Superstructure in the Metastable Intermediate‐Phase Li2/3FePO4 Accelerating the Lithium Battery Cathode Reaction

LiFePO₄ is an important cathode material for lithium‐ion batteries. Regardless of the biphasic reaction between the insulating end members, Li_xFePO₄, x≈0 and x≈1, optimization of the nanostructured architecture has substantially improved the power density of positive LiFePO₄ electrode. The charge transport that occurs in the interphase region across the biphasic boundary is the primary stage of solid‐state electrochemical reactions in which the Li concentrations and the valence state of Fe deviate significantly from the equilibrium end members. Complex interactions among Li ions and charges at the Fe sites have made understanding stability and transport properties of the intermediate domains difficult. Long‐range ordering at metastable intermediate eutectic composition of Li_2/3FePO₄ has now been discovered and its superstructure determined, which reflected predominant polaron crystallization at the Fe sites followed by Li⁺ redistribution to optimize the Li? Fe interactions.     

Determination of the Lamb-Mössbauer factors of LiFePO4 and FePO4 for electrochemical in situ and operando measurements in Li-ion batteries

⁵⁷Fe Mössbauer spectroscopy is a powerful tool to investigate redox reactions during in electrochemical lithium insertion/extraction processes. Electrochemical oxidation of LiFe^IIPO₄ (triphylite) in Li-ion batteries results in Fe^IIIPO₄ (heterosite). LiFePO₄ was synthesized by solid state reaction at 800 °C under Ar flow from Li₂CO₃, FeC₂O₄·2H₂O and NH₄H₂PO₄ precursors in stoichiometric composition. FePO₄ was prepared from chemical oxidation of LiFePO₄ using bromine as oxidative agent. For both materials a complete ⁵⁷Fe Mössbauer study as a function of the temperature has been carried out. The Debye temperatures are found to be θ_M=336 K for LiFePO₄ and θ_M=359 K for FePO₄, leading to Lamb-Mössbauer factors f_300 K=0.73 and 0.77, respectively. These data will be useful for a precise estimation of the relative amounts of each species in a mixture.     

Li<Subscript>0.99</Subscript>Ti<Subscript>0.01</Subscript>FePO<Subscript>4</Subscript>/C composite as cathode material for lithium ion battery

Three kinds of LiFePO₄ materials, mixed with carbon (as LiFePO₄/C), doped with Ti (as Li_0.99Ti_0.01FePO₄), and treated both ways (as Li_0.99Ti_0.01FePO₄/C composite), were synthesized via ball milling by solid-state reaction method. The crystal structure and electrochemical behavior of the materials were investigated using X-ray diffraction, SEM, TEM, cyclic voltammetry, and charge/discharge cycle measurements. It was found that the electrochemical behavior of LiFePO₄ could be increased by carbon coating and Ti-doping methods. Among the materials, Li_0.99Ti_0.01FePO₄/C composite presents the best electrochemical behavior, with an initial discharge capacity of 154.5 mAh/g at a discharge rate of 0.2 C, and long charge/discharge cycle life. After 120 cycles, its capacity remains at 92% of the initial capacity. The Li_0.99Ti_0.01FePO₄/C composite developed here can be used as the cathode material for lithium ion batteries.     

Structural, spectroscopic and magnetic investigation of the LiFe1−xMnxPO4 (x=0-0.18) solid solution

Different solid state and sol-gel preparations of undoped and Mn substituted cathode material LiFePO₄ are investigated. Li₃PO₄, Fe₂P₂O₇ and Li₄P₂O₇ are detected and quantified by XRPD only in solid state synthesis. In addition, micro-Raman spectra reveal low amount of different iron oxides clusters. EPR data, combined with the results of magnetization measurements, evidence signals from Fe³⁺ ions in maghemite nanoclusters, and in Li₃Fe₂(PO₄)₃. The sol-gel synthesis, showing the lowest amount of impurity phases, seems the most suitable to obtain a promising cathode material. The structural refinement gives new insights into the cation distribution of the Mn doped triphylite structure: (i) about 85% of Mn²⁺ ions substitutes Fe²⁺, the remaining 15% being located on the Li site, thus suggesting a structural disorder also confirmed by EPR and micro-Raman results; (ii) Mn ions on the Li site are responsible for the observed slight cell volume expansion.     

