Nucleotides. Part XLVI. The synthesis of phospholipid conjugates of antivirally active nucleosides by the improved phosphoramidite methodology

The application of the improved phosphoramidite strategy for the synthese of oligonucleotides using β-eliminating protecting groups to phospholipid chemistry offers the possibility to synthesize phospholipid conjugates of AZT ( 6 ) and cordycepin. The synthesis of 3′-azido-3′-deoxythymidine ( 6 ) was achieved by a new isolation procedure without chromatographic purification steps in an overall yield of 50%. Protected cordycepin ( = 3′-de-oxyadenosine) derivatives, the N⁶,2′-bis[2-(4-nitrophenyl)ethoxycarbonyl]cordycepin ( 12 ) and the N⁶,5′-bis[2-(4-nitrophenyl)ethoxycarbonyl]cordycepin ( 13 ) wre prepared by known methods and direct acylation of N⁶-[2-(4-nitrophenyl)ethoxycarbonyl]cordycepin ( 9 ), respectively. These protected nucleosides and the 3′-azido-3′-de-oxythymidine ( 6 ) reacted with newly synthesized and properly characterized lipid-phosphoramidites 21–25 , catalyzed by 1H-tetrazole, to the corresponding nucleoside-phospholipid conjugates 26–38 in high yield. The deprotection was accomplished via β-elimination with 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) in aprotic solvents to give analytically pure nucleoside-phospholipid diesters 39–51 as triethylammonium or sodium salts. The newly synthesized compounds were characterized by elemental analyses and UV and ¹H-NMR spectra.     

Synthesis and structure of new 3,7-diazabicyclo[3.3.1]nonane derivatives

Aminomethylation of triethylammonium 4-aryl-3,5-dicyano-6-oxo-1,4,5,6-tetrahydropyridin-2-olates and their sulfur and selenium analogs, as well as the structure of formed products, were studied in details. The reaction is of general character and leads to the formation of 7-substituted 9-aryl-2,4-dioxo-, 9-aryl-4-oxo-2-thioxo-, 9-aryl-4-oxo-2-selenoxo-3,7-diazabicyclo[3.3.1]nonane derivatives or their salts. The structures of ethyl 9-(2-chlorophenyl)-5-cyano-7-(4-methylphenyl)-2-oxo-4-thioxo-3,7-diazabicyclo[3.3.1]nonane-1-carboxylate (as a complex with N-methylmorpholine) and triethylammonium salt of 7-benzyl-4-oxo-2-selenoxo-9-(2-thienyl)-3,7-diazabicyclo[3.3.1]nonane-1,5-dicarbonitrile were studied by X-ray crystallography.     

Ab initio Structure Determination of [(Dimethylamino)methylene]bis[phosphonic Acid] Dihydrate from X-Ray Powder Diffraction Data: Comparison with the Corresponding Monohydrate and Unhydrated Form

The structure of [(dimethylamino)methylene]bis[phosphonic acid] dihydrate (C₃H₁₁NO₆P₂⋅2 H₂O; 1 ) was solved ab initio from synchrotron powder X-ray diffraction data. The structure determination was based on direct methods combined with difference Fourier techniques, and the refinement was carried out using the Rietveld method. Using this high-quality diffraction pattern, it was possible to index a second phase which corresponds to the structure of the known [(dimethylamino)methylene]bis[phosphonic acid] monohydrate ( 2 ). [(Dimethylamino)methylene]bis[phosphonic acid] dihydrate ( 1 ) is monoclinic, space group P2₁/c, Z=4, with a=10.6644(1), b=9.1599(1), c=10.5213(1) Å, and β=98.353(1)°. The structure analysis indicates two non-equivalent P-atoms in the molecule of 1 which are also observed in the corresponding monohydrate 2 and unhydrated form 3 . All three compounds exhibit extended H-bonding networks which result in remarkably different ³¹P-NMR spectra. The [(dimethylamino)methylene]bis[phosphonic acids] 1 – 3 crystallize in the betaine-type structure which, therefore, contains two nonequivalent P-atoms. The −P(=O)(OH)₂ and −P(=O)(OH)O⁻ groups of 1 – 3 are involved in a number of strong H-bonds which can be characterized by the different ³¹P-NMR chemical shifts of the two P-atoms of 1 – 3 .     

