Influence of perfluorinated compounds on the properties of model lipid membranes

The influence of selected perfluorinated compounds (PFCs), perfluorooctanoic acid (PFOA) or perfluorooctanesulfonic acid (PFOS), on the structure and organization of lipid membranes was investigated using model membranes-lipid monolayers and bilayers. The simplest model--a lipid monolayer--was studied at the air-water interface using the Langmuir-Blodgett technique with surface pressure and surface potential measurements. Lipid bilayers were characterized by NMR techniques and molecular dynamics simulations. Two phospholipids, 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC), characterized by different surface properties have been chosen as components of the model membranes. For a DPPC monolayer, a phase transition from the liquid-expanded state to the liquid-condensed state can be observed upon compression at room temperature, while a DMPC monolayer under the same conditions remains in the liquid-expanded state. For each of the two lipids, the presence of both PFOA and PFOS leads to the formation of a more fluidic layer at the air-water interface. Pulsed field gradient NMR measurements of the lateral diffusion coefficient (DL) of DMPC and PFOA in oriented bilayers reveal that, upon addition of PFOA to DMPC bilayers, DL of DMPC decreases for small amounts of PFOA, while larger additions produce an increased DL. The DL values of PFOA were found to be slightly larger than those for DMPC, probably as a consequence of the water solubility of PFOA. Furthermore, 31P and 2H NMR showed that the gel-liquid crystalline phase transition temperature decreased by the addition of PFOA for concentrations of 5 mol % and above, indicating a destabilizing effect of PFOA on the membranes. Deuterium order parameters of deuterated DMPC were found to increase slightly upon increasing the PFOA concentration. The monolayer experiments reveal that PFOS also penetrates slowly into already preformed lipid layers, leading to a change of their properties with time. These experimental observations are in qualitative agreement with the computational results obtained from the molecular dynamics simulations showing a slow migration of PFCs from the surrounding water phase into DPPC and DMPC bilayers.     

Evidence for the hydration effect at the semiconductor phospholipid-bilayer interface by TiO2 photocatalysis

The interactions of TiO2 with phospholipid bilayers found in cell membrane walls were observed to perturb the bilayer structure under UVA light irradiation. The structure changes in the phospholipid bilayers upon contact with TiO2 under light and in the dark were followed by X-ray diffraction. Hydration effects at the semiconductor-phospholipid interface played an important role in the degradation of dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidylethanolamine (DMPE) bilayers taken as cell wall lipid bilayer models. Evidence is provided that the fluidity of the phospholipid bilayers plays a significant role when interacting in the dark with the TiO2 or in processes mediated by TiO2 under light irradiation.     

Effects of lysophospholipids on membrane order of phosphatidylcholine

Lysophospholipids are known to play a role in a wide range of cellular processes involving membrane–protein or membrane–membrane interactions; however lysolipids–lamellar lipids interactions remain unclear. The effects of lysolipids on membrane order and dynamics were examined using optical birefringence and fluorescence techniques. We found that lysophosphatidic acid (LPA) induces a considerable disorder in chain orientation for synthetic lipid of dimyristoyl-phosphatidylcholines (DMPC), whereas a slight order for natural lipid of egg yolk phosphatidylcholine (Egg-PC), e.g. the chain order decreases by 10% at 0.1 mole ratio for DMPC in comparison with the membranes without LPA and increases by 3.4% at 0.09 mole ratio for Egg-PC. Also, membrane fluidity corresponds with the change in the chain disorder, namely, the fluidity increases for DMPC membranes, while decreases for Egg-PC membranes by addition of LPA. The difference in the effects of LPA is interpreted by a difference in the chain packing between the synthetic and the natural lipid bilayers. LPA can be incorporated into natural lipid membranes without disturbance, and readjusts itself to a more favorable hydrophobic match with the bilayers. Lysophophatidylcholine (LPC) also induces a disorder in DMPC membranes, but the decrease in chain order is only half compared with that for LPA.     

