Direct coupling of capillary supercritical fluid chromatography with supercritical fluid extraction using modified carbon dioxide

Capillary supercritical fluid chromatography has been directly coupled with supercritical fluid extraction using modified carbon dioxide. The mixed fluids were prepared with a single pump on-line mixing system. The most important step in the SFE-SFC interface was the elimination of the modifier solvent. This was achieved by use of a coupled trap, 0.1 mm i.d. and 0.53 mm i.d. capillary tubing connected in series, with the collected solutes refocused on the second (0.53 mm i.d.) trap before transfer into the separation column. This enabled complete elimination of various modifier solvents and high efficiency collection of the solutes. The effect of the modifier on trapping efficiency was investigated using methanol, ethanol, dichloromethane, hexane, and toluene at a variety of concentrations. n-Eicosane was, for example, trapped quantitatively by modified carbon dioxide containing up to 13 % (w/w) methanol. The use of the technique has been demonstrated by selective extraction of n-paraffins, fatty acid methyl esters, and alcohols from a silica matrix; the effect of different modifiers on the extraction of a mixture of pesticides from soil has also been investigated.     

Analysis of sulphonamides using supercritical fluid chromatography and supercritical fluid chromatography-mass spectrometry

Packed-column supercritical fluid chromatography has been used for the separation of mixtures of sulphonamides on silica and amino-bonded stationary phases utilizing carbon dioxide with methanol modifier as the mobile phase. The effect of modifier concentration, column pressure and modifier identity on retention was also studied. Packed-column supercritical fluid chromatography-mass spectrometry (SFC-MS) of these mixtures utilizing both moving-belt and modified thermospray interfaces was also studied. The identification of sulphamethazine in a spiked porcine kidney extract was performed by SFC-MS using the moving-belt interface.     

Packed column supercritical fluid chromatography with light-scattering detection. II. Retention behaviour of squalane and glucose with mixed mobile phases

Summary Evaporative light scattering detectors can be used to detect organic substances without chromophoric groups in packed column supercritical fluid chromatography (SFC). A detector of this type has been used to detect squalane and glucose after SFC with various packed columns and binary mobile phases. In this study, the amount of organic modifier in carbon dioxide/modifier mixtures was varied. The results give further insight into the mechanisms that influence retention behaviour in packed column separations with super- and subcritical mobile phases. Squalane is an ideal non-polar test solute which shows long retention times on non-polar columns while its elution can be accelerated by non-polar modifiers in carbon dioxide. Glucose is an extremely polar solute containing hydroxyl groups. Elution of this sugar can be improved with polar modifiers. Column packings with polar end groups lead to high capacity ratios and long retention times for glucose. Most columns used in this study contained silica-based packing materials. For purposes of comparison, a polymeric packing (HEMA RP-18) was also employed.     

A detection method for unified chromatography: Ion mobility monitoring

Ion mobility monitoring has been used for detection in gas, supercritical fluid, and liquid chromatography, illustrating its potential as a method of detection for unified chromatography. Applications presented include GC-IMD of dioxins in fly ash, SFC-IMD of vitamin E, and HPLC-IMD of alkylamines. Ion mobility spectra of several mixed supercritical fluid mobile phases are also presented. Use of methanol, acetonitrile, and dichloromethane as modifiers of supercritical carbon dioxide, and use of supercritical dichlorodifluoromethane and chlorodifluoromethane as mobile phases had little effect on the reactant ion pattern at the flow rates and concentrations used in this study. Only when acetone was used as a modifier of carbon dioxide did the positive reactant ions change significantly. No effect of modifiers or mobile phase was observed for the negative reactant ions.     

Supercritical fluid extraction of sinomenine from Sinomenium acutum (Thumb) Rehd et Wils

Supercritical carbon dioxide, with and without a methanol modifier, was used to extract sinomenine from Sinomenium acutum (Thumb) Rehd et Wils. Sinomenine determinations were carried out using high-performance liquid chromatography (HPLC). The results show that the yield obtained after 2.5 h extraction with methanol-modified supercritical carbon dioxide was the highest (7.47 mg/g), while that obtained with only supercritical carbon dioxide was the lowest (0.17 mg/g). The recovery obtained with supercritical carbon dioxide, with and without a methanol modifier, could not be increased greatly by the method of the alkalinization of sample. Higher recoveries were obtained than extraction using methanol in Soxhlet extractor.     

