Synthesis of pyridyl derivatives for the future functionalization of biomolecules labeled with the fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript> precursor

In this paper, we investigated three ligand systems, symmetric and asymmetric pyridyl-containing tridentate ligands (L¹NH₂ = (bis(2-pyridylmethyl)-amino)-ethylamine, L²H = (bis(2-pyridylmethyl)-amino)-acetic acid, L³NH₂ = [(6-amino-hexyl)-pyridyl-2-methyl-amino]-acetic acid) as bifunctional chelating agents for labeling biomolecules. These ligands reacted with the precursor fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and yielded the radioactive complexes fac-[¹⁸⁸Re(CO)₃L] (L = three ligands), which were identified by RP-HPLC. The corresponding stable rhenium tricarbonyl complexes (1–3) were allowed for macroscopic identification of the radiochemical compounds. ¹⁸⁸Re tricarbonyl complexes, with log P _o/w values ranging from −1.36 to −0.32, were obtained with yields of ≥90% using ligand concentrations within the 10⁻⁶−10⁻⁴M range. Challenge studies with cysteine and histidine revealed the high stability properties of these radioactive complexes, and biodistribution studies in normal mice indicated a fast rate of blood clearance and high rate of total radioactivity excretion, primarily through the renal-urinary pathway. In summary, these asymmetric and symmetric pyridyl-containing tridentate ligands are potent bifunctional chelators for the future biomolecules labeling of fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺.     

Gas phase structure of micro-hydrated [Mn(ClO<Subscript>4</Subscript>)]<Superscript>+</Superscript> and [Mn<Subscript>2</Subscript>(ClO<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>+</Superscript> ions probed by infrared spectroscopy

Gas-phase infrared photodissociation spectroscopy is reported for the microsolvated [Mn(ClO₄)(H₂O) _n ]⁺ and [Mn₂(ClO₄)₃(H₂O) _n ]⁺ complexes from n = 2 to 5. Electrosprayed ions are isolated in an ion-trap where they are photodissociated. The 2600–3800 cm⁻¹ spectral region associated with the OH stretching mode is scanned with a relatively low-power infrared table-top laser, which is used in combination with a CO₂ laser to enhance the photofragmentation yield of these strongly bound ions. Hydrogen bonding is evidenced by a relatively broad band red-shifted from the free OH region. Band assignment based on quantum chemical calculations suggest that there is formation of water—perchlorate hydrogen bond within the first coordination shell of high-spin Mn(II). Although the observed spectral features are also compatible with the formation of structures with double-acceptor water in the second shell, these structures are found relatively high in energy compared with structures with all water directly bound to manganese. Using the highly intense IR beam of the free electron laser CLIO in the 800–1700 cm⁻¹, we were also able to characterize the coordination mode (η²) of perchlorate for two clusters. The comparison of experimental and calculated spectra suggests that the perchlorate Cl—O stretches are unexpectedly underestimated at the B3LYP level, while they are correctly described at the MP2 level allowing for spectral assignment.     

Synthesis,crystal structures,and antibacterial activities of Schiff base zinc(II) complexes [Zn(L<Superscript>1</Superscript>)<Subscript>2</Subscript>] and [Zn(L<Superscript>2</Superscript>)<Subscript>2</Subscript>]

The reaction of cyclopentylamine with 2-hydroxy-1-naphthaldehyde and 5-nitrosalicylaldehyde, respectively, in methanol affords two new Schiff bases, 1-(cyclopentyliminomethyl)naphthalen-2-ol (HL¹) and 4-nitro-2-(cyclopentyliminomethyl)phenol (HL²). Two new zinc(II) complexes, [Zn(L¹)₂] (I) and [Zn(L²)₂] (II), derived from the Schiff bases, have been prepared and characterized by single-crystal X-ray diffraction, FT-IR, and elemental analysis. Complex I crystallizes in the monoclinic space group P2₁/c with a = 17.834(4), b = 14.738(3), c = 9.868(2) Å, β = 91.20(3)°, V = 2593.1(9) ų, Z = 4. Complex II crystallizes in the triclinic space group P \(\bar 1\) with a = 10.206(1), b = 10.502(1), c = 12.554(1) Å, α = 66.771(2)°, β = 78.133(2)°, γ = 76.292(2)°, V = 1191.8(1) ų, Z = 2. The Zn atom in each complex is coordinated by two N and two O atoms from two Schiff base ligands, forming a tetrahedral geometry. The Schiff bases and the complexes were assayed for antibacterial activities.     