A mechanistic study of the permeation kinetics through biomembrane models: gemcitabine-phospholipid bilayer interaction

The kinetics of the interaction between Gemcitabine (a new anticancer drug) and phospholipid membrane models was investigated. This kind of study is of particular importance both in hypothesizing the interaction of Gemcitabine with mammalian cell membranes and in evaluating the potentiality of liposomes as a Gemcitabine delivery system. Unilamellar (LUV) and multilamellar (MLV) membrane models were made up of dimyristoylphosphatidylcholine (DMPC), dimyristoylphosphatidic acid sodium salt (DMPA), or a DMPC-DMPA mixture (1:1 molar ratio). Gemcitabine-phospholipid vesicle interaction was studied by differential scanning calorimetry (DSC) measurements performed at different time intervals. The findings showed slower permeation kinetics of Gemcitabine through MLV than LUV which, at the same lipid/water ratio, are characterized by a larger lipid surface in contact with the drug aqueous solution. Another interesting difference between LUV and MLV is the onset of a transient two-peak structure during the DSC scans of MLVs. The effect is due to the unequal distribution of the drug between the outer and inner bilayers of the multilamellar vesicles during the permeation kinetics. At equilibrium the two-peak structure merges into a unique peak. This finding may provide useful information about the lipid bilayer permeability in model membranes.     

Losartan's affinity to fluid bilayers modulates lipid-cholesterol interactions

Losartan is an angiotensin II receptor antagonist mainly used for the regulation of high blood pressure. Since it was anticipated that losartan reaches the receptor site via membrane diffusion, the impact of losartan on model membranes has been investigated by small angle X-ray scattering. For this purpose 2-20 mol% losartan was incorporated into dimyristoyl-phosphatidylcholine (DMPC) and palmitoyl-oleoyl-phosphatidylcholine (POPC) bilayers and into their binary mixtures with cholesterol in the concentration range of 0 to 40 mol%. Effects of losartan on single component bilayers are alike. Partitioning of losartan into the membranes confers a negative charge to the lipid bilayers that causes the formation of unilamellar vesicles and a reduction of the bilayer thickness by 3-4%. Analysis of the structural data resulted in an estimate for the partial area of losartan, A(Los) ≈ 40 ?(2). In the presence of cholesterol, differences between the effects of losartan on POPC and DMPC are striking. Membrane condensation by cholesterol is retarded by losartan in POPC. This contrasts with DMPC, where an increase of the cholesterol content shifts the partitioning equilibrium of losartan towards the aqueous phase, such that losartan gets depleted from the bilayers from 20 mol% cholesterol onwards. This indicates (i) a chain-saturation dependent competition of losartan with lipid-cholesterol interactions, and (ii) the insolubility of losartan in the liquid ordered phase of PCs. Consequently, losartan's action is more likely to take place in fluid plasma membrane patches rather than in domains rich in cholesterol and saturated lipid species such as in membrane rafts.     

Effects of lipid chain length on molecular interactions between paclitaxel and phospholipid within model biomembranes

Molecular interactions between an anticancer drug, paclitaxel, and phosphatidylcholine (PC) of various chain lengths were investigated in the present work by the Langmuir film balance technique and differential scanning calorimetry (DSC). Both the lipid monolayer at the air-water interface and lipid bilayer vesicles (liposomes) were employed as model biological cell membranes. Measurement and analysis of the surface pressure versus molecular area curves of the mixed monolayers of phospholipids and paclitaxel under various molar ratio showed that phospholipids and paclitaxel formed a nonideal miscible system at the interface. Paclitaxel exerted an area-condensing effect on the lipid monolayer at small molecular surface areas and an area-expanding effect at large molecular areas, which could be explained by the intermolecular forces and geometric accommodation between the two components. Paclitaxel and phospholipids could form thermodynamically stable monolayer systems: the stability increased with the chain length in the order DMPC (C14:0)>DPPC (C16:0)>DSPC (C18:0). Investigation of paclitaxel penetration into the pure lipid monolayer showed that DMPC had a higher ability to incorporate paclitaxel and the critical surface pressure for paclitaxel penetration also increased with the chain length in the order DMPC>DPPC>DSPC. A similar trend was testified by DSC studies on vesicles of the mixed paclitaxel/phospholipids bilayer. Paclitaxel showed the greatest interaction with DMPC while little interaction could be measured in the paclitaxel/DSPC liposomes. Paclitaxel caused broadening of the main phase transition without significant change at the peak melting temperature of the phospholipid bilayers, which demonstrated that paclitaxel was localized in the outer hydrophobic cooperative zone of the bilayer. The interaction between paclitaxel and phospholipid was nonspecific and the dominant factor in this interaction was the van der Waals force or hydrophobic force. As the result of the lower net van der Waals interaction between hydrocarbon chains for the shorter acyl chains, paclitaxel interacted more readily with phospholipids of shorter chain length, which also increased the bilayer intermolecular spacing.     

