Recent advances in nanomaterial-based electrochemical sensing of nitric oxide and nitrite for biomedical and food research

Nitric oxide (NO) and nitrite are of significant importance in clinical/biomedical research and in quality control applications for the food industry. Electrochemical sensing of NO and nitrite has been extensively pursued over the last two years. Efficient interfaces based on functional nanomaterials and bioactive molecules (e.g. metals, metal oxides, carbon-based nanomaterials, conducting polymers, and heme proteins) have been widely explored toward sensor development. Herein, we review the most recent advances in the electrochemical sensing of NO and nitrite, while the critical roles of nanomaterials in the design of advanced electrochemical sensors are highlighted.     

微波法制备石墨烯及石墨烯基材料的研究进展

石墨烯(Gr)由于其独特的单原子层二维结构及优异的性能,在材料、电子、化学、能源、生物医药等众多领域具有广阔的应用前景,引起了众多学者的研究兴趣。如何高产量获得高质量的Gr对其未来的开发和应用至关重要。微波法是制备Gr的重要方法之一,具有绿色、高效、简便快捷等特点。本文综述了近几年微波法制备Gr、掺杂Gr和Gr基纳米复合材料的研究进展以及后者在锂离子电池负极材料方面的应用,并对其发展方向进行了展望。     

Facile synthesis of cobalt oxide/reduced graphene oxide composites for electrochemical capacitor and sensor applications

Reduced graphene oxide sheets decorated with cobalt oxide nanoparticles (Co₃O₄/rGO) were produced using a hydrothermal method without surfactants. Both the reduction of GO and the formation of Co₃O₄ nanoparticles occurred simultaneously under this condition. At the same current density of 0.5 A g⁻¹, the Co₃O₄/rGO nanocomposites exhibited much a higher specific capacitance (545 F g⁻¹) than that of bare Co₃O₄ (100 F g⁻¹). On the other hand, for the detection of H₂O₂, the peak current of Co₃O₄/rGO was 4 times higher than that of Co₃O₄. Moreover, the resulting composite displayed a low detection limit of 0.62 μM and a high sensitivity of 28,500 μA mM⁻¹cm⁻² for the H₂O₂ sensor. These results suggest that the Co₃O₄/rGO nanocomposite is a promising material for both supercapacitor and non-enzymatic H₂O₂ sensor applications.     

Gold Nanoparticles Decorated Graphene as a High Performance Sensor for Determination of Trace Hydrazine Levels in Water

Electrochemical sensors provide a selective, sensitive and an easy approach to detect hazardous substances such as hydrazine. Herein, we investigate a facile route for the fabrication of a nanostructured composite based on Au nanoparticles (AuNPs) decorated graphene and present its sensing performance towards hydrazine. Our strategy involves electrophoretic deposition (EPD) of graphene oxide (GO) on Au substrate to obtain a uniform layer EPD‐GO, followed by electrochemical reduction of GO to yield high quality graphene ERGO and electrodeposition of monodispersed AuNPs on ERGO (AuNPs/ERGO/Au). The modified AuNPs/ERGO/Au electrode was characterized using scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FT‐IR) techniques. The sensor exhibited an improved catalytic activity with a peak potential of +87 mV (vs. Ag/AgCl) for hydrazine oxidation. The high performance of this hybrid electrode is due to the presence of a synergistic effect between AuNPs and ERGO at their interface. Insights into the mechanism and kinetics of hydrazine oxidation are withdrawn from varying the voltage scan rate as the reaction is fully irreversible and diffusion‐controlled. The proposed hydrazine sensor showed suitability for nanomolar detection (detection limit of 74 nM), high selectivity in the presence of common ions and efficiency for application in water samples.     