Sodium and potassium benzeneazophosphonate complexes with crown ethers: Solid-state microwave synthesis, characterization and biological activity

The eco-friendly synthesis, spectroscopic (IR, MS, ¹H and ¹³C NMR) study and biological (cytostatic, antiviral) activity of sodium and potassium benzeneazophosphonate complexes, obtained by reaction in the solid state under microwave irradiation of the alkali salts of ethyl [α-(4-benzeneazoanilino)-N-benzyl]phosphonic acid and [α-(4-benzeneazoanilino)-N-4-methoxybenzyl]phosphonic acid with crown ethers containing 18-membered (dibenzo-18-crown-6 and bis(4′-di-tert-butylbenzo)-18-crown-6), 24-membered (dibenzo-24-crown-8) and 30-membered (dibenzo-30-crown-10) macrocyclic rings, have been described. The simple work-up solvent free reaction is an efficient green procedure for the formation of mononuclear crown ether complexes in which the sodium/potassium ion is bound to oxygen atoms of the macrocycle and the phosphonic acid oxygen. The free crown ethers, alkali benzeneazophosphonate salts and their complexes were evaluated for their cytostatic activity in vitro against murine leukemia L1210, murine mammary carcinoma FM3A and human T-lymphocyte CEM and MT-4 cell lines, as well as for their antiviral activity against a wide variety of DNA and RNA viruses. The investigated compounds showed no specific antiviral activity, whereas all the free crown ethers and their complexes demonstrated cytostatic activity, which was especially pronounced in the case of bis(4′-di-tert-butylbenzo)-18-crown-6 and its complexes.     

Molecular Dynamics Simulation of Interaction between Calcite Crystal and Phosphonic Acid Molecules

The interactions between calcite crystal and seven kinds of phosphonic acids, nitrilotris(methylphosphonic acid) (NTMP), nitrilo‐methyl‐bis(methylphosphonic acid) (NMBMP), N,N‐glycine‐bis(methylphosphonic acid) (GBMP), 1‐ hydroxy‐1,1‐ethylenebis(phosphonic acid) (HEBP), 1‐amino‐1,1‐ethylenebis(phosphonic acid) (AEBP), 1,2‐ethylenediamine‐N,N,N′,N′‐tetrakis(methylphosphonic acid) (EDATMP), and 1,6‐hexylenediamine‐N,N,N′,N′‐tetrakis‐ (methylphosphonic acid) (HDATMP) have been simulated by a molecular dynamics method. The results showed that the binding energy of each scale inhibitor with the (1l?0) (1l?0) face of calcite crystal was higher than that with (104) face, which has been approved by the analysis of pair correlation functions. The sequence of scale inhibition efficiencies for phosphonic acids against calcite scale is as follows: EDATMP>HDATMP>HEBP>NTMP>GBMP>HEBP>NMBMP, and the growth inhibition on the (1l?0) face of calcite was at the leading status. Phosphonic acids deformed during the binding process, and electrovalent bonds formed between the phosphoryl oxygen atoms in phosphonic acids and the calcium ions on calcite crystal.     

Building the “Phosphoindigo” Backbone by Oxidative Coupling of Phosphindolin‐3‐ones with Selenium Dioxide

Oxidative coupling of racemic 1‐ethoxy‐1‐oxophosphindolin‐3‐one ( 1 ) and its 5‐CF₃‐derivative 6 with SeO₂ furnishes 1,1′‐diphosphaindigo derivatives 5 and 7 as bis‐phosphinic esters, i. e. as P^V‐compounds. Like indigo and thioindigo, 5 and 7 exist in the E‐configuration; the crude products of 5 and 7 are mixtures of isomers that are trans‐ and cis‐configurated with respect to the relative orientation of the ester groups oat phosphorus. The structure of the centrosymmetric E‐P(R)P′(S) isomer [(E)‐trans‐isomer] of 5 was determined by X‐ray crystallography. Ester cleavage of 5 , followed by addition of triethylamine to bis‐phosphinic acid 9 (the 1,1,1′,1′‐tetroxide of “phosphoindigo”), furnishes the related bis‐triethylammonium salt 10 as a crystalline hydrate that exhibits an extended hydrogen bonding network.     

