Simultaneous determination of celecoxib, meloxicam, and rofecoxib using capillary electrophoresis with surfactant and application in drug formulations

A simple and selective CE using surfactant with UV detection is described for the simultaneous determination of selective cyclooxygenase-2 inhibitors, celecoxib, meloxicam, and rofecoxib. The simultaneous analysis of celecoxib, meloxicam, and rofecoxib was performed in Tris buffer (10 mM; pH 11) with 60 mM sodium octane-sulfonate and 20% ACN as an anionic surfactant and organic modifier, respectively. Under this condition, good separation with high efficiency and the required short analysis time is achieved. The linear ranges of the method for the determination of celecoxib, meloxicam, and rofecoxib were over 5-100 microg/mL; the detection limits at 200 nm (S/N = 3; injection 3.45 kPa, 5 s) were 2, 1, and 1 microg/mL, respectively. The small amount of sample required and the expeditiousness of the procedure allow content uniformity to be determined in individual pharmaceutical products.     

Simultaneous separation of ergot alkaloids by capillary electrophoresis after cloud point extraction from cereal samples

A new and sensitive analytical methodology for ergot alkaloids (EA) determination from cereal samples based on cloud point extraction (CPE) prior to CE‐UV absorbance was developed. The methodology involves extraction under acid conditions and subsequent preconcentration by applying a simple, rapid and environmentally friendly low volume surfactant extraction procedure. After extraction, CE analysis was carried out by performing dilutions on preconcentrated surfactant rich phase, achieving a single peak or simultaneous alkaloids determination. A real preconcentration factor of 22 of total EA was obtained, demonstrating the efficiency of this methodology. The limits of detection were 2.6 and 2.2 μg/kg for ergotamine and ergonovine, respectively. Validation procedure revealed suitable linearity, accuracy and precision. The average extraction and clean‐up recoveries were compared with the theoretical values and were better than 92%. This method was successfully applied to the determination of EA in different varieties of commercial flour samples, two grain samples and one of the leading brands cereal‐based product for infant feeding. The high sensitivity achieved for EA determinations in real samples suggests CPE procedure as an interesting approach to improve CE‐UV visible detection limits. Moreover, the whole process could be considered as a contribution to green chemistry because nonorganic solvents were involved, demonstrating its great potential over conventional techniques.     

Capillary electrophoresis of high-molecular chitosan: the natural carbohydrate biopolymer

Due to its high resolving power and diverse application range, capillary electrophoresis (CE) has been successfully applied to the analysis of carbohydrates. In this paper, a method for the determination of high-molecular chitosan (Mr 200,000) using CE is presented. We studied the optimal condition of buffer pH and type, and column type for determination of chitosan. Optimal CE performance was found when employing 100 mM triethylamine (TEA)-phosphate buffer, pH 2.0 and untreated fused-silica capillary (50 microm x 27 cm) for the chitosan analysis. Under optimum conditions, excellent linear responses were obtained in the concentration range of 1.25-20 microM, with a linear correlation coefficient of 0.9983. The standard deviations of the migration time and peak area were found to be 2.5 and 6.4%, respectively. This method could be readily applied to chitosan determination in real biological samples and commercial products.     

Use of phosphobetaine-type zwitterionic surfactant for the determination of alkali and alkaline earth metal ions and ammonium ion in human saliva by capillary electrophoresis

With conventional capillary electrophoresis (CE), it was difficult to directly analyze samples containing proteins as a result of the irreversible adsorption of proteins onto the inner surface of the capillary column. This difficulty, however, was completely overcome by adding N-dodecylphosphocholine (DPC, a phosphobetaine-type zwitterionic surfactant) to the background electrolyte (BGE). DPC made two essential contributions to the determination of common inorganic cations in the protein-containing samples: protein adsorption onto the capillary walls was completely avoided, and the resolution of the analyte cations was essentially improved. The optimal BGE for analysis of biological samples was found to be 5 mM DPC, 5 mM copper(II) acetate/10 mM ethylenediamine (pH 8). The detection limits (signal-to-noise ratio =3 and UV at 215 nm) of sodium, potassium, calcium, magnesium, and ammonium ions were 25, 31, 24, 45, and 60 micro M, respectively. These five species of the common inorganic cations in human saliva samples were detected successfully within 2 min by the proposed system with direct sample injection.     

