Application of High Temperature High Resolution Gas Chromatography to Crude Extracts of Propolis

The underivatized acetone and hexane fractions from propolis samples (predominant flora Citrus spp. and Vernonia polyanthes) were analyzed by HT-HRGC (high temperature high resolution gas chromatography) and HT-HRGC coupled to mass spectrometry (HT-HRGC-MS). Several compounds, including flavonoid aglycones, phenolic acids, and high molecular weight compounds were characterized in crude extracts by HT-HRGC-MS. HT-HRGC and HT-HRGC-MS were shown to be quick and informative tools for rapid analysis of crude extracts without need for prior derivatization and purification.     

High-temperature gas chromatography-mass spectrometry with glass capillary columns for the screening of natural products

High-temperature high resolution gas chromatography (HT-HRGC) and HT-HRGC coupled to mass spectrometry (HT-HRGC-MS) are powerful but relatively unexplored tools for the analysis of crude extracts and fractions of natural products. To illustrate the scope of the technique the direct characterization of several compounds, present in crude extracts of leaves and stems of Croton hemiargyreus Muell. Arg. var. hemiargyreus was undertaken, without derivatization or clean-up procedures. Both practical aspects and limitations of HT-HRGC and HT-HRGC-MS were evaluated resulting in a simple, straightforward and extremely powerful technique for the analysis of complex mixtures.     

High Refractive-Index Microspheres as Optical Cavity Structure

Microspheres of refractive index of n_D > 2.0 have been investigated. The organic-inorganic hybrid microspheres of n_D = 1.72 were prepared by the vibrating orifice technique using titanium-tetra-n-butoxide (TTBu) and diphenyldimethoxysilane (DPhDMS). For lasing demonstration, Eu³⁺-doped microspheres were prepared using europium (III) thenoyltrifluoroacetonate [Eu(TTFA)₃] as the dopant. The particles have good spherical shape, smooth surface and high optical transparency. The diameters of the particles could be controlled to within 0.1 m. Subsequent heating of the microspheres at 550°C under oxygen atmosphere resulted in an increase in the refractive index up to n_D = 2.6 with retention of the spherical shape. Resonant emission was confirmed from Eu^{3 +}-doped microspheres after heating at 400–550°C, by pumping with the 514.5 nm line of a CW- Ar⁺laser.     

高效液相色谱化学发光法检测牛奶中残留四环素类化合物的研究

基于四环素类抗生素药物中的四环素(TC)、土霉素(OTC)、金霉素(CTC)和多西环素(DC)能够强烈增敏通过恒电流电解方法在线电生BrO^－和鲁米诺之间产生的化学发光, 提出了一种高效液相色谱(HPLC)化学发光(CL)法检测4种四环素类抗生素药物的新方法. 以Nucleosil RP-C₁₈ (250 mm×4.6 mm, i.d., 5 μm, pore size, 100 Å)为色谱柱, 0.05 mol• L^－1磷酸二氢钾(pH 2.5)-乙腈(30∶70, V∶V)为流动相, 流速1.2 mL/min, 柱温25 ℃, 同时分离检测四种抗生素的总时间为11 min. 研究并优化了流动相、电生试剂化学发光检测的条件. 四种抗生素的检出限为0.002～0.008 μg•mL^－1 (3σ), 对0.01 μg•mL^－1的四种抗生素测定的相对标准偏差为2.0%～3.6% (n＝11). 该方法已成功应用于牛奶中残留四环素类抗生素含量的分析.     

High Energy Density Heteroatom (O,N and S) Enriched Activated Carbon for Rational Design of Symmetric Supercapacitors

Carbon-based symmetric supercapacitors (SCs) are known for their high power density and long cyclability, making them an ideal candidate for power sources in new-generation electronic devices. To boost their electrochemical performances, deriving activated carbon doped with heteroatoms such as N, O, and S are highly desirable for increasing the specific capacitance. In this regard, activated carbon (AC) self-doped with heteroatoms is directly derived from bio-waste (lima-bean shell) using different KOH activation processes. The heteroatom-enriched AC synthesized using a pretreated carbon-to-KOH ratio of 1:2 (ONS@AC-2) shows excellent surface morphology with a large surface area of 1508 m² g⁻¹. As an SC electrode material, the presence of heteroatoms (N and S) reduces the interfacial charge-transfer resistance and increases the ion-accessible surface area, which inherently provides additional pseudocapacitance. The ONS@AC-2 electrode attains a maximum specific capacitance (C_sp) of 342 F g⁻¹ at a specific current of 1 Ag⁻¹ in 1 m NaClO₄ electrolyte at the wide potential window of 1.8 V. Moreover, as symmetric SCs the ONS@AC-2 electrode delivers a maximum specific capacitance (C_sc) of 191 F g⁻¹ with a maximum specific energy of 21.48 Wh kg⁻¹ and high specific power of 14 000 W kg⁻¹ and excellent retention of its initial capacitance (98 %) even after 10000 charge/discharge cycles. In addition, a flexible supercapacitor fabricated utilizing ONS@AC-2 electrodes and a LiCl/polyvinyl alcohol (PVA)-based polymer electrolyte shows a maximum C_sc of 119 F g⁻¹ with considerable specific energy and power.     

