Peculiarities of polyelectrolyte multilayer assembly on patterned surfaces

The layer-by-layer assembly of poly(diallyldimethylammonium chloride) and poly(sodium 4-styrenesulfonate) is studied on templates with imprinted arrays of microwells ranging from 2 to 25 μm and different aspect ratios. The thickness and microstructure of polyelectrolyte multilayers (PEMs) are measured using scanning electron microscopy. At 0.2 M ionic strength, the PEM film evenly coats the template both inside and outside the microwells. If the film is thinner than the critical value of about 400 nm, PEM microstructures collapse upon dissolving the template. Euler's model of critical stress is used to describe the collapse. At 2 M ionic strength, a substantially thinner PEM film is assembled inside the 25 μm wells than outside. If the well diameter is reduced to 7 and 2 μm, a much thicker PEM film is formed inside the microwells. These observations have been attributed to the changing of polyelectrolyte conformation in the solutions.     

Controlling mammalian cell interactions on patterned polyelectrolyte multilayer surfaces

A newly discovered class of cell resistant surfaces, specifically engineered polyelectrolyte multilayers, was patterned with varying densities of adhesion ligands to control attachment of mammalian cells and to study the effects of ligand density on cell activity. Cell adhesive patterns were created on cell resistant multilayer films composed of poly(acrylic acid) and polyacrylamide through polymer-on-polymer stamping of poly(allylamine hydrochloride) PAH and subsequent reaction of the amine functional groups with an adhesion ligand containing RGD (Arg-Gly-Asp). These cell patterns demonstrated great promise for long-term applications since they remained stable for over 1 month, unlike ethylene glycol functional surfaces. By changing the stamping conditions of PAH, it was possible to alter the number of available functional groups in the patterned regions, and as a result, control the ligand density. Cell spreading, morphology, and cytoskeletal organization were compared at four different RGD densities. The highest RGD density, approximately 152 000 molecules/microm2, was created by stamping PAH at a pH of 11.0. Lowering the stamping ink pH led to patterns with lower ligand surface densities (83 000 molecules/microm2 for pH 9.0, 53,000 molecules/ microm2 for pH 7.0, and 25 000 molecules/microm2 for pH 3.5). An increasing number of cells attached and spread as the RGD density of the patterns increased. In addition, more cells showed well-defined actin stress fibers and focal adhesions at higher levels of RGD density. Finally, we found that pattern geometry affected cytoskeletal protein organization. Well-formed focal adhesions and cell-spanning stress fibers were only found in cells on wider line patterns (at least 25 microm in width).     

Pervaporation separation of water/alcohol mixtures using composite membranes based on polyelectrolyte multilayer assemblies

Composite pervaporation membranes composed of an asymmetric polyamide-6 membrane and an ultrathin self-assembled polyelectrolyte separating layer are described. The supporting membrane was prepared from both an unmodified polyamide-6 and a comb-like polymer with carboxyl terminated polyamide-6 side chains. A high end group concentration was found to be advantageous for sufficient adhesion of the multilayer systems on the supports. Up to 20 layers were deposited onto the membrane surface by dipping the membranes in aqueous solutions containing oppositely charged polyelectrolytes. The polyanions used were poly(acrylic acid), poly(styrene sulfonic acid) and alginic acid. The polycations used were poly(diallyldimethylammoniumchloride), chitosan and poly(ethylenimine). Performance of these membranes depends strongly on the layer number and on the type of polyelectrolytes. In general, membranes modified with two weak polyelectrolytes of high charge density gave the best separation properties while those modified with strong polyelectrolytes of low charge density led to poorer separation properties. However, the highest separation factor (≥10,000) for a water/2-propanol mixture (12/88 w/w) at permeate flux of 300 g/m²h was obtained with six double layers consisting of poly(ethylenimine) and alginic acid. These composite membranes were stable over an operating period of at least 400 h.     