Cationic,water‐soluble,fluorene‐containing poly(arylene ethynylene)s: Effects of water solubility on aggregation,photoluminescence efficiency,and amplified fluorescence quenching in aqueous solutions

Three novel fluorene‐containing poly(arylene ethynylene)s with amino‐functionalized side groups were synthesized through the Sonogashira reaction. They were poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐{2,5‐bis[3′‐(N,N‐diethylamino)‐1′‐oxapropyl]‐1,4‐phenylene} ( P1 ), poly{9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene} ( P2 ), and poly({9,9‐bis[6′‐(N,N‐diethylamino)hexyl]‐2,7‐fluorenylene ethynylene}‐alt‐co‐(1,4‐phenylene)) ( P3 ). Through the postquaternization treatment of P1 – P3 with methyl iodide, we obtained their cationic water‐soluble conjugated polyelectrolytes (WSCPs): P1′ – P3′ . The water solubility was gradually improved from P3′ to P1′ with increasing contents of hydrophilic side chains. After examining the ultraviolet–visible absorption and photoluminescence (PL) spectra, fluorescence lifetimes, and dynamic light scattering data, we propose that with the reduction of the water solubility from P1′ to P3′ , they exhibited a gradually increased degree of aggregation in H₂O. The PL quantum yields of P1′ – P3′ in H₂O displayed a decreasing tendency consistent with the increased degree of aggregation, suggesting that the pronounced degree of aggregation was an important reason for the low PL quantum yields of WSCPs in H₂O. Two structurally analogous water‐soluble trimers of P2′ and P3′ , model compounds 2,7‐bis(9″,9″‐bis{6‴‐[(N,N‐diethyl)‐N‐methylammonium] hexyl}‐2″‐fluorenylethynyl)‐9,9‐bis{6′‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}fluorene hexaiodide and 1,4‐bis(9′,9′‐bis{6″‐[(N,N‐diethyl)‐N‐methylammonium]hexyl}‐2′‐fluorenylethynyl)benzene tetraiodide, were synthesized. The amplified fluorescence quenching of these WSCPs by Fe(CN)₆⁴⁻ in H₂O was studied by comparison with a corresponding analogous trimer. The effects of aggregation on the fluorescence quenching may be two‐edged in these cases. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5778–5794, 2006     

Acrylate based anticorrosion films using novel bis‐phosphonic methacrylates

Two novel phosphonated methacrylate monomers were successfully synthesized and subsequently incorportated into adhesion/anticorrosive coatings. Specifically, they were propyl N,N‐tetramethyl‐bis(phosphonate)‐2‐hydroxyl‐bis(methylene) amine methylmethacrylate (MAC₃NP₂) and 2‐[2,2‐bis(diisopropoxyphosphoryl)ethoxy]‐methylmethacrylate, (MAC₃P₂). The phosphonic forms of each monomer were blended with ～85% w.w acrylates (tripropyleneglycol‐diacrylate and hexanediol‐diacrylate) and 6% w.w of the photo sensitive initiator Darocur®. Along with a monophosphonic monomer synthesized in a previous publication (MAC₃P), they were polymerized on Q‐panels under ultraviolet light, and then subject to the salt spray test (ca. 0.5 mol/L NaCl at 35 °C) for a duration of up to 50 days. The results indicate that acrylate blends with low concentration of the bisphosphonic compound MAC₃P₂ have excellent resistance to corrosion, thus excellent adhesive properties. Importantly, these coatings were formed without the use of a hydrophobic polymer matrix or solvents. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 7972–7984, 2008     

Ring‐opening metathesis polymerization of amino acid‐functionalized norbornene derivatives

Amino acid‐derived novel norbornene derivatives, N,N′‐(endo‐bicyclo[2.2.1] hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐alanine methyl ester (NBA), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐leucine methyl ester (NBL), N,N′‐(endo‐bicyclo[2.2.1]hept‐5‐en‐2,3‐diyldicarbonyl) bis‐L ‐phenylalanine methyl ester (NBF) were synthesized and polymerized using the Grubbs 2nd generation ruthenium (Ru) catalyst. Although NBA, NBL, and NBF did not undergo homopolymerization, they underwent copolymerization with norbornene (NB) to give the copolymers with M_n ranging from 5200 to 38,100. The maximum incorporation ratio of the amino acid‐based unit was 9%, and the cis contents of the main chain were 54–66%. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5337–5343, 2006     

