膜电阻对自组装膜修饰电极电化学行为的影响

应用循环伏安和交流阻抗技术研究了 16烷基硫醇自组装膜修饰的金电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的电化学行为 .无“针孔”缺陷的自组装膜对溶液与基底间的界面电子转移具有强烈的阻碍作用 ,当过电位较大时 ,In(I/ η)对 η1/2 之间具有良好的线性关系 .通过对Au/SAM /Hg模拟体系的电流———电压曲线进行测定 ,得到了自组装膜膜电阻的特征 .指出由于膜电阻的存在 ,自组装膜修饰电极在Fe(CN) 63 - /Fe(CN) 64 - 溶液中的行为实质上反映了膜自身的电阻特征     

脱氧核糖核酸在汞膜电极上的电化学行为

首次在汞膜电极上利用循环安，微分脉冲和交流伏安法研究脱氧核糖核酸（ＤＮＡ）的电化学行为，结果表明汞膜电极作为一类固体电极可应用于负电位区ＤＮＡ电化学行为的研究。同时结合凝胶电泳和ＵＶ光谱法，研究了用纯高氯酸处理的ＤＮＡ的氧化还原特性，结果表明纯高氯酸可经起ＤＮＡ的变性和降解，纯高氯酸不适宜ＤＮＡ的变性处理。     

甘草苷在悬汞电极上的电化学行为及方法研究

运用循环伏安法(CV)考察了甘草苷在悬汞电极(HMDE)上的电化学还原行为,在-0.7~-1.7 V(vs.SCE)电位窗口及0.10 mol/L(NH4)2SO4溶液中甘草苷在HMDE上的循环伏安行为是一在低扫描速度(<100 mV/s)下受吸附控制,在高扫描速度下受扩散控制的不可逆还原过程,还原峰电位(Epc)为-1.491 V。运用计时库仑法(CC)、计时电流法(CA)测定并计算了甘草苷的电荷传递系数α、扩散系数D以及表观速率常数Kf等电极过程动力学参数。初步探讨了甘草苷在HMDE上的反应机理,同时运用方波伏安法(SWV)研究了甘草苷在HMDE上的方波伏安行为,还原峰电流与其浓度在1.2×10-6~1.2×10-5mol/L及1.2×10-5~1.2×10-3mol/L范围内呈良好的线性关系,相关系数R=0.9936及0.9966,检出限8.0×10-7mol/L,据此可建立直接电化学测定甘草苷含量的方法。     

L-半胱氨酸自组装膜修饰金电极的电化学特性

采用电化学石英晶体微天平（EQCM）和循环伏安法（CV）研究了L-半胱氨酸在金电极表面形成自组装膜的机理及其电化学性质.结果表明, L-半胱氨酸分子在金电极表面有特性吸附，而且在等电点pH附近因静电引力和氢键作用形成分子对，从而自组装形成双层膜.该膜电极在0.2 mol•L－1的醋酸缓冲溶液中，于－0.2～0.5 V(vs SCE)间CV扫描出现了一对稳定的氧化还原峰，并对抗坏血酸的氧化有良好的催化作用.     

槲皮素在悬汞电极上的伏安行为研究

应用循环扫描伏安法考察槲皮素在悬汞电极上的电化学行为,并用线性扫描伏安法测定其含量。在0.1mol/LNa2CO3-NaHCO3(pH9.51)缓冲溶液中,槲皮素在-1.33V(vs.Ag/AgCl)处出现灵敏的还原峰,峰电流与其浓度在2.0×10-6～2.0×10-5mol/L(r=0.9989)范围内呈良好的线性关系。该方法可直接用于罗布麻叶中槲皮素的含量测定。     

自组装超分子膜修饰电极的研制及分析应用

阐述了自组装超分子膜修饰电极的发展概况及超分子体系形成的理论基础，并对自组装超分子膜修饰电极的特点、电化学行为、功能膜的制备和表征方法以及它在电催化、生物传感器、离子选择性电极等方面的应用进行了综述。     