Crystal structure of two polymorphs of molybdenyl salicylidene-2-furfuriliminate (HL<Superscript>1</Superscript>) [MoO<Subscript>2</Subscript>(L<Superscript>1</Superscript>)<Subscript>2</Subscript>]

The crystal structures of two polymorphs of molybdenyl salicylidene-2-furfuryliminate [MoO₂(L¹)₂] have been solved by X-ray diffraction. Both complexes crystallize in centrosymmetric and non-centrosymmetric space groups (P2₁/c and Р2₁, respectively) of monoclinic system and have similar structures and close geometric parameters. The Мо atoms have a distorted octahedral coordination to two terminal oxo ligands in cis-positions to each other and two pairs of the oxygen atoms (cis- to О(oxo)) and the nitrogen atoms (trans- to О(oxo)) of two bidentate chelate ligands (L¹)^–.     

Synthesis,DNA-binding and photocleavage studies of cobalt(III) complexes [Co(bpy)<Subscript>2</Subscript>(dpta)]<Superscript>3+</Superscript> and [Co(bpy)<Subscript>2</Subscript>(amtp)]<Superscript>3+</Superscript>

Two novel cobalt(III) mixed-polypyridyl complexes [Co(bpy)₂(dpta)]³⁺ and [Co(bpy)₂(amtp)]³⁺ (bpy = 2,2′-bipyridine, dpta = dipyrido-[3,2-a;2′,3′-c]-thien-[3,4-c]azine, amtp = 3-amino-1,2,4-triazino[5,6-f]-1,10-phenanthroline) have been synthesized and characterized. The interaction of Co^III complexes with calf thymus DNA was investigated by spectroscopic and viscosity measurements. Results suggest that the two complexes bind to DNA via an intercalative mode. Moreover, Co^III complexes have been found to promote the photocleavage of plasmid DNA pBR322 under irradiation at 365 nm. The mechanism studies reveal that hydroxyl radical (OH^•) is likely to be the reactive species responsible for the cleavage of plasmid DNA by [Co(bpy)₂(dpta)]³⁺ and superoxide anion radical (O ₂ ^•− ) acts as the key role in the cleavage reaction of plasmid DNA by [Co(bpy)₂(amtp)]³⁺.     

Co<Superscript>II</Superscript> and Rh<Superscript>I</Superscript> complexes with <Emphasis Type="Italic">C</Emphasis><Subscript>2</Subscript>-symmetric chiral diamines of the dioxolane series

The reaction of di-μ-chlorobis(1,5-cyclooctadiene)dirhodium with (4S, 5S)-2,2-dimethyl-4,5-bis(methylaminomethyl)-1,3-dioxolane (1) gave the complex [Rh(cod)(1)]Cl (cod is 1,5-cyclooctadiene). The composition of the complexes CoCl₂ · L₂ and [Rh(cod)(L₂)]X (L₂ = 1, (4S,5S)-2,2-dimethyl-4,5-bis(aminomethyl)-1,3-dioxolane, and (4S, 5S)-2,2-dimethyl-4,5-bis(dimethylaminomethyl)-1,3-dioxolane; X = Cl, TfO) was studied using IR and ¹H NMR spectroscopy. In the Rh^I cyclooctadienediamine complexes, the diene molecule forms a stronger bond with the metal atom than that in the cyclooctadienediphosphine analogs. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 10, pp. 2270–2274, October, 2005.     

Interconversion of stannylium ions in the C<Subscript>4</Subscript>H<Subscript>11</Subscript>Sn<Superscript>+</Superscript> system

B3LYP method with the LANL2DZ basis for tin and aug-cc-pVDZ basis for carbon and hydrogen were used to obtain the equilibrium geometry of the main (with a positive charge on the tin) isomers in the C₄H₁₁Sn⁺ system and the transition states at their interconversion. As in the case of silicon and germanium, the cations of lighter elements of the 14th group, the most stable isomer is shown to be the tertiary ion, however, the energy of its complexes with ethane and propane is higher only by several kJ mol⁻¹. Nevertheless, the formation of these complexes from the tertiary ion requires overcoming a rather high barrier (293 and 272 kJ mol⁻¹, respectively). The barrier for isomerization of the secondary ion in the ethane complex is somewhat lower (222 kJ mol⁻¹), but still is significantly greater than the energy gained at the appearance of the nucleogenic ion. The most probable transformation pathways of the nucleogenic stannylium ions are the formation of complexes with ethylene, which requires overcoming barriers of 130 and 117 kJ mol⁻¹ for the tertiary and secondary ions, respectively.     