The reactions of some pyranylideneiminium salts with amines. Part 1

The iminium salt, N,N-dimethyl-N-[2-(2,6-diphenyl-4H-pyran-4-ylidene)ethylidene]iminium perolilorate ( 1 ), reacts with secondary amines, such as piperidine, by exchanging the dimethyl-amino function for a piperidine. Primary amines react with 1 to give 1-alkyl-2-phenyl-4-phenacylidene-1,4-dihydropyridines. The bisiminium salt, N,N,N',N' -tetramethyI-N,N'-[2-(2,6-diphenyl-4H-pyran-4-ylidene)-1,3-propanediylidene]bis(iminium perchlorate) ( 2 ), reacts with ammonia to give 3,6-diphenylcopyrine and with primary amines to give the corresponding N,N' -dialkyl quaternary copyrines. The salt 2 reacts with secondary amines with exchange of the dimethylamino groups of 2 by the secondary arnine and addition of the amine at the 2-position of the pyran ring.     

Synthesis of 3,3′-(1,6-hexanediyl)bis-pyrimidine derivatives and 3,4-dithia[6.6](1.3)pyrimidinophane

Several 3,3′-(1,6-hexanediyl)bis[6-methyl-2,4(1H,3H)-pyrimidinedione] derivatives ( 4a, 4b , and 4c ) were synthesized from 1,6-(hexanediyl)bis[6-methyl-2H-1,3-oxazine-2,4(3H)-dione] (3) . Compound 4c was converted to 6, which reacted with thiourea giving thiuronium salt 7 . 3,3′-(1,6-Hexanediyl)bis [1-(2-mercaptoethyl)-6-methyl-2,4(1H,3H)-pyrimidinedione] (9) was obtained by the hydrolysis of 7 , and then 9 was oxidized to 12,22-dimethyl-3,4-dithia[6.6] (1.3)-1,2,3,4-tetrahydro-2,4-dioxopyrimidinophane (10) .     

The Synthesis of 1,4‐Bis[N‐(4/6‐Substituted Benzothiazole‐2‐yl)‐N′‐Glycosylguanidino]Benzenes

The starting material O‐protected glycosyl isothiocyanate ( 1?3 ) was refluxed with 1,4‐diaminobenzene in CHCl₃ under nitrogen atmosphere to give 1,4‐bis(N‐glycosyl)thioureidobenzene ( 4?6 ). Then 1,4‐bis[N‐(4/6‐substituted benzothiazole‐2‐yl)‐N′‐glycosylguanidino]benzenes ( 8a?8e , 9a?9e , 10a?10e ) were obtained in good yield by reaction of compounds ( 4?6 ) with 2‐amino‐4/6‐benzothizoles ( 7a?7e ) and HgCl₂ in the presence of TEA in DMF. The structures of all 18 new compounds were confirmed by IR, ¹H NMR, LC‐MS and elemental analysis. The bioactivity of anti‐HIV‐1 protease (HIV‐1 PR) and against angiotensin converting enzyme (ACE) have been evaluated.     

Allgemeiner Zugang zu Polyaminen mit Ethan-1,2-diamin-Einheiten: Synthese von nicht natürlich vorkommenden homologen und isomeren N1,4-Di(4-cumaroyl)sperminen

█tl="American"█The synthesis of the three N,N′-di(4-coumaroyl)tetramines, i.e., of (E,E)-N-{3-[(2-aminoethyl)amino]propyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1a ), (E,E)-N-{4-[(2-aminoethyl)amino]butyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1b ), and (E,E)-N-{6-[(2-aminoethyl)amino]hexyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(ethane-1,2-diyl)bis[prop-2-enamide] ( 1c ), is described. It proceeds through stepwise construction of the symmetric polyamine backbone including protection and deprotection steps of the amino functions. Their behavior on TLC in comparison with that of 1,4-di(4-coumaroyl)spermine (=(E,E)-N-{4-[(3-aminopropyl)amino]butyl}-3,3′-bis(4-hydroxyphenyl)-N,N′-(propane-1,3-diyl)bis[prop-2-enamide]; 2 ) is discussed.     