Determination of aristolochic acid in Chinese herbal medicine by capillary electrophoresis with laser-induced fluorescence detection

We have demonstrated the analysis of aristolochic acids (AAs) that are naturally occurring nephrotoxin and carcinogen by capillary electrophoresis in conjunction with laser-induced fluorescence detection (CE-LIF). Owing to lack of intrinsic fluorescence characteristics of oxidized AAs (OAAs), reduction of the analytes by iron powder in 10.0 mM HCl is required prior to CE analysis. The reduced AAs (RAAs) exhibit fluorescence at 477 nm when excited at 405 nm using a solid-state blue laser. By using 50.0 mM sodium tetraborate (pH 9.0) containing 10.0 mM SDS, the determination of AA-I and AA-II by CE-LIF has been achieved within 12 min. The CE-LIF provides the LODs of 8.2 and 5.4 nM for AA-I and AA-II, respectively. The simple CE-LIF method has been validated by the analysis of 61 Chinese herbal samples. Prior to CE analysis, OAAs were extracted by using 5.0 mL MeOH, and then the extracts were subjected to centrifugation at 3,000 rpm for 5 min. After reduction, extraction, and centrifugation, the supernatants were collected and subjected to CE analysis. Of the 61 samples, 14 samples contain AA-I and AA-II, as well as 10 samples contain either AAI or AAII. The relative standard deviation (RSD) values of the migration times for AA-I and AA-II are less than 2.5% and 2.1% for three consecutive measurements of each sample. The RSD values for the peak heights corresponding to AA-I and AA-II in most samples are about 8.0% and 10.0%, respectively. The result shows that the present CE-LIF approach is sensitive, simple, efficient, and accurate for the determination of AAs in real samples.     

Micro solid‐phase derivatization analysis of low‐molecular mass aldehydes in treated water by micellar electrokinetic chromatography

A MEKC method was developed for the determination of aliphatic and aromatic low‐molecular mass aldehydes (LMMAs) in treated water samples. The method involves the precapillary derivatization and extraction of the aldehydes on a Telos?ENV μ‐SPE column impregnated with 2,4‐dinitrophenylhydrazine . After elution of the hydrazones with ACN, the derivatives were analyzed using MEKC–DAD. Resolution of the MEKC procedure was studied by changing the pH and the concentration of the buffer, the type, and the concentration of surfactant, and the organic modifier content in the BGE. A running buffer consisting of a phosphate buffer (pH 7.2, 75 mM) with CTAB (50 mM) and ACN (30%) gave the best results. Linearity was established over the concentration range 0.5–500 μg/L and LODs from 65 to 775 ng/L; the interday precision was expressed as the RSD of the aldehydes ranging from 6.6 to 8.4%. Matrix effects were shown to be negligible by comparing the response factors obtained in ultrapure and treated waters. Aldehydes were readily determined at 1.1–8.4 μg/L levels in ozonated and chlorinated water samples, the method proposed being the first CE contribution developed for the systematic analysis of both aliphatic and aromatic LMMAs in water samples.     

Determination of copper and iron using [S,S']-ethylenediaminedisuccinic acid as a chelating agent in wood pulp by capillary electrophoresis.

A capillary electrophoresis (CE) method is described for the simultaneous determination of copper and iron after complexation with a readily biodegradable chelating agent, [S,S']-ethylenediaminedisuccinic acid (EDDS), in wood pulp. CE separation was performed in a fused-silica capillary (50 microm i.d.; total length, 65 cm) with an electrolyte containing 25 mM borate buffer and 0.5 mM CTAB at pH 7.0 and an applied voltage of -25 kV. The samples were introduced by applying a 50 mbar pressure for 2 s, and detection of the complexes was monitored at 245 nm. The methodology performance of the methods was evaluated in terms of the linearity, limit of detection (LOD), limit of quantitation (LOQ) and reproducibility. The applicability of the method was demonstrated for the analysis of copper and iron in wood pulp.     

