胶原纤维接枝多酚负载纳米钯的制备及其对硝基苯加氢的催化特性

以胶原纤维(CF)接枝表棓儿茶素棓酸脂(EGCG)为载体,制备了新型非均相钯(Pd)纳米催化剂(CF-EGCG-Pd).EGCG作为"桥分子"不仅对Pd纳米颗粒具有锚定作用,而且能控制Pd纳米颗粒的大小及分布.通过SEM、TEM、XRD、XPS对该催化剂的形貌和物理特性能进行了表征,发现该催化剂具有规整的纤维结构,在胶原纤维的外表面形成了高分散的平均粒径在3.8 nm的Pd纳米颗粒.将该催化剂用于硝基苯液相催化加氢反应,结果表明在308 K和1.0 MPa氢压下,硝基苯转化速率(TOF)达到34.13 mol·mol-1·min-1,苯胺选择性为100%,催化剂重复使用3次其催化活性基本不变.     

多壁碳纳米管负载Pd-Ni电催化剂对乙二醇的电催化氧化

采用微波加热还原法制备了不同化学计量比的Pd-Ni复合多壁碳纳米管(Pd-Ni/MWCNT)催化剂. 通过X射线衍射(XRD)、透射电镜(TEM)和能量散射谱(EDS)等微结构和组成表征表明, 所合成的催化剂中Pd-Ni合金具有较小的纳米颗粒以及较好的分散程度. 循环伏安(CV)、线性扫描(LSV)、计时电流方法(CA)和交流阻抗(EIS)等测试表明, Pd-Ni(3:1)/MWCNT催化剂对乙二醇的电化学氧化具有较高的催化活性.     

单层分散型Pd/Ni双金属催化剂的制备及其催化加氢性能

通过置换反应制备了Pd/Ni双金属催化剂,利用X射线衍射、CO化学吸附和吸附H2的程序升温脱附对其进行了表征,并测定了该催化剂对环己烯、苯乙烯和丙酮气相加氢反应的催化性能.结果发现,在这种催化剂中Pd原子单层分散在金属Ni的表面,因而该催化剂表现出比浸渍法制备的相同Pd含量的Pd/Ni-im和Pd/-γAl2O3催化剂更高的催化加氢活性.     

具有特殊结构和电子性质的PdAu/Al2O3催化剂上蒽醌加氢反应性能

通过改变Pd和Au的负载顺序合成了一系列具有不同结构和电子性质的PdAu双金属催化剂, 并用于蒽醌加氢反应. 其中通过先负载Au后负载Pd的顺序制得的Pd/Au/Al₂O₃催化剂, 其加氢效率可高达14.27 g·L^-1.X射线衍射、透射电子显微镜、H₂程序升温还原和X射线光电子能谱等分析表征结果显示, Pd/Au/Al₂O₃催化剂中分散在Au颗粒表面的Pd纳米颗粒具有独特的爆米花结构, 其表面零价态的单质Pd含量最多, 而这种表面零价态的单质Pd是蒽醌加氢反应中的关键活性组分. 此外, Au的加入可有效抑制副反应的发生, 减少降解产物的生成, 从而大大提高了催化选择性.     

巯基功能化介孔材料高效锚定钯负载型催化剂的制备及其苯酚加氢催化性能

以含巯基官能团有机硅烷修饰的介孔材料MCM-41和SBA-15为载体, 采用浸渍-氢气还原法制备了高分散和高活性的负载型Pd催化剂. X射线衍射、N₂吸附-脱附和透射电子显微镜表征结果显示, 所制Pd催化剂Pd-SH-MCM-41和Pd-SH-SBA-15具有很好的长程有序结构、分布均匀的孔径、高比表面积及高度分散的Pd颗粒. 苯酚加氢反应结果表明, 以Pd-SH-MCM-41和Pd-SH-SBA-15为催化剂时, 在80℃, 1.0MPa反应1h, 苯酚转化率达99%以上, 环己酮选择性为98%. 它们的催化活性为商业Pd/C催化剂的5倍, Pd/MCM-41和Pd/SBA-15催化剂的3倍. 这可归因于介孔材料表面修饰的巯基官能团对Pd的锚定作用, 避免了Pd颗粒的团聚, 使其高度分散在介孔材料上.     