Functionalization of organic membranes by polyelectrolyte multilayer assemblies: application to the removal of copper ions from aqueous solutions

The functionalization of an organic polyethersulfone membrane (PES) was performed by alternating deposition of poly(allylamine hydrochloride) (PAH) and poly(sodium 4-styrene sulfonate) (PSS), leading to the formation of a polyelectrolyte multilayer film (PEM). The resulting assembly was characterized by tangential streaming potential measurements to determine the charge of the modified membranes as a function of the polyelectrolyte solution concentration and as a function of the immersion time of the membrane in the polyelectrolyte solutions. Then, the modified membranes were used to perform the ultrafiltration of aqueous solutions containing copper(II) ions. Different operating conditions were tested including: polyelectrolyte concentration, polyelectrolyte nature, thickness of the PEM film or pH of the Cu(2+) solutions. These filtration experiments demonstrated that it was possible to obtain a satisfactory retention of the copper ions (88%), thus proving that this type of assembly can be useful for the removal of copper ions from contaminated aqueous solutions.     

Metal ion-enriched polyelectrolyte complexes and their utilization in multilayer assembly and catalytic nanocomposite films

The mixing of Ag ion-doped poly(ethyleneimine) (PEI) and poly(acrylic acid) (PAA) produced Ag ion-doped polyelectrolyte complex particles (PECs) in solution. Positively charged Ag ion-doped PECs (Ag ion PECs) with a spherical shape were deposited alternatively with PAA to form a multilayer assembly. The multilayered film containing Ag ion PECs was reduced to generate a composite nanostructure. Metal nanoparticle (NP)-enriched nanocomposite films were formed by an additional process of the postadsorption of precursors on PECs within the nanocomposite films, which resulted in the enhancement of the catalytic and electrical properties of the composite films. Because the films contain PECs that are responsive to changes in pH and most of the NPs are embedded in the PECs, interesting catalytic properties, which are unexpected in a particle-type catalyst, were observed upon pH changes. As a result of the reversible structural changes of the films and the immobilization of the NPs within the films, the film-type catalysts showed enhanced performance and stability during catalytic reactions under various pH conditions, compared to particle-type catalysts.     

Layer-by-layer self-assembly of polyelectrolyte complexes and their multilayer films for pervaporation dehydration of isopropanol

Two negatively charged polyelectrolyte complex colloidal nanoparticles (PEC⁻) and one positively charged nanoparticle (PEC⁺) were prepared and used as novel layer-by-layer (LbL) building blocks. These PEC nanoparticles include poly(2-methacryloyloxy ethyl trimethylammonium chloride)/sodium carboxymethyl cellulose (PDMC/CMCNa PEC⁻), poly(diallyldimethylammonium chloride)/CMCNa (PDDA/CMCNa PEC⁻) and PDDA/poly(sodium-p-styrenesulfonate) (PDDA/PSS PEC⁺). LbL multilayer films based on (PEC⁺/PEC⁻) were constructed on both quartz slides and modified polyamide (MPA) reverse osmosis support membranes. UV–vis spectroscopy, quartz crystal microbalance (QCM), field emission scanning microscopy (FESEM) and atomic force microscopy (AFM) were utilized to follow the thickness growth and morphology evolution of these multilayer films with increasing bi-layer numbers. LbL multilayer films deposited on MPA support membranes were subjected to pervaporation dehydration of 10 wt% water–isopropanol and effect of bi-layer numbers and feed temperature on pervaporation performance was studied. Generally, PEC⁺/PEC⁻ can be LbL self-assembled successfully on both substrates with a thickness growth rate ca. 200 nm/bi-layer. Moreover, PEC⁺/PEC⁻ multilayer films show high pervaporation performance with film thickness up to several micrometers. For example, performance of the multilayer films in dehydrating 10 wt% water–isopropanol at 50 °C is J = 1.18 kg/m² h, α = 1013 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₄ and J = 1.36 kg/m² h, α = 938 for (PEC⁺/PDMC-CMCNa PEC⁻)₂₅, respectively.     

