Synthesis and characterization of a novel thermosensitive gel with fast response

A gel is a kind of water-swellable but water-insoluble, crosslinked polymer. Some kinds of gels can respond to external temperature changes. This specific property is useful in biomedical and other technological fields. In this paper the synthesis of a novel, thermosensitive gel by the copolymerization of N-isopropylacrylamide or N,N- diethylacrylamide with 3-methacryloxypropyltrimethoxy silane (MPTMS) is reported. The formation of the gel is caused through the interaction of MPTMS under acidic condition. This thermosensitive gel can deswell and reswell quickly in response to the external temperature changes, this behavior probably being due to the heterogeneous structure of the gel produced. This fast-response gel may be useful both in biomedical and biotechnological fields. Received: 17 March 1999 Accepted on revised form: 9 June 1999     

Bacterial nanocellulose containing diethylditiocarbamate bio-curatives: physicochemical characterization and drug delivery evaluation

Bacterial nanocellulose (BNC) is a natural biopolymer produced by different strains of acetic acid bacteria. Biocompatibility, lack of immunogenicity, mechanical strength and crystallinity make BNC a highly applicable product for drug delivery and wound dressing. Previously, we demonstrated that diethylditiocarbamate (DETC), a Superoxide Dismutase 1 inhibitor, incorporated into BNC bio-curatives was effective for treating Cutaneous leishmaniasis (CL) lesions, a parasitic disease caused by Leishmania. We herein investigated the interactions between DETC and BNC. For this purpose, DETC was incorporated into BNC and thermal analysis, x-ray diffraction and Scanning electron microscopy were performed. Furthermore, in vitro DETC release and stability tests as well as degradation studies were also performed. Our results show that DETC is well incorporated into BNC, however it is short lived as suggested by degradation experiments. Future use of BNC DETC-based bio-curatives for the treatment of CL shall require further development in order to increase stability of DETC in the bio-curative.

     

Synthesis and physicochemical characterization of amphiphilic triblock copolymer brush containing pH-sensitive linkage for oral drug delivery

A novel and well-defined pH-sensitive amphiphilic triblock copolymer brush poly(lactide)-b-poly(methacrylic acid)-b-poly(poly(ethylene glycol) methyl ether monomethacrylate) (PLA-b-PMAA-b-PPEGMA) and its self-assembled micelles were developed for oral administration of hydrophobic drugs. The copolymer and its precursors were synthesized by the combination of activators regenerated by electron transfer atom transfer radical polymerization (ARGET ATRP) and ring-opening polymerization (ROP) techniques. The molecular structures and characteristics were confirmed by GPC, (1)H NMR, and FT-IR. The critical micelle concentration (CMC) values of PLA-b-PMAA-b-PPEGMA in aqueous medium varied from 1.4 to 2.6 mg/L, and the partition equilibrium constant (K(v)) of pyrene in micellar solutions ranged from 2.873 × 10(5) to 3.312 × 10(5). The average sizes of the self-assembled blank and drug-loaded micelles were 140-250 nm determined by DLS in aqueous solution. The morphology of the micelles was found to be spherical by SEM. Nifedipine (NFD), a poorly water-soluble drug, was selected as the model drug and wrapped into the core of micelles via dialysis method. The in vitro release behavior of NFD from the micelles was pH-dependent. In simulated gastric fluid (SGF, pH 1.2), the cumulative release percent of NFD was relative low, while in simulated intestinal fluid (SIF, pH 7.4), more than 96% was released within 24 h. All the results showed that the pH-sensitive PLA-b-PMAA-b-PPEGMA micelle may be a prospective candidate as oral drug delivery carrier for hydrophobic drugs with controlled release behavior.     

Preparation and characterization of silicate gel glasses containing Cr2O3

The effect of thermal treatment on the structural incorporation of Cr₂O₃ in xCr₂O₃·(100 – x)SiO₂ and 5R _n O·xCr₂O₃·(95 – x)SiO₂ (where x=0.01–1 mol.% and R=Li, Na and Ca) gel glasses was studied by optical absorption spectrophotometry, DTA-TG, XRD and electron microscopy.Samples heat treated at 60°C have green color due to the presence of Cr³⁺ in octahedral coordination. The optical transmission, and color (yellow, orange or ambar), of the samples heat treated between 200 and 700°C prove that Cr³⁺ (octahedrally coordinated) and Cr⁶⁺ (tetrahedrally coordinated) are both present. Segregation of Cr₂O₃ take place at temperatures above 800°C.In reducing conditions the gel glasses were green due to the presence of a high content of Cr³⁺ ions. Samples containing Li or Na show crystalline phases at temperatures below 850°C.     