Effect of Li excess content and Ti dopants on electrochemical properties of LiFePO<Subscript>4</Subscript> prepared by thermal reduction method

Carbon coated Li_{1 + x} FePO₄ (x = 0, 0.01, 0.02, 0.03, 0.04) and doped compositions Li_1.03Fe_0.99Ti_0.01PO₄ have been synthesized by thermal reduction method in this paper. The results showed that increasing the content in Li_{1 + x} FePO₄ result in better electrochemical properties and cyclic performances until x = 0.03, which had similar change law with the particle size of samples; and the initial discharge capacity and cycle life of Li_1.03Fe_0.9Ti_0.01PO₄ was better than other samples under 1 C rate. When the Li_1.03Fe_0.99Ti_0.01PO₄/C sample cycled before 60 times, this sample exhibited a trend of increased capacity, and reached the highest discharging rate capacity of 156 mA h g⁻¹ at 60 cycles. The electrochemical performances of LiFePO₄ compositions synthesized by thermal reduction method, to some extent, can be improved by Li excess content and Ti doping.     

ChemInform Abstract: Structural and Electrochemical Study od a New Crystalline Hydrate Iron(III) Phosphate FePO4·H2O Obtained from LiFePO4(OH) by Ion Exchange.

FePO₄·H₂O is prepared by Li⁺/H⁺ exchange from an aqueous HNO₃ suspension of LiFePO₄(OH) at about 60 °C.     

Preparation and characterization of LiFePO<Subscript>4</Subscript> from NH<Subscript>4</Subscript>FePO<Subscript>4</Subscript>·H<Subscript>2</Subscript>O under different microwave heating conditions

Olivine-type LiFePO₄ is a very promising polyanion-type cathode material for lithium-ion batteries. In this work, LiFePO₄ with high specificity capacity is obtained from a novel precursor NH₄FePO₄·H₂O via microwave processing. The grains grow up in the duration of sintering until they reach the decomposition temperature. The apparent conductivity of the samples rises rapidly with the irradiation time and influences the electrochemical performance of the material greatly at high current density. As a result, the LiFePO₄ cathode material obtained with a sintering time of 15 min has good electrochemical performance. Between 2.5 and 4.2 V versus Li, a reversible capacity is as high as 156 mAh g⁻¹ at 0.05 C.     

X-ray diffraction and Mössbauer spectroscopy studies of LiFe0.5Ti1.5O4 – A new primitive cubic ordered spinel

LiFe_0.5Ti_1.5O₄ was synthesized by solid-state reaction carried out at 900 °C in flowing argon atmosphere, followed by rapid quenching of the reaction product to room temperature. The compound has been characterized by X-ray powder diffraction (XRD) and ⁵⁷Fe Mössbauer effect spectroscopy (MES). It crystallizes in the space group P4₃32, a = 8.4048(1) Å. Results from Rietveld structural refinement indicated 1:3 cation ordering on the octahedral sites: Li occupies the octahedral (4b) sites, Ti occupies the octahedral (12d) sites, while the tetrahedral (8c) sites have mixed (Fe/Li) occupancy. A small, about 5%, inversion of Fe on the (4b) sites has been detected. The MES data is consistent with cation distribution and oxidation state of Fe, determined from the structural data.The title compound is thermally unstable in air atmosphere. At 800 °C it transforms to a mixture of two Fe³⁺ containing phases – a face centred cubic spinel Li_(1+y)/2Fe_(5−3y)/2Ti_yO₄ and a Li_(z−1)/2Fe_(7−3z)/2Ti_zO₅ – pseudobrookite. The major product of thermal treatment at 1000 °C is a ramsdellite type lithium titanium iron(III) oxide, accompanied by traces of rutile and pseudobrookite.     

Mouvement du lithium dans deux nouvelles familles d'électrolytes solides: Les boracites Li4+xB7O12+x/2Cl et les halogénoborates de lithium vitreux

The boracites Li_4+xB₇O_12+x/2Cl and the related B₂O₃---xLi₂O---yLiCl glasses have been studied by cw and pulsed NMR between 130 and 500°K. Above 160°K the ⁷Li spectrum is composed of two lines: a broad one due to nonmobile Li⁺ ions and a narrow one due to diffusing Li⁺ with a hopping frequency greater than the dipolar frequency. The activation energy deduced from spin-lattice relaxation time measurements (T₁) is lower than that given by variation of conductivity with temperature. At low temperature T₁ disagrees with the BPP prediction (T₁ ω²_o). The diffusion process may be explained by the existence of a distribution of the local energy barriers.     