Layer-by-layer adsorption of polyelectrolyte and surfactant and adsorption of their complexes on solid surface

The capillary electrokinetics method (measurement of streaming potential and current in a capillary with a radius of 5–7 μm made of fused quartz) is employed to study the structure formation at interfaces between quartz and solutions containing a cationic polyelectrolyte (poly(diallyldimethylammonium chloride) with molecular mass M = 100000−200000) and an anionic surfactant (sodium dodecyl sulfate). The kinetics of surface layer formation is studied upon the layer-by-layer adsorption of the components and the adsorption of their complexes at the same component ratios. It is established that the formation time and the electrokinetic potentials of the surface layers are almost independent of the procedure of their formation. In the case of the layer-by-layer adsorption, the first layers of the polyelectrolyte appear to be virtually undeformed, thus indicating that molecules with a planar conformation prevail in the adsorption layer. Surfactant adsorption enhances the deformation (layer loosening), which decreases with time (layer aging). Layers formed from the complexes have a denser (less deformable) structure. Variations in the electrokinetic potentials of the layers during the long-term pumping of a background electrolyte solution through a capillary witnesses the prevailing desorption of the anionic surfactant, with the desorption being noticeably more pronounced for the layers resultant from the adsorption of the complexes.     

Controlling primary hepatocyte adhesion and spreading on protein-free polyelectrolyte multilayer films

The development of new methods for fabricating thin films that provide precise control of the three-dimensional topography and cell adhesion could lead to significant advances in the fields of tissue engineering and biosensors. This Communication describes the successful attachment and spreading of primary hepatocytes on polyelectrolyte multilayer (PEM) films without the use of adhesive proteins such as collagen or fibronectin. We demonstrate that the attachment and spreading of primary hepatocytes can be controlled using this layer-by-layer deposition of ionic polymers. In our study, we used synthetic polymers, namely poly(diallyldimethylammonium chloride) (PDAC) and sulfonated poly(styrene) (SPS) as the polycation and polyanion, respectively, to build the multilayers. Primary hepatocytes attached and spread preferentially on SPS surfaces over PDAC surfaces. SPS patterns were formed on PEM surfaces, either by microcontact printing of SPS onto PDAC surfaces or vice versa, to obtain patterns of primary hepatocytes. PEM is a useful technique for fabricating controlled co-cultures with specified cell-cell and cell-surface interactions on a protein-free environment, thus providing flexibility in designing cell-specific surfaces for tissue engineering applications.     

Kinetic aspects of polymer and polyelectrolyte adsorption on surfaces

The behavior of polymers adsorbed on a single surface or bridging two surfaces is fairly well understood when thermodynamic equilibrium conditions prevail. The work of Nobel prize winner, P.G. de Gennes, to whom the papers in this issue of Advances in Colloid and Interface Science are dedicated, has greatly contributed to this field. Useful as this knowledge is, in practise many situations are encountered in which polymer adsorption is not thermodynamically but kinetically controlled. In this paper we discuss various aspects of non-equilibrium polymer and polyelectrolyte adsorption, based on recent experimental findings. The discussion of these aspects is mainly qualitative, since we are still far from a detailed quantitative theory of the kinetics of polymer adsorption. Many of the examples are relevant to the chemistry of papermaking.     

The responses of preosteoblasts to collagen/hyaluronic acid polyelectrolyte multilayer coating on titanium

The purpose of this study was to investigate the effect of Collagen/hyaluronic acid (Col/HA) polyelectrolyte multilayer (PEM) coating on the behaviors and function of pre‐osteoblastic cells. Col/HA PEM coating was fabricated on acid etched Ti disc via layer‐by‐layer technique. The formation and properties of Col/HA PEM coating were investigated using scanning electron microscope (SEM), contact angle and quartz crystal microbalance (QCM). Moreover, mouse preosteoblasts were used to evaluate the effect of Col/HA PEM coating on cell behaviors and function. The results of in vitro evaluations showed that the Col/HA PEM coating could accelerate the proliferation and differentiation of preosteoblasts cells. Copyright © 2011 John Wiley & Sons, Ltd.     