Preparation,physicochemical characterization and biological activity evaluation of some inclusion complexes containing artesunate

Journal of Thermal Analysis and Calorimetry - The use of cyclodextrins as carrier molecules is currently highly researched since they can improve not only the apparent water solubility and...     

Separation and purification of puerarin using beta-cyclodextrin-coupled agarose gel media

The isoflavonoid puerarin, a well-known traditional Chinese drug, has been purified in one step from an extract of Radix puerariae (root of the plant Pueralria lobata) by adsorption chromatography on an epichlorohydrin polymerized beta-cyclodextrin ligand coupled to brominated allyl-group substituted Sepharose HP. Acetic acid (10%) was used as the mobile phase and the optimum loading capacity was around 1.2 mg crude extract/ml packed gel. The purity of the collected puerarin was about 98% with a recovery of about 62%.     

Synthesis and characterization of variable-architecture thermosensitive polymers for complexation with DNA

Copolymers of N-isopropylacrylamide with a fluorescent probe monomer were grafted to branched poly(ethyleneimine) to generate polycations that exhibited lower critical solution temperature (LCST) behavior. The structures of these polymers were confirmed by spectroscopy, and their phase transitions before and after complexation with DNA were followed using ultraviolet and fluorescence spectroscopy and light scattering. Interactions with DNA were investigated by ethidium bromide displacement assays, while temperature-induced changes in structure of both polymers and polymer-DNA complexes were evaluated by fluorescence spectroscopy, dynamic light scattering, laser Doppler anemometry, and atomic force microscopy (AFM) in water and buffer solutions. The results showed that changes in polymer architecture were mirrored by variations in the architectures of the complexes and that the overall effect of the temperature-mediated changes was dependent on the graft polymer architecture and content, as well as the solvent medium, concentrations, and stoichiometries of the complexes. Furthermore, AFM indicated subtle changes in polymer-DNA complexes at the microstructural level that could not be detected by light scattering techniques. Uniquely, variable-temperature aqueous-phase AFM was able to show that changes in the structures of these complexes were not uniform across a population of polymer-DNA condensates, with isolated complexes compacting above LCST even though the sample as a whole showed a tendency for aggregation of complexes above LCST over time. These results indicate that sample heterogeneities can be accentuated in responsive polymer--DNA complexes through LCST-mediated changes--a factor that is likely to be important in cellular uptake and nucleic acid transport.     

Synthesis and characterization of thermosensitive copolymers for oral controlled drug delivery

Poly(N-isopropylacrylamide) (PNIPAAm) copolymers were synthesized in order to obtain co-polymers with a phase transition temperature slightly higher than the physiological temperature, as required by a new drug delivery concept described in a previous paper. Six hydrophilic comonomers bringing about a rise of the phase transition temperature were evaluated. The synthesized copolymers were characterized and the influence of the type and of the amount of the used comonomer on the phase transition temperature was discussed. Among the comonomers, Acrylamide (AAm), N-methyl-N-vinylacetamide (MVA), N-vinylacetamide (NVA), and N-vinyl-2-pyrrolidinone (VPL) were found to be capable to raise the phase transition temperature to a value slightly higher than 37 °C and to have adequate phase transition behavior. The selected four copolymers were subjected to an additional purification step that should make them fit to use as a controlling agent in drug delivery systems.     