A New Iterative Approach for the Synthesis of Oligo(phenyleneethynediyl) Derivatives and Its Application for the Preparation of Fullerene?Oligo(phenyleneethynediyl) Conjugates as Active Photovoltaic Materials

Disymmetrically substituted oligo(phenyleneethynediyl) (OPE) derivatives were prepared from 2,5‐bis(octyloxy)‐4‐[(triisopropylsilyl)ethynyl]benzaldehyde ( 5 ) by an iterative approach using the following reaction sequence: i) Corey–Fuchs dibromoolefination, ii) treatment with an excess of lithium diisopropylamide, and iii) a metal‐catalyzed cross‐coupling reaction of the resulting terminal alkyne with 2,5‐diiodo‐1,4‐bis(octyloxy)benzene ( 3 ) (Schemes 2 and 3). Reaction of the OPE dimer 8 and trimer 13 thus obtained with N‐methylglycine and C₆₀ in refluxing toluene gave the corresponding C₆₀? OPE conjugates 16 and 17 , respectively (Scheme 4). On the other hand, treatment of the protected terminal alkynes 8 and 13 with Bu₄N followed by reaction of the resulting 9 and 14 with 4‐iodo‐N,N‐dibutylaniline under Sonogashira conditions yielded 10 and 15 , respectively (Schemes 2 and 3). Subsequent treatment with N‐methylglycine and C₆₀ in refluxing toluene furnished the C₆₀? OPE derivatives 18 and 19 (Scheme 4). Compound 9 was also subjected to a Pd‐catalyzed cross‐coupling reaction with 3 to give the centrosymmetrical OPE pentamer 20 (Scheme 5). Subsequent reduction followed by reaction of the resulting diol 21 with acid 22 under esterification conditions led to bis‐malonate 23 . Oxidative coupling of terminal alkyne 14 with the Hay catalyst gave bis‐aldehyde 24 (Scheme 6). Treatment with diisobutylaluminium hydride followed by dicylcohexylcarbodiimide‐mediated esterification with acid 22 gave bis‐malonate 26 . Finally, treatment of bis‐malonates 23 and 26 with C₆₀, I₂, and 1,8‐diazabicylco[5.4.0]undec‐7‐ene (DBU) in toluene afforded the bis[cyclopropafullerenes] 27 and 28 , respectively (Scheme 7). The C₆₀ derivatives 16 – 19, 27 , and 28 were tested as active materials in photovoltaic devices. Each C₆₀? OPE conjugate was sandwiched between poly(3,4‐ethylenedioxythiophene)‐poly(styrenesulfonate)‐covered indium tin oxide and aluminium electrodes. Interestingly, the performances of the devices prepared from the N,N‐dialkylaniline‐terminated derivatives 18 and 19 are significantly improved when compared to those obtained with 16, 17, 27 , and 28 , thus showing that the efficiency of the devices can be significantly improved by increasing the donor ability of the OPE moiety.     

Monodentate and bridging behaviour of the sulfur‐containing ligand 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine in two discrete zinc(II) complexes with acetylacetonate

The Zn complexes bis(acetylacetonato‐κ²O,O′)bis{4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κN¹}zinc(II), [Zn(C₅H₇O₂)₂(C₂₂H₁₇N₃S)₂], (I), and {μ‐4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine‐κ²N¹:N^1′′}bis[bis(acetylacetonato‐κ²O,O′)zinc(II)], [Zn₂(C₅H₇O₂)₄(C₂₂H₁₇N₃S)], (II), are discrete entities with different nuclearities. Compound (I) consists of two centrosymmetrically related monodentate 4′‐[4‐(methylsulfanyl)phenyl]‐4,2′:6′,4′′‐terpyridine (L1) ligands binding to one Zn^II atom sitting on an inversion centre and two centrosymmetrically related chelating acetylacetonate (acac) groups which bind via carbonyl O‐atom donors, giving an N₂O₄ octahedral environment for Zn^II. Compound (II), however, consists of a bis‐monodentate L1 ligand bridging two Zn^II atoms from two different Zn(acac)₂ fragments. Intra‐ and intermolecular interactions are weak, mainly of the C—H...π and π–π types, mediating similar layered structures. In contrast to related structures in the literature, sulfur‐mediated nonbonding interactions in (II) do not seem to have any significant influence on the supramolecular structure.     

Trifluoromethyl‐Substituted Conjugated Oligoelectrolytes

Conjugated oligoelectrolytes (COEs) are being introduced into a variety of optical and electronic technologies, yet the dependence of their properties as a function of molecular structure remains poorly understood. In response, we designed, synthesized, and examined a new tetracationic COE, namely, 1,4‐bis{9′,9′‐bis[6′′‐(N,N,N‐trimethylammonium)hexyl]‐2′‐fluorenyl}‐2,5‐bis(trifluoromethyl)benzene tetrabromide (FPF‐F6), which contains bulky electron‐withdrawing trifluoromethyl groups, and compared its properties with the unsubstituted counterpart 1,4‐bis{9′,9′‐bis[6′′‐(N,N,N‐trimethylammonium)hexyl]‐2′‐fluorenyl}benzene tetrabromide (FPF). The ground‐state geometry of FPF‐F6 is primarily twisted with little electronic communication between the aromatic units, as confirmed by single‐crystal X‐ray diffraction studies of the neutral precursor. However, absorption and photoluminescence spectroscopies reveal that the excited state of FPF‐F6 displays strong intramolecular charge‐transfer characteristics. Solution AFM in aqueous media shows that introduction of trifluoromethyl groups changes the size and aspect ratio of supramolecular aggregates that are brought together as a result of hydrophobic interactions. Furthermore, addition of ssDNA to FPF‐F6 leads to interoligoelectrolyte complexes wherein the backbone is more planar; the environment the chromophore experiences under these conditions is also considerably less polar. These findings provide considerable insight into the complex photophysics of electronically conjugated materials in aqueous media.     

Conformational isomers of the [(5‐methyl‐2‐pyridinio)aminomethylene]diphosphonate dianion and [(5‐methyl‐2‐pyridyl)aminomethylene]diphosphonate trianion in salts with 4‐aminopyridine and ammonia

The crystal structures of two salts, products of the reactions between [(5‐methyl‐2‐pyridyl)aminomethylene]bis(phosphonic acid) and 4‐aminopyridine or ammonia, namely bis(4‐aminopyridinium) hydrogen [(5‐methyl‐2‐pyridinio)aminomethylene]diphosphonate 2.4‐hydrate, 2C₅H₇N₂⁺·C₇H₁₀N₂O₆P₂²⁻·2.4H₂O, (I), and triammonium hydrogen [(5‐methyl‐2‐pyridyl)aminomethylene]diphosphonate monohydrate, 3NH₄⁺·C₇H₉N₂O₆P₂³⁻·H₂O, (II), have been determined. In (I), the Z configuration of the ring N—C and amino N—H bonds of the bisphosphonate dianion with respect to the C_ring—N_amino bond is consistent with that of the parent zwitterion. Removing the H atom from the pyridyl N atom results in the opposite E configuration of the bisphosphonate trianion in (II). Compound (I) exhibits a three‐dimensional hydrogen‐bonded network, in which 4‐aminopyridinium cations and water molecules are joined to ribbons composed of anionic dimers linked by O—H...O and N—H...O hydrogen bonds. The supramolecular motif resulting from a combination of these three interactions is a common phenomenon in crystals of all of the Z‐isomeric zwitterions of 4‐ and 5‐substituted (2‐pyridylaminomethylene)bis(phosphonic acid)s studied to date. In (II), ammonium cations and water molecules are linked to chains of trianions, resulting in the formation of double layers.     

meso‐3,5‐Bis(trifluoromethyl)phenyl‐Substituted Expanded Porphyrins: Synthesis,Characterization, and Optical,Electrochemical, and Photophysical Properties