Trapping efficiencies of various collection solvents after supercritical fluid extraction

A polarity test mix consisting of acetophenone, N, N-dimethylaniline, naphthalene, decanoic acid, 2-naphthol, and n-tetracosane was spiked onto sand, and extracted with supercritical carbon dioxide, to evaluate the collection efficiency of various solvents and solvent mixtures. Nine single collection solvent systems and four mixed collection solvent systems were studied. When one-component collection solvents were employed, quantitative (above 90%) recovery of all analytes was not possible. With mixed collection solvents, recoveries of 90% or better with all analytes studied were possible.     

Supercritical fluid extraction

Supercritical fluid extraction (SFE) provides for the first time a viable option to conventional and widely used Soxhlet extraction. The ability to change the solvating power of a single supercritical fluid by changing its density is an exceedingly attractive feature. An environmentally safe alternative such as supercritical carbon dioxide to organochlorine solvents which are widely used today in many government and industrial analytical laboratories for sample preparation is desirable. SFE may also constitute a viable alternative to other popular sample preparation techniques such as liquid-liquid extraction, solid phase extraction and purge/trap. Much research, however, must be done in order to understand, optimize and apply this technology. For example, (a) automation of extraction, (b) matrix effects, (c) new fluids/modifiers/additives, (d) trapping efficiency, (e) recovery of extracted analytes, and (f) extraction kinetics are some areas which need a greater understanding. This review is concerned with many of these topics as they relate to trace organic analysis wherein SFE is the primary sample preparation technique.     

Feasibility of on-line supercritical fluid extraction of steroids from aqueous-based matrices with analysis via gas chromatography-mass spectrometry

The solubility of testosterone, boldenone, androstenone, etiocholanolone, and epitestosterone are measured in pure supercritical CO2. Testosterone exhibited the highest solubility in supercritical CO2. The solubility of all steroids except epitestosterone increased by one order of magnitude with increasing pressure from 100 to 400 atm. Epitestosterone had the lowest solubility in supercritical CO2 and its solubility was not affected by pressure. The extraction efficiency of steroids from an aqueous saline environment exceeded 95%. Because of the partial solubility of water in supercritical CO2, the addition of a moisture trap after the aqueous vessel is necessary to prevent the plugging and deterioration of the gas chromatographic (GC) column. It is demonstrated that on-line supercritical fluid extraction-GC-mass spectrometry is feasible for the quantitative extraction and analysis of steroids from both saline and urine solutions. However, it is determined that the adsorbent vessel filled with Hydromatrix is not sufficient to trap all the moisture, and after 3 to 4 extractions, the GC column efficiency lowered.     

Extraction of Microcystins From Cyanobacteria Using Aqueous Methanol Modified Supercritical Carbon Dioxide

A new method for the fast extraction of microcystins RR and LR in cyanobacterium was developed using carbon dioxide supercritical fluid. The microcystins were successfully extracted with 90% aqueous methanol modified CO₂. The method developed here has several advantages over solid phase extraction sample preparation technique for the analysis of microcysins.     

Supercritical fluid extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin from sediment samples

Supercritical fluid extraction (SFE) is a promising technique for the extraction of 2,3,7,8-tetrachlorodibenzo-p-dioxin (2,3,7,8-TCDD) from environmental matrices such as contaminated sediments. The ability of SFE to solubilize many organic contaminants is well documented in industrial processes but its analytical applications were exploited just recently. In this study supercritical carbon dioxide and nitrous oxide and their mixtures with 2% methanol were used to extract 2,3,7,8-TCDD from aquatic sediments. An attractive feature of this process is that the carbon dioxide, being a virtually inert fluid, leaves no solvent residue on the processed sediment. Almost 100% of the 2,3,7,8-TCDD can be extracted from a sediment spiked with 200 μg/kg 2,3,7,8-TCDD in 30 minutes by using supercritical carbon dioxide + 2% methanol. Cleanup procedure is compared with the Soxhlet extraction procedure currently used as a standard method for extracting dioxins from sediment samples.     