Adsorption of Suwannee River fulvic acid on aluminum oxyhydroxide surfaces: an in situ ATR-FTIR study

The adsorption of Suwannee River fulvic acid (SRFA) on boehmite, gamma-AlO(OH), has been examined by both macroscopic adsorption and in situ ATR-FTIR spectroscopic techniques. At a SRFA concentration approaching surface saturation (F = 5.3 micromol m(-2)), adsorption is at a maximum at low pH and decreases as pH is increased. The ATR-FTIR spectral features of adsorbed SRFA are very similar to those measured approximately 1-2 pH units higher in solution, indicating that (i) the SRFA appears to be predominantly adsorbed at the boehmite/water interface in an outer-sphere complexation mode and (ii) the positively charged boehmite/water interface stabilizes SRFA molecules against protonation at low pH.     

Endothelial cell adhesion on polyelectrolyte multilayer films functionalised with fibronectin and collagen

The seeding of endothelial cells on biomaterial surfaces has become a major challenge to achieve better haemocompatibility of these surfaces. Multilayers of polyelectrolytes formed by the layerby-layer method are promising in this respect. In this study, the interactions of endothelial cells with multilayered polyelectrolytes films were investigated. The build-ups were prepared by selfassembled alternatively adsorbed polyanions and polycations functionalised with fibronectin and collagen. Anionic poly(sodium 4-styrenesulfonate) and cationic poly(allylamine hydrochloride) polyelectrolytes were chosen as a model system. Elaborated surfaces were characterised by electrochemical impedance spectroscopy and cyclic voltammetry. The modified electrode showed good reversible electrochemical properties and high stability in an electrolyte solution. The film ohmic resistance was highest when the film was coated with fibronectin; the parameters so determined were correlated with atomic force microscopy images. Cell colorimetric assay (WST-1) and immunofluorescence were used to quantify the cell viability and evaluate the adhesion properties. When cultured on a surface where proteins were deposited, cells adhered and proliferated better with fibronectin than with collagen. In addition, a high surface free energy was favourable to adhesion and proliferation (48.8 mJ m⁻² for fibronectin and 39.7 mJ m⁻² for collagen, respectively). Endothelial cells seeded on functionalised-polyelectrolyte multilayer films showed a good morphology and adhesion necessary for the development of a new endothelium.     

Effect of pH and salt on the stiffness of polyelectrolyte multilayer microcapsules

By using a combination of atomic force and confocal microscopy, we explore the effect of pH and salt on the stiffness of polyelectrolyte microcapsules with shells composed of strong polyanions and weak polycations. The stiffness of the capsules was found to be largest in water. It decreases slightly with added salt and gets much smaller both in acidic and in alkaline solutions. The moderate softening of the capsules in electrolyte solutions indicates that even high salt concentration does not significantly dissociate polyelectrolytes in the multilayer. The dramatic softening of the capsules at high pH probably reflects a decrease in the charge density of a polycation, which leads to a reduction in the number of ionic cross-links. In contrast, low stiffness of the capsules in acidic solutions seems to be connected mostly with the enhanced permeability of the multilayer shell.     

Clay and DOPA containing polyelectrolyte multilayer film for imparting anticorrosion properties to galvanized steel

A facile and green approach is developed to impart remarkable protection against corrosion to galvanized steel. A protecting multilayer film is formed by alternating the deposition of a polycation bearing catechol groups, used as corrosion inhibitors, with clay that induces barrier properties. This coating does not affect the esthetical aspect of the surface and does not release any toxic molecules in the environment.     