Impact of Strong and Weak Lipid–Protein Interactions on the Structure of a Lipid Bilayer on a Gold Electrode Surface

A lipid bilayer deposited on an electrode surface can serve as a benchmark system to investigate lipid–protein interactions in the presence of physiological electric fields. Recoverin and myelin‐associated glycoprotein (MAG) are used to study the impact of strong and weak protein–lipid interactions on the structure of model lipid bilayers, respectively. The structural changes in lipid bilayers are followed using electrochemical polarization modulation infrared reflection–absorption spectroscopy (PM IRRAS). Recoverin contains a myristoyl group that anchors in the hydrophobic part of a cell membrane. Insertion of the protein into the 1,2‐dimyristoyl‐sn‐glycero‐3‐phosphatidylcholine (DMPC)–cholesterol lipid bilayer leads to an increase in the capacitance of the lipid film adsorbed on a gold electrode surface. The stability and kinetics of the electric‐field‐driven adsorption–desorption process are not affected by the interaction with protein. Upon interaction with recoverin, the hydrophobic hydrocarbon chains become less ordered. The polar head groups are separated from each other, which allows for recoverin association in the membrane. MAG is known to interact with glycolipids present on the surface of a cell membrane. Upon probing the interaction of the DMPC–cholesterol–glycolipid bilayer with MAG a slight decrease in the capacity of the adsorbed lipid film is observed. The stability of the lipid bilayer increases towards negative potentials. At the molecular scale this interaction results in minor changes in the structure of the lipid bilayer. MAG causes small ordering in the hydrocarbon chains region and an increase in the hydration of the polar head groups. Combining an electrochemical approach with a structure‐sensitive technique, such as PM IRRAS, is a powerful tool to follow small but significant changes in the structure of a supramolecular assembly.     

Study of frictional properties of a phospholipid bilayer in a liquid environment with lateral force microscopy as a function of NaCl concentration

Friction properties of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC)-supported planar bilayers deposited on mica were tested in a liquid environment by lateral force microscopy. The presence of these bilayers was detected by imaging and force measurements with atomic force microscopy. To test how the presence of NaCl affects the frictional properties of the phospholipid bilayers, four DMPC bilayers were prepared on mica in saline media ranging from 0 to 0.1 M NaCl. Changes in the lateral vs vertical force curves were recorded as a function of NaCl concentration and related to structural changes induced in the DMPC bilayer by electrolyte ions. Three friction regimes were observed as the vertical force exerted by the tip on the bilayer increased. To relate the friction response to the structure of the DMPC bilayer, topographic images were recorded at the same time as friction data. Ions in solution screened charges present in DMPC polar heads, leading to more compact bilayers. As a consequence, the vertical force at which the bilayer broke during friction experiments increased with NaCl concentration. In addition, the topographic images showed that low-NaCl-concentration bilayers recover more easily due to the low cohesion between phospholipid molecules.     

The cell-penetrating peptide TAT(48-60) induces a non-lamellar phase in DMPC membranes.

