Synthesis and properties of a novel perfluorononenyloxy group containing polyarylates

A series of novel perfluorononenyloxy group containing polyarylates were synthesized by a high-temperature solution condensation of 5-(perfluorononenyloxy)-isophthaloyl chloride ( II ) with various aromatic diols in o-dichlorobenzene. All the polyarylates were amorphous and readily soluble in many organic solvents such as o-chlorophenol, o-dichlorobenzene, chloroform, and polar aprotic solvents at room temperature or on heating. Transparent, tough, and flexible films of these polymers could be cast from the o-chlorophenol solutions. The polymers having inherent viscosity of 0.61–1.63 dL/g were obtained in quantitative yields. These polymers were thermally quite stable. The glass transition temperatures of these polyarylates were in the range of 219–242°C by DSC and 224–251°C by DMA, and the 10% weight loss temperatures in nitrogen and air were above 415 and 397°C, respectively. Moreover, these polymers maintained good mechanical properties (G′ ∼ 10⁸ Pa) up to 220°C and had lower moisture absorption than common polyarylates. The dielectric constants of these polymers ranged from 3.23 to 3.75. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 645–653, 1998     

Synthesis and electrochromism of novel organosoluble polyarylates bearing triphenylamine moieties

A series of novel aromatic polyarylates with triphenylamine units in the main chain and as the pendent group were prepared from the dicarboxylic acid monomer, N,N‐bis(4‐carboxyphenyl)‐N′, N′‐diphenyl‐1,4‐phenylenediamine (1), and various bisphenols. These polyarylates were amorphous and readily soluble in common organic solvents. They had excellent levels of thermal stability associated with moderately high T_g values (182–263 °C). These polymers exhibited strong UV–vis absorption bands at 357–360 nm in toluene solution and the photoluminescence spectra showed maximum bands around 493–503 nm in the green region. The hole‐transporting and electrochromic properties were examined by electrochemical and spectroelectrochemical methods. Cyclic voltammograms of the polyarylates exhibited two reversible oxidation redox couples in acetonitrile solution at E_onset 0.77–0.79 V and 1.12–1.14 V, respectively. The typical polymer 3b film revealed good stability of electrochromic characteristics, with color change from colorless to green and blue at applied potentials ranging from 0.00 to 1.24 V. These anodically polymeric electrochromic materials not only showed excellent reversible electrochromic stability with good green coloration efficiency (CE = 159 cm²/C) and blue coloration efficiency (CE = 154 cm²/C) but also exhibited high contrast of optical transmittance change (ΔT%), 54% in 895 nm for green color and up to 84% in 595 nm for blue color. After over 100 cyclic switches, the polymer films still exhibited excellent stability of electrochromic characteristics. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 2004–2014, 2007     

Reactions of the HO2 radical with OH,H, Fe2+ and Cu2+ at elevated temperatures

The temperature dependence of the rate constant for the reactions of HO₂ with OH, H, Fe²⁺ and Cu²⁺ has been determined using pulse radiolysis technique. The following rate constants, k (dm³ mol⁻¹ s⁻¹) at 20°C and activation energies, E_a (kJ mol⁻¹) have been found. The reaction with OH was studied in the temperature range 20–296°C (k=7.0×10⁹, E_a=7.4) and the reaction with H in the temperature range 5–149°C (k=8.5×10⁹, E_a=17.5). The reaction with Fe²⁺ was studied in the temperature range 16–118°C (k=7.9×10⁵, E_a=36.8) and the reaction with Cu²⁺ in the temperature range 17–211°C (k=1.1×10⁸, E_a=14.9).     

Synthesis,characterization and properties of a soluble polymer with a poly(phenylenevinylene) structure

Soluble poly(2,5-dialkoxy-1,4-phenylenevinylene) has been prepared via Stille coupling reaction between 2,5-dialkoxy-1,4-diiodobenzene and E-1,2-bis(tributylstannyl)-ethene in the presence of palladium complexes. Characterization of this material by means of ¹H and ¹³C nuclear magnetic resonance (NMR), ultraviolet/visible (UV/VIS) and infrared (IR) spectra is described. Molecular weights, determined by means of gelpermeation chromatography (GPC) analysis and referred to standard polystyrene, were in the range number-average molecular weights M _n = 2061–2544 and weight-average molecular weights M _w = 3347–3878. X-ray diffraction (XRD) analysis of the polymer showed semicrystalline structure. T_g = 57°C, transition to a stable smectic mesophase at 115°C and clearing point at 210°C were revealed by differential scanning calorimetry analysis, optical microscopy observation and XRD of the annealed polymer.     