Recent progress in improving the performance of in vivo electrochemical microsensor based on materials

In vivo monitoring of neurochemicals is important for exploring the mechanism and function of the central nervous system. In vivo electrochemical microsensor benefiting from high temporal and spatial resolution has been demonstrated to be one effective strategy for neurochemical detection. However, due to the complex biological environment, microsensor faces huge challenges in sensitivity, selectivity, stability, and biocompatibility. Materials with good electron-transfer, rough surface, and easy functionalization are widely used to enhance the performance of microsensor. In this review, we summarize the recent progress in improving the performance of in vivo electrochemical microsensor based on materials.     

Recent developments in the adsorptive removal of heavy metal ions using metal-organic frameworks and graphene-based adsorbents

Clean and potable water is a growing concern around the globe. Among the different water pollutants, heavy metal ions pose a serious health concern to all living beings. The quest for new adsorbents to remove heavy metal ions received a boost with the development in the field of metal-organic framework (MOF). The advancement in synthetic strategies and designing of MOF enabled the researchers to tune the adsorption characteristics and tailor the material specific to a heavy metal ion. Similar to MOF, graphene-based two-dimensional and three-dimensional materials are also promising due to the diverse functionalization possibilities and cost-effectiveness. There had been growing interest in applying MOF and graphene-based materials for the removal of heavy metal ions in the past decade. This review summarizes these developments in detail.     

Cysteine combined with carbon black as support for electrodeposition of poly (1,8-Diaminonaphthalene): Application as sensing material for efficient determination of nitrite ions

Poly 1,8-Diaminonaphtahlene/cysteine (poly 1,8-DAN/Cys) combined with carbon black (CB) nanoparticles are proposed as an excellent sensor for the detection of nitrite ions. To design the electrocatalyst, a simple approach consisting on drop-casting method was applied to disperse carbon black on the surface of glassy carbon electrode, followed by the immobilization of cysteine on the surface of CB nanoparticles. The electrochemical polymerization of 1,8-Diaminonaphthalene was conducted in acidic medium by using cyclic voltammetry. The prepared hybrid material was denoted poly 1,8-DAN /Cys/CB. Several methods were used to characterize the structural and electrochemical behavior of the reported hybrid material including Fourier transform infrared spectroscopy (FTIR), Scanning electron microscopy (SEM), cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), amperometry and differential pulse voltammetry (DPV). The prepared electrode displayed an outstanding electroactivity towards nitrite ions reflected by an enhancement in the intensity of the current and a decrease of the charge transfer resistance. Poly 1,8-DAN/Cys/CB displayed an excellent sensing performance towards the detection of nitrite with a very low detection limit of 0.25 µM. Two linear ranges of 1–40 µM and 20–210 µM when using amperometry and differential pulse voltammetry (DPV) were obtained respectively. This work highlights the simple preparation of a polymeric film rich in amine and thiol groups for nitrite detection.     

Recent advances in sensing and biosensing with arrays of nanoelectrodes

This review deals with recent advances in the field of electrochemical sensing and biosensing with nanoelectrode ensembles (NEEs) and nanoelectrode arrays (NEAs), focusing mainly on articles published since 2015. At first, a brief introduction on the properties and possible advantages which characterize electroanalytical signals at the NEE/NEA is presented, followed by an overview on the most recent theoretical advances concerning the modeling of relevant electrochemical signals. Novel nanofabrication methods and nanoelectrode materials are discussed together with original (bio)funtionalization procedures, suitable to obtain more sensitive and reliable sensors. Advanced applications of NEE/NEA-based sensors in the biological and biomedical field are presented, including their integration with living cells and application for neurochemical studies. Advances, present limits, and prospects for research in the area are finally discussed. As far as future research trends are concerned, on the one hand, there is a need for development of theoretical models which take into account specific effects that can rule electrochemistry with arrays of nanosized electrodes, such as double layer and quantum mechanical effects. On the other hand, frontier studies concerning the application of the NEE/NEA to the biomedical and neurochemical fields can open new tracks both to fundamental knowledge and application.     

A new crown ether annelated tetrathiafulvalene derivative with anthracene moiety as a sensor for Li and O2

A new crown ether annulated tetrathiafulvalene derivative with an anthracene moiety is shown to act as a dual-functional sensor for Li⁺ and ¹O₂, which may be useful in information processing at the molecular level.     