Cell-penetrating peptides (CPPs) are short polycationic sequences that can translocate into cells without disintegrating the plasma membrane. CPPs are useful tools for delivering cargo, but their molecular mechanism of crossing the lipid bilayer remains unclear. Here we study the interaction of the HIV-derived CPP TAT (48-60) with model membranes by solid-state NMR spectroscopy and electron microscopy. The peptide induces a pronounced isotropic (31)P NMR signal in zwitterionic DMPC, but not in anionic DMPG bilayers. Octaarginine and to a lesser extent octalysine have the same effect, in contrast to other cationic amphiphilic membrane-active peptides. The observed non-lamellar lipid morphology is attributed to specific interactions of polycationic peptides with phosphocholine head groups, rather than to electrostatic interactions. Freeze-fracture electron microscopy indicates that TAT(48-60) induces the formation of rodlike, presumably inverted micelles in DMPC, which may represent intermediates during the translocation across eukaryotic membranes.     

Phospholipids Bilayers as Molecular Models for Drug- Membrane Interactions. The Case of the Antiepileptics Phenytoin and Carbamazepine

With the aim to better understand the molecular mechanisms of the interaction of phenytoin and carbamazepine with cell membranes we utilized a well-established model consisting in intact human erythrocytes, isolated unsealed human erythrocyte membranes (IUM) and molecular models of its membrane. The latter consisted of bilayers of dimyristoylphosphatidylcholine (DMPC) and dimyristoylphosphatidyl-ethanolamine (DMPE), representative of phospholipid classes respectively located in the outer and inner monolayers of erythrocytes and other cell membranes. This report presents the following evidence that phenytoin and carbamazepine interact with membrane phospholipids: a) X-ray diffraction and fluorescence spectroscopy showed that both drugs preferentially interacted with DMPC; b) in IUM, the drugs induced a disordering effect on the polar head groups and acyl chains of the eryhrocyte membrane lipid bilayers; c) electron microscopy observations of human erythrocytes showed the echinocyte formation, an effect due to phenytoin and carbamazepine insertion in the outer monolayer of the red cell membrane.     

Computational analysis of local membrane properties

In the field of biomolecular simulations, dynamics of phospholipid membranes is of special interest. A number of proteins, including channels, transporters, receptors and short peptides are embedded in lipid bilayers and tightly interact with phospholipids. While the experimental measurements report on the spatial and/or temporal average membrane properties, simulation results are not restricted to the average properties. In the current study, we present a collection of methods for an efficient local membrane property calculation, comprising bilayer thickness, area per lipid, deuterium order parameters, Gaussian and mean curvature. The local membrane property calculation allows for a direct mapping of the membrane features, which subsequently can be used for further analysis and visualization of the processes of interest. The main features of the described methods are highlighted in a number of membrane systems, namely: a pure dimyristoyl-phosphatidyl-choline (DMPC) bilayer, a fusion peptide interacting with a membrane, voltage-dependent anion channel protein embedded in a DMPC bilayer, cholesterol enriched bilayer and a coarse grained simulation of a curved palmitoyl-oleoyl-phosphatidyl-choline lipid membrane. The local membrane property analysis proves to provide an intuitive and detailed view on the observables that are otherwise interpreted as averaged bilayer properties.     

Homogeneity, electrical resistivity and lateral diffusion of lipid bilayers coupled to polyelectrolyte multilayers

The electrostatic coupling of charged phospholipid bilayers with polyelectrolyte multilayers is studied varying the lipid charge density, multilayer composition and preparation conditions. It is shown that in all cases the bilayer is insufficiently insulating for meaningful electrochemical studies. Homogeneity on a light microscopical length scale was obtained by two methods: vesicle fusion into bilayers and deposition from monolayers by the Langmuir–Schäfer (LB/LS) technique. Largest progress was achieved aiming for lateral diffusion comparable to an uncoupled bilayer. For this mixtures with 10% charged (DOPA) and 90% uncharged (DMPC) lipid were prepared that exhibited sufficient anchoring density and at the same time a fluid DMPC phase on going above the main phase transition at 24°C. This yielded diffusion coefficients in aqueous environment above 1 μm² s⁻¹ with almost no immobile fractions.     