Adsorption of polyelectrolyte modified graphene to silica surfaces: monolayers and multilayers

Exfoliated graphene particles stabilised by the cationic polyelectrolyte polyethyleneimine (PEI) were used in conjunction with an anionic polyelectrolyte, poly(acrylic acid), to construct multilayers using the layer-by-layer technique on a silica substrate. In the first adsorption step, the surface excess of the cationic graphene was dependent on the overall charge on the nanoparticle which in turn can be tuned through modifying solution pH as PEI has weakly ionisable charged amine groups. The adsorbed amount onto the silica surface increased as the solution pH increased. Subsequently, a layer of PAA was adsorbed on top of the cationic graphene through electrostatic interaction. The multilayer could be assembled through this alternate deposition, with the influence of solution conditions investigated. The pH of the adsorbing solutions was the chief determinant of the overall adsorbed amounts, with more mass added at the elevated pH of 9 in comparison with pH 4. Atomic force microscopy confirmed that the graphene particles were adsorbed to the silica interface and that the surface coverage of the disc-like nanoparticles was complete after the deposition of five graphene-polyelectrolyte bi-layers. Furthermore, the graphene nanoparticles themselves could be modified through the consecutive addition of the oppositely charged polymers. A multilayered assembly of negatively charged graphene sheets modified with a bi-layer of PEI and PAA was also deposited on a silica surface with adsorbed PEI.     

Asymmetric static Fourier-spectrometer for solid surfaces and nano-films study

The optical scheme and functioning of a static Fourier-transform (FT) spectrometer employing surface electromagnetic waves (SEW) is discussed. SEW are excited by the probing radiation on the sample placed in one shoulder of the asymmetric interferometer. Interference pattern (interferogram) carrying information about the surface is registered by the detector array, disposed on the ellipse surface. This way of detectors positioning leads to linearization of the phase shift function on the pixels coordinates projection on the ellipse large axis. There are no moving parts in the instrument. That is why it can work as “one pulse spectrometer”. The length of SEW path determines the limiting spectral resolution, while time resolution depends on detector characteristics. The spectrometer provides the possibility of obtaining not only absorption (emission) spectra, but the spectra of complex refraction index as well.     

Scanning tunneling microscopy study of DNA-chromophore motif on solid surfaces

We focus our studies on DNA-chromophore motif on surfaces using samples prepared by the synthetic methods described by Wang and Li in a recent publication (J. Am. Chem. Soc. 2003, 125, 5248-5249). Scanning tunneling microscope (STM) was used to investigate the DNA-chromophore hybrids adsorbed on Au(111) and highly oriented pyrolytic graphite (HOPG) surfaces at room temperature in air. Experiments found that the DNA-chromophore hybrid molecules easily formed multimolecule aggregations on gold surface. On HOPG surfaces, however, DNA-chromophore hybrids were usually adsorbed as single molecules. STM images further showed DNA-chromophore hybrids adsorbed on Au(111) surfaces existed in the form of single molecule, dimer, trimer, tetramer, etc. The occurrence of molecular aggregations indicates that molecular interactions are comparable or stronger than molecule-substrate interactions; such weak interactions control the geometrical sizes and topographical shapes of the self-assembled DNA-chromophore hybrids on surfaces.     

Monte Carlo study of surfactant adsorption on heterogeneous solid surfaces

The equilibrium between free surfactant molecules in aqueous solution and adsorbed layers on structured solid surfaces is investigated by lattice Monte Carlo simulation. The solid surfaces are composed of hydrophilic and hydrophobic surface regions. The structures of the surfactant adsorbate above isolated surface domains and domains arranged in a checkerboard-like pattern are characterized. At the domain boundary, the adsorption layers display a different behavior for hydrophilic and hydrophobic surface domains. For the checkerboard-like surfaces, additional adsorption takes place at the boundaries between surface domains.