Urtica dioica agglutinin: separation, identification, and quantitation of individual isolectins by capillary electrophoresis and capillary electrophoresis-mass spectrometry

With benign prostatic hyperplasia (BPH) being a major health problem in ageing men, alternative therapeutic approaches (e.g., with phytopharmaceuticals) are of great interest. Based on pharmacological evidences, one of the most promising options in that respect are the lectins found in Urtica dioica (stinging nettle) roots. In this study the qualitative and quantitative analysis of individual isolectins in U. dioica extracts is described, which is the first report on using capillary electrophoresis (CE) for the analysis of lectins in plant material at all. By utilizing a 200 mM sodium acetate buffer (pH 3.75) a baseline separation and determination of four closely related isolectins was feasible within 20 min in the aqueous plant extracts. The individual compounds were identified based on reference compounds as well as data obtained from CE-mass spectrometry (MS) experiments. After modifying the optimized CE conditions to 100 mM ammonium formate buffer with pH 3.75 and a voltage of 15 kV, the isolectins were clearly assignable in positive electrospray ionization (ESI) mode. The quantitative results obtained by CE (the total lectin content varied from 0 to 0.42% in the samples) were accurate (recovery rates of spiked samples between 92.5 and 96.2%), precise (relative standard deviation < 5%) and in good agreement to those obtained by High-performance liquid chromatography (HPLC). As for peak resolution, assignable compounds and required separation time the newly developed CE method was clearly advantageous over the determination achieved by LC.     

Speciation of organomercurials in marine samples using capillary electrophoresis

A rapid method for speciation and determination of organomercury compounds in biological samples of marine origin using Capillary Electrophoresis (CE) is reported. Organomercurials were extracted from the samples by means of the classical West?? procedure thus giving organomercury-cysteine complexes which can be separated from each other by means of CE resulting in effective speciation. Electrophoretic separation was achieved in an open silica capillary tube at 15-18 kV using a 100mM sodium borate buffer (pH 8.35). All mercury species were distinctively separated within 12 min. Results are presented for the analysis of real marine samples and reference materials, and compared with those obtained by the GC commonly accepted procedure.     

Trace determination of short-chain aliphatic amines in biological samples by micellar electrokinetic capillary chromatography with laser-induced fluorescence detection

In this study, a new capillary electrophoresis (CE) method is described originally for the sensitive and selective determination of short-chain aliphatic amines in biological samples. These amines were converted into their N-hydroxysuccinimidyl fluorescein-O-acetate (SIFA) derivatives and measured by micellar electrokinetic capillary chromatography with laser-induced fluorescence detection. The derivatization conditions and separation parameters for the aliphatic amines were optimized in detail. The SIFA-labeled amines were fully separated within 8.5 min using 25 mM pH 9.6 boric acid electrolyte containing 60 mM sodium dodecyl sulfate (SDS). The parameters of validation such as linearity of response, precision and detection limits were determined. The detection limits were obtained in the range from 0.02 to 0.1 nM, which was the lowest value reported by CE methods. The developed method was successfully employed to monitor aliphatic amines in serum and cells samples. After comparison of other CE methods using different fluorescent probes, the present method represents a powerful tool for the trace determination of aliphatic amines in complex biological samples.     

Systematic parameter screening for capillary electrophoresis monitoring of surfactants on silicon wafer surfaces by designed experiments

The surface purity of silicon wafers is an important parameter to monitor for yield improvement of semiconductor devices in a production line. Surfactants are used to reduce the surface potential in order to facilitate the removal or cleaning of particles and metals. Traces of surfactant residues from the cleaning bath may still be present on the wafer surface after the final cleaning step. In this report, two capillary electrophoresis (CE) methods for the analysis of dodecylbenzene sulfonate (DBS) are developed for monitoring the surfactant residues in the wafer manufacturing process. One method is developed for the sensitive determination of all DBS homologues and isomers in one single peak. Another method is developed for the fingerprint analysis of the homologues and isomers of DBS. The Taguchi methodology was used as a systematic optimization tool for the DBS analysis by CE. The experiments were evaluated by calculating the signal-to-noise ratio values with four responses. The lowest detection limit for DBS was 15 microg/L at 95% confidence level. The percent recovery of surfactant was between 90% and 110%.     

Determination of amino acids in urine by cyclodextrin-modified capillary electrophoresis-laser-induced fluorescence detection

Capillary electrophoresis (CE) combined with laser-induced fluorescence detection is applied to the determination of amino acids in urine samples. The urine samples are first ultrafiltered, to remove proteins and large peptides, and the filtrates are then directly labeled by reaction with fluorescein isothiocyanate (FITC). Cyclodextrin-modified CE using alpha-cyclodextrin is employed for the separation of the FITC-labeled amino acids. Seven amino acids are clearly separated from side reaction products produced during the labeling reaction, when an 80mM borate buffer containing 45mM alpha-cyclodextrin is used as the running buffer. For quantitative analysis, rhodamine B is added to the labeled urine samples as an internal standard. The calibration curves for phenylalanine, glutamine, proline, glycine, serine, alanine, and valine are linear in the range of 10microM to 100microM. The concentration limits of detection for all of the amino acids are estimated to be 160~330nM. Conversely, the limit of quantitation (LOQ) was ~10microM and the limitations are due to the labeling efficiency rather than the sensitivity of the detector. Three amino acids in urine samples, glutamine, glycine, and alanine, are readily quantitated, while the concentrations of the others are below the LOQ. The present method would permit the determination of seven amino acids in urine successfully.     

Determination of ethyl sulfate--a marker for recent ethanol consumption--in human urine by CE with indirect UV detection

A CE method for the determination of the ethanol consumption marker ethyl sulfate (EtS) in human urine was developed. Analysis was performed in negative polarity mode with a background electrolyte composed of 15 mM maleic acid, 1 mM phthalic acid, and 0.05 mM cetyltrimethylammonium bromide (CTAB) at pH 2.5 and indirect UV detection at 220 nm (300 nm reference wavelength). This buffer system provided selective separation conditions for EtS and vinylsulfonic acid, employed as internal standard, from urine matrix components. Sample pretreatment of urine was minimized to a 1:5 dilution with water. The optimized CE method was validated in the range of 5-700 mg/L using seven lots of urine. Intra- and inter-day precision and accuracy values, determined at 5, 60, and 700 mg/L with each lot of urine, fulfilled the requirements according to common guidelines for bioanalytical method validation. The application to forensic urine samples collected at autopsies as well as a successful cross-validation with a LC-MS/MS-based method confirmed the overall validity and real-world suitability of the developed expeditious CE assay (sample throughput 130 per day).     

Quality evaluation of Guan‐Xin‐Ning injection based on fingerprint analysis and simultaneous separation and determination of seven bioactive constituents by capillary electrophoresis

The purpose of this study was to develop a comprehensive, rapid and practical capillary electrophoresis (CE) method for quality control (QC) of Guan‐Xin‐Ning (GXN) injection based on fingerprint analysis and simultaneous separation and determination of seven constituents. In fingerprint analysis, a capillary zone electrophoresis (CZE) method with a running buffer of 30 mM borate solution (pH 9.3) was established. Meanwhile, ten batches of samples were used to establish the fingerprint electropherogram and 34 common peaks were obtained within 20 min. The RSD of relative migration times (RMT) and relative peak areas (RPA) were less than 5%. In order to further evaluate the quality of GXN injection, a micellar electrokinetic chromatography (MEKC) method was developed for simultaneous separation and determination of bioactive constituents. Seven components reached baseline separation with a running buffer containing 35 mM SDS and 45 mM borate solution (pH 9.3). A good linearity was obtained with correlation coefficients from 0.9906 to 0.9997. The LOD and LOQ ranged from 0.12 to 1.50 μg/mL and from 0.40 to 4.90 μg/mL, respectively. The recoveries ranged between 99.0 and 104.4%. Therefore, it was concluded that the proposed method can be used for full‐scale quality analysis of GXN injection.     

Analytical potential of 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein for the determination of amino compounds by capillary electrophoresis with laser-induced fluorescence detection

The analytical potential of a fluorescein analogue, 6-oxy-(N-succinimidyl acetate)-9-(2'-methoxycarbonyl) fluorescein (SAMF), for the first time synthesized in our laboratory, as a labeling reagent for the labeling and determination of amino compounds by capillary electrophoresis (CE) with laser-induced fluorescence (LIF) detection was investigated. Biogenic monoamines and amino acids were chosen as model analytes to evaluate the analytical possibilities of this approach. The derivatization conditions and separation parameters for the biogenic amines were optimized in detail. The derivatization was performed at 30 degrees C for 6 min in boric acid buffer (pH 8.0). The derivatives were baseline-separated in 15 min with 25 mM boric acid running buffer (pH 9.0), containing 24 mM SDS and 12.5% v/v acetonitrile. The concentration detection limit for biogenic amines reaches 8 x 10(-11) mol.L(-1) (signal-to-noise ratio = 3). The application of CE in the analysis of the SAMF-derivatized amino acids was also exploited. The optimal running buffer for amino acids suggested that weak acidic background electrolyte offered better separation than the basic one. The proposed method was applied to the determination of biogenic amines in three different beer samples with satisfying recoveries varying from 92.8% to 104.8%. Finally, comparison of several fluorescein-based probes for amino compounds was discussed. With good labeling reaction, excellent photostability, pH-independent fluorescence (pH 4-9), and the resultant widely suited running buffer pH, SAMF has a great prospect in the determination of amino compounds in CE.     

Determination of agmatine in biological samples by capillary electrophoresis with optical fiber light-emitting-diode-induced fluorescence detection

A capillary electrophoresis (CE)/optical fiber light-emitting diode (LED)-induced fluorescence detection method is developed for the determination of agmatine in biological samples. The agmatine was precolumn-derivatized with fluorescence tagging reagent, fluorescein isothiocyanate (FITC). Optimal separation and determination for agmatine were obtained with an electrophoretic buffer of 20 mM sodium borate (pH 9.2). Under the optimal conditions, the determination of agmatine was achieved in less than 4 min, and the detection limit was 4.1x10(-9) M (S/N = 3). The relative standard deviation (RSD) for 11 parallel determination of agmatine was less than 3.0%. The present CE-LED induced fluorescence detection method has been applied to detect agmatine in rat brain tissue, rat stomach tissue, human serum, and human urine. The level of agmatine in human urine was quantified by CE for the first time and found to be in the range 2.5-4.1x10(-7) M.     

Analysis of benzalkonium chloride by capillary electrophoresis-tandem mass spectrometry

Conditions for the separation and determination of benzalkonium chloride (BAC) homologues by CE with UV-detection and CE coupled to MS (IT) using electrospray as ionization source were established. The separation was performed using fused-silica capillaries of 50 microm id and 100 mM acetic acid-ammonium acetate buffer solution at pH 4.5 with 80% of ACN as carrier electrolyte. CE-MS coupling parameters were optimized and methanol-10 mM acetic acid (90:10 v/v) was selected as sheath liquid. Detection limits, based on an S/N of 3:1, were calculated, and values between 0.8 and 1.3 mg/L with CE-ESI/MS and around 0.5 mg/L with CE-ESI-MS/MS, using hydrodynamic injection (15 s, 3.5 kPa), were obtained. Good run-to-run and day-to-day precisions on concentration were achieved with RSDs lower than 8%. Quantitative analysis was carried out by the internal standard method and the calibration curves showed good linearities (r(2) > 0.98). The CE-ESI-MS/MS method was successfully applied to the analysis of BAC in different ophthalmic solutions, allowing the direct determination, identification and confirmation of the BAC homologues presented in these samples.     