碳纳米管负载Pd/SnO2催化剂的制备及其催化邻氯硝基苯加氢性能

采用化学还原法制备了不同Sn/Pd摩尔比的碳纳米管(CNTs)负载Pd/SnO2催化剂,并将该催化剂用于邻氯硝基苯(o-CNB)的选择加氢反应.采用透射电镜、X射线衍射和电感耦合等离子体技术对所制备的Pd/SnO2/CNTs催化剂进行了表征.结果表明,Sn/Pd摩尔比对该催化剂的邻氯硝基苯选择加氢反应性能影响显著.当Sn/Pd摩尔比为11时,催化剂的活性最高,在常压,60℃反应60 min,o-CNB转化率为96%.该催化剂还具有高的邻氯苯胺(o-CAN)选择性,o-CNB转化率达到100%时,脱氯副产物苯胺选择性小于5%.在相同条件下,浸渍法制备的2.4%Pd/CNTs催化剂上脱氯副反应严重,当o-CNB完全转化时,o-CAN选择性只有22%,副产物苯胺选择性则高达78%.     

Pd-Cu/Fe_3O_4@C催化1,4-丁炔二醇选择性加氢的研究

1,4-丁烯二醇是一种高经济价值的精细化学品,1,4-丁炔二醇选择性加氢是制备1,4-丁烯二醇的有效途径。本文采用浸渍法制备了双金属磁性催化剂Pd-Cu/Fe_3O_4@C,利用X射线衍射(XRD)、X射线光电子能谱(XPS)及透射电子显微镜(TEM)等技术手段对催化剂进行了表征,考察了Pd/Cu物质的量比、反应温度、H2压力、反应时间和催化剂用量等因素对催化剂性能的影响。结果表明,在Pd/Cu物质的量之比1∶1、催化剂/底物为1∶90000、反应温度为50℃、H_2压力为4MPa、时间为25min的条件下,1,4-丁炔二醇选择性加氢的转化率和选择性分别达到了95.2%和98.3%。该催化剂不仅具有高催化活性和选择性,而且易与反应产物实现磁性分离,为该过程的工业化应用奠定了基础。     

金属有机骨架材料MIL-53(Al)负载纳米Pd颗粒：一种CO氧化的活性催化剂

通过等体积浸渍法制备了金属有机骨架材料MIL-53(Al) (MIL：Materials of Institut Lavoisier)负载纳米Pd催化剂. 采用X射线衍射(XRD)、透射电子显微镜(TEM)和X射线光电子能谱(XPS)等手段对催化剂的结构进行了表征. 催化剂在反应前后XRD衍射峰保持不变,说明载体MIL-53(Al)具有良好的稳定性. 采用TEM对催化剂进行表征,结果表明,MIL-53(Al)的多孔晶体结构有助于形成高度分散的纳米Pd颗粒,样品2.7% (w) Pd/MIL-53 中Pd颗粒的平均粒径为2.21 nm. 该催化剂在CO氧化反应中表现出较高的催化活性,115 ℃达到完全转化. 同时催化剂可循环使用,多次反应后催化活性和催化剂结构都保持稳定.     

金属含量对Ni-Pd/H-Y上正癸烷加氢异构化反应活性和产物选择性的影响

在Y分子筛上浸渍0.1 wt% Pd和0.1–0.5 wt% Ni,用X射线衍射表征了该催化剂的结晶度,用透射电镜测得平均金属粒径.催化剂中Pd和Ni的化学态用X射线光电子能谱测定,其酸性则用氨-程序升温脱附进行了表征,发现一些酸位被Ni2+离子交换.采用程序升温还原表征了HY分子筛负载的Pd, Ni和Pd-Ni催化剂的还原性能.正癸烷加氢异构化反应在200–450 oC和1 atm条件下进行.结果发现,当0.1 wt% Pd/HY中Ni添加量增至0.3 wt%时,正癸烷转化率和异构化选择性增加.单支链和双支链异构体选择性的增加表明该反应遵循质子化环丙烷中间体机理. Ni添加量超过阈值导致活性和异构化选择性急剧下降.综上可见,双金属催化剂更有利于选择性生成双支链异构体,其辛烷值更高.     

负载型纳米贵金属催化剂催化吡啶及其衍生物的加氢反应

 制备了负载型高分散的纳米贵金属催化剂和含Ru的双金属催化剂,并考察了催化剂对吡啶及其衍生物加氢反应的催化性能. 结果表明, 5%Ru/C催化剂对吡啶加氢反应的催化活性高于5%Pd/C, 5%Pt/C和5%Ir/C. 在100 ℃, 3.0 MPa, 1 h和Ru/吡啶摩尔比=2.5/1000 的条件下, 5%Ru/C催化吡啶加氢的转化率大于99.9%, 生成哌啶的选择性为100%. 催化剂重复使用5次后,活性和选择性无明显下降. 在Ru催化剂中加入少量的Pd和Ir后催化剂活性没有明显的变化. 采用X射线衍射、高分辨透射电镜和X射线光电子能谱对还原后的5%Ru/C催化剂进行表征,结果表明Ru以高分散金属态存在,其平均粒径小于5 nm. 不同底物的加氢反应活性为: 吡啶≈2-甲基吡啶>2,6-二甲基吡啶>3-甲基吡啶>4-甲基吡啶>3,5-二甲基吡啶>2-甲氧基吡啶.     