Preparation of NiFe2O4/graphene nanocomposite and its application as a modifier for the fabrication of an electrochemical sensor for the simultaneous determination of tramadol and acetaminophen

An effective electrochemical sensor for the rapid and simultaneous determination of tramadol and acetaminophen based on carbon paste electrode (CPE) modified with NiFe₂O₄/graphene nanoparticles was developed. The structures of the synthesized NiFe₂O₄/graphene nanocomposite and the electrode composition were confirmed by X-ray diffraction (XRD) spectrometry, Fourier transform infrared (FT-IR) spectrometry and scanning electron microscopy (SEM). The peak currents of square wave voltammetry of tramadol and acetaminophen increased linearly with their concentration in the range of 0.01–9 μmol L⁻¹. The detection limit for their determination was found to be 0.0036 and 0.0030 μmol L⁻¹, respectively. The results show that the combination of graphene and NiFe₂O₄ nanoparticles causes a dramatic enhancement in the sensitivity of the sensor. The fabricated sensor exhibited high sensitivity and good stability, and would be valuable for the clinical assay of tramadol and acetaminophen.     

A new modified conducting carbon composite electrode as sensor for ascorbate and biosensor for glucose

A new carbon-based conducting composite has been developed as electrochemical sensor and biosensor for the amperometric detection of ascorbate and glucose. Electrocatalytic oxidation of ascorbate has been done successfully at unmodified cellulose acetate-graphite composite electrodes, the sensor being highly sensitive, selective and with a low detection limit at 0.0 V vs. SCE and was successfully applied for ascorbate determination in commercial fruit juice samples. An interference free glucose biosensor has also been developed, based on the immobilisation of glucose oxidase by cross-linking with glutaraldehyde on poly (neutral red) modified composite electrodes. The biosensor exhibits a higher sensitivity of 31.5 ± 1.7 µA cm^− 2 mM^− 1 than other carbon-composite-based glucose biosensors, a detection limit of 20.3 µM and a very short response time.     

Recent progress in applications of graphene oxide for gas sensing: A review

This paper is a review of the recent progress on gas sensors using graphene oxide (GO). GO is not a new material but its unique features have recently been of interest for gas sensing applications, and not just as an intermediate for reduced graphene oxide (RGO). Graphene and RGO have been well known gas-sensing materials, but GO is also an attractive sensing material that has been well studied these last few years. The functional groups on GO nanosheets play important roles in adsorbing gas molecules, and the electric or optical properties of GO materials change with exposure to certain gases. Addition of metal nanoparticles and metal oxide nanocomposites is an effective way to make GO materials selective and sensitive to analyte gases. In this paper, several applications of GO based sensors are summarized for detection of water vapor, NO₂, H₂, NH₃, H₂S, and organic vapors. Also binding energies of gas molecules onto graphene and the oxygenous functional groups are summarized, and problems and possible solutions are discussed for the GO-based gas sensors.     

Preparation of cauliflower-like bismuth sulfide and its application in electrochemical sensor

A solvothermal process was developed for the preparation of cauliflower-like Bi2S3 from N,N-dimethylformamide （DMF） solution of bismuth nitrate [Bi（NO3）3.5H2O] and thioacetamide （TAA） with 2-undecyl-1-dithioureido-ethyl-imidazoline （SUDEI） as the morphology-controlling agent. The obtained Bi2S3 products were characterized by transmission electron microscopy （TEM）, scanning electron microscopy （SEM）, and X-ray diffraction （XRD）, etc. The sensing properties of Bi2S3 with different morphologies were evaluated by the electrochemical analysis of dopamine （DA） and ascorbic acid （AA） coexisting solution. The results showed that cauliflower-like Bi2S3 showed a better resolving ability than rod-like Bi2S3 for the simultaneous determination of DA and AA,     

Interaction of cholesterol with artificial bilayer lipid membrane system and development of an electrochemical sensor

Interaction of Cholesterol with the bilayer arrangement of phospholipid molecules was studied using electrochemical impedance spectroscopy in Sodium Chloride (NaCl) bath solutions. The membrane resistance (R_m) was decreased from 3.35 GΩ in 1.0 M NaCl bath to 0.756 GΩ in 0.01 M NaCl bath. The cholesterol molecules were found to penetrate into Bilayer Lipid Membrane (BLM) and fluidized the BLM phase. Due to fluidization, the membrane resistance was decreased. The fluidization effect of cholesterol was dependent on the concentration of bath solutions. In 1.0 M NaCl bath solution, the membrane was stable up to 200 µM concentration of cholesterol. With the addition of cholesterol in NaCl bath solutions, the membrane capacitance was increased. An impedimetric sensor was developed based on the membrane resistance in the presence of cholesterol at various concentrations. The detection limit of cholesterol by impedimetric sensor was dependent on the concentration of NaCl in the bath.     

Recent advancements in graphene adsorbents for wastewater treatment: Current status and challenges

From emerging pollutants to emerged threat, researchers are continuously looking for promising technologies for wastewater treatment. Adsorption has been identified as the most convenient approach for treating wastewater at low-cost and with high-efficiency. Recently, graphene and its derivatives have gained heightened attention as novel adsorbents because of their unique molecular structure and outstanding physicochemical properties. Heavy metals, dyes, polycyclic aromatic hydrocarbons (PAHs) and other pollutants, which are widely concerned recently, all show different adsorption behaviors. Numerous functional groups, resonating and delocalized π-electron system of graphene derivatives lead to the formation of various adsorptive interactions i.e., π-π interactions, electrostatic interactions, H-bonding, etc. with these venomous pollutants, and quarantine them in solution. The pristine form of graphene subsidiaries tends to exhibit low sorption efficiency due to high propensity of agglomeration, lack of selectivity, hydrophobicity and difficulty in phase separation after treatment. Therefore, designing of efficient graphene composites through the surface modification with numerous functional groups, polymers or nanoparticles is an ongoing challenge. Complex graphene composites are increasingly reported, but the fate of pollutants and adsorption mechanisms are still far to be fully clarified. This review summarizes the recent progresses in the application of graphene-based adsorbents for eliminating a wide range of organic and inorganic pollutants from wastewater. A critical explanation is provided on the synthesis of graphene adsorbents, systematic adsorption and desorption mechanisms along with their pollutant removal performances under different experimental conditions. A brief perspective on upcoming research needs and challenges involved in the designing of high-quality graphene-based adsorbents are highlighted.     

An electropolymerized Nile Blue sensing film-based nitrite sensor and application in food analysis

This paper reports a poly-Nile Blue (PNB) sensing film based electrochemical sensor and the application in food analysis as a possible alternative for electrochemical detection of nitrite. The PNB-modified electrode in the sensor was prepared by in situ electropolymerization of Nile Blue at a prepolarized glassy carbon (GC) electrode and then characterized by cyclic voltammetry (CV) and pulse voltammetry in phosphate buffer (pH 7.1). Several key operational parameters affecting the electrochemical response of PNB sensing film were examined and optimized, such as polarization time, PNB film thickness and electrolyte pH values. As the electroactive PNB sensing film provides plenty of active sites for anodic oxidation of nitrite, the nitrite sensor exhibited high performance including high sensitivity, low detection limit, simple operation and good stability at the optimized conditions. The nitrite sensor revealed good linear behavior in the concentration range from 5.0 × 10⁻⁷ mol L⁻¹ to 1.0 × 10⁻⁴ mol L⁻¹ for the quantitative analysis of nitrite anion with a limit of detection of 1.0 × 10⁻⁷ mol L⁻¹. Finally, the application in food analysis using sausage as testing samples was investigated and the results were consistent with those obtained by standard spectrophotometric method.     

First Report for Electrochemical Determination of Levodopa and Cabergoline: Application for Determination of Levodopa and Cabergoline in Human Serum,Urine and Pharmaceutical Formulations

The electrochemical oxidation of levodopa on the surface of a carbon paste electrode modified with graphene nanosheets, 1‐(4‐bromobenzyl)‐4‐ferrocenyl‐1H‐[1,2,3]‐triazole (1,4‐BBFT) and hydrophilic ionic liquid (n‐hexyl‐3‐methylimidazolium hexafluoro phosphate) as a binder is studied. It has been found that the oxidation of levodopa at the surface of a modified electrode occurs at a potential of about 210 mV less positive than that of an unmodified carbon paste electrode (CPE). The prepared modified electrode exhibits a very good resolution of the voltammetric peaks of levodopa and cabergoline. The electrode has been applied successfully for the determination of levodopa and cabergoline in some real samples.     

Simultaneous determination of nitrite and nitrate in human plasma by on-capillary preconcentration with field-amplified sample stacking

A simple method for the determination of nitrite and nitrate in human plasma has been developed using CZE with minimal sample preparation. Field‐amplified sample stacking (FASS) was used to achieve submicromolar detection by dilution of the plasma sample with deionized water. In CZE, the separation of nitrite and nitrate was achieved within 10 min without adding EOF modifier. The optimal condition was achieved with 50 mM phosphate buffer at pH 9.3. The ninefold diluted plasma samples were injected hydrodynamically for 40 s into a 60 cm×75 μm id uncoated fused‐silica capillary. The separation voltage was 20 kV (negative potential) and UV detection was performed at 214 nm. The linearity curves for nitrite and nitrate were obtained by the standard addition method. The estimated LODs for nitrite and nitrate in ninefold diluted plasma sample were 0.05 and 0.07 μM, respectively. The LODs for nitrite and nitrate in original plasma samples were 0.45 and 0.63 μM. The intra‐ and inter‐day precisions for both analytes were <2.6% and the recovery ranged between 92.3 and 113.3%. It was found that nitrite was more stable than nitrate in the plasma after the sample preparation. This proposed method was applied to a number of human plasma samples and the measured nitrite and nitrate concentrations in human plasma were consistent with the literature ranges.     

Recent advances in electrochemical sensors for antibiotics and their applications

The abuse of antibiotics will cause an increase of drug-resistant strains and environmental pollution,which in turn will affect human health.Therefore,it is important to develop effective detection techniques to determine the level of antibiotics contamination in various fields.Compared with traditional detection methods,electrochemical sensors have received extensive attention due to their advantages such as high sensitivity,low detection limit,and good selectivity.In this mini review,we summarized the latest developments and new trends in electrochemical sensors for antibiotics.Here,modification methods and materials of electrode are discussed.We also pay more attention to the practical applications of antibiotics electrochemical sensors in different fields.In addition,the existing problems and the future challenges ahead have been proposed.We hope that this review can provide new ideas for the development of electrochemical sensors for antibiotics in the future.     

Engineering heterostructure and crystallinity of Ru/RuS2 nanoparticle composited with N-doped graphene as electrocatalysts for alkaline hydrogen evolution

Crystalline engineering and heterostructure have attracted much attention as effective strategies to improve the electrocatalytic activity for hydrogen evolution reaction (HER). In this study, a new heterostructure catalyst (Ru/RuS₂@N-rGO) with low crystallinity was fabricated by a simple and low-temperature method for HER in alkaline solution, applying the Na₂SO₄ as S source and polypyrrole as N source. Optimizing through the controllable crystalline engineering and composition ratio of Ru and RuS₂, the Ru/RuS₂@N-rGO heterocatalyst at the calcining 500 °C revealed highly efficient HER activity with overpotential 18 mV at a current density 10 mA/cm² and remarkable stability for 24 h in 1.0 mol/L KOH. This work provides a facile and effective method in designing advanced electrocatalysts for HER in the alkaline electrolytes by synergistically structural and component modulations.