High strength,high stiffness and toughness,defect-tolerant waterborne polyurethane with healing and antibacterial abilities

The nature creates many biomaterials such as spider silk which exhibits a combination of stiffness, strength and toughness. However, most of synthetic unfilled materials suffer from a trade-off between toughness and stiffness. Inspired by the structure of spider silk but beyond it, we proposed a novel molecular design to achieve transparent unfilled waterborne polyurethane (WPU) with simultaneously enhanced stiffness (280.9 MPa), tensile strength (25.1 MPa) and toughness (140.0 MJ/m³) as well as good elasticity (710%). The designed WPU comprised homogeneous continuous phase (soft segments) and diverse H-bonds (hard segments) dispersed in it. The increase of rigid molecular chain content and H-bonds contributed to the high stiffness of WPU. Furthermore, the mismatch of stiffness between hard domains and soft segments might promote crack deflection and branching, which endowed the robust WPU with fracture energy of 81.16 kJ/m². The robust WPU film could be healed to recover most of its original mechanical properties (strength for 24.4 MPa and elongation for 610%) under heating. In addition, the WPU films demonstrated good antibacterial performance against Staphylococcus aureus and Escherichia coli after chlorination.     

High molecular weight monodisperse polystyrene microspheres prepared by dispersion polymerization,using a novel bifunctional macromonomer

A novel bifunctional vinyl‐terminated polyurethane macromonomer was applied to the dispersion polymerization of styrene in ethanol. Monodisperse polystyrene (PS) microspheres were successfully obtained above 15 wt % of macromonomer relative to styrene. The steep slope from the reduction of the average particle size reveals that the macromonomer can efficiently stabilize higher surface area of the particles when compared with a conventional stabilizer, poly(N‐vinylpyrrolidone). The stable and monodisperse PS microspheres having the weight‐average diameter of 1.2 μm and a good uniformity of 1.01 were obtained with 20 wt % polyurethane macromonomer. The grafting ratio of the PS calculated from ¹H NMR spectra linearly increased up to 0.048 with 20 wt % of the macromonomer. In addition, the high molecular weights (501,300 g/mol) of PS with increased glass transition and enhanced thermal degradation temperature were obtained. Thus, these results suggest that the bifunctional vinyl‐terminated polyurethane macromonomer acts as a reactive stabilizer, which gives polyurethane‐grafted PS with a high molecular weight. © 2005 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 43: 3566–3573, 2005     

Ultraviolet Radiation in a High Mountain Lake of the Austrian Alps: Air and Underwater Measurements

Global UV radiation was measured with a portable multichannel filter radiometer at the surface and underwater in a high mountain lake (2417 m above sea level) of the Austrian Alps during 16 days in summer 1995. During this period, total column ozone values that changed only by 34 Dobson units explained a significant part of the variability in UVB radiation at 305 nm as indicated by the negative correlation with the ratio 305:340 nm (r_s= -0.810, P < 0.01). High radiation at the surface combined with high water transparency allowed substantial UVB radiation to reach the bottom of this lake. The diffuse attenuation coefficient for downward irradiance at 305 nm changed within 2 weeks from 0.24 m^-1 (10% at 9.6 m depth) to 0.32 m^-1 (10% at 7.2 m depth). This change in attenuation was related to the development of phytoplankton after the ice break-up as indicated by a six-fold increase in chlorophyll-a concentrations during this period. Our results suggest that phytoplankton and/ or phytoplankton-derived organic substances are important for the UV attenuation in this oligotrophic lake.     

Application of High Pressure-DTA for High Pressure-liquid Phase Epitaxy of Doped Mercury and Thallium HTS Formations

The fabrication method of superconducting thin films of compositions HgBa₂Ca₂Cu₃O_8+δ (Hg-1223) and Tl₂Ba₂CuO_y (2201) on single-crystalline SrTiO₃ and LaAlO₃ substrates is reported. The highest obtained T _c was 134 K and J _c over 10⁶ A cm^–2 at 77 K. High pressure DTA(HP-DTA) was applied to grow mercury- and thallium-based high-temperature superconducting crystals and thin films, to identify melting points of particular phases within these oxide systems and determine suitable processing conditions. The DTA system operates at the: maximum temperature of 1200°C, volume up to 5 cm³, working pressure up to 1.5 GPa and at a working atmosphere — inert gas with up to 25% oxygen. This revised version was published online in August 2006 with corrections to the Cover Date.     