Determination of organic acids in air by capillary electrophoresis and ion-exclusion chromatography

Summary A capillary electrophoretic (CE) method for the determination of organic acids in the low ppm range is described. The buffer consisted of 5 mM 2,6-pyridinedicarboxylic acid and 0.5 mM cetyltrimethylammonium bromide, pH 5.6. The former served as background electrolyte for indirect UV detection at 200 nm, whereas the latter was used to reverse electroosmotic flow. In <5 min 8 low molecular mass organic acids (oxalic, formic, malonic, glutaric, glycolic, acetic, lactic and propanoic) and two inorganic acids (hydrochloric and sulphuric) were separated. Detection limits for anions tested were 0.04 mg L⁻¹ (lactic acid) to 0.6 mg L⁻¹ (malonic acid). The method was applied to the determination of organic acids in air samples. The CE results when compared with ion-exclusion chromatography (IEC) agreed well. The use of electrokinetic injection in CE proved beneficial for preconcentration of organic acids in real samples. Using electrokinetic injection, preconcentration factors ranging from 14 (hydrochloric acid) to 3 (propanoic acid) were obtained. Presented at Balaton Symposium on High-Performance Separation Methods, Siófok, Hungary, September 1–3, 1999     

Determination of phenylethanoid glycosides and iridoid glycosides from therapeutically used Plantago species by CE‐MEKC

CE methods are valuable tools for medicinal plant quality management, screening, and analysis. Therefore, the aim of the current study was to optimize and validate a CE‐MEKC method for simultaneous quantification of four chief bioactive metabolites from Plantago species. The two most important secondary metabolite groups were aimed to be separated. Different electrolyte and surfactant types were tested. Surfactant concentration, BGE pH, electrolyte concentration, and buffering capacity were optimized. The final BGE consisted of 15 mM sodium tetraborate, 20 mM TAPS, and 250 mM DOC at pH 8.50. Acceptable precision, good stability, and accuracy were achieved, with high resolution for phenylethanoid glycosides. Analytes were separated within 20 min. The method was shown to be suitable for the quantification of the iridoid glycosides aucubin and catalpol, and the phenylethanoid glycosides acteoside (verbascoside) and plantamajoside from water extracts of different samples. The method was shown to be applicable to leaf extracts of Plantago lanceolata, Plantago major, and Plantago asiatica, the main species with therapeutic applications, and a biotechnological product, plant tissue cultures (calli) of P. lanceolata. Baseline separation of the main constituents from minor peaks was achieved, regardless of the matrix type.     

Determination of chlorophenols in human urine based on the integration of on-line automated clean-up and preconcentration unit with micellar electrokinetic chromatography.

A new method was developed and validated for the determination of chlorophenols in human urine by using micellar electrokinetic chromatography (MEKC) coupled via a mechanic arm to an on-line automatic clean-up and preconcentration unit for urine samples. Separation is accomplished by using a selective buffer consisting of 15 mM borate, 25 mM phosphate and 100 mM sodium dodecyl sulfate (SDS) at pH 9.1 in addition to a positive power supply of 25 kV at 18 degrees C. The proposed capillary electrophoresis (CE) method allows the separation of 11 chlorophenols within 7 min with a reproducibility as relative standard deviation (RSD) between 2.6% and 7.2%, and limits of detection (LODs) between 0.08 and 0.46 microg/mL for all chlorophenols. Urine samples were previously hydrolyzed with 37% HCl at 80 degrees C for 60 min and then cleaned on a C-18 mini-column. Recoveries ranged from 58% to 103%. The preconcentration treatment affords limits of determination between 4 and 12 ng/mL for all chlorophenols except pentachlorophenol and 4-chlorophenol, which could not be determined. The overall analysis time, including on-line clean-up, preconcentration and electrophoretic separation is 20 min per sample.