乙二胺改性的玻璃基片上C60自组装薄膜的制备及光致发光

利用Ｃ６０与乙二胺改性的普通玻璃表面进行加成反应,得到一种新的Ｃ６０自组装单层膜;在自组装单层膜的基础上,利用Ｃ６０与乙二胺反应形成自组装双层膜。通过Ｘ光电子能谱、激光解吸电离飞行时间质说等手段证实在乙二胺改性的普通玻璃表面上存在通过化学键合的Ｃ６０自且装单层和双层膜。并对共光致发光性质进行了初步研究,发现在６８０ｎｍ附近存在一个与Ｃ６０不同的宽的光致发光峰。     

L-半胱氨酸自组装膜修饰金电极对抗坏血酸的电催化作用及其测定

金电极表面对L 半胱氨酸 (L Cys)有特性吸附 ,而L Cys分子在等电点pH附近因静电引力和氢键作用形成分子对 ,从而在电极表面自组装形成L Cys双层膜。L Cys修饰金电极对抗坏血酸 (AA)具有良好的电催化作用。用示差脉冲伏安法对AA进行了测定 ,氧化电流与AA的浓度在 1.0× 10 -3 ～ 4× 10 -6mol/L范围内呈良好的线性关系 ,线性相关系数为 0 .9981;检出限为 4× 10 -7mol/L。用于药片中AA含量的测定 ,结果令人满意。     

Electrochemical Study of the Interaction Mechanism of Proflavine (PF) with DNA Using Carbon Paste (CPE) and Hanging Mercury Drop (HMDE) Electrode

Abstract

Proflavine binds with DNA in a complicated manner. This work involves the electrochemical study of this interaction using differential pulse voltammetry at a carbon paste electrode (CPE) and alternating current voltammetry at a hanging mercury drop electrode (HMDE). At the CPE the peak current intensity at 1.0 V (corresponding to the oxidation of the guanine residues) decreased by increasing the concentration of proflavine. At the HMDE, a decrease in the current intensity of the DNA peak at ? 1.2 V (corresponding to segmental desorption) was also observed by increasing the concentration of proflavine. These results confirmed, electrochemically, that proflavine intercalates within the DNA double helix and changes its conformation.     

Imprinted Polymer – Modified Hanging Mercury Drop Electrode for Differential Pulse Adsorptive Stripping Voltammetric Analysis of a Diquat Herbicide

An imprinted polymer modified hanging mercury drop electrode (HMDE) in Model 303A system in conjunction with a PAR Model 264A Polarographic Analyzer/Stripping Voltammeter has been used for the selective analysis of a diquat herbicide viz., 5,6‐dihydropyrazino[1,2,3,4‐[lmn]‐1,10‐phenanthrolinium dichlorides in differential pulse cathodic stripping voltammetry mode. Complex aqueous samples (drinking water and agricultural soil suspension), spiked with a diquat herbicide, were directly analyzed by the adsorptive accumulation of the analyte over the working electrode (accumulation potential ?0.8 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.0, supporting electrolyte 0.1 M KCl, scan rate 10 mV s^?1, pulse amplitude 25 mV). The limit of detection for diquat herbicide was found to be 0.34 nmol L^?1 (0.1 ppb, RSD 2%, S/N=2).     

Development of Uric Acid Sensor Based on Molecularly Imprinted Polymer‐Modified Hanging Mercury Drop Electrode

Uric acid (UA) sensor based on molecularly imprinted polymer‐modified hanging mercury drop electrode was developed for sensitive and selective analysis in aqueous and blood serum samples. The uric acid‐imprinted polymer was prepared from melamine and chloranil and coated directly onto the surface of a hanging mercury drop electrode, under charge‐transfer interactions at +0.4 V (vs. Ag/AgCl), in model 303A electrode system connected with a polarographic analyzer/stripping voltammeter (PAR model 264A). The binding event of uric acid was detected in the imprinted polymer layer through differential pulse, cathodic stripping voltammetry (DPCSV) at optimized operational conditions [accumulation potential +0.4 V (vs. Ag/AgCl), accumulation time 120 s, pH 7.0, scan rate 10 mV s^?1, pulse amplitude 25 mV]. The limit of detection for UA was found to be 0.024 μg mL^?1 (RSD=0.64%, S/N=3). Under the optimized operational conditions, the sensor was able to differentiate between uric acid and other closely structural‐related compounds and interfering substances. Ascorbic acid (AA), a major interferent in UA estimation, was not adsorbed on the surface of sensor electrode. The present sensor is, therefore, UA‐selective at all concentrations of AA present in human blood serum samples. The précised and accurate quantification of UA have been made in the dilute as well as concentrated regions varying within limits 0.1–4.0 and 9.8–137.0 μg mL^?1, respectively.     