Molecular dynamics simulations of rhodopsin in different one-component lipid bilayers

Four 20 ns molecular dynamic simulations of rhodopsin embedded in different one-component lipid bilayers have been carried out to ascertain the importance of membrane lipids on the protein structure. Specifically, dimyristoyl phosphatidylcholine (DMPC), dipalmitoyl phosphatidylcholine (DPPC), palmitoyl oleoyl phosphatidylcholine (POPC), and palmitoyl linoleyl phosphatidylcholine (PLPC) lipid bilayers have been considered for the present work. The results reported here provide information on the hydrophobic matching between the protein and the bilayer and about the differential effects of the protein on the thickness of the different membranes. Furthermore, a careful analysis of the individual protein-lipid interactions permits the identification of residues that exhibit permanent interactions with atoms of the lipid environment that may putatively act as hooks of the protein to the membrane. The analysis of the trajectories also provides information about the effect of the bilayer on the protein structure, including secondary structural elements, salt bridges, and rigid-body motions.     

Chain-melting phase transition and short-range molecular interactions in phospholipid foam bilayers

Occurrence of two-dimensional chain melting phase transition in foam bilayers was established for the first time. Microscopic horizontal foam bilayers [Newton black films (NBF)] were investigated by the microinterferometric method of Scheludko-Exerowa. The foam bilayers were formed from water-ethanol solutions of dimyristoylphosphatidylcholine (DMPC) and dipalmitoylphosphatidylcholine (DPPC) and egg phosphatidylcholine (Egg PC) and samples of amniotic fluid (AF) at different temperatures. The influence of temperature on the foam bilayer thickness h(w) and on the critical concentration Cc for formation of foam bilayer was studied. It was shown that in the range of the main phase transition the temperature dependence of h(w) and C(c) changed specifically in the case of DMPC and DPPC foam bilayers. The thickness of the foam bilayers increased with decreasing temperature in the range of the main phase transition due to the melting of hydrocarbon tails of phospholipid molecules. These changes took place at the temperatures of the bulk chain-melting phase transitions, as determined by differential scanning calorimetry (DSC) for both aqueous, and water/ethanol DMPC, DPPC, and DPPC dispersions. An effect of the 'disperse medium' on h(w) was found for foam bilayers from DPPC. The results that foam bilayers could have different thickness at different temperatures disproved the current concept that NBF acquired constant thickness at concentrations higher than C(el,cr). The data for Cc were analysed on the basis of the hole-nucleation theory of bilayer stability of Kashchiev and Exerowa. This theory considered the amphiphile bilayer as a two-dimensional ordered system with short-range molecular interactions between the first neighbour molecules (as in a crystal). The short-range molecular interactions were presented by the parameter binding energy Q of an amphiphile molecule in the bilayer. The binding energy Q of two neighbouring phospholipids was calculated for the gel (30-60 kT) and liquid crystalline state (16-18 kT) of the bilayers from DMPC, DPPC, Egg PC, AF. Concentration/temperature phase diagram of DPPC foam bilayers that defined regions of gaseous (ruptured), gel and liquid crystalline foam bilayers were drawn. The values of Q obtained for various samples were very close and vary from 5.3 x 10(-20) to 9.4 x 10(-20) (approx. 13-22 kT) which indicated that in all cases the foam bilayers were in liquid-crystalline state. This is an important result since the parameter studied-threshold concentration (threshold dilution) is crucial for a very successful assessment of the risk for respiratory distress syndrome (RDS) in newborns and could be employed in medicine for assessment of other respiratory disturbances. It is to be expected that foam bilayers from phospholipids could be used as a model for investigation of short-range forces in biological structures, of interaction between membranes, etc.     