Structure Engineering of BiSbSx Nanocrystals Embedded within Sulfurized Polyacrylonitrile Fibers for High Performance of Potassium-Ion Batteries

Potassium-ion batteries (PIBs) are regarded as promising candidates in next-generation energy storage technology; however, the electrode materials in PIBs are usually restricted by the shortcomings of large volume expansion and poor cycling stability stemming from a high resistance towards diffusion and insertion of large-sized K ions. In this study, BiSbS_x nanocrystals are rationally integrated with sulfurized polyacrylonitrile (SPAN) fibres through electrospinning technology with an annealing process. Such a unique structure, in which BiSbS_x nanocrystals are embedded inside the SPAN fibre, affords multiple binding sites and a short diffusion length for K⁺ to realize fast kinetics. In addition, the molecular structure of SPAN features robust chemical interactions for stationary diffluent discharge products. Thus, the electrode demonstrates a superior potassium storage performance with an excellent reversible capacity of 790 mAh g⁻¹ (at 0.1 A g⁻¹ after 50 cycles) and 472 mAh g⁻¹ (at 1 A g⁻¹ after 2000 cycles). It's one of the best performances for metal dichalcogenides anodes for PIBs to date. The unusual performance of the BiSbS_x@SPAN composite is attributed to the synergistic effects of the judicious nanostructure engineering of BiSbS_x nanocrystals as well as the chemical interaction and confinement of SPAN fibers.     

Detonation Properties of High Explosives Containing Ammonia Borane

Ammonia borane (AB) is used as a combustion agent to improve the properties of high explosives. The detonation velocity (D_v) and detonation pressure (P) of raw high explosives and of samples containing AB were calculated and compared. The detonation properties, impact sensitivities, thermal sensitivities, and thermal decomposition characteristics of high explosives containing AB were also measured. The results indicated that when the AB content was 20 wt‐%, the optimal detonation velocity and detonation pressure were achieved. Both the detonation velocity and detonation pressure of the high explosives containing AB were clearly increased compared with those of the raw high explosives. Moreover, the detonation velocities of high explosives containing AB were 7078 to 7423 m · s^–1 and their density ranged from 1.570 to 1.589 g · cm^–3. The detonation pressure ranged from 34.5 to 37 GPa and the average heat of detonation was 6688 J · g^–1. Furthermore, the impact and thermal sensitivities were 170 cm and 613 K, respectively, whereas a slight change occurred in the thermal decomposition characteristics. These results suggest that AB can serve as a powerful combustible agent in energetic materials and improve the detonation properties and sensitivities of high explosives.     

High Temperature Gas Chromatography with a Glass Capillary Column for the Analysis of High Molecular Weight Tracers in Smoke Samples from Biomass Burning

A custom-made glass capillary column coated with OV-1701-OH (88% methyl, 7% cyanopropyl, 5% phenylpolysiloxane) was used to analyze smoke samples from biomass combustion of different species of plants collected in the Amazon forest. CS₂ was used as solvent in order to enhance the dissolution and analysis of the heavier molecular weight components. The performance of the column was monitored during the experiments and a moderate increase in activity was observed after taking the column to high analytical temperatures (390°C). Trennzahl values typically dropped 20–30% from 1.7/m to the average of 1.35/m. In general, the performance of the custom-made column was satisfactory and comparable to the commercial high temperature columns. The high temperature high resolution GC and GC-MS analyses revealed the presence of a number of high molecular weight components reported to occur in smoke aerosols for the first time. These components consisted of series of wax esters (long chain alcohols esterified with long chain fatty acids) with up to 58 carbon numbers, aliphatic hydrocarbons, triglycerides, triterpenyl esters (e.g. α- and β-amyryl stearate). Although other types of compounds were also detected, their complete structure elucidation solely by electron impact MS was not adequate and other techniques will be required.     