Synthesis and characterization of aromatic polymers containing pendant silyl groups. I. Polyarylates

Polyarylates containing pendant silyl group were prepared by the phase-transfer catalyzed, two-phase polycondensations of 2,2-bis (4-hydroxyphenyl) propane with corresponding dicarbonyl chlorides such as 2-trimethylsilylterephthaloyl chloride, 5-trimethylsilylisophthaloyl chloride, 5-dimethylphenylsilylisophthaloyl chloride, and 5-triphenylsilylisophthaloyl chloride. The resulting amorphous polyarylates with glass transition temperatures of 163–214°C had inherent viscosities in the range of 0.41–0.95 dL/g. These polyarylates were readily soluble in common chlorinated hydrocarbons and it was possible to obtain transparent, flexible, and tough films from the polymer solutions. The prepared polyarylates showed fairly good thermal stabilities as well as tensile strengths, i.e., the tensile strengths of the cast films from chloroform solution were 6.0–6.7 kg/mm². And TGA data revealed 10% weight losses and residual weights at 800°C were 437–495°C and 27–40% under nitrogen atmosphere, respectively. © 1992 John Wiley & Sons, Inc.     

Friedel-crafts copolymerization of thiophene and p-di(chloromethyl)benzene. I. Products,kinetics, and mechanism of the early stages of the reaction

The rate of polymerization of thiophene, at concentrations of catalyst (SnCl₄), and thiophene of the same order as was subsequently used in studying the reaction between thiophene and di(chloromethyl)benzene, is of the order of 10^-2%/hr at 30°C. There is no significant self-condensation of DCMB under the same conditions. Since the reaction between thiophene and DCMB is complete at 30°C in minutes rather than hours, it is assumed that self-condensation of thiophene or DCMB during the reaction between them will be negligible and should not influence the course of the reaction or the structure of the resulting polymer. Reaction at 30°C is much too fast for convenient study. A temperature of 0°C is more appropriate and was used in subsequent kinetic work. The first two products of the condensation of p-di(chloromethyl)benzene (DCMB) with thiophene have been identified by a combination of mass, infrared, and nuclear magnetic resonance spectroscopy as thenylchloromethylbenzene (TCMB) and dithenylbenzene (DTB). DCMB, TCMB, and DTB have been estimated quantitatively during the course of the reaction by gas-liquid chromatography (GLC), and it has been established that the rates of each of the two reaction steps is first-order with respect to the chloro compound (DCMB and TCMB respectively), thiophene, and SnCl₄. Rate constants for these two consecutive reactions were calculated to be k₁ = 2.79 × 10^-4l.²/mole²-sec, k₂ = 6.37 × 10^-3l.²/mole²-sec; the corresponding energies of activation are E₁ = 7.93 kcal/mole, E₂ = 7°67 kcal/mole. These rate constants are appreciably higher than values previously obtained for the corresponding DCMB–benzene reactions.     

Kinetics of polymerization of methyl methacrylate initiated with cyclohexanone. Part I

The kinetics of radical polymerization of methyl methacrylate were investigated in a dioxane solution with cyclohexanone as initiator. It was found that the overall rate of reaction initiated with cyclohexanone (R_p) is proportional to the concentration of monomer and to the square root of the concentration of the initiator. The effect of temperature on the R_p in the temperature range of 65–95°C was discussed. The Arrhenius activation energy E_a estimated for the temperature range of 65–75°C was 137 kJ mol^?1.     