Impact on lipid membrane organization by free branched-chain fatty acids

Here, we exploit the non-invasive techniques of solid-state NMR (nuclear magnetic resonance) and differential scanning calorimetry (DSC) to study the effect of free iso and ante-iso branched chain fatty acids (BCFAs) on the physicochemical properties of lipid membranes. Free fatty acids are present in biological membranes at low abundance, but can influence the cellular function by modulating the membrane organization. Solid state NMR spectra of dimyristoylphosphatidylcholine (DMPC) lipid membranes containing either free 12-methyltetradecanoic acid (a15:0) or free 13-methyltetradecanoic acid (i15:0), show significant differences in their impact on the lipid bilayer. Chain order profiles obtained by deuterium NMR on fully deuterated DMPC-d(67) bilayers revealed an ordering effect induced by both fatty acids on the hydrophobic membrane core. This behavior was also visible in the corresponding DSC thermograms where the main phase transition of DMPC bilayers-indicative of the hydrophobic membrane region-was shifted to higher temperatures, with the iso isomer triggering more pronounced changes as compared to the ante-iso isomer. This is probably due to a higher packing density in the core of the lipid bilayer, which causes reduced diffusion across membranes. By utilizing the naturally occurring spin reporters nitrogen-14 and phosphorus-31 present in the hydrophilic DMPC headgroup region, even fatty acid induced changes at the membrane interface could be detected, an observation reflecting changes in the lipid headgroup dynamics.     

Monomeric fullerenes in lipid membranes: effects of molecular shape and polarity

We report a combined theoretical and experimental study on the single-molecule interaction of fullerenes with phospholipid membranes. We studied pristine C(60) (1) and two N-substituted fulleropyrrolidines (2 and 3), one of which (3) bore a paramagnetic nitroxide group. Theoretical predictions of fullerene distribution and permeability across lipid bilayers were combined with electron paramagnetic resonance (EPR) experiments in aligned DMPC/DHPC bicelles containing the paramagnetic fulleropyrrolidine 3 or either one of the diamagnetic fullerenes together with spin-labeled lipids. We found that, at low concentrations, fullerenes are present in the bilayer as single molecules. Their preferred location in the membrane is only slightly influenced by the derivatization: all derivatives were confined just below the hydrophilic/hydrophobic interface, because of the key role played by dispersion interactions between the highly polarizable fullerene cage and the hydrocarbon chains, which are especially tight within this region. However, the deviation from spherical shape is sufficient to induce a preferential orientation of 2 and 3 in the membrane. We predict that monomeric fullerenes spontaneously penetrate the bilayer, in agreement with the results of molecular dynamics simulations, but we point out the limits of the currently used permeability model when applied to hydrophobic solutes.     

Polarization modulation infrared reflection-absorption spectroscopy studies of the influence of perfluorinated compounds on the properties of a model biological membrane

A combination of the Langmuir-Blodgett and Langmuir-Schaefer techniques has been used to build a 1,2-dimyristoyl- sn-glycero-3-phosphocholine (DMPC) bilayer at a Au(111) electrode surface with hydrogen-substituted acyl chains in the top leaflet (solution side) and deuterium-substituted acyl chains in the bottom leaflet (gold side). Polarization modulation infrared reflection-absorption spectroscopy was used to determine changes in the conformation and orientation of the acyl chains of DMPC caused by the incorporation of two selected perfluorinated compounds, perfluorooctanoic acid (PFOA) and perfluorooctanesulfonic acid (PFOS), into the top leaflet of the bilayer. The incorporation of perfluorinated compounds into the DMPC bilayer caused a broadening of the methylene peaks and a shift in the methylene band positions toward higher frequencies. In addition, the tilt angle of the acyl chains decreased in comparison to the tilt angle of a pure DMPC bilayer. The reported tilt angles were smaller upon insertion of PFOS ( approximately 24 degrees ) than in the presence of PFOA ( approximately 30 degrees ). Overall, the results show that the incorporation of the perfluorinated acids has an effect on the bilayer similar to that of cholesterol by increasing the membrane fluidity and thickness due to a decrease in the tilt angle of the acyl chains.     