植物中鱼藤酮类化合物检测方法的改进

 现有分析鱼藤酮的高效液相方法是针对鱼藤酮的检测而建立的 ,因此它不适合于鱼藤酮类化合物的分析检测。比较鱼藤酮类化合物的UV吸收光谱发现 ,原方法中的检测波长 (2 80nm～ 30 0nm)不适于鱼藤素、毛鱼藤酮及其类似物的检测。通过试验确定适合鱼藤酮类化合物的检测波长为 2 40nm。用CHCl3 MeOH(体积比 9∶1)溶剂提取出的植物中的鱼藤酮类化合物 ,经C18柱进行分离后 ,以MeOH H2 O(体积比 6 6∶34 )为洗脱剂对鱼藤酮类化合物进行等度洗脱。实验结果表明 ,改进的方法可一次性分离检测出鱼藤酮、鱼藤素、毛鱼藤酮及其 12a 羟基 和 6a ,12a 脱氢-类似物，各峰分离良好。     

Stability and degradation products of imipenem applying high‐resolution mass spectrometry: An analytical study focused on solutions for infusion

Carbapenems show recognized instability in aqueous solutions; therefore some care must be taken in their handling and preparation and their use in the hospital environment. The stability and degradation products of imipenem were investigated from conditions that simulate its clinical use. For this, a simple stability‐indicating method by HPLC‐DAD was validated with a focus on the quantitation of drug concentration remaining from infusion solutions (sodium chloride 0.9% and glucose 5%). The degradation products formed were identified by high‐resolution mass spectrometry (ESI‐Q‐TOF‐MS/MS), with detection of the [M + H]⁺ ions at m/z 318 (DP‐1), m/z 599 (DP‐2) and m/z 658 (DP‐3). The most probable elemental compositions were obtained with a high degree of confidence, where the error between the masses observed and calculated was 1.25 ppm for DP‐1, ?0.33 ppm for DP‐2 and 1.82 ppm for DP‐3. The DP‐1 degradation product resulted from cleavage of the β‐lactam ring; DP‐2 corresponded to the drug dimer; and DP‐3 was generated from the interaction between imipenem and cilastatin. The proposed method provides a safe and reliable alternative for the quantitation of imipenem, and the stability data obtained by ESI‐Q‐TOF help in understanding the drug behavior under the conditions of clinical use.     

基于生物质的高度有序的管状碳材料及其在锂硫电池中的应用

将棕榈纤维经过炭化和氢氧化钾活化制备高度有序的管状碳材料(OCT),并且将其应用于锂硫电池。所制备的OCT具备高的比表面积和大的孔体积,可以有效地储存硫,合成方法简单且成本较低。同时,所制备的S@OCT复合物呈现出优异的电化学性能。载硫量为65%(w/w)的S@OCT复合材料在0.2C(1C=1 672 mA·g-1)的倍率下库伦效率接近于100%,其首圈容量高达1 255.2 mAh·g-1(1.8 mAh·cm-2),并且100圈后容量保持在756.9 mAh·g-1(1.09 mAh·cm-2)。使用5C的大电流测试时,其首圈容量达到了649.1 mAh·g-1(0.93 mAh·cm-2),且在100圈后容量保持在504.2 mAh·g-1(0.72 mAh·cm-2)。     

Photosensitive polybenzoxazole based on a poly(o‐hydroxy amide), a dissolution inhibitor,and a photoacid generator

A positive‐type photosensitive polybenzoxazole (PSPBO), based on a poly(o‐hydroxy amide) (PHA), the dissolution inhibitor (DI) 9,9‐bis(4‐tert‐butoxycarbonyloxyphenyl)fluorene (t‐Boc BHF), and the photoacid generator (5‐propylsulfonyloxyimino‐5H‐thiophene‐2‐ylidene)‐(2‐methylphenyl)acetonitrile (PTMA), was developed. Several new tert‐butoxycarbonylated compounds as DIs for PSPBOs were prepared from phenolic compounds having a cardolike structure with di‐tert‐butyl dicarbonate in the presence of 4‐dimethylaminopyridine. Among them, t‐Boc BHF and 5,5′,6,6′‐tetra(tert‐butoxycarbonyl)‐3,3,3′,3′‐tetramethyl‐1,1′‐spirobiindane acted as excellent DIs, giving a large dissolution contrast between the exposed and unexposed areas in a 2.38 wt % tetramethylammonium hydroxide solution (TMAHaq)/5 wt % iso‐propanol (i‐PrOH). The dissolution behavior of this PSPBO system was studied in relation to the PTMA and t‐Boc BHF loadings and postexposure baking temperature. A PSPBO consisting of PHA (77 wt %), t‐Boc BHF (20 wt %), and PTMA (3 wt %) exhibited a sensitivity of 34 mJ/cm² and a contrast of 5.8 when exposed to 365‐nm light (i‐line) and developed with an aqueous alkaline developer, 2.38 wt % TMAHaq/5 wt % i‐PrOH. A clear, positive image with 6‐μm features and a 10‐μm‐thick pattern with high sensitivity and contrast was produced by contact printing and converted into polybenzoxazole patterns upon heating at 350 °C for 1 h. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 661–668, 2007     

NLO‐active maleimide copolymers with ­high glass transition temperatures

We synthesized some novel rigid NLO‐active maleimