Diffuse reflectance infrared Fourier transform spectroscopy as a tool to characterise water in adsorption/confinement situations

We present experimental data acquired by diffuse reflectance infrared spectroscopy in the mid-IR (4000-400 cm(-1)), on micrometric-sized mineral grain powders. The spectral evolution of the OH-stretching band is followed when the adsorbed water film is thinned under dry conditions, from high to low hydration states. The IR bands are found to be characteristic of the degree of adsorption/confinement of the liquid water. The OH-stretching band is shifted toward shorter wavenumbers than in bulk water, showing that a significant portion of adsorbed water has a higher intermolecular bonding energy. Complementary treatment of the kinetics of water desorption, varying with the surface forces in the water film, confirms the relationships of these bands with the constrained water state. We distinguish different water types obeying liquid-liquid interactions (free and capillary water) or dominated by solid-water interactions (confined and adsorbed water). Part of this study is devoted to mesoporous silica MCM-41, of interest due to the restricted geometries of its mesopores (4.7 nm) favouring the confined water state. The methodology allows us to distinguish bulk and adsorbed/confined water, using spectral analysis coupled with an understanding of the dynamic behaviour of the desorption process.     

Fourier transform infrared study of low-temperature CO adsorption on CuMgAl-hydrotalcite

Single-phase CuMgAl ternary hydrotalcite with (Cu+Mg)/Al atomic ratio of 3.0 and Cu/Mg atomic ratio of 1.0 was synthesized by coprecipitation. Thermoanalytical studies of this sample showed transformations in three stages in the temperature range up to ca. 900 K yielding mainly CuO phase. In situ diffuse reflectance infrared Fourier transform (DRIFT) spectroscopic measurements showed the presence of carbonates even after calcination of the sample at 973 K. The genesis of Cu+ sites during thermal treatment in vacuo at different temperatures for this sample was followed by IR spectroscopy of CO adsorbed at low temperature. Essentially no Cu+ sites are present on a sample calcined at 723 K, consistent with X-ray photoelectron spectroscopic (XPS) data. However, sample subjected to activation (1 h of O2 treatment at 723 K followed by 1 h of evacuation at the same temperature) upon CO adsorption at 85 K unambiguously showed the presence of Cu+ sites. 12CO-13CO coadsorption studies confirmed the presence of dicarbonyls, which are converted to linear Cu+-CO species during evacuation at 85 K. Concentration of the accessible Cu+ sites increased with the increase in activation temperature up to 873 K and decreased with a further temperature rise. The copper sites on the sample are heterogeneously distributed and their distribution depends on the activation temperature. Two routes of reduction of Cu2+ to Cu+ are proposed: (i) autoreduction during evacuation and (ii) reduction by CO.     

Fourier transform infrared spectroscopic study of surface acidity by pyridine adsorption on Mo/ZrO2-SiO2(Al2O3) catalysts

Acidity of the oxidic molybdenum catalysts supported on mixed ZrO2-SiO2 and ZrO2-Al2O3 carriers was investigated by Fourier transform infrared spectroscopy of pyridine adsorption. Deposition of molybdenum on ZrO2-SiO2 and ZrO2-Al2O3 supports leads to formation of surface Br?nsted acid sites. The number of the Br?nsted and Lewis acid sites in supported-molybdenum catalysts depends on both the ZrO2 content and the type of the support. With increasing ZrO2 content, the Lewis acid sites increase for both series of catalysts. The Br?nsted acid sites are higher for Mo/ZrO2-SiO2 samples compared to those for Mo/ZrO2-Al2O3 and also increase with zirconia.     

Competitive adsorption of NO, NO2, CO2, and H2O on BaO(100): a quantum chemical study

Density functional theory (DFT) quantum chemical calculations are used to determine adsorption energies and geometries of NO, NO(2), CO(2), and H(2)O on a barium oxide (100) surface. The study includes two adsorption geometries for NO(2). All species form thermodynamically stable adsorbates, and adsorption strength increases in the order NO(2) < H(2)O < NO 相似文献   

Fourier transform infrared study of poly (2-hydroxyethyl methacrylate) PHEMA

 Fourier transform infrared spectra in the wave number range 450–4500 cm^-1 of poly (2-hydroxy-ethyl methacrylate) PHEMA have been studied as functions of water content in the range 38–2.6 wt% and of temperature in the range 300–373 K. The results show changes in the intensities of the stretching frequencies of the carbonyl band, H–O–H bending vibration and O–H stretching vibration with a change in water content and temperature. The results confirm two types of water in the hydrogel polymer system, tightly bound water and loosely bound water. At low concentrations, water is mainly hydrogen-bonded to the polymer and is described as tightly bound water. However, at water concentrations greater than 18% by weight, part of the water exists in a different form and behaves as loosely bound water. For concentrations over 30%, there is some evidence that excess water behaves more loosely bound somewhat like bulk water. Infrared spectroscopic results supplement those obtained by means of NMR by Smyth et al. and by dielectric spectroscopy. Our results also show that some of the water continues to be hydrogen bonded to the polymer until at least a temperature of 373 K when the bulk water should have evaporated. FTIR is found to yield greater site-specific insight into the local behaviour of water in hydrated PHEMA. Received: 22 August 1996 Accepted: 11 November 1996     

Diffuse reflectance fourier transform infrared spectroscopic study of the thermal degradation of barley protein

Diffuse reflectance infrared spectroscopy was used to study isothermal degradation of crude barley protein, that was obtained as a side product of alcohol production. The isothermal temperatures used were in the range 50–150° C. Before analysis the protein fraction was dried either by lyophilization or spray drying. The drying method did not have a major effect on the subsequent isothermal degradation of the material. The main reactions observed in the spectra were oxidation indicated by the appearance of a broad composite carbonyl band and degradation of both proteins and starch. The reactions were visible already in the spectra taken at 70° C and there rates gradually increased as the temperature was raised to 150° C.     

Diffuse reflectance infrared Fourier transform spectral study of the interaction of 3-aminopropyltriethoxysilane on silica gel. Behavior of amino groups on the surface

 Three silica gel sample systems, modified with 3-amino-propyltriethoxysilane (APTS), were prepared by sequentially sampling the reaction mixture at various time intervals, and the diffuse reflectance infrared Fourier transform (DRIFT) spectra of these samples were measured in the regions 2700–3500 and 1300–2000 cm^-1. The IR bands observed at 1597 and 1629–1633 cm^-1 were assigned to the deformation modes of NH₂ and NH⁺ ₃ groups, respectively. The intensities of these two bands are dependent on both the APTS concentration used in the preparation and the reaction time. The results are summarized as fol-lows. For the sample systems in which smaller APTS concentration were used, most of the NH₂ groups of the aminopropyl segments are converted into the NH⁺ ₃ groups on the surface, showing that the SiO^-…H⁺NH₂-type structure is predominantly stabilized on the surface of the silica gel. As the APTS concentration in the reaction mixture increases, the population of NH₂ groups in the silane layer coated onto the surface increases. Interpretation of the CH stretch region further suggests that cyclic structures may be formed on the surface as a consequence of the formation of NH⁺ ₃ groups. Received: 18 November 1996 Accepted: 14 February 1997     

NO2 adsorption on BaO/Al2O3: the nature of nitrate species

Temperature programmed desorption, infrared spectroscopy, and (15)N solid state NMR spectroscopy were used to characterize the nature of the nitrate species formed on Al(2)O(3) and BaO/Al(2)O(3) NO(x) storage/reduction materials. Two distinctly different nitrate species were found: surface nitrates that are associated with a monolayer BaO on the alumina support, and a bulk-like nitrate that forms on this thin BaO layer. The surface nitrates desorb as NO(2) at lower temperatures than do the bulk-like nitrates, which decompose as NO+O(2) at higher temperatures. The amount of NO(x) stored in the monolayer nitrate is proportional to the surface area of the catalyst, while that in the bulk nitrate increases with BaO coverage.     