Trifluoroacetic acid‐catalyzed condensation of pyrrole with electron‐deficient and sterically hindered 3,5‐bis(trifluoromethyl)benzaldehyde results in the unexpected production of a series of meso‐3,5‐bis(trifluoromethyl)phenyl‐substituted expanded porphyrins including [22]sapphyrin 2 , N‐fused [22]pentaphyrin 3 , [26]hexaphyrin 4 , and intact [32]heptaphyrin 5 together with the conventional 5,10,15,20‐tetrakis(3,5‐bis(trifluoromethyl)phenyl)porphyrin 1 . These expanded porphyrins are characterized by mass spectrometry, ¹H NMR spectroscopy, UV/Vis/NIR absorption spectroscopy, and fluorescence spectroscopy. The optical and electrochemical measurements reveal a decrease in the HOMO–LUMO gap with increasing size of the conjugated macrocycles, and in accordance with the trend, the deactivation of the excited singlet state to the ground state is enhanced.     

Effect of Functionalized Groups on Gas‐Adsorption Properties: Syntheses of Functionalized Microporous Metal–Organic Frameworks and Their High Gas‐Storage Capacity

The microporous metal–organic framework (MMOF) Zn₄O(L1)₂ ? 9 DMF ? 9 H₂O ( 1‐H ) and its functionalized derivatives Zn₄O(L1‐CH₃)₂ ? 9 DMF ? 9 H₂O ( 2‐CH₃ ) and Zn₄O(L1‐Cl)₂ ? 9 DMF ? 9 H₂O ( 3‐Cl ) have been synthesized and characterized (H₃L1=4‐[N,N‐bis(4‐methylbenzoic acid)amino]benzoic acid, H₃L1‐CH₃=4‐[N,N‐bis(4‐methylbenzoic acid)amino]‐2‐methylbenzoic acid, H₃L1‐Cl=4‐[N,N‐bis(4‐methylbenzoic acid)amino]‐2‐chlorobenzoic acid). Single‐crystal X‐ray diffraction analyses confirmed that the two functionalized MMOFs are isostructural to their parent MMOF, and are twofold interpenetrated three‐dimensional (3D) microporous frameworks. All of the samples possess enduring porosity with Langmuir surface areas over 1950 cm² g^?1. Their pore volumes and surface areas decrease in the order 1‐H > 2‐CH₃ > 3‐Cl . Gas‐adsorption studies show that the H₂ uptakes of these samples are among the highest of the MMOFs (2.37 wt % for 3‐Cl at 77 K and 1 bar), although their structures are interpenetrating. Furthermore, this work reveals that the adsorbate–adsorbent interaction plays a more important role in the gas‐adsorption properties of these samples at low pressure, whereas the effects of the pore volumes and surface areas dominate the gas‐adsorption properties at high pressure.     

Anode interlayer in organic photovoltaics: Narrow bandgap small molecular materials as exciton‐blocking layer

Six materials were used as an interlayer at the anode side (anode interlayer [AIL]) of an archetypical planar heterojunction organic solar cell (OSC). In addition to two conventional wide bandgap hole transport materials (HTMs), tris(4‐carbazol‐9‐ylphenyl)amine ( TCTA ) and trans‐4,4′‐bis[N‐(naphthalen‐1‐yl)‐N‐phenylamino]stilbene ( NPAE ), we explore four narrow bandgap materials, bis(biphenylaminospiro)‐fumaronitrile ( PhSPFN ), bis(N‐(naphthalen‐1‐yl)‐N‐phenylamino)anthraquinone ( NPAAnQ ), bis‐(di(2‐fluorophenyl)aminospiro)‐fumaronitrile ( FPhSPFN ), and bis[4‐(N‐(pyren‐1‐yl)‐N‐phenylamino)phenyl]fumaronitrile ( PyPAFN ), the energy levels of which essentially align with the ones of SubPc, the active light‐absorbing material of the OSC study herein. By using a narrow bandgap AIL, universally enhanced short‐circuit current density and power conversion efficiencies (PCEs) have been achieved. In addition, one of these materials, FPhSPFN , results in a PCE of 5.13%, which is the highest reported value for SubPc solar cells with a similar architecture. This is ascribed to the formation of an otherwise passive exciton‐blocking interface. Furthermore, this demonstrates that charge selectivity by way of a high‐lying lowest unoccupied molecular orbital (LUMO) energy level is not a prerequisite for successful AIL design. As such, in terms of energy level alignment and bandgap energies, we establish a viable alternative approach toward interface and interlayer material design.