Evaluation of dithiocarbamates and beta-diketones as chelating agents in supercritical fluid extraction of Cd, Pb, and Hg from solid samples

The use of four dithiocarbamates and three fluorinated β-diketones as potential chelating agents for three transition metal ions (Cd²⁺, Pb²⁺, and Hg²⁺) extracted from spiked sand and filter paper samples by supercritical fluid extraction (SFE) was investigated. The extractions were performed at 45°C and 250 atm for spiked sand samples and at 60°C and 200 atm for filter paper samples using supercritical carbon dioxide modified with 5% methanol. At 250 atm and using carbon dioxide modified with 5% methanol, the recoveries of Cd²⁺, Pb²⁺, and Hg²⁺ ions from spiked sand samples were 95% with lithium bis(trifluoroethyl)dithiocarbamate (LiFDDC) as the chelating agent; they ranged from 83–97% with diethylammonium diethyldithiocarbamate and from 87–97% with sodium di-ethyldithiocarbamate as chelating agents, and from 68–96% with trifluoracetylacetone, hexafluoroacetylacetone, and thenoylfluoroacetone as chelating agents. Ammonium pyrrolidinedithiocarbamate was not effective in the chelation SFE of Cd²⁺, Pb²⁺, and Hg²⁺ ions from either spiked sand or spiked filter paper samples under the extraction conditions used. Supercritical carbon dioxide alone gave consistently lower analyte recoveries than supercritical carbon dioxide modified with 5% methanol. The results suggest that the solubility of the metal chelate in the supercritical fluid plays a more important role than the solubility of the chelating agent in the supercritical fluid, as long as sufficient chelating agent is present in the fluid phase. Fluorination of the chelating agent, as in the case of LiFDDC, increases the solubility of the metal chelate, and subsequently enhances the extraction efficiency for the metal ions.     

SFE of PAHs from soils with a high carbon content and analyte collection via combined liquid/solid trapping

Polynuclear aromatic hydrocarbons (PAHs) are recovered from a soil with a high carbon content (ca. 50%) with supercritical fluid extraction (SFE) as well as with conventional Soxhlet extraction. The influence of temperature and modifier volume on SFE efficiency and the effect of a combined liquid/solid trap for analyte collection are investigated in this study. Such traps, which make analyte collection and clean-up possible in one step, are compared with conventional analyte collection in pure organic solvents. A comparison between reproducibility and efficiency of SFE and Soxhlet extraction is presented.     

填充柱超临界流体色谱系统中的溶剂效应

 考察了填充柱超临界流体色谱法 (SFC)中的样品溶剂及连续进样等因素对化合物保留行为变化的影响规律。以超临界 CO2 或含低体积分数甲醇的 CO2 为流动相时 ,氨基柱上组分的保留时间随着样品溶剂的极性增大而增大 ,而溶剂对 C1 8柱上组分的保留时间影响不大 ;在 C1 8柱上 ,溶剂对连续进样的后续效应不强 ;而在氨基柱上 ,甲醇溶液的后续效应比丙酮、氯仿溶液的后续效应强。当甲醇的体积分数大于 1 .0 %时 ,溶剂的效应明显减弱。这种变化规律对填充柱 SFC的合理进样并获得重现性良好的色谱数据具有实际意义。     

New device for controlling the amount of methanol in carbon dioxide mobile phase for supercritical fluid chromatography

A new device to accurately deliver a small amount of methanol into supercritical carbon dioxide fluid is described. Carbon dioxide, the most widely used mobile phase in supercritical fluid chromatography, is a relatively non-polar fluid, and hence the addition of a small amount of methanol could change the solvent strength of the mobile phase. In this work, supercritical CO₂ and methanol are delivered from the pump to a 100-μl mixing chamber in which a small magnetic bar is rotating. After passing through the mixing chamber, supercritical CO₂ is changed to a new mobile phase with different polarity. The modified mobile phase was successfully used for the separations of polar compounds and polyaromatic hydrocarbons (PAHs).     

Supercritical fluid extraction of nylon 6: An investigation into the factors affecting the efficiency of extraction of caprolactam and its oligomers

Caprolactam and oligomers can be efficiently extracted from nylon 6 by use of supercritical fluid extraction with carbon dioxide containing 7.5 % (m/m) methanol as the extraction fluid. The application of a static extraction, using an additional amount of methanol, is necessary to obtain high extraction efficiencies.     