Pyridyl derivatives provide new pathways for labeling protein with fac-[<Superscript>188</Superscript>Re(CO)<Subscript>3</Subscript>(H<Subscript>2</Subscript>O)<Subscript>3</Subscript>]<Superscript>+</Superscript>

The purpose of this work was to indirect label IgG with fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺ and to check the radiochemical behavior of the labeled product. The compound of (bis(2-pyridylmethyl)-amino)-acetic acid (L²H) was synthesized and labeled with fac-[¹⁸⁸Re(CO)₃(H₂O)₃]⁺. The labeling yield of ¹⁸⁸Re(CO)₃–L²H was more than 90%. The effects of protein concentration, reaction time, pH and reaction temperature of labeling of IgG with ¹⁸⁸Re(CO)₃–L²H were investigated. The conjugation conditions were optimized. The labeled product was analyzed by size exclusion HPLC and TLC. The stability of ¹⁸⁸Re(CO)₃–L²H–IgG in vitro was high. The results of this study may be useful for [¹⁸⁸Re(CO)₃(H₂O)₃]⁺ labeling of protein for radioimmunotherapy.     

Mononuclear manganese(II) and manganese(III) complexes of N<Subscript>2</Subscript>O donors involving amine and phenolate ligands: absorption spectra,electrochemistry and crystal structure of [Mn(L<Subscript>3</Subscript>)<Subscript>2</Subscript>](ClO<Subscript>4</Subscript>)

A number of mononuclear manganese(II) and manganese(III) complexes have been synthesized from tridentate N₂O aminophenol ligands (HL₁–HL₅) formed by reduction of corresponding Schiff bases with NaBH₄. Three types of tridentate N₂O aminophenols have been prepared by reducing with NaBH₄which are (a) Schiff bases obtained by bromo salicylaldehyde reaction with N,N-dimethyl/N,N-diethyl ethylene diamine (HL₁, HL₂), (b) Schiff bases obtained by condensing salicylaldehyde/bromo salicylaldehyde and picolyl amine (HL₃, HL₄), (c) pyridine-2-aldehyde and 2-aminophenol (HL₅). All the manganese complexes have been prepared by direct addition of manganese perchlorate to the corresponding ligands and were characterized by the combination of i.r., u.v.–vis spectroscopy, magnetic moments and electrochemical studies. The u.v.–vis spectra of all of the manganese(III) complexes show two weak d–d transitions in the 630–520 nm region, which support a distorted octahedral geometry. The electron transfer properties of all of the manganese(III) complexes (1–4 and 6) exhibit mostly similar characteristics consisting two redox couples corresponding to the Mn^III → Mn^II reductions and Mn^III → Mn^IV oxidations. The electronic effect on the potential has also been studied by changing different substituents in the ligands. In all cases, an electron-donating group stabilizes the higher oxidation state and electron withdrawing group prefers the lower oxidation state. The cyclic voltammogram of [Mn^II(L₅)₂] shows an irreversible oxidation Mn^II → Mn^III at −0.88 V, followed by another quasi-reversible oxidation Mn^III → Mn^IV at +0.48 V. The manganese(III) complex (3) [Mn(L₃)₂]ClO₄has been characterized by X-ray crystallography.     

Synthesis and transformations of metallacycles 33. The first example of cycloalumination of cyclonona-1,2-diene with Et<Subscript>3</Subscript>Al and EtAlCl<Subscript>2</Subscript> in the presence of Cp<Subscript>2</Subscript>ZrCl<Subscript>2</Subscript>

Catalytic cycloalumination of cyclonona-1,2-diene upon treatment with Et₃Al and EtAlCl₂ in the presence of Cp₂ZrCl₂, leading to 10-ethyl-10-aluminabicyclo[7.3.0^1,9]dodec-8-ene (1) and 11-ethyl-11-aluminatricyclo[10.7.0^1,12.0^2,10]nonadeca-9,12-diene, respectively, was accomplished in high yields. A possibility for the selective transformation of compound 1 to 1-allyl-9-(pent-4-enyl)cyclonon-1-ene and 10-hydroxybicyclo[7.3.0^1,9]dodec-8-ene in one preparative step was demonstrated. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 11, pp. 2156–2159, November, 2007.     

Initiation of ethylene polymerization on organoelement cations L<Subscript>2</Subscript>MMe<Superscript>+</Superscript> (M = Ge,Sn) with intramolecular coordination bonds: a theoretical study

The initiation of ethylene polymerization on L₂MMe⁺ cations (M = Ge, Sn; L = alkoxy, alkyl, phenoxyiminate, β-diketonate) was studied by the PBE/TZ2P density functional method. It was found that ethylene insertion into the M—C bond of the L₂MMe⁺ cations is energetically favorable (ΔG ⁰ = −7.6—−13.6 kcal mol⁻¹). The calculated energy barriers to reactions lie in a wide range 39.8 to 75.6 kcal mol⁻¹. The lowest energy barriers were obtained for tin cations bearing hexa- and heptafluoroacetylacetonate substituents. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 7, pp. 1338–1347, July, 2008.     

Structures and bonding of the complexes [M(η<Superscript>5</Superscript>-E<Subscript>5</Subscript>)] and [M(η<Superscript>5</Superscript>-E<Subscript>5</Subscript>)<Subscript>2</Subscript>] (M = Sc,Y, E = N,P): a DFT study

The mono- and bisligands complexes formed by rare earth cation (Sc, Y) with pentazolato anion or cyclo-P₅⁻ anion, the all-nitrogen counterparts of metallocenes or the all-phosphorus counterparts of metallocenes, have been studied at hybrid basis sets level with the DFT method. The geometric parameters, binding energy and the charge distributions of these complexes were characterized. And their stable orders were obtained. Monoligand complexes incline to become bisligands complexes due to their destabilization. The charge transferring between ligand and metallic cation has affinity with the stability of complex. The possibility of forming stable [M(η ⁵-E₅)₂] (M = Sc, Y, E = N, P) complexes is predicted and they are viable synthetic targets theoretically, especially Sc(η ⁵-N₅)₂.     

Reactivity of triangular oxalate cluster complexes [M<Subscript>3</Subscript>Q<Subscript>7</Subscript>(C<Subscript>2</Subscript>O<Subscript>4</Subscript>)<Subscript>3</Subscript>]<Superscript>2−</Superscript> (M = Mo or W; Q = S or Se)

The reactions of the oxalate complexes [M₃Q₇(C₂O₄)₃]²⁻ (M = Mo or W; Q = S or Se) with Mn^II, Co^II, Ni^II, and Cu^II aqua and ethylenediamine complexes in aqueous and aqueous ethanolic solutions were studied. The previously unknown heterometallic complexes [Mo₃Se₇(C₂O₄)₃Ni(H₂O)₅]·3.5H₂O (1) and K₃{[Cu(en)₂H₂O]([Mo₃S₇(ox)₃]₂Br)}·5.5H₂O (2) were synthesized. In these complexes, the oxalate clusters serve as monodentate ligands. The K(H₂en)₂[W₃S₇(C₂O₄)₃]₂Br·4H₂O salt (3) was isolated from solutions containing Co^II, Ni^II, or Cu^II aqua complexes and ethylenediamine. The reaction of [Mo₃Se₇(C₂O₄)₃]²⁻ with HBr produced the bromide complex [Mo₃Se₇Br₆]²⁻, which was isolated as (Bu₄N)₂[Mo₃Se₇Br₆] (4). Complexes 1–3 were characterized by X-ray diffraction, IR spectra, and elemental analysis. The formation of 4 was detected by electrospray mass spectrometry. Dedicated to Academician G. A. Abakumov on the occasion of his 70th birthday. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 9, pp. 1645–1649, September, 2007.     

