四方铁电体PbFe0.5Nb0.5O3精细结构的第一性原理研究

采用全电势线性缀加平面波法(FPLAPW),计算了PbFe0.5Nb0.5O3的总能量,从而确定了它的四方铁电稳态结构,即B位离子(Fe和Nb)在四方铁电相的平衡构型.计算结果表明,Fe相对于氧八面体沿[001]方向的位移为0.022nm,而Nb的偏心位移为0.0020nm,其中铁电非稳性主要归因于前者 关键词： 铁电体 密度泛函理论 平面波法     

SrHfO3和SrTiO3光学特性的第一性原理研究

用全电势线性缀加平面波法(FLAPW)计算了SrTiO₃和SrHfO₃的光学特性，即介电函数虚部ε₂(ω)、光学吸收系数I(ω)和反射率R(ω).对它们光学特性进行了对比分析，给出了它们光学特性的差别，并进行了解释.计算的SrTiO₃光学谱分别在4.4，7.4，8.3和23.6eV处出现峰值，且其在4.4eV处的峰值比较高而尖.计算结果与实验值符合得很好. 关键词： 平面波法计算 光学常量和参数 铁电体     

Rb2TeW3O12电子结构及光学性质的第一性原理研究

采用平面波超软赝势法对Rb2TeW3O12基态的几何结构、能带结构和光学特性等进行了系统的研究.几何结构研究不仅对基态平衡时的几何参量进行了优化计算，还对内部坐 标做了优化，其结果和实验测量值符合得很好.电子结构的研究表明，Rb2TeW3O12 属于宽禁带直接带隙半导体，禁带宽度为223eV，W 5d和O 2p轨道之间强烈杂化形成W— O共价键.计算了光学性质，给出了Rb2TeW3O12的介电函数实部ε1、虚部ε 2及相关光学参量，理论计算的静态介电常数为529 关键词： Rb2TeW3O12 电子结构 介电函数 密度泛函理论     

SrHfO3和SrTiO3光学特性的第一性原理研究

用全电势线性缀加平面波法(FLAPW)计算了SrTiO3和SrHfO3的光学特性,即介电函数虚部ε2(ω)、光学吸收系数I(ω)和反射率R(ω).对它们光学特性进行了对比分析,给出了它们光学特性的差别,并进行了解释.计算的SrTiO3光学谱分别在4.4,7.4,8.3和23.6eV处出现峰值,且其在4.4eV处的峰值比较高而尖.计算结果与实验值符合得很好.     

Na0.25K0.25Bi0.5TiO3无铅压电陶瓷的介电特性研究

用固相反应法制备了Na_0.25K_0.25Bi_0.5TiO₃ (NKBT50)陶瓷，研究了该陶瓷在室温至400℃温度范围内的介电性能.发现该陶瓷的介电温谱与烧结气氛、极化状态有关.在空气中烧结的未极化样品在70℃附近存在介电和损耗峰，而极化后及在氧气氛中烧结的样品并不存在该介电、损耗峰.分析认为70℃的介电和损耗峰与氧空位形成的缺陷偶极子的极化弛豫有关.热激电流显示，陶瓷的去极化温度为225℃，与此相对应的介电、损耗峰也 关键词： 介电性能 氧空位 极化弛豫 钛酸铋钠钾     

0.5NdAlO3-0.5CaTiO3电子结构及光学性质的第一性原理计算

采用基于第一性原理密度泛函理论的平面波赝势方法,对0.5NdAlO₃-0.5CaTiO₃晶体进行结构优化,并对其能带结构,态密度和光学性质进行了理论计算.结构优化后晶格参数与实验数据相符合,误差小于1%;能带计算结果表明0.5NdAlO₃-0.5CaTiO₃为间接带隙,带隙值为0.52eV;费米面附近的能带由Nd-4f,O-2p,Nd-4p,Al-3p,Ti-4d层的电子态密度确定.同时也计算了该结构的介电函数,反射率和复折射率等光学性质.     

N掺杂锐钛矿TiO2光学性能的第一性原理研究

用平面波赝势方法(PWP)计算了N掺杂锐钛矿型TiO₂前后的光学特性,即介电函数虚部ε₂(ω)，光学吸收系数I(ω)和反射率R(ω). 并从能带结构上解释了为什么掺N后锐钛矿型TiO₂的光学谱在2.93，3.56和3.97eV处相对掺杂前会出现3个峰值的原因. 从光谱图上分析得出，掺杂后TiO₂要发生红移现象，实验现象证实了这一结果. 关键词： N掺杂 2')" href="#">锐钛矿型TiO₂ 光学性能 第一性原理     

稀土La掺杂CrSi_2电子结构与光学性质的第一性原理研究

基于密度泛函理论的第一性原理赝势平面波方法,对稀土La掺杂CrSi2的几何结构,电子结构和光学性质进行了计算与分析.结果表明,La掺杂后,CrSi2的晶格常数a,b和c均增大,晶格体积增大.La掺杂导致费米面进入价带,带隙明显变窄仅为0.07eV;在费米面附近,La原子的5d层电子态密度只占总态密度很小的一部分,而总态密度仍然由Si的3p层和Cr的3d层电子的分波态密度决定;La掺杂后CrSi2的静态介电常数ε1(0)由28.98增大为91.69,ε2(ω)的两个介电峰均向低能方向偏移且增强,光学吸收边向低能方向移动,吸收峰减小.计算结果为CrSi2材料掺杂改性的实验研究提供了理论依据.     

稀土La掺杂CrSi2电子结构与光学性质的第一性原理研究

基于密度泛函理论的第一性原理赝势平面波方法, 对稀土La掺杂CrSi2的几何结构, 电子结构和光学性质进行了计算与分析. 结果表明, La掺杂后, CrSi2的晶格常数a, b 和c均增大, 晶格体积增大. La掺杂导致费米面进入价带, 带隙明显变窄仅为0.07eV; 在费米面附近, La原子的5d层电子态密度只占总态密度很小的一部分, 而总态密度仍然由Si的3p层和Cr的3d层电子的分波态密度决定; La掺杂后CrSi2的静态介电常数ε1(0)由28.98增大为91.69, ε2(ω)的两个介电峰均向低能方向偏移且增强, 光学吸收边向低能方向移动, 吸收峰减小. 计算结果为CrSi2材料掺杂改性的实验研究提供了理论依据.     

相界附近Pb(Zn1/3Nb2/3)O3-PbZrO3-PbTiO3固溶体的弛豫相变研究

利用常规电子陶瓷工艺在相界附近合成得到纯钙钛矿相的Pb(Zn1/3Nb2/3)O3PbZrO3PbTiO3(PZNPZT)三元系固溶体,其相界位于Zr/Ti比37/33处.在实验中发现和证实了相界附近PZNPZT三元系固溶体存在铁电弛豫顺电相变.在极化后Zr/Ti比为37/33及39/31PZNPZT样品的介电温度谱观测到菱方四方相相变,认为PZNPZT固溶体相界是向富Zr区弯曲. 关键词：     

Optical properties of cubic and tetragonal KTa0.5Nb0.5O3 by density functional theory

Using density functional methods, optical properties of KTa_0.5Nb_0.5O₃ (KTN) are investigated. The imaginary part of dielectric function ε₂(ω), the optical absorption coefficient I(ω) and the reflectivity R(ω) of KTN in the cubic (paraelectric) and tetragonal (ferroelectric) phases are calculated. The origin of the different behavior of the optical spectra between the two phases is discussed.     

First-Principles Investigations of Pb_(0.5)Ba_(0.5)TiO_3 Alloys Based on Structure Predictions

Crystal structure predictions of Pb_(0.5)Ba_(0.5)TiO_3 alloys under different pressures are performed based on the particle swarming optimization algorithm.The predicted stable ground-state and high-pressure phases are tetragonal ferroelectric(I4mm) and cubic para-electric(Fm3m),respectively,whose structural details have not been reported.The pressure-induced colossal enhancements in piezoelectric response are associated with the mechanical and dynamical instabilities instead of polarization rotation.The band gap of the tetragonal phase is indirect and that of the cubic phase is always direct.As pressure increases,the alloy displays the similar band-gap behaviors to PbTiO_3,while different from BaTiO_3,which is attributed to the different orbital contributions to the valence bands.Our calculated results are in good agreement with the available data.     

Bi0.5Ba0.5FeO3 陶瓷的电性能及阻抗分析

以传统的固相反应法制备了Bi_0.5Ba_0.5FeO₃陶瓷,并采用X射线衍射仪、扫描电子显微镜、直流阻温测试仪和交流阻抗分析仪测试了Bi_0.5Ba_0.5FeO₃陶瓷的微结构和电性能.分析结果表明:Bi_0.5Ba_0.5FeO₃陶瓷具有立方钙钛矿结构,颗粒尺寸约1.0 μm;在16—280 ℃范围内,Bi_0.5Ba_0.5FeO₃陶瓷表现出明显的负温度系数热敏效应,其热敏常数、活化能分别为6490 K及0.558 eV;介电温谱揭示,在280 ℃下Bi_0.5Ba_0.5FeO₃陶瓷材料没有出现相变行为.对于交流阻抗谱,采用3个串联的RQ(R与Q为并联)等效部件来拟合分析,拟合结果表明拟合数据与实验数据高度匹配,且这3个等效部件分别代表晶界、晶粒和晶壳的贡献.3个部件中,晶粒对陶瓷电阻阻值的影响最大,晶壳贡献次之,晶界最小,且3个部件电阻值都显示出负温度系数效应.在25—115 ℃范围内,电学模量虚部峰频与阻抗虚部峰频始终不匹配,意味着Bi_0.5Ba_0.5FeO₃陶瓷体内部一直表现出局域导电机理. 关键词： 0.5Ba_0.5FeO₃陶瓷')" href="#">Bi_0.5Ba_0.5FeO₃陶瓷 电性能 阻抗分析     

LaFeAsO单晶各向异性光学性质的第一性原理研究

使用密度泛函第一性原理研究了高温超导体LaFeAsO各向异性的光学性质。在描述光学性质的计算原理和计算方法的基础上, 计算了LaFeAsO的态密度、光电导谱、反射谱以及电子能量损失谱。光电导谱中, x方向与z方向有着很大差别, 在沿x方向的第一个带间吸收峰出现在1.3 eV处, 沿z方向出现在1.5 eV处; 在反射谱与电子能量损失谱中, x方向与z方向的特征峰位置在能量较高处都是相互吻合的。分析认为, 主要是电子在Fe原子之间的各个态间的跃迁所引起。考虑到温度效应对其光学性质的影响, 在计算光学矩阵元时, 加入Lorentz展宽δ=0.10 eV。本文的研究结果, 可为实验制备以及材料性质的研究提供有价值的参考。     

Photoluminescence of polycrystalline CuIn0.5Ga0.5Te2 thin films grown by flash evaporation

Polycrystalline CuIn_0.5Ga_0.5Te₂ films were deposited by flash evaporation from ingot prepared by reacting, in stoichiometric proportions, high purity Cu, In, Ga and Te elements in vacuum sealed quartz. The as-obtained films were characterized by X – ray diffraction (XRD), transmission electron microscopy (TEM) combined with energy dispersive spectroscopy (EDS). XRD and TEM results showed that the layer has a chalcopyrite-type structure, predominantly oriented along (112) planes, with lattice parameters a?=?0.61?nm and c?=?1.22?nm. The optical properties in the near - infrared and visible range 600–2400?nm have been studied. The analysis of absorption coefficient yielded an energy gap value of 1.27?eV. Photoluminescence analysis of as-grown sample shows two main emission peaks located at 0.87 and 1.19?eV at 4?K.     

0.5PZN-0.5PZT压电陶瓷拉曼散射研究

PZT基多元系压电陶瓷在三方相含量与四方相含量相等的准同型相界处(MPB)具有极为优异的压电性能。文章采用拉曼散射方法研究了0.5PZN-0.5PZT陶瓷体系中三方-四方相共存与弥散相变现象。研究发现,与纯PZT相比,0.5PZN-0.5PZT体系拉曼谱呈明显宽化特征,表明体系弛豫性较强,依据介温谱计算出弥散因子γ高达1.71。通过对拉曼谱峰进行Gauss函数拟合,定量计算三方相R₁模式与四方相E(3TO)和A₁(3TO)模式相对强度,以及四方相E(4LO)和A₁(3LO)模式与三方相R_h模式相对强度,结果表明0.5PZN-0.5PZT体系三方相与四方相含量相等,组成位于准同型相界,该结果得到XRD相分析验证。电学测量表明0.5PZN-0.5PZT陶瓷压电性能优异：k_p=0.66, d₃₃=425 pC/N,适宜作为压电致动器材料使用。     

First-principles study of the optical properties of PbTiO<Subscript>3</Subscript>

The optical properties of PbTiO₃ were studied from first principles using the density functional theory. The dielectric functions and optical constants are calculated using the full potential–linearized augmented plane wave (FP-LAPW) method with the generalized gradient approximation (GGA). The theoretical calculated optical properties and energy loss (EEL) spectrum yield a static refractive index of 2.83 and a plasmon energy of 23.1 eV for cubic phase. The effective electron number at low energy saturates near 20 eV with the value of 18.1 for the effective electron number. In the tetragonal phase the static refractive index decreases to 2.59 and yields a plasmon energy of 22.7 eV.     

The electronic structure and optical and magnetooptical properties of the CaCo<Subscript>2</Subscript> compound synthesized at a high pressure: Experiment and theory

The optical properties (the real ε₁ and imaginary ε₂ permittivity parts, optical conductivity σ, and reflectivity R) of the new ferromagnetic compound CaCo₂ in the Laves cubic phase (C15) synthesized at a pressure of 8.0 GPa were studied over the spectral range ?ω = 0.2–9 eV. The field and spectral (?ω = 0.5–4.2 eV) dependences of the equatorial Kerr effect were determined. The electronic structure and optical characteristics of CaCo₂ were calculated using the electron density functional theory by the linearized augmented-plane-wave method. The main band structure parameters of the compound were determined. The experimental and theoretical σ(ω) and R(ω) dependences were in satisfactory agreement with each other. The formation of the main absorption bands was found to be caused by the (p,d → d,p)-type electronic transitions related to the cobalt and calcium atoms. The exchange splitting of the 3d band of CaCo₂ was estimated, 2Δ_exc ～ (1–1.3) eV.