤化正四丁基铵高效催化合成苯乙烯环状碳酸酯

溴化锌-卤化正四丁基铵二元催化剂高效催化合成苯乙烯环状碳酸酯, 当n-Bu4NI/ZnBr2摩尔比为2时, 在短时间内(30 min)可将苯乙烯环氧化物几乎完全转化为环状碳酸酯, 无其它副产物的生成. 在ZnBr2/n-Bu4NX的催化体系中加入Au/SiO2 氧化催化剂时, 能将苯乙烯直接氧化, 然后碳酰化实现“一锅法”制备环状碳酸酯. 在此合成路线中担载的纳米金催化第一步苯乙烯环氧化反应; ZnBr2/n-Bu4NBr催化第二步CO2环加成反应. 在温和的反应条件下(80 ℃, 1 MPa, 4 h)将环状碳酸酯的产率提高到42%.