Complications in the 355 nm Pulsed-Laser Polymerization of N-Vinylcarbazole

The propagation kinetics of N-vinylcarbazole (NVC) were carefully investigated via the IUPAC-recommended pulsed-laser polymerization/size-exclusion chromatography technique (PLP-SEC) in the temperature range between –20 and 20°C using 355 nm pulsed irradiation and the photo initiator 2,2-dimethoxy-2-phenylacetophenone (DMPA) as a source of primary radicals. Using this experimental approach, propagation rate coefficients, k_p, were not accessible for temperatures exceeding 20°C. There is strong evidence that the monomer itself is excited by pulsed-laser light of 355 nm, thus contributing to the polymerization process via the formation of free radicals. In addition, UV light-induced cationic polymerization processes can not be ignored as a possible side reaction. NVC polymer also absorbs strongly at 355 nm and we speculate that this may lead to bond scission and branch network formation in the PLP process. Laser-controlled molecular weight distributions are only obtained for reaction temperatures below 20°C. The apparent Arrhenius parameters, E_A and A, are 22.8 kJ·mol^–1 and 3.6×10⁷ L·mol^–1·s^–1, respectively. These results are divergent from recent literature data.     

Preparation and properties of polyarylates from 5-t-butylisophthaloyl chloride and various bisphenols

Polyarylates containing a t-butyl pendant group were prepared from 5-t-butylisophthaloyl chloride and various bisphenols through the phase-transfer catalyzed two-phase polycondensation. The polyarylates having inherent viscosities up to 3.1 dL/g were obtained quantitatively. They were readily soluble in various solvents such as chloroform, m-cresol, and pyridine. Coloreless, transparent, and flexible films could be cast from the chloroform solutions of the polymers. The polyarylates had glass transition temperatures between 210 and 320°C, and did not lose weight below 350°C, with 10% weight loss being recorded at 395–450°C in air.     

Addition–fragmentation chain transfer: Molecular weight distributions and retardation in the system methyl methacrylate/methyl α‐(bromomethyl)acrylate

A detailed investigation of addition–fragmentation chain transfer (AFCT) in the free‐radical polymerization of methyl methacrylate (MMA) in the presence of methyl α‐(bromomethyl)acrylate (MBMA) was carried out to elucidate mechanistic details with efficient macromonomer synthesis as an underlying goal. Advanced modeling techniques were used in connection with the experimental work. Curve fitting of simulated and experimental molecular weight distributions with respect to the rate coefficient for addition of propagating radicals to MBMA (k_add) over 60–120 °C resulted in E_add = 21.7 kJ mol^?1 and A_add = 2.18 × 10⁶ M^?1 s^?1 and a very weak temperature dependence of the chain‐transfer constant (E_add ≈ E_p). The rate coefficient for fragmentation of adduct radicals at 60 °C was estimated as k_f ≈ 39 s^?1 on the basis of experimental data of the MMA conversion and the concentration of 2‐carbomethoxy‐2‐propenyl end groups. The approach developed is generic and can be applied to any AFCT system in which copolymerization does not occur and in which the resulting unsaturated end groups do not undergo further reactions. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 2640–2650, 2004     

Preparation and properties of fluorine-containing polyarylates from tetrafluoroisophthaloyl chloride and bisphenols

Fluorine-containing polyarylates having inherent viscosities of 0.2–0.8 dL/g were prepared from tetrafluoroisophthaloyl chloride and various bisphenols by low temperature solution polycondensation in chloroform with triethylamine or by two-phase polycondensation in a dichloromethane-water or nitrobenzene-water system with benzyltriethylammonium chloride as the phase transfer catalyst. These polyarylates were amorphous and were readily soluble in various solvents, including chloroform and N-methyl-2-pyrrolidone. The glass transition temperature of the polymer derived from 2,2-bis(4-hydroxyphenyl) propane was 150°C. These polyarylates started to lose weight around 350°C in an air or nitrogen atmosphere.     

Synthesis and characterization of new aromatic polyesters and polyethers derived from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene

New polyarylates and aromatic polyethers were synthesized from 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene, and aromatic dicarboxylic acid chlorides and aromatic dihalides, respectively. The polyarylates having inherent viscosities of 0.28–1.05 dL/g were synthesized by either the two-phase method or the high-temperature solution method. All the polymers were easily soluble in N-methyl-2-pyrrolidone, N,N-dimethylformamide, pyridine, m-cresol, 1,4-dioxane, and 1,1,2,2-tetrachloroethane. They have glass transition temperatures in the range of 217–250°C and showed no weight loss below 315°C in both air and nitrogen atmospheres. Aromatic polyethers with inherent viscosities of 0.85–1.21 dL/g were obtained by the polycondensation of 1,2-bis(4-hydroxyphenyl)-1,2-diphenylethylene and aromatic difluorides in the presence of potassium carbonate. These polymers having glass transion temperatures of 193–220°C were also soluble in the aforementioned solvents and stable up to around 350deg;C in both atmospheres. © 1994 John Wiley & Sons, Inc.     

Thermal properties and flame retardancy of novel epoxy based on phosphorus‐modified Schiff‐base

Through addition reaction of Schiff‐base terephthalylidene‐bis‐(p‐aminophenol) ( DP‐1 ) and diethyl phosphite (DEP), a novel phosphorus‐modified epoxy, 4,4'‐diglycidyl‐(terephthalylidene‐bis‐(p‐aminophenol))diphosphonate ether ( EP‐2 ), was obtained. An modification reaction between EP‐2 and DP‐1 resulted in an epoxy compound, EP‐3 , possessing both phosphonate groups and C?N imine groups. The structure of EP‐2 was characterized by Fourier transform infrared (FTIR), elemental analysis (EA), ¹H, ¹³C, and ³¹P NMR analyses. The thermal properties of phosphorus‐modified epoxies cured with 4,4'‐diaminodiphenylmethane (MDA) and 4,4'‐diaminodiphenyl ether (DDE) were studied by differential scanning calorimetry (DSC) and thermogravimetric analysis (TGA). The activation energies of dynamic thermal degradation (E_d) were calculated using Kissinger and Ozawa's methods. The thermal degradation mechanism was characterized using thermogravimetric analysis/infrared spectrometry (TG‐IR). In addition, the flame retardancy of phosphorus‐modified epoxy thermosets was evaluated using limiting oxygen index (LOI) and UL‐94 vertical test methods. Via an ingenious design, phosphonate groups were successfully introduced into the backbone of the epoxies; the flame retardancy of phosphorus‐modified epoxy thermosets was distinctly improved. Due to incorporation of C?N imine group, the phosphorus‐modified epoxy thermosets exhibited high thermal stabilities; the values of glass‐transition temperatures (T_gs) were about 201–210°C, the values of E_d were about 220–490 kJ/mol and char yields at 700°C were 49–53% in nitrogen and 45–50% in air. These results showed an improvement in the thermal properties of phosphorus‐modified epoxy by the incorporation of C?N imine groups. Copyright © 2010 John Wiley & Sons, Ltd.     

Synthesis and characterization of novel polyarylates from 2,5-bis(4-hydroxyphenyl)-3,4-diphenylfuran and aromatic diacid chlorides

New tetraphenylated heterocyclic diol, 2,5-bis(4-hydroxyphenyl)-3,4-diphenylfuran, was synthesized by the oxidative coupling of 4-methoxydeoxybenzoin as a starting material, followed by simultaneous cyclodehydration and demethylation. Tetraphenylfuran-containing polyarylates with inherent viscosities of 0.2–0.7 dL/g were prepared from various diacid chlorides by both solution polycondensation and phase transfer catalyzed two-phase polymerization methods. All the polymers were easily soluble in dichloromethane, o-chlorophenol, 1,4-dioxane, pyridine, and N-methyl-2-pyrrolidone and showed semicrystalline patterns as evidenced by the X-ray diffraction studies. These polyarylates have glass transition temperatures in the range of 222–236°C and 10% weight loss was observed above 430°C in both air and nitrogen.     