Composition and structure of acid leached LiMn2−yTiyO4 (0.2≤y≤1.5) spinels

Lithium manganese titanium spinels, LiMn_2−yTi_yO₄, (0.2≤y≤1.5) have been synthesized by solid-state reaction between TiO₂ (anatase), Li₂CO₃ and MnCO₃. Li⁺ was leached from the powdered reaction products by treatment in excess of 0.2 N HCl at 85 °C for 6 h, under reflux. The elemental composition of the acidic solution and solid residues of leaching has been determined by complexometric titration, atomic absorption spectroscopy and X-ray fluorescence analysis. Powder X-ray diffraction was used for structural characterization of the crystalline fraction of the solid residues. It has been found that the amount of Li⁺ leached from LiMn_2−yTi_yO₄ decreases monotonically with increasing y in the interval 0.2≤y≤1.0 and abruptly drops to negligibly small values for y>1.0. The content of Mn and Li in the liquid phase and of Mn and Ti in the solid (amorphous plus crystalline) residue, were related to the composition and cation distribution in the pristine compounds. A new formal chemical equation describing the process of leaching and a mechanism of the structural transformation undergone by the initial solids as a result of Li⁺ removal has been proposed.     

磷酸铁锂废料中FePO4·2H2O提取及其杂质形成机理

采用化学共沉淀方法从磷酸铁锂废料中提取FePO₄·2H₂O,并研究了回收过程中杂质形成的机理。在热力学计算基础上绘制了298和363 K时Fe-P-Li-H₂O体系的电势(φ)-pH图,结果表明当pH≤5.0时,Fe(OH)₃相可以自发地转成FePO₄·2H₂O相,从而得到高纯的FePO₄·2H₂O。但实验结果发现当溶液中铁、磷的物质的量之比(n_Fe∶n_P)为1∶1,合成pH为1.5～2.2时得到的FePO₄·2H₂O中存在Fe(OH)₃杂质,这是因为在共沉淀过程中少量Fe³⁺以Fe(OH)₃快速沉淀,而陈化时Fe(OH)₃相转化速率慢,因此FePO₄·2H₂O中含有Fe(OH)₃     

Preparation and Investigation on Lattice Distortion and Electrochemical Performances of Li0.95Na0.05FePO4/C

Na⁺ doped sample Li_0.95Na_0.05FePO₄/C was prepared through solid state method. Structure characterization shows Na⁺ is successfully introduced into the LiFePO₄ matrix. Scanning electron microscopy shows the particle size mainly ranges in 1～3 μm. X-ray diffraction Rietveld refinement demonstrates lattice distortion with an increased cell volume. As one cathode material, it has a discharge capacity of 150 mAh/g at 0.1 C rate. The material exhibits a capacity of 109 and 107 mAh/g at 5 and 7.5 C respectively. When cycled at 1 and 5 C, the material retains 84% (after 1000 cycles) and 86% (after 350 cycles) of the initial discharge capacity respectively indicating excellent structure stability and cycling perfor-mance. Na⁺doping enhances the electrochemical activity especially the cycle performance effectively.     

Li ion diffusion in Li4Ti5O12 thin film electrode prepared by PVP sol-gel method

Li₄Ti₅O₁₂ thin films for rechargeable lithium batteries were prepared by a sol-gel method with poly(vinylpyrrolidone). Interfacial properties of lithium insertion into Li₄Ti₅O₁₂ thin film were examined by cyclic voltammetry (CV), electrochemical impedance spectroscopy (EIS), and potentiostatic intermittent titration technique (PITT). Redox peaks in CV were very sharp even at a fast scan rate of 50 mV s⁻¹, indicating that Li₄Ti₅O₁₂ thin film had a fast electrochemical response, and that an apparent chemical diffusion coefficient of Li⁺ ion was estimated to be 6.8×10⁻¹¹ cm² s⁻¹ from a dependence of peak current on sweep rates. From EIS, it can be seen that Li⁺ ions become more mobile at 1.55 V vs. Li/Li⁺, corresponding to a two-phase region, and the chemical diffusion coefficients of Li⁺ ion ranged from 10⁻¹⁰ to 10⁻¹² cm² s⁻¹ at various potentials. The chemical diffusion coefficients of Li⁺ ion in Li₄Ti₅O₁₂ were also estimated from PITT. They were in a range of 10⁻¹¹-10⁻¹² cm² s⁻¹.     

Synthesis of LiFePO4 material with improved cycling performance under harsh conditions

LiFePO₄ material was synthesized at 670 °C in an Ar atmosphere using a sol–gel method. This material showed a well developed XRD pattern (orthorhombic structure, Pnma) without any peaks at 2θ = 41°, indicating the absence of FeP or metallic Fe₂P impurities. The Li/LiFePO₄ cell showed a high initial discharge capacity of more than 150 mA h/g and no capacity decrease until the 70th cycle (>99.9%). This cell also exhibits excellent cycle performance at high current densities of over 30C, without any surface treatment or carbon coating onto the LiFePO₄ particles.     

Storage Stability of LiFePO4/C in Humid‐hot Air

Storage stabilities of LiFePO₄/C composite at different conditions are investigated in terms of structural and electrochemical evolutions. The results from different aging tests indicate that moisture and temperature are the key factors that have the most profound effects on the structure homogeneity which in turn influences the electrochemical performance of LiFePO₄/C. Although the storage in a humid‐hot environment, such as saturated humidity air at 50°C, does not greatly influence the discharging capacity of LiFePO₄/C, it does reduce the initial charging capacity, thus the amount of reversible Li⁺ ions in a practical LiFePO₄/graphite cell decreases. This impact is explained by the lithium extraction during the storage, forming olivine FePO₄ and associated Li₃PO₄. Elevated storage temperature also favors the delithiation process. The degree of delithiation increases from about 6% at 50°C to 18% at 80°C. It is also found that re‐calcination at 650°C effectively resolves the problem of the structural heterogeneity of the stored LiFePO₄/C. Therefore both the initial charging capacity and coulombic efficiency of the stored sample in the first cycle revert to the original value of the fresh one.     

Study of LiFePO4 synthesized using a molten method with varying stoichiometries

The synthesis of LiFePO₄ from a melt cast of Li₂CO₃, FePO₄, and carbon precursors at 1,000 °C was recently reported. The results indicate that it could be a competitive technique for the large-scale production of LiFePO₄. This paper focuses on particle size reduction and non-stoichiometric synthesis of LiFePO₄. The particles size was reduced using a planetary mill that is available in most research laboratories where the milling time and milling media were varied to obtain the best electrochemical results. In addition, the electrochemical performance of LiFePO₄ products synthesized from FePO₄ + x/2 Li₂CO₃ + C {\hbox{FeP}}{{\hbox{O}}_4} + x{/2}\,{\hbox{L}}{{\hbox{i}}_2}{\hbox{C}}{{\hbox{O}}_3} + {\hbox{C}} (sequentially varying the amount of x) at 1,000 °C has also been measured. The stoichiometric LiFePO₄ product shows the best capacity, while the off-stoichiometric material demonstrates different levels of impurities that have an effect on the performance of the material. The results indicate that adequate capacity at low discharge rates can be obtained using standard milling techniques, but, in order to obtain material from a melt cast synthesis that provides higher performance at faster discharge rates, a further particle size reduction will be required.     

A Perovskite Electrolyte That Is Stable in Moist Air for Lithium‐Ion Batteries

Solid‐oxide Li⁺ electrolytes of a rechargeable cell are generally sensitive to moisture in the air as H⁺ exchanges for the mobile Li⁺ of the electrolyte and forms insulating surface phases at the electrolyte interfaces and in the grain boundaries of a polycrystalline membrane. These surface phases dominate the total interfacial resistance of a conventional rechargeable cell with a solid–electrolyte separator. We report a new perovskite Li⁺ solid electrolyte, Li_0.38Sr_0.44Ta_0.7Hf_0.3O_2.95F_0.05, with a lithium‐ion conductivity of σ_Li=4.8×10^?4 S cm^?1 at 25 °C that does not react with water having 3≤pH≤14. The solid electrolyte with a thin Li⁺‐conducting polymer on its surface to prevent reduction of Ta⁵⁺ is wet by metallic lithium and provides low‐impedance dendrite‐free plating/stripping of a lithium anode. It is also stable upon contact with a composite polymer cathode. With this solid electrolyte, we demonstrate excellent cycling performance of an all‐solid‐state Li/LiFePO₄ cell, a Li‐S cell with a polymer‐gel cathode, and a supercapacitor.     

Sur un nouvel hétéropolytungstate lacunaire à squelette X2W21 dérivé du polytungstate [H6X2W22O76] (X = Sb,Bi)

A novel vacant heteropolytungstate of skeleton X₂W₂₁ derived from the polytungstate [H₆X₂W₂₂O₇₆]^8– (X = Sb,Bi). Five heteropolytungstates Na₈[H₆Sb₂W₂₁O₇₃]·16.5 H₂O, Na₈[H₆Sb₂W₂₁O₇₃]·19 H₂O, Na₈[H₆Bi₂W₂₁O₇₃]·16.5 H₂O, Li₂Na₆[H₆Sb₂W₂₂O₇₆]·14.5 H₂O, and Na₅[H₇Sb₂NiW₂₁O₇₃(H₂O)₃]·20 H₂O were prepared and studied by X-ray diffraction. The values of isotropic temperature factors of the external tungsten atom and of its three terminal oxygen atoms were compared to those of same-type atoms, firstly of the same polytungstate, and secondly inside this five-compound family. This analysis led to the conclusion that the vacant assembly X₂W₂₁O₇₃ (X = Sb,Bi) does exist and that the vacancy may be filled up with a first row transition metal such as nickel. To cite this article: Y. Jeannin, C. R. Chimie 7 (2004).     

Transport properties and lithium insertion study in the p-type semi-conductors AgCuO2 and AgCu0.5Mn0.5O2

The transport properties and lithium insertion mechanism into the first mixed valence silver-copper oxide AgCuO₂ and the B-site mixed magnetic delafossite AgCu_0.5Mn_0.5O₂ were investigated by means of four probes DC measurements combined with thermopower measurements and in situ XRD investigations. AgCuO₂ and AgCu_0.5Mn_0.5O₂ display p-type conductivity with Seebeck coefficient of Q=+2.46 and +78.83 μV/K and conductivity values of σ=3.2×10⁻¹ and 1.8×10⁻⁴ S/cm, respectively. The high conductivity together with the low Seebeck coefficient of AgCuO₂ is explained as a result of the mixed valence state between Ag and Cu sites. The electrochemically assisted lithium insertion into AgCuO₂ shows a solid solution domain between x=0 and 0.8Li⁺ followed by a plateau nearby 1.7 V (vs. Li⁺/Li) entailing the reduction of silver to silver metal accordingly to a displacement reaction. During the solid solution, a rapid structure amorphization was observed. The delafossite AgCu_0.5Mn_0.5O₂ also exhibits Li⁺/Ag⁺ displacement reaction in a comparable potential range than AgCuO₂; however, with a prior narrow solid solution domain and a less rapid amorphization process. AgCuO₂ and AgCu_0.5Mn_0.5O₂ provide a discharge gravimetric capacity of 265 and 230 mA h/g above 1.5 V (vs. Li⁺/Li), respectively, with no evidence of a new defined phases.     

Nonempirical calculations of potential energy surfaces,structures, and stabilities of OF2Li+, SF2Li+, F2Li+, and CIFLi+ ions

Nonempirical calculations were carried out for the potential energy surfaces of OF₂Li⁺, SF₂Li⁺, F₂Li⁺, and ClFLi⁺ using the SCF/TEHD+P approximation. The stability of the bridged structure in comparison with the classical structure is enhanced upon replacement of the oxygen atom by sulfur and replacement of fluorine by chlorine. A bridged structure with Li–F–M and . bonds is the major form for all the fluorides examined. The classical structure LiMF _k ⁺, where Li is bound directly to the M atom, corresponds to an apex of a potential barrier and is either close or greater on an energy scale to the dissociation limit to Li⁺+MF _k . A comparison was made with analogous hydride complexes, which, in contrast to the fluorides, display isomerism.Institute of New Chemical Problems, Academy of Sciences of the USSR. Translated from Zhurnal Strukturnoi Khimii, Vol. 30, No. 6, pp. 19–22, November–December, 1989.