Physicochemical characterization of degradable thermosensitive polymeric micelles

Amphiphilic AB block copolymers consisting of thermosensitive poly(N-(2-hydroxypropyl) methacrylamide lactate) and poly(ethylene glycol), pHPMAmDL-b-PEG, were synthesized via a macroinitiator route. Dynamic light scattering measurements showed that these block copolymers form polymeric micelles in water with a size of around 50 nm by heating of an aqueous polymer solution from below to above the critical micelle temperature (cmt). The critical micelle concentration as well as the cmt decreased with increasing pHPMAmDL block lengths, which can be attributed to the greater hydrophobicity of the thermosensitive block with increasing molecular weight. Cryogenic transmission electron microscopy analysis revealed that the micelles have a spherical shape with a narrow size distribution. 1H NMR measurements in D2O showed that the intensity of the peaks of the protons from the pHPMAmDL block significantly decreased above the cmt, indicating that the thermosensitive blocks indeed form the solidlike core of the micelles. Static light scattering measurements demonstrated that pHPMAmDL-b-PEG micelles with relatively large pHPMAmDL blocks possess a highly packed core that is stabilized by a dense layer of swollen PEG chains. FT-IR analysis indicated that dehydration of amide bonds in the pHPMAmDL block occurs when the polymer dissolved in water is heated from below to above its cmt. The micelles were stable when an aqueous solution of micelles was incubated at 37 degrees C and at pH 5.0, where the hydrolysis rate of lactate side groups is minimized. On the other hand, at pH 9.0, where hydrolysis of the lactic acid side groups occurs, the micelles started to swell after 1.5 h of incubation and complete dissolution of micelles was observed after 4 h as a result of hydrophilization of the thermosensitive block. Fluorescence spectroscopy measurements with pyrene loaded in the hydrophobic core of the micelles showed that when these micelles were incubated at pH 8.6 and at 37 degrees C the microenvironment of pyrene became increasingly hydrated in time during this swelling phase. The results demonstrate the potential applicability of pHPMAmDL-b-PEG block copolymer micelles for the controlled delivery of hydrophobic drugs.     

Preparation and characterization of carbosilane dendrimer-bonded silica gel and its use in LC

Divergently synthesized carbosilane dendrimers generations 1(G1) and 2 (G2) with allyl end groups were bonded onto silica gel. Reactions between the dendrimers and acid-processed silica gel took place, with toluene reflux and organic base as catalyst. Chemically bonded silica gel was characterized by transmission electron microscopy (TEM), infrared (IR), and other methods. The chemically modified silica gels were packed into high-pressure liquid chromatography (HPLC) column and their separation characters were evaluated. G2-bonded silica gel was effective in separating homologous compounds of alcohol, alkyl-substituted benzene, N-substituted benzene, metacrylic acid ester and phthalate. __________ Translated from Journal of Shandong University, 2005, 40(6) (in Chinese)     

Biodegradable and thermosensitive micelles of amphiphilic polyaspartamide derivatives containing aromatic groups for drug delivery

The preparation, characterization, release, and in vitro cytotoxicity of a biodegradable polymeric micellar formulation of paclictaxel (PTX) were investigated. The micelles based on thermosensitive and degradable amphiphilic polyaspartamide derivatives containing pendant aromatic structures (phe‐g‐PHPA‐g‐mPEG) were prepared by a quick heating method without using toxic organic solvent. Dynamic light‐scattering results show that the micelles are stable upon dilution under physiological conditions and the destabilization of the micelles is pH‐dependent and the phe‐g‐PHPA‐g‐mPEG polymers are biodegradable. PTX was loaded into the phe‐g‐PHPAs‐g‐mPEG micelles with encapsulation efficiency of >90%, resulting in a high drug loading content (up to 29%). PTX‐loaded micelles had a mean size around 70 nm with narrow size distribution (polydispersity index, <0.1). The PTX‐loaded micelles showed sustained drug release and obvious anticancer activity similar to Taxol against HepG2 cells, whereas blank micelles were nontoxic. The present results suggest that the thermosensitive and biodegradable phe‐g‐PHPA‐g‐mPEG micelles are a promising delivery system for the hydrophobic drugs. © 2013 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2013 , 51, 3917–3924     

Drying dissipative structures of thermosensitive gel spheres of poly (N-isopropylacrylamide). Influence of gel size