Lithographic design of photosensitive polyarylates based on reaction development patterning

The factors affecting pattern‐forming properties in reaction development patterning were examined with polyarylates with various bisphenol moieties. The developability of the photosensitive polyarylates was dependent on the properties of the subtituent (R) in the bisphenol moieties. The development time decreased in the following order: R?C(CH₃)₂ > fluorenyl unit ? phenolphthalein unit > C(CF₃)₂ > SO₂. This order agreed with that of the reactivity between the polyarylates and ethanolamine, and these orders can be explained by pK_a of the bisphenol used to prepare the polyarylates. The development with NH₂? R′? OH resulted in successful positive‐tone pattern formation. However, pattern formation with the developers containing NH₂? R′? OCH₃ was unsuccessful. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 2694–2706, 2006     

Stereoelectronic control of the retro diels–alder reaction in 8-(N-pyrrolidyl)bicyclo[4.3.0]nona-3,7-diene isomers

The cis- and trans-annulated isomers of 8-(N-pyrrolidyl)bicyclo[4.3.0]nona-3,7-diene show different propensities for the retro Diels–Alder fragmentation following electron impact ionization. Molecular ions of the cis-annulated isomer decompose predominantly via the retro Diels–Alder reaction to give [C₉H₁₃N] ⁺· fragments of the appearance energy (AE)=8.45±0.05eV and critical energy E_c=133±8kJ mol^?1. The trans-annulated isomer gives abundant [M–H]⁺ (AE=9.34±0.08eV) and [M–C₆H₆]⁺· fragments, in addition to [C₉H₁₃N]⁺· ions of AE=8.98±0.05eV and E_c=181±8kJ mol^?1. The ionization energies (IE) were determined as IE_cis=7.07±0.05 eV and IE_trans=7.10±0.06eV. The stereochemical information is much less pronounced in unimolecular decompositions of long-lived (metastable) molecular ions which show very similar fragmentation patterns for both geometrical isomers. Nevertheless, the isomers exhibit different kinetic energy release values in the retro Diels–Alder fragmentation; T_0.5=3.8±0.3 and 4.8±0.2 kJ mol^?1 for the cis and trans isomer respectively. Topological molecular orbital calculations indicate that the retro Diels–Alder reaction prefers a two-step path, with a subsequent cleavage of the C(5)? C(6) and C(1)? C(2) bonds. The open-ring distonic intermediate represents the absolute minimum on the reaction energy hypersurface. The cleavage of the C(1)? C(2) bond is the rate-determining step in the decomposition of the cis isomer, with the critical energy calculated as 137 kJ mol^?1. The cleavage of the C(5)? C(6) bond becomes the rate-determining step in the trans-annulated isomer because of stereoelectronic control. The difference in the energy barriers to this cleavage in the isomers (ΔE=95k Jmol^?1) provides a quantitative estimate of the magnitude of the stereoelectronic effect in cation radicals.     

Synthesis and properties of aramids and polyarylates having perfluoro-substituents on the benzene ring

A new series of 16 aramids and 16 polyarylates having perfluoro-substituents on the benzene ring was prepared by a low temperature solution or an interfacial polycondensation. The effects of fluorine substituents on the structure and properties of polymers were examined. Fluorinated aramids exhibited higher crystallinity, while fluorinated polyarylates show lower crystallinity. The melting point (T_m) of aramids decreased with fluorine substitution, whereas T_m of polyarylates from fluorinated aromatic diols was higher than that of those from unfluorinated ones. The temperature of 10% weight loss and the residue at 900°C decreased with fluorine substitution except for the aramids from fluorinated diamines. Solubility and contact angle also increased with fluorine substitution. Some polyarylates were found to exhibit an optical anisotropy.     

Synthesis and Properties of [Ba(CHZ)(BT)(H2O)2]n as a New Energetic Coordination Compound

In order to enhance the thermal stability of the barium salt of 5,5′‐bistetrazole (H₂BT), carbohydrazide (CHZ) was used to build [Ba(CHZ)(BT)(H₂O)₂]_n as a new energetic coordination compound by using a simple aqueous solution method. It was characterized by FT‐IR spectroscopy, elemental analysis, and single‐crystal X‐ray diffraction. The crystal belongs to the monoclinic P2₁/c space group [a = 8.6827(18) Å, b = 17.945(4) Å, c = 7.2525 Å, β = 94.395(2)°, V = 1126.7(4) ų, and ρ = 2.356 g · cm^–3]. The Ba^II cation is ten‐coordinated with one BT^2–, two shared carbohydrazides, and four shared water molecules. The thermal stabilities were investigated by differential scanning calorimetry (DSC) and thermal gravity analysis (TGA). The dehyration temperature (T_dehydro) is at 187 °C, whereas the decomposition temperature (T_d) is 432 °C. Non‐isothermal reaction kinetics parameters were calculated by Kissinger's method and Ozawa's method to work out E_K = 155.2 kJ · mol^–1, lgA_K = 9.25, and E_O = 158.8 kJ · mol^–1. The values of thermodynamic parameters, the peak temperature (while β → 0) (T_p0 = 674.85 K), the critical temperature of thermal explosion (T_b = 700.5 K), the free energy of activation (ΔG^≠ = 194.6 kJ · mol^–1), the entropy of activation (ΔS^≠ = –66.7 J · mol^–1), and the enthalpy of activation (ΔH^≠ = 149.6 kJ · mol^–1) were obtained. Additionally, the enthalpy of formation was calculated with density functional theory (DFT), obtaining Δ_fH°₂₉₈ ≈ 1962.6 kJ · mol^–1. Finally, the sensitivities toward impact and friction were assessed according to relevant methods. The result indicates the compound as an insensitive energetic material.     

The gas-phase pyrolysis of alkyl nitrites VI. t-Amyl nitrite

The rate of decomposition of tert-amyl nitrite (t-AmONO) has been studied in the absence (120°–155°C) and presence (160°–190°C) of nitric oxide. In the absence of nitric oxide for low concentrations of tert-amyl nitrite (～10^?4M) and small extents of reaction (～1%), the first-order homogeneous rates of acetone formation are a direct measure of reaction (1) since k_3a ? k₂(NO): The rate of acetone formation is unaffected by the addition of large amounts of carbon tetrafluoride or isobutane (～1 atm) but is completely suppressed by large amounts of nitric oxide (1 atm 120°–155°C). The rate of reaction (1) is given by k₁ = 10^16.3±0.1 10^?40.3±0.1/θ sec^?1. Since (E₁ + RT) and ΔH°₁ are identical, both may be equated with D(t-AmO – NO) = 40.9 ± 0.1 kcal/mol and E₂ = 0 ± 0.1 kcal/mol. The thermochemistry leads to the result that ΔH°_f (t-AmO) = ?26.6 ± 1 kcal/mol. From ΔS°₁ and A₁, k₂ is calculated to be 10^10.5±^0.2 M^?1·sec^?1. Although the addition of nitric oxide completely suppresses acetone formation at lower temperatures, it reappears at higher temperatures. This is a result of reaction (3a) now competing with reaction (2), thus allowing k_3a to be determined. The rate constant for reaction (3a) is given by k_3a = 10^{14.7 ± 0.2} 10^{?14.3 ± 1}/θ sec^?1. There are two possible routes for the decomposition of the tert-amyloxyl radical: The dominating process is (3a). From the result at 160°C that k_3a/k_3b = 80, we arrive at the result k_3b = 10^15.0–18.7/θ sec^?1. In addition to the products accounted for by the radical split (1), methyl-2-but-1-ene and methyl-2-but-2-ene are produced as a result of the six-centre elimination of nitrous acid (5): The ratio k_5a/k_5b was 0.35. Unlike tert-butyl where the rates of the two paths were comparable [(l) and (5)], here the total rate of the elimination process was only 0.5% that of the radical split (1). The reason for this is not clear.     

Spectrophotometric studies of the formation of charge transfer complex of iron(III) with N,N′-bis(2-pyridylmethylidene)-1,2-diiminoethane di-Schiff base ligand in methanol

The complex formation reaction between N,N′-bis(2-pyridylmethylidene)-1,2-diiminoethane (BPIE) di-Schiff base ligand as an electron donor and iron(III) chloride as an electron acceptor have been studied spectrophometrically in methanol at 28°C. The values of equilibrium constants, K and molar absorptivities, ε were obtained from the Benesi–Hildebrand, Scott and Foster–Hammick–Wardley equations. The results indicate the formation of 1?:?1 charge transfer complex. The absorption band energy of the complex, E _CT, the ionization potential of the BPIE Schiff base ligand, I ^D, and the Gibbs energy changes of the above reaction, ΔG ⁰, were calculated. Finally, the kinetics of the complex formation reaction were studied and was found to be second-order in each reactant. The values of the rate constants of the forward and reverse reactions k ₁ and k _?1 were determined.