碱性介质中多孔纳米结构镍/钯-镍电极上甲醇电氧化反应(英文)

A nanostructured Ni/Pd-Ni catalyst with high activity for methanol oxidation in alkaline solution was prepared by electrodeposition followed by galvanic replacement, that is, electrodeposition of Ni-Zn on a Ni coating with subsequent replacement of the Zn by Pd at the open circuit potential in a Pd-containing alkaline solution. The surface morphology and composition of the coatings were examined by energy dispersive X-ray spectroscopy and scanning electron microscopy. The Ni/Pd-Ni coatings were porous and were composed of discrete Pd nanoparticles of about 58 nm. The electrocatalytic activity of the Ni/Pd-Ni electrodes for the oxidation of methanol was examined by cyclic voltammetry and electrochemical impedance spectroscopy. The onset potentials for methanol oxidation on Ni/Pd-Ni were 0.077 V and 0.884 V, which were lower than those for flat Pd and smooth Ni electrodes, respectively. The anodic peak current densities of these electrodes were 4.33 and 8.34 times higher than those of flat Pd (58.4 mA/cm2 vs 13.47 mA/cm2) and smooth Ni (58.4 mA/cm2 vs 7 mA/cm2). The nanostructured Ni/Pd-Ni electrode is a promising catalyst for methanol oxidation in alkaline media for fuel cell application.     

炭载Pd-Ni合金纳米粒子对甲酸的电催化氧化

通过液相还原法制备了具有不同原子比例的Pd-Ni/C催化剂,并且使用X射线衍射（XRD）、透射电子显微镜(TEM)和X射线光电子能谱(XPS) 等表征手段对制备的催化剂进行了表征,总结了Ni的掺杂对Pd-Ni合金纳米粒子的尺寸及晶体结构的影响。电化学测试结果表明：适量的Ni的掺杂不但能够增强催化剂对甲酸催化氧化的活性,而且还能够提高催化剂的稳定性。因此,Pd-Ni/C催化剂是一类具有潜在应用前景的直接甲酸燃料电池阳极催化剂     

Characterization and reactivity of γ-Al_2O_3 supported Pd–Ni bimetallic nanocatalysts for selective hydrogenation of cyclopentadiene

Several g-Al2O3 supported Pd–Ni bimetallic nanocatalysts(Pd–Ni(x:y)/Al2O3; where x and y represent the mass ratio of Pd and Ni, respectively) were prepared by the impregnation method and used for selective hydrogenation of cyclopentadiene to cyclopentene. The Pd–Ni/Al2O3 samples were confirmed to generate Pd–Ni bimetallic nanoparticles by X-ray diffraction(XRD), X-ray photoelectron spectroscopy(XPS) and transmission electron microscopy(TEM). The catalytic activity was assessed in view of the effects of different mass ratios of Pd and Ni, temperature, pressure, etc. Among all the samples, the Pd–Ni(1:1)/Al2O3(PN-1:1) catalyst showed extremely high catalytic ability. The conversion of cyclopentadiene and selectivity for cyclopentene can be simultaneously more than 90%.     

高效组合型 Pd/C 催化剂用于 Suzuki 偶联反应

 采用有机金属 Pd2(dba)3 (dba 为二亚苄基丙酮) 还原分解法制得均匀分布的 Pd 纳米颗粒 (粒径为 3~6 nm) 混合液, 并用活性炭直接吸附得到了组合型 Pd/C 纳米催化剂. 采用透射电子显微镜、X 射线光电子能谱和 X 射线衍射等手段测定了催化剂表面 Pd 颗粒大小分布、晶型和化学态等. 将该催化剂用于 Suzuki 碳-碳偶联反应, 其催化活性比浸渍法制备的 Pd/C 催化剂高 2 倍以上. 以溴代芳烃为底物时, 在 80 oC 下 0.5 h 后偶联产物收率可达 98% 以上. 以邻氯硝基苯为底物时, 在 110 oC 下 1 h 后偶联产物收率可达 64%; 延长反应时间, 产物收率可达 90% 以上.     

