A statistical model to evaluate analyte homogeneity for a material.

An underlying assumption for collaborative studies is that the analyte variation among test samples of the material (i.e., matrix and analyte concentration combination) under study has a negligible influence on the estimates of precision for the method. This assumption is expected to be fulfilled when the material under study is prepared (i.e., thoroughly mixed) such that the analyte is distributed uniformly throughout the matrix. Statistical design and intra-class correlation analysis procedures are proposed to assess the similarity or agreement among analytical results among- and within-containers for single and multiple occasions of use (e.g., collaborative and proficiency studies).     

The role of reference materials

In this article the role of reference materials is confined to chemical measurements only. Recognized reference materials are one of the tools to obtain comparability of analytical results. Recognition demands confidence in the reference materials and in the reference material producers. A reference material producer is a technical competent body that is fully responsible for the certified or other property values of the reference material. The "analyte" has to be specified in relation to the selectivity of analytical procedure. The full range of reference materials can be presented as a three-dimensional space of the coordinates: analyte, matrix and application. If reference materials are used for calibration or correction of calibrations they establish the traceability of results of chemical measurements. The traceability is only valid within a stated range of uncertainty. Pure substances can represent the unit of amount of substance. A precondition is the microscale specification of the analyte and the accurate determination of the main component and/or the impurities.     

Methodology in internal quality control of chemical analysis

Internal quality control (IQC) is an essential feature of routine analysis, serving to ensure that the uncertainty of results found during the validation of a procedure is maintained over long periods of time. The primary method of IQC is to analyse a surrogate material alongside the test materials in every run of analysis and thus address run-to-run precision (a subset of VIM3-defined ‘intermediate conditions’). This ‘control material’ must be as similar as practicable in composition to the routine test materials, although there are always some differences. Results from the control material (control values) are plotted on a control chart, and out-of-control results have to be investigated and problems rectified. Considerable care is needed in obtaining correct values of the parameters for determining statistical control limits, and these can be adequately estimated only during routine use of the analytical procedure. In contrast, target control limits have to be set on a fitness-for-purpose basis and are necessarily wider that statistical control limits. An additional type of internal quality control can be executed by the analysis of duplicate test portions of some of the actual test samples. This provides a realistic dispersion, but addresses only repeatability precision. A further complication of duplication is that the precision of results typically varies with concentration of the analyte.     

The role of reference materials

 In this article the role of reference materials is confined to chemical measurements only. Recognized reference materials are one of the tools to obtain comparability of analytical results. Recognition demands confidence in the reference materials and in the reference material producers. A reference material producer is a technical competent body that is fully responsible for the certified or other property values of the reference material. The "analyte" has to be specified in relation to the selectivity of analytical procedure. The full range of reference materials can be presented as a three-dimensional space of the coordinates: analyte, matrix and application. If reference materials are used for calibration or correction of calibrations they establish the traceability of results of chemical measurements. The traceability is only valid within a stated range of uncertainty. Pure substances can represent the unit of amount of substance. A precondition is the microscale specification of the analyte and the accurate determination of the main component and/or the impurities.

     

Selection and authentication of botanical materials for the development of analytical methods

Herbal products, for example botanical dietary supplements, are widely used. Analytical methods are needed to ensure that botanical ingredients used in commercial products are correctly identified and that research materials are of adequate quality and are sufficiently characterized to enable research to be interpreted and replicated. Adulteration of botanical material in commerce is common for some species. The development of analytical methods for specific botanicals, and accurate reporting of research results, depend critically on correct identification of test materials. Conscious efforts must therefore be made to ensure that the botanical identity of test materials is rigorously confirmed and documented through preservation of vouchers, and that their geographic origin and handling are appropriate. Use of material with an associated herbarium voucher that can be botanically identified is always ideal. Indirect methods of authenticating bulk material in commerce, for example use of organoleptic, anatomical, chemical, or molecular characteristics, are not always acceptable for the chemist’s purposes. Familiarity with botanical and pharmacognostic literature is necessary to determine what potential adulterants exist and how they may be distinguished.     

Production and stability testing of incurred reference materials for the anabolic steroid trenbolone in bovine urine.

The production of stable reference materials with incurred residues of veterinary drugs is necessary for the validation of methods of analysis, including the determination of critical performance characteristics. A reference material for trenbolone in bovine urine was produced and the long-term stability was tested. From a pilot 16 week stability study on seven batches containing different additives it was concluded that the use of preservatives does not improve the stability of the residue. A final batch of reference material of 800 vials each containing 5 ml of urine with a target concentration of 5 micrograms l-1 was prepared. The homogeneity and long-term stability of the material were tested. The material was found to be homogeneous. Based on the results of a 52 week stability study it was concluded that the material is stable, using the current analytical methodology. For the development of reference materials, highly accurate and precise analytical methods are necessary. However, the current analytical methodology is not suitable for full evaluation and certification. Currently, a new LC-MS method is being developed. After validation of this method, the stability and homogeneity study will be repeated.     

A comparative analysis of gold-rich plant material using various analytical methods

During 2003 a field demonstration of gold phytoextraction technology was conducted in Brazil. As there is no commercially available biogeochemical standard reference material with an elevated concentration of gold, the trial biomass was analysed for its gold content using five analytical methods, at five laboratories, to confirm the concentration of gold in the harvested plant material. Nitric and hydrochloric acid digest followed by ICP-OES solution analysis of a doré bead prepared through fire assay of vegetative material was considered the benchmark analytical method to which the other results were compared. The gold concentrations reported by the five laboratories varied widely. Flame atomic absorption analysis of a solution prepared through the digest of plant ash by aqua regia proved the most accurate analytical method relative to fire assay. Gold concentrations reported by a New Zealand commercial laboratory using ICP-MS and a standard ‘biological materials digest’ procedure were affected by the digest method employed. X-ray fluorescence results may have been affected by synthetic standards that were prepared specifically for this investigation. Alternatively, matrix effects may not have been fully corrected for using XRF. Analysis of metal-rich biomass is becoming more common due to the popularity of studies that use plants to absorb heavy metals. The results of our comparative investigation emphasise that due care and consideration must be given to the selection of the analytical method chosen to analyse such plant material. Our results also highlight the need for standard reference materials that are suitably enriched in metals, such that these may be of use to phytoextraction studies.     

Long-term stability study on a Perna perna mussel candidate reference material

The long-term stability study, one of the steps in the characterization of new reference materials, is performed on freeze-dried biological reference materials to verify if they may be stored at room temperature without modification of the property values of interest. In this study, instrumental neutron activation analysis was used in a 12-month long isochronous long-term stability study performed on a Perna perna mussel candidate reference material. No trend in the results was observed in respect to measurement order and exposition period to room temperature. The assessment of the analysis of variance test as well as the normalized results to the control temperature showed no systematic changes in the mass fractions of Ag, As, Br, Co, Cr, Cs, Fe, Eu, La, Na, Rb, Sc, Se, Th and Zn during the test period. The result showed that the candidate reference material may be stored at room temperature without significant changes in composition for the determined elements.     

Dimethylsulfone as a universal standard for analysis of organics by QNMR

Quantitative nuclear magnetic resonance (QNMR) is a primary analytical method which allows the use of a standard not directly related to the target analyte. This could allow the introduction of a single universal reference material (URM) to which all other organic standard reference materials/certified reference materials may be compared. Dimethylsulfone is a simple substance that fulfils all criteria necessary as the URM to which the QNMR analysis of all other organic substances may be referenced and hence we propose this as a candidate for this purpose.     

Interactive programme for evaluation of circular analyses (IPECA)

A PC-based interactive programme is described which is designed to help in suggesting the best estimate of the true value of an analyte content from results of collective studies aiming at deriving consensus values and/or reference material preparation by employing combined statistical and analytical considerations. The Grubbs, Dixon, Huber tests, and the coefficients of skewness and curtosis tests are used for outlier detection, the Bartlett, Cochran, and the standard error tests are employed for testing variance homogeneity testing and/or variance outliers identification, while the normality of results distribution is tested according to the Kolmogoroff-Smirnoff-Lilliefors and Shapiro-Wilk tests. One-way analysis of variance (ANOVA) is employed to test differences among means of results obtained in different conditions (laboratories, analytical methods, etc.) and to calculate the overall mean and its confidence interval accordingly. Points for an analytical discussion are given which should be considered prior to a decision whether a result of a trace element determination, identified as an outlier from statistical reasons, should be rejected.     

Method of determination of appropriate heat treatment of animal meal by immunoassay developed for detection of cooked beef: interlaboratory study.

An interlaboratory trial was conducted for the validation of an enzyme-linked immunosorbent assay (ELISA) method for determination of appropriate heat treatment of animal meal. A commercially available ELISA test kit developed for the identification of beef in cooked food was used in the study. Twelve laboratories from 7 European countries examined 2 different analytical protocols to establish the most appropriate analytical method. Three different samples were used, 2 animal waste materials sterilized at 129 and 134 degrees C (wet conditions), respectively, and a meat and bone meal material processed at dry conditions (maximum temperature, 140 degrees C). Statistical evaluation applying t-statistics showed that the animal meal treated according to European legislation (>133 degrees C) was clearly distinguishable from the 2 other test materials at a 99% confidence level using both analytical protocols. This method can be considered as a complementary test to the immunoassay developed for the detection of pork in cooked food that is already applied in routine analysis for the surveillance of rendering plants.     

铝锰铁合金标准物质的研制

依据GB/T15000.3—2008、GB/T15000.5—1994、YB/T082—1996和相关ISO导则研制了铝锰铁合金化学分析用标准样品。样品经过加工混匀后,按要求进行粒度实验和均匀性检验。采用Minitab软件进行均匀性数据的正态性检验,然后用方差法进行均匀性检验,各元素F值均小于临界值F0.05,表明被检元素的均匀性良好。由7家有资质的实验室采用多种不同原理,准确、可靠的分析方法协作定值分析,对分析结果进行统计和处理,得到了定值元素的认定值。结果表明该标准物质均匀性和稳定性以及定值准确性均达到国家标准物质的性能指标,符合国家计量技术规范的要求。     

固体分层取样方案的最优化设计

本文首次从理论上探讨了取得量对分层取样误差的影响,提出了总取样量一定时各层的最佳取样量和最小取样方差的计算公式,从而为分层取样的最佳取样方案设计提供了理论依据。     

Sampling hazelnuts for aflatoxin: uncertainty associated with sampling, sample preparation, and analysis

The variability associated with the aflatoxin test procedure used to estimate aflatoxin levels in bulk shipments of hazelnuts was investigated. Sixteen 10 kg samples of shelled hazelnuts were taken from each of 20 lots that were suspected of aflatoxin contamination. The total variance associated with testing shelled hazelnuts was estimated and partitioned into sampling, sample preparation, and analytical variance components. Each variance component increased as aflatoxin concentration (either B1 or total) increased. With the use of regression analysis, mathematical expressions were developed to model the relationship between aflatoxin concentration and the total, sampling, sample preparation, and analytical variances. The expressions for these relationships were used to estimate the variance for any sample size, subsample size, and number of analyses for a specific aflatoxin concentration. The sampling, sample preparation, and analytical variances associated with estimating aflatoxin in a hazelnut lot at a total aflatoxin level of 10 ng/g and using a 10 kg sample, a 50 g subsample, dry comminution with a Robot Coupe mill, and a high-performance liquid chromatographic analytical method are 174.40, 0.74, and 0.27, respectively. The sampling, sample preparation, and analytical steps of the aflatoxin test procedure accounted for 99.4, 0.4, and 0.2% of the total variability, respectively.     

Use of an excess variance approach for the certification of reference materials by interlaboratory comparison

In the nuclear field, the accuracy and comparability of analytical results are crucial to insure correct accountancy, good process control and safe operational conditions. All of these require reliable measurements based on reference materials whose certified values must be obtained by robust metrological approaches according to the requirements of ISO guides 34 and 35. The data processing of the characterization step is one of the key steps of a reference material production process. Among several methods, the use of interlaboratory comparison results for reference material certification is very common. The DerSimonian and Laird excess variance approach, described and implemented in this paper, is a simple and efficient method for the data processing of interlaboratory comparison results for reference material certification. By taking into account not only the laboratory uncertainties but also the spread of the individual results into the calculation of the weighted mean, this approach minimizes the risk to get biased certified values in the case where one or several laboratories either underestimate their measurement uncertainties or do not identify all measurement biases. This statistical method has been applied to a new CETAMA plutonium reference material certified by interlaboratory comparison and has been compared to the classical weighted mean approach described in ISO Guide 35. This paper shows the benefits of using an “excess variance” approach for the certification of reference material by interlaboratory comparison.     

Nuclear, chemical, and physical characterization of nuclear materials

The goal of nuclear forensics is to establish an unambiguous link between illicitly trafficked nuclear material and its origin. The Los Alamos National Laboratory (LANL) Nuclear Materials Signatures Program has implemented a graded “conduct of operations” type analysis flow path approach for determining the key nuclear, chemical, and physical signatures needed to identify the manufacturing process, intended use, and origin of interdicted nuclear material. This analysis flow path includes both destructive and non-destructive characterization techniques and has been exercized against different nuclear materials from LANL’s special nuclear materials archive. Results obtained from the case study will be presented to highlight analytical techniques that offer the critical attribution information.     

Strategy to establish the number of replicates of a medical laboratory test

The allowable error of a test in medical laboratories can be defined by the customer demands based upon the use of the test, or by the appropriate biological variation. After correction for systematic bias, the actual analytical variation is compared to the stated allowable error. On top of that, proper quality control rules should be implemented regarding the number of control materials and the desired analytical quality assurance as well as assessment. A strategy is outlined that balances all these factors, taking advantage of the possibility to diminish the actual analytical variation through the use of replicate tests.     

Application of the ANOVA-PCA method to stability studies of reference materials

Near infrared spectroscopy (NIRS) is an analytical technique that can be very useful for stability studies in particular because of its non destructive analytical capability. However, the spectral interpretation and treatment of this kind of multivariate data remains difficult without the use of chemometrics. In this article, a recent chemometrics method, analysis of variance - principal component analysis (ANOVA-PCA), was used for NIRS stability studies of sunflower and bread wheat external reference materials (ERM). It provided a practical tool for the study of the significance of various storage conditions according to an experimental design. Thus, the effect of the temperature, the nature of the atmosphere in the packaging and the storage duration were tested. ANOVA-PCA highlighted the influence of temperature and storage duration on the stability of the sunflower materials. For the bread wheat materials, the storage conditions did not have a significant effect on stability. Consequently, by applying ANOVA-PCA to near infrared spectral data, the sunflower materials were found to be considered stable for the time length of the study, i.e. 18 months stored in a cold room, while the bread wheat materials were found to be considered stable for the time length of the study, i.e. 12 months under the same conditions.     

Polymerase chain reaction technology as analytical tool in agricultural biotechnology

The agricultural biotechnology industry applies polymerase chain reaction (PCR) technology at numerous points in product development. Commodity and food companies as well as third-party diagnostic testing companies also rely on PCR technology for a number of purposes. The primary use of the technology is to verify the presence or absence of genetically modified (GM) material in a product or to quantify the amount of GM material present in a product. This article describes the fundamental elements of PCR analysis and its application to the testing of grains. The document highlights the many areas to which attention must be paid in order to produce reliable test results. These include sample preparation, method validation, choice of appropriate reference materials, and biological and instrumental sources of error. The article also discusses issues related to the analysis of different matrixes and the effect they may have on the accuracy of the PCR analytical results.     

Characterization of NIST food-matrix standard reference materials for their vitamin C content

The vitamin C concentrations in three food-matrix Standard Reference Materials (SRMs) from the National Institute of Standards and Technology (NIST) have been determined by liquid chromatography (LC) with absorbance detection. These materials (SRM 1549a Whole Milk Powder, SRM 1849a Infant/Adult Nutritional Formula, and SRM 3233 Fortified Breakfast Cereal) have been characterized to support analytical measurements made by food processors that are required to provide information about their products’ vitamin C content on the labels of products distributed in the United States. The SRMs are primarily intended for use in validating analytical methods for the determination of selected vitamins, elements, fatty acids, and other nutrients in these materials and in similar matrixes. They can also be used for quality assurance in the characterization of test samples or in-house control materials, and for establishing measurement traceability. Within-day precision of the LC method used to measure vitamin C in the food-matrix SRMs characterized in this study ranged from 2.7 % to 6.5 %.