Fourier transform infrared study of the self reaction of C2H5O2 radicals in air at 295 K

Fourier transform infrared spectroscopy was used to identify and quantify products of the self reaction of ethylperoxy radicals, C₂H₅O₂, formed in the photolysis of Cl₂/C₂H₆ mixtures in 700 torr total pressure of synthetic air at 295 K. From these measurements, branching ratios for the reaction channels (1) of k_1a/(k_1a + k_1b) = 0.68 and k_1c/(k_1a + k_1b + k_1c) ? 0.06 were established. Additionally, using the relative rate technique, the rate constant for the reaction of Cl atoms with C₂H₅OOH was determined to be (1.07 ± 0.07) × 10^?10 × cm³ molecule^?1 s^?1. Results are discussed with respect to the previous kinetic and mechanistic studies of C₂H₅O₂ radicals.     

Surface study of hexagonal boron nitride powder by diffuse reflectance Fourier transform infrared spectroscopy

The surface chemistry of hexagonal boron nitride powder is examined. Surface functional groups are found to consist of a mixture of primary and secondary amine groups as well as hydroxyl groups. The surface has a net basic character indicating that the amine contribution to the overall surface chemistry is greater than that of the acidic hydroxyl contribution. A chemical surface treatment also is performed to modify the surface chemistry of hexagonal boron nitride powder. Copyright © 2005 John Wiley & Sons, Ltd.     

Neutral and zwitterionic glycine.H(2)O complexes: A theoretical and matrix-isolation Fourier transform infrared study

The H-bond interaction between glycine and H2O has been studied by a combined theoretical (DFT(B3LYP)/6-31++G(**)) and experimental (matrix-isolation FT-IR) methodology. The 1:1 and 1:2 complexes of the most stable conformation (I) of glycine appear to be neutral complexes which have been vibrationally characterized in detail. The higher stoichiometry complexes (glycine).(H2O)n with n larger than 3 are demonstrated to be zwitterionic H-bonded complexes. A set of characteristic IR absorption bands for this zwitterionic structure has been observed in low-temperature Ar matrices. This would be the first experimental IR evidence for proton transfer occurring between the NH2 and COOH groups of amino acids by a H-bonded water molecular channel in isolated conditions.     

Diffuse reflectance infrared fourier transform (DRIFT) spectroscopy in the preservation of historical monuments: Studies on salt migration

Analytical methods find increasing use in the preservation of historical monuments. We have investigated the salt migration of lithium carbonate under the influence of water (rain, soil humidity). Diffuse reflectance infrared fourier transform spectroscopy (DRIFT) provides rapid information with less time consumption for sample preparation compared to transmission IR spectroscopy. Quantitative data about lithium migration have been obtained by flame photometry.Dedicated to Professor Dr. rer.nat. Dr. h.c. Hubertus Nickel on the occasion of his 65th birthday     

Determination of airborne wood dust in Button samples by diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS)