Immobilized Pd nanoparticles on Tris-modified SiO2：Synthesis,characterization, and catalytic activity in Heck cross-coupling reactions

The preparation of supported Pd nanoparticles on Tris (tris(hydroxymethyl)aminomethane)- modified SiO₂ gel and their catalytic application in Heck coupling are investigated. The catalyst was characterized using a combination of X-ray diffraction, transmission electron microscopy, field-emission scanning electron microscopy, and scanning electron microscopy/energy-dispersive X-ray spectroscopy. The supported Pd nanoparticles were found to be a highly active and reusable catalyst for the Heck reaction at a low Pd loading (0.02 mol%) because of stabilization by the Tris moieties. Several reaction parameters, including the type and amount of solvent, base, and temperature, were evaluated. The heterogeneity of the catalytic system was investigated using different approaches, and showed that slight Pd leaching into the reaction solution occurred under the reaction conditions. Despite this metal leaching, the catalyst can be reused seven times without significant loss of its activity.     

Pd/PMO-SBA-15 催化剂催化苯甲醇选择氧化反应性能

 研究了 PMO-SBA-15 材料负载的金属钯纳米粒子 (Pd/PMO-SBA-15) 在水相中催化苯甲醇选择氧化制苯甲醛的反应. 考察了纳米粒子种类、氧化剂用量、反应时间和反应温度等对苯甲醇转化率及苯甲醛选择性的影响. 结果表明, 以水为溶剂, 以 H2O2 (30%) 为氧化剂时, 可得到较高的苯甲醇转化率和苯甲醛选择性. 当以 0.05 g 的 2%Pd/PMO-SBA-15 为催化剂, H2O2 用量为 1.5 ml, 反应温度为 80 oC, 反应 4 h 时, 苯甲醇转化率和苯甲醛选择性分别达到 97.1% 和 100.0%. 对该催化体系的重复使用性能进行了考察. 结果发现, 随着使用次数的增加, 苯甲醇转化率有所下降, 但苯甲醛选择性保持不变.     

中空介孔三氧化钨微球载钯催化剂的甲酸氧化电催化性能

采用喷雾干燥法和焙烧处理制备中空介孔三氧化钨微球(HMTTS),在其表面进一步负载活性成分Pd,得到纳米Pd/HMTTS复合催化剂. 采用X射线粉末衍射(XRD)、扫描电镜(SEM)和透射电镜(TEM)等对催化剂的形貌和晶型结构进行了表征. 结果表明,Pd纳米粒子为面心立方晶体结构,均匀地分布在HMTTS表面. 采用循环伏安和计时电流法研究了在酸性溶液中Pd/HMTTS 催化剂对甲酸的电催化氧化性能,结果表明Pd/HMTTS 催化剂比普通的三氧化钨载钯催化剂(Pd/WO₃)对甲酸呈现出更高的电催化氧化活性和稳定性.HMTTS独特的中空介孔结构和表面特性以及氢溢流效应有利于甲酸在钯表面的直接脱氢氧化过程的发生.     

Structure and deformations of Pd-Ni core-shell nanoparticles

Homogeneous collections of Pd-Ni core-shell nanoparticles have been prepared by decomposition of metal-organic compounds and studied by several electron microscopy techniques: transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), high-resolution transmission electron microscopy (HRTEM), energy-filtered microscopy (EFTEM), and by X-ray photoelectron spectroscopy (XPS). The physical and chemical properties of the Pd shell are supposed to depend on its electronic properties, which are influenced by the presence of the Ni core and by the deformation in the Pd lattice. Here, the interfacial structure of Pd/Ni and the lattice deformations in the core and the shell are studied in detail. The catalytic properties of the pure metal and the bimetallic particles, toward CO oxidation, have been investigated.     

Oxidation of ethanol on carbon-supported oxide-rich Pd–W bimetallic nanoparticles in alkaline media

Carbon-supported oxide-rich Pd–W bimetallic nanoparticles were prepared by chemical reduction methods. The existence of oxides in the electrocatalysts is confirmed by X-ray photoelectron spectrum (XPS) and high resolution transmission electron microscopy. XPS analysis indicates that the oxygen atoms account for about 50% of all the atoms in Pd–W bimetallic nanoparticles. Compared to Pd/C catalyst, the carbon-supported oxide-rich Pd–W bimetallic nanoparticles exhibit a better catalytic activity for the anode oxidation of ethanol in alkaline media. The onset potential of the as prepared oxide-rich Pd_0.8W_0.2/C catalyst (Pd: W = 8: 2, metal atom ratio) for ethanol oxidation is negative shifted about 90 mV comparing to Pd/C catalyst. The oxide-rich Pd–W/C electrocatalysts provide a new model of noble-metal/promoter system as an extreme case of making the promoter (WO₃) closely adjacent to the noble metal (Pd) by fabricating nanoparticles containing both atom-clusters of oxides and the noble metal atoms.