Bilayer in small bicelles revealed by lipid-protein interactions using NMR spectroscopy

Intermolecular nuclear Overhauser effects (NOEs) between the integral outer membrane protein OmpX from Escherichia coli and small bicelles of dihexanoyl phosphatidylcholine (DHPC) and dimyristoyl phosphatidylcholine (DMPC) give insights into protein-lipid interactions. Intermolecular NOEs between hydrophobic tails of lipid and protein in the bicelles cover the surface area of OmpX forming a continuous cylindric jacket of approximately 2.7 nm in height. These NOEs originate only from DMPC molecules, and no NOEs from DHPC are observed. Further, these NOEs are mainly from methylene groups of the hydrophobic tails of DMPC, and only a handful of NOEs arise from methyl groups of the hydrophobic tails. The observed contacts indicate that the hydrophobic tails of DMPC are oriented parallel to the surface of OmpX and thus DMPC molecules form a bilayer in the vicinity of the protein. Thus, a bilayer exists in the small bicelles not only in the absence of but also in the presence of a membrane protein. In addition, the number of NOEs between the polar head groups of lipid molecules and protein is increased in the bicelles compared with those in micelles. This observation may be due to the closely packed head groups of the bilayer. Moreover, irregularity of hydrophobic interactions in the middle of the bilayer environment was observed. This observation together with the interactions between polar head groups and proteins gives a possible rationale for structural and functional differences of membrane proteins solubilized in micelles and in bilayer systems and hints at structural differences between protein-free and protein-loaded bilayers.     

Solid-state 2H NMR studies of the effects of cholesterol on the acyl chain dynamics of magnetically aligned phospholipid bilayers

We report the utilization of magnetically aligned phospholipid bilayers (bicelles) to study the effects of cholesterol in phospholipid bilayers for both chain perdeuterated DMPC and partially deuterated alpha-[2,2,3,4,4,6-d(6)]-cholesterol using (2)H solid-state NMR spectroscopy. The quadrupolar splittings at 40 degrees C were 25.5 and 37.7 kHz, respectively, for the 2,4-(2)H(eq) and 2,4-(2)H(ax) deuterons when the bilayer normal of the discs was aligned perpendicular to the static magnetic field. The quadrupolar splittings were doubled when Yb(3+) ions were added to flip the bicelles 90 degrees such that the bilayer normal was colinear with the magnetic field. The results suggest that cholesterol is incorporated into the bicelle discs. For chain perdeuterated DMPC-d(54), incorporated into DMPC-DHPC bicelle discs, the individual quadrupolar splittings of the methylene and methyl groups doubled on going from the perpendicular to the parallel alignment. Also, the presence of cholesterol increased the overall ordering of the acyl chains of the phospholipids. S(CD) (i) calculations were extracted directly from the (2)H quadrupolar splittings of the chain perdeuterated DMPC. The order parameter, S(CD) (i), calculations clearly indicated an overall degree of ordering of the acyl chains in the presence of cholesterol. We also noted a disordering effect at higher temperatures. This study demonstrates the ease with which (2)H order parameters can be calculated utilizing magnetically aligned phospholipid bilayers when compared with randomly dispersed membrane samples.     

Atomic force microscope studies on the interactions of Candida rugosa lipase and supported lipidic bilayers

Using the Langmuir–Blodgett technique we prepared substrate supported well-defined lipid/phospholipid (1-mono-palmitoyl-rac-glycerol (MPG)/l,2-dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC)) bilayers in which the MPG lipid leaflet was exposed to the aqueous phase. Hydrolysis of MPG performed by Candida rugosa lipase (CRL) on the upper MPG layer of these supported bilayers on mica was imaged by real time atomic force microscope (AFM) using a liquid cell, so that the area increase of the initial structural defects could be followed over time. Our data strongly suggest that the edges of the initial structural defects are the preferred activation sites for CRL once the enzyme is adsorbed onto these interfaces. When a 2.5 nM bulk concentration of CRL was assayed on this planar lipid substrate, we found a long lag phase before a sharp increase of catalytic activity. The lag–burst kinetic behaviour was related to the interfacial activation phenomenon although we propose that it is also dependent on the gel-phase state of this interface.