Adsorptive Stripping Voltammetric Determination of Albendazole at a Hanging Mercury Drop Electrode

ABSTRACT

Albendazole is determined by differential-pulse adsorptive cathodic stripping voltammetry at a hanging mercury drop electrode using the reduction peak of its copper(II) complex at ?0.28V at an accumulation potential 0.0V vs. Ag/AgCl electrode. The optimum conditions of pH, accumulation potential and accumulation time were studied. The calibration graph for the determination of albendazole was linear in the range 3.0X10^?8 - 9X10^?7M with a relative standard deviation of 2.8%. The detection limit was 1.0X10^?8M after 180s accumulation at 0.0V. The effect of common excipients and metal ions on the peak height of albendazole was studied. The presence of Cu²⁺ ions forms a stable complex with albendazole which is strongly adsorbed at the mercury electrode surface. The method was applied to the determination of the drug in commercially available dosage forms.     

荧光性自组装双层膜的制备及其性能研究

借助Au-S化学键的作用,在金基底上组装DL-半胱氨酸,利用DL-半胱氨酸与1-萘胺乙酸(NAA)的静电吸引作用在金表面间接组装荧光试剂NAA,从而构建了双层自组装膜NAA/Cys/Au.该自组装膜有较强的荧光信号,能被Cu²⁺猝灭,并具有较好的可逆再生性能,可用于超痕量铜离子的界面荧光测定,对Cu²⁺的检出下限为7.87×10^-11mol/L.同时采用电化学、荧光光谱及电子能谱等方法表征自组装膜的结构,并采用电化学阻抗谱技术和循环伏安法研究自组装膜在K₃[Fe(CN)₆]/K₄[Fe(CN)₆]溶液中的电化学行为研究.结果表明,金表面组装的单层膜具有良好的“针孔”效应,组装上荧光试剂之后形成的无“针孔”缺陷的自组装双层膜对溶液与基底间的界面电子转移有强烈的阻碍作用.     

Stripping Chronopotentiometry and Stripping Voltammetry of Mixtures of Heavy Metal Ions Producing Close Signals: The Cd(II)‐Pb(II)‐Phthalate System

The effects of the proximity of the signals of two heavy metal ions in stripping voltammetry (SV) and constant‐current stripping chronopotentiometry (SCP) is studied at mercury drop (HMDE) and mercury film (MFE) electrodes. For this purpose, the Cd(II)‐Pb(II)‐phthalate system is used, taking advantage of the approaching of the signals corresponding to Cd(II)‐phthalate and Pb(II)‐phthalate labile complexes as phthalate is added to mixtures of Cd(II) and Pb(II)‐ions. The results are compared with those obtained by differential pulse polarography (DPP) and by stripping measurements on the Pb(II)‐phthalate system alone, showing discrepancies in SCP data under nondepletive conditions and negligible differences in the other cases.     

抗癌药物6-巯基嘌呤与DNA相互作用的电化学研究

用循环伏安法、示差脉冲伏安法和紫外光谱法研究了抗癌药物6-巯基嘌呤与DNA的相互作用。在pH 5.6的乙酸缓冲溶液中,两者以静电形式结合形成1:1的缔合物,其缔合物为非电活性化合物,结合常数是5.17×10~6。同时对DNA与6-MP电极过程机理进行了研究,并求得了电极过程动力学参数。     

短杆菌肽在十八烷基硫醇自组装单层膜上的通道行为

短杆菌肽是短杆芽孢菌在芽孢形成过程中合成的一组憎水十五肽,它能在脂双层膜上形成一价阳离子通道,允许一些一价阳离子通过．短杆菌肽离子通道研究在天然双层膜以及人工双层膜,如类脂双层膜（BLM）、脂质体上开展的较多,而基于支撑膜的研究则极少［1-4]．本文在金电极上制备硫醇自组装单层膜,研究了短杆菌肽的离子通道行为,并提出了可能的机理．