Combined supercritical fluid chromatographic tests to improve the classification of numerous stationary phases used in reversed-phase liquid chromatography

In this paper, we present a combination of a key-solute test based on retention and separation factors of large probe solutes (carotenoid pigments) and a quantitative structure-retention relationship analysis based on the retention factors of small probe solutes (aromatic compounds), both performed in supercritical fluid chromatography, to investigate the different chromatographic behaviour of octadecylsiloxane-bonded stationary phases of all sorts: classical, protected against silanophilic interactions or not, containing polar groups (endcapping groups or embedded groups). The results indicate that the two approaches chosen (carotenoid test and solvation parameter model) are complementary and provide precise information on the chromatographic behaviour of ODS phases. The applicability of the classification to the selection of stationary phases is evidenced with some examples of separations.     

Exploration and optimization of conditions for quantitative analysis of lignans in Schisandra chinensis by an online supercritical fluid extraction with supercritical fluid chromatography system

An online supercritical fluid extraction with supercritical fluid chromatography system could provide sequential extraction and quantitative analysis of lignans in Schisandra chinensis. Supercritical fluid extraction conditions were optimized at 15 MPa, 50°C, and 4 min with supercritical CO₂ adding 1% methanol; the elution volume and flow rate were set at 6 mL and 2 mL/min to blow extract out of the tank completely. The split‐flow rate was confirmed at 2.5%, which determines injection volume and accuracy of quantitative detection. The factors having negative influences on supercritical fluid chromatography retention in the online system, including sample loading forms and backpressure settings, are discussed in the paper. At last, an extraction‐quantitative method for lignans in Schisandra chinensis was developed, which could be finished within 19.5 min. The total content percentage of four lignans (Schisandrin, Schisandrin A, Schisandrin B and Schisandrol B) in four batches was respectively measured to be 1.42, 1.54, 1.62, and 1.90%.     

Performance comparison between packed column supercritical fluid chromatography (SFC) and HPLC using cyclandelate as the model analyte

A reproducible and fast method has been developed for the assay of cyclandelate in bulk and drug forms using packed column supercritical fluid chromatography using dicyclohexyl phthalate (DCHP) as internal standard. The drug and the internal standard were resolved by elution with supercritical fluid carbon dioxide doped with 14.29% (v/v) methanol on an RP-C₁₈ column and detected spectrophotometrically at 228 nm. Chromatographic figures of merit using C₈, C₁₈, cyano and phenyl columns have been assessed. Parallel experiments have been performed by HPLC and the data have been compared. Supercritical fluid extraction using CO₂ modified with a small amount of methanol was found to give quantitative analytical recoveries of cyclandelate from a dosage form. SFC has been shown to be a viable, faster alternative technique to HPLC generating less disposable waste.     

Extraction of paeonol from Jisheng Shenqi Wan using supercritical fluid extraction

Supercritical carbon dioxide with or without methanol and 95% ethanol modifiers was used to extract paeonol from the pills of Jisheng Shenqi Wan and high-performance liquid chromatography (HPLC) was used to analyze the extract. The effect of temperature and pressure on the yield of paeonol was tested. The results show that the recovery of paeonol was improved by adding a polar modifier, such as methanol and 95% ethanol in supercritical fluid. The yield obtained after 120 min extraction with 95% ethanol modified-supercritical carbon dioxide was the highest (1.51, w/w at 60 degrees C and 400 bar), while that obtained with supercritical carbon dioxide only at 40 degrees C was the lowest from 0.67 to 0.83 over a range of 200-600 bar.     

Comparison of supercritical fluid and Soxhlet extractions for the quantification of hydrocarbons from Euphorbia macroclada

This study compares conventional Soxhlet extraction and analytical scale supercritical fluid extraction (SFE) for their yields in extracting of hydrocarbons from arid-land plant Euphorbia macroclada. The plant material was firstly sequentially extracted with supercritical carbon dioxide, modified with 10% methanol (v/v) in the optimum conditions that is a pressure of 400 atm and a temperature of 50 °C and then it was sonicated in methylene chloride for an additional 4 h. E. macroclada was secondly extracted by using a Soxhlet apparatus at 30 °C for 8 h in methylene chloride. The validated SFE was then compared to the extraction yield of E. macroclada with a Soxhlet extraction by using the Student’s t-test at the 95% confidence level. All of extracts were fractionated with silica-gel in a glass column to get better hydrocarbon yields. Thus, the highest hydrocarbons yield from E. macroclada was achieved with SFE (5.8%) when it compared with Soxhlet extractions (1.1%). Gas chromatography (GC) analysis was performed to determine the quantitative hydrocarbons from plant material. The greatest quantitative hydrocarbon recovery from GC was obtained by supercritical carbon dioxide extract (0.6 mg g⁻¹).