PuPO<Subscript>4</Subscript>(cr,hyd.) Solubility Product and Pu<Superscript>3+</Superscript> Complexes with Phosphate and Ethylenediaminetetraacetic Acid

To determine the solubility product of PuPO₄(cr, hyd.) and the complexation constants of Pu(III) with phosphate and EDTA, the solubility of PuPO₄(cr, hyd.) was investigated as a function of: (1) time and pH (varied from 1.0 to 12.0), and at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration; (2) NaH₂PO₄ concentrations varying from 0.0001 mol⋅L⁻¹ to 1.0 mol⋅L⁻¹ and at a fixed pH of 2.5; (3) time and pH (varied from 1.3 to 13.0) at fixed concentrations of 0.00032 mol⋅L⁻¹ phosphate and 0.0004 mol⋅L⁻¹ or 0.002 mol⋅L⁻¹ Na₂H₂EDTA; and (4) Na₂H₂EDTA concentrations varying from 0.00005 mol⋅L⁻¹ to 0.0256 mol⋅L⁻¹ at a fixed 0.00032 mol⋅L⁻¹ phosphate concentration and at pH values of approximately 3.5, 10.6, and 12.6. A combination of solvent extraction and spectrophotometric techniques confirmed that the use of hydroquinone and Na₂S₂O₄ helped maintain the Pu as Pu(III). The solubility data were interpreted using the Pitzer and SIT models, and both provided similar values for the solubility product of PuPO₄(cr, hyd.) and for the formation constant of PuEDTA⁻. The log ₁₀ of the solubility product of PuPO₄(cr, hyd.) [PuPO₄(cr, hyd.) \rightleftarrows\rightleftarrows Pu³⁺+PO₄^3-\mathrm{Pu}^{3+}+\mathrm{PO}_{4}^{3-}] was determined to be −(24.42±0.38). Pitzer modeling showed that phosphate interactions with Pu³⁺ were extremely weak and did not require any phosphate complexes [e.g., PuPO₄(aq), PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+}, Pu(H₂PO₄)₂⁺\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{2}^{+}, Pu(H₂PO₄)₃(aq), and Pu(H₂PO₄)₄^-\mathrm{Pu(H}_{2}\mathrm{PO}_{4})_{4}^{-}] as proposed in existing literature, to explain the experimental solubility data. SIT modeling, however, required the inclusion of PuH₂PO₄²⁺\mathrm{PuH}_{2}\mathrm{PO}_{4}^{2+} to explain the data in high NaH₂PO₄ concentrations; this illustrates the differences one can expect when using these two different chemical models to interpret the data. Of the Pu(III)-EDTA species, only PuEDTA⁻ was needed to interpret the experimental data over a large range of pH values (1.3–12.9) and EDTA concentrations (0.00005–0.256 mol⋅L⁻¹). Calculations based on density functional theory support the existence of PuEDTA⁻ (with prospective stoichiometry as Pu(OH₂)₃EDTA⁻) as the chemically and structurally stable species. The log ₁₀ value of the complexation constant for the formation of PuEDTA⁻ [ Pu³⁺+EDTA^4-\rightleftarrows PuEDTA^-\mathrm{Pu}^{3+}+\mathrm{EDTA}^{4-}\rightleftarrows \mathrm{PuEDTA}^{-}] determined in this study is −20.15±0.59. The data also showed that PuHEDTA(aq), Pu(EDTA)₄^5-\mathrm{Pu(EDTA)}_{4}^{5-}, Pu(EDTA)(HEDTA)⁴⁻, Pu(EDTA)(H₂EDTA)³⁻, and Pu(EDTA)(H₃EDTA)²⁻, although reported in the literature, have no region of dominance in the experimental range of variables investigated in this study.     

Carbon black oxidation mechanism in loose and tight contacts with Al<Subscript>2</Subscript>O<Subscript>3</Subscript> and CeO<Subscript>2</Subscript> catalysts

The catalytic combustion of carbon black was investigated in the presence of CeO₂ and Al₂O₃. The influence of contact type between carbon particles and these oxides was examined by thermal analysis, the BET specific area, and EPR spectroscopy. For tight contact carbon black-catalyst mixtures, a new paramagnetic species is observed and can be considered as a fingerprint of the contact between the two solids. These new paramagnetic species increase the reactivity of the catalytic reaction of carbon black (CB) combustion and take part in the oxidation mechanism of CB. Published in Russian in Kinetika i Kataliz, 2007, Vol. 48, No. 6, pp. 899–904. This article was submitted by the authors in English.     

Oxidative dehydrogenation of N-(2-hydroxy-3,5-R<Superscript>1</Superscript>,R<Superscript>2</Superscript>-benzyl)-4-aminoantipyrines in the complexation reaction

Reactions of N-(2-hydroxy-3,5-R¹,R²-benzyl)-4-aminoantipyrines with copper acetate in ethanol gave complexes with Schiff bases (SBs) rather than the expected complexes with reduced SBs; i.e., the starting ligands undergo oxidative dehydrogenation during the complexation reaction. The corresponding complexes with reduced SBs were obtained from sodium salts of the ligands and cupric sulfate in aqueous solutions. Kinetic measurements showed that oxidative dehydrogenation occurs in the heteroleptic complexes Cu(L ⁱ )(CH₃COO)(X) (L ⁱ H are derivatives of N-(2-hydroxy-3,5-R¹,R²-benzyl)-4-aminoantipyrines; i = 6–10; X = H₂O, CH₃OH, CH₃CH₂OH) but does not occur in the complexes CH₃OH, CH₃CH₂OH. The absence of oxidative dehydrogenation of the ligands in Cu(L ⁱ )₂ · H₂O can be explained by the octahedral environment of the Cu²⁺ ion and, accordingly, the absence of the coordination site for molecular oxygen. The molecular structures of two Cu(II) complexes with SBs were determined by X-ray diffraction.     

(Tetramethylcyclobutadiene)cobalt complexes 7. Mono- and dinuclear arene complexes containing the [(C<Subscript>4</Subscript>Me<Subscript>4</Subscript>)Co]<Superscript>+</Superscript> fragment

The mononuclear arene complexes [Cb*Co(arene)]⁺ (3a–g; Cb* = C₄Me₄; arene is biphenyl (a), diphenylmethane (b), 1,2-diphenylethane (c), diphenyl ether (d), p-terphenyl (e), 1,2-dimesitylethane (f), or 1,3-dimesitylpropane (g)) were synthesized by the reactions of arenes either with the benzene complex [Cb*Co(C₆H₆)]⁺ (1) under visible light irradiation or with the acetonitrile derivative [Cb*Co(MeCN)₃]⁺ (2) in refluxing THF. The reactions of 2 with 1,2-diphenyle-thane, 1,3-dimesitylpropane, and p-terphenyl in a ratio of 2: 1 afforded the dinuclear complexes [Cb*Co(μ-η:η-arene)CoCb*]²⁺ (4c,e,g). The stability of the dinuclear arene complexes was estimated by DFT calculations. The structures of the complexes [3a]PF₆ and [3e]PF₆ ere established by X-ray diffraction. For Part 6, see Ref. 1. Published in Russian in Izvestiya Akademii Nauk. Seriya Khimicheskaya, No. 3, pp. 535–539, March, 2008.     

Electronic spectra of C<Subscript>6</Subscript>H<Superscript>+</Superscript> and C<Subscript>6</Subscript>H<Stack><Subscript>3</Subscript><Superscript>+</Superscript></Stack> in the gas phase

Measurement of the ³Π-³Π transition of C₆H⁺ in the gas phase near 19486 cm⁻¹ is reported. The experiment was carried out with a supersonic slit-jet expansion discharge using cavity ringdown absorption spectroscopy. Partly resolved P lines and observation of band heads permitted a rotational contour fit. Spectroscopic constants in the ground and excited-state were determined. The density of ions being sampled is merely 2×10⁸ cm⁻³. Broadening of the spectral lines indicates the excited-state lifetime to be ≈100 ps. The electronic transition of HC₆H₂⁺ at 26402 cm⁻¹ assumed to be ¹A₁-X¹A₁ in C_2v symmetry could not be rotationally resolved.     

Second Dissociation Constant of H<Subscript>2</Subscript>Te and the Absorption Spectra of HTe<Superscript>–</Superscript>, Te<Superscript>2–</Superscript> and Te<Subscript>2</Subscript><Superscript>2–</Superscript> in Aqueous Solution

We have measured the second acid dissociation constant, K _2a , at several ionic strengths for hydrogen telluride (H₂Te) using the Charge Transfer to Solvent (CTTS) uv spectra of its anions HTe⁻ and Te²⁻. Since it is produced in our solutions, we have also determined the spectra of Te₂ ²⁻ both in the uv and in the visible regions. At 25 ^∘C, K _2a = (1.28 ± 0.02) × 10⁻¹² by extrapolation to zero ionic strength. Its value at an ionic strength equal to 0.5 mol.dm^-3 was estimated to be (8.7 ± 0.2) × 10⁻¹². The solution thermodynamics of these species are also discussed and comparisons are made to related acids.