Emerging concerns regarding the toxicity of inhaled wood dust support the need for techniques to quantitate wood content of mixed industrial dusts. The diffuse reflectance infrared Fourier transform spectroscopy (DRIFTS) analysis technique was applied to the determination of wood content of 181 inhalable dust samples (geometric mean concentration: 0.895?mg/m³; geometric standard deviation: 2.73) collected from six wood product industry factories using 25?mm glass fibre filters with the Button aerosol sampler. Prior to direct DRIFTS analysis the filter samples were treated with ethyl acetate and re-deposited uniformly. Standards ranging from 125?µg to 4000?µg were prepared for red oak, southern yellow pine, and red cedar and used for quantitation of samples depending upon the wood materials present at a given factory. The oak standards spectra were quantitated by linear regression of response in Kubelka-Munk units at 1736?cm^?1, whereas the pine standards and the cedar standards spectra were quantitated by polynomial regression of response in log 1/R units at 1734?cm^?1, with the selected wavenumbers corresponding to stretching vibration of free C=O from cellulose and hemicelluloses. For one factory which used both soft- and hard-woods, a separate polynomial standard curve was created by proportionally combining the oak and pine standards polynomial regression equations based on response (log 1/R) at 1734?cm^?1. The analytical limits of detection were approximately 52?µg of oak, 20?µg of pine, 30?µg of cedar, and 16?µg of mixed oak and pine for the factory with mixed woods. Overall, the average of dry wood dust percentage of inhalable dust was approximately 56% and the average dry wood dust weight was 0.572?mg for the Button samples. Across factories, there were statistically significant differences (p?<?0.001) for the percentage of dry wood dust in inhalable dust with factory averages ranging from 33.5 to 97.6%.     

Dissociative adsorption of NO on TiO2 (110)-(1 x 2) surface: Ti2O3 rows as actives sites for the adsorption

The interaction of NO with TiO2 (110)-(1 x 2) surface has been studied by X-ray photoelectron spectroscopy, ultraviolet photoelectron spectroscopy, Auger electron spectroscopy, and low-energy electron diffraction, with the aim to clarify the role of ordered defects in NO reactivity toward TiO2. The interaction was studied for exposures up to 2000 L. However, the main effects occur already in the first 2 L. The exposure of the surfaces to NO resulted in the healing of defect sites without adsorption of N and low-energy electron diffraction shows that the surface (1 x 2) symmetry is not lost after the NO dose.     

NO adsorption on MoS(x) clusters: a density functional theory study

The density functional theory (DFT) method has been used to investigate NO probe molecule adsorption on the stoichiometric (Mo(16)S(32)) and nonstoichiometric (Mo(16)S(34) and Mo(16)S(29)) clusters. The calculated adsorption energies indicate that the stoichiometric cluster has stronger NO affinity than the nonstoichiometric surfaces. It is also found that mononitrosyl adsorption is favored at low NO coverage, while dinitrosyl (germinal) and (NO)(2) dimer adsorption at high NO coverage are possible. Strong repulsive interaction has been found for the adsorbed dinitrosyl and (NO)(2) dimer species. In addition, the computed NO stretching frequencies for the mononitrosyl and dinitrosyl species agree well with the experimental data, while those of the dimer species are much lower than the suggested experimental data.     

Fourier transform infrared study of orientation and relaxation in poly(methyl methacrylate)

Infrared measurements of the dicroic ratio of poly-(methyl methacrylate) absorption bands provide a valuable method for determining the orientation as well as the relaxation of chains during stretching. Different strain rates and temperatures of stretching were used. Orientation relaxation was determined and a master curve was obtained at a reference temperature T_O = 135°C. The master curve shows that orientation relaxation behaves similarly to mechanical relaxation.     

超临界水热合成过渡金属改性铈基催化剂应用于CO-SCR脱硝研究

氮氧化物(NOx)作为煤炭燃烧过程主要污染物之一, 可直接或间接引起如光化学烟雾、酸沉降、平流层臭氧损耗和全球气候变化等大气环境污染问题. NOx的选择性催化还原技术(SCR)被认为是目前处理固定源NOx的最有效方法之一. 由于燃煤工业锅炉烟气中还有1%~3%的CO, 远高于NOx的0.02%~0.04%, 因此, 以CO为还原剂进行CO-SCR脱硝具有现实意义, 它可在反应过程中同时消除CO和NO两种有害气体, 但对催化剂的活性及抗毒性提出更高要求. CeO2作为一种常用的稀土材料, 因具有良好的储放氧能力而广泛应用于SCR反应中. 过渡金属改性可进一步改善CeO2的物化性能, 从而可能达到CO-SCR的应用要求.本文利用超临界水热技术合成了MOx-CeO2(M = Co, Fe, Cu)固溶体催化剂, 并利用X射线衍射(XRD), 氢气程序升温还原(H2-TPR), 傅里叶变换原位红外(DRFTIR)等探究了催化剂在CO-SCR反应中的催化活性与作用机制. CO-SCR反应活性测试表明, CuO-CeO2催化剂活性明显优于FeOx-CeO2和CoOx-CeO2催化剂, 在126 ℃ NO去除率即可达到90%; 其N2选择性也可在179 ℃时达到90%. 为了进一步探究MOx-CeO2(M = Co, Fe, Cu)催化剂的CO-SCR反应途径,本文随后进行了系列原位DRFTIR实验, 发现NO在三种催化剂表面均能被高效吸附, 其吸附态中间产物主要为双齿硝酸根, 桥式硝酸根, 桥式硝基和亚硝酰基等. 另外, 在CuO-CeO2催化剂表面还存有螯合硝基和单齿硝酸根. CO在催化剂表面主要以COx, 碳酸根和羧酸根等形式存在. 值得注意的是, 在CuO-CeO2表面, CO因吸附于Cu+而形成Cu+-CO, 在2100 cm-1左右形成明显的特征峰. 当催化剂表面吸附CO至饱和后再通入NO发现, CO的吸附特征峰逐渐被NO的特征吸附峰取代; 而当NO被吸附至饱和后再通入CO, NO的特征峰则不出现明显变化. 这表明NO和CO在催化剂表面存在竞争吸附, NO可能优先于CO吸附在催化剂表面. 当NO和CO同时通入红外反应仓时发现, 在CoOx-CeO2和FeOx-CeO2催化剂表面只观察到NO的吸附峰, 而在CuO-CeO2催化剂表面观察到Cu+-CO的特征峰, 说明在CO-SCR反应过程中, CO可以在Cu+表面被有效吸附,其与吸附于CeO2表面的NO物种反应生成N2和CO2, 遵循Langmuir-Hinshelwood反应机理. 而在CoOx-CeO2和FeOx-CeO2催化剂表面, 因NO的竞争吸附, 使得二者主要遵循Eley-Rideal反应机理.     

Raman,infrared and force field studies of K2(12)C2O4 x H2O and K2(13)C2O4 x H2O in the solid state and in aqueous solution,and of (NH4)2(12)C2O4 x H2O and (NH4)2(13)C2O4 x H2O in the solid state

The Raman and infrared spectra of solid K2(12)C2O4 x H2O are reported together with, for the first time, the corresponding Raman and infrared spectra of solid K2(13)C2O4 x H2O. Raman spectra of aqueous solutions of both isotopomers are also reported. In the solid state the oxalate anion is planar with D2h symmetry in this salt, whereas in aqueous solution the Raman spectra of the anion are best interpreted on the basis of D2d symmetry. The Raman spectra of solid (NH4)2(12)C2O4 x H2O and (NH4)2(13)C2O4 x H2O, in which the oxalate anion is twisted from planarity by 28 degrees about the CC bond, have also been recorded. Several reassignments have been made. The harmonic force field for the oxalate anion in the D2h, D2 and D2d geometries has been determined in part, and approximate values of key valence force constants determined. All the observed band wavenumbers and 12C/13C isotopic shifts are well reproduced by the force fields. The potential energy distribution of the totally symmetric normal modes of planar oxalate indicates that each mode consists of extensively mixed symmetry corrdinates and that the labels previously used for the bands seen here at 475 and 879 cm(-1) would better be described as v(CC) and deltaS(CO2), respectively, putting them in the same wavenumber order as v(NN) and deltaS(NO2) for the isoelectronic and isostructural molecule N2O4. The stretching force constants of N2O4 and planar C2O4(2-) are established to be in the order f(NN) < f(CC) and f(NO) > f(CO), consistent with the known relative bond lengths.