Drying dissipative patterns of de-ionized suspensions (colloidal crystal-state at high concentrations) of the thermosensitive gels of poly (N-isopropylacrylamide) with various sizes (ca. 400–1,500?nm in diameter at 20?°C) were observed at 20 and 45?°C on a cover glass, a watch glass, and a Petri glass dish. The broad rings were observed and their size decreased as gel concentration decreased. Formation of the monodispersed agglomerated particles and their ordered arrays were observed irrespective of gel size. The macroscopic flickering spoke-like patterns were observed for the gel spheres from 70 to 600?nm in diameter at 20?°C, but almost disappeared for extremely large spheres, poly(N-isopropylacrylamide)(1500-5). This work clarified the formation of the drying microscopic structures of (a) ordered rings, (b) flickering ordered spoke lines, (c) net structure, and (d) lattice-like ordered structures of the agglomerated particles. The ordered rings became rather vague as gel size increased. The large net structures formed so often for large gels. Size effect on the lattice patterns was not recognized so clearly. The role of the electrical double layers around the agglomerated particles and the interaction of the particles with the substrate surfaces during dryness are important for the ordering. The microscopic drying patterns of gel spheres were quite different from those of linear type polymers and also from typical colloidal hard spheres, though the macroscopic patterns such as broad ring formation at the edges of the dried film were similar to each other.     

Synthesis and characterization of a novel solvent-free dextran-HEMA-PNIPAM thermosensitive nanogel

In recent years, the polymeric nanogels, as a group of nanostructured materials, have attracted the attention of researchers of various fields such as polymers, materials science, pharmacy, and drug delivery. Gels are mostly known for their water-swellable features and are candidates for a variety of applications. In this work, a facile solvent free synthesis procedure for production of dextran-hydroxyethyl methacrylate (Dex-HEMA) and poly N-isopropyl acryl amide (PNIPAM) copolymeric nanogels is narrated. The polymerization process was conducted by the UV irradiation and the gel size was controlled by the liposomal structures. The H-NMR and FTIR analysis were all proved a successful polymerization procedure. By implication of the dynamic light scattering (DLS), the mean diameter of particles was determined to be in the range of ca. 350 nm. The molecular weight determination by the GPC results in the Mw ranging from 16100 to 20900 gr mol^?1 with a polydispersity index of ca. 1.5. The turbidity assay indicated the thermosensitive nature of the gels and a LCST of ca. 32.5 was characterized. In this work, the equilibrium swelling measurements and the water content studies at two temperatures of 25 and 37°C were also performed.     

Studies on preparation and absolute bioavailability of a self-emulsifying system containing puerarin

The purpose of the study was to develop an optimum formulation of self-emulsifying drug delivery systems (SEDDS) containing puerarin and to evaluate its absolute bioavailability. Using oleic acid as oil, Tween-80 as surfactant and propylene glycol as cosurfactant, a series of mixtures comprising oleic acid, propylene glycol and Tween 80 were prepared and their self-emulsifying properties were studied. Pseudo-ternary phase diagrams were constructed to identify the efficient self-emulsification region and particle sizes of the resultant emulsions were determined using a laser diffraction sizer. From these studies, an optimized formulation consisting of oil (17.5%), Tween-80 (34.5%) and cosurfactant (34.5%) was selected and its absolute bioavailability in beagle dogs after oral administration was about 24.8%. The data suggest the use of SEDDS to provide a potential way of puerarin administered orally.     

Hydroxyapatite-brushite mixtures: Synthesis and physicochemical characterization

Feasibility was studied whether mixtures containing up to 90 wt % type B hydroxyapatite (Ca/P ≈ 1.50) together with brushite could be synthesized by precipitation from the Ca(NO₃)₂-(NH₄)₂HPO₄-NH₄OH-H₂O system. The synthetic materials were characterized by a set of physicochemical methods. Their behavior was studied during heat treatment and dissolution in isotonic 0.9% NaCl solution.     

Synthesis and physicochemical characterization of carboxymethylcellulose-containing calcium hydroxylapatite

The CaCl₂-(NH₄)₂HPO₄-C₈H₁₁O₇Na-NH₃-H₂O system was studied at 25°C using the solubility method (Tananaev’s residual concentration method) and pH measurements. The solid phases isolated from the system were characterized using chemical analysis, X-ray powder diffraction, IR spectroscopy, and thermogravimetry. Nanocrystalline carboxymethylcellulose-containing calcium hydroxylapatites Ca₁₀(PO₄)₆(OH)₂ · xH₂O · yC₈H₁₁O₇Na with x = 6–12 and y = 0.1–0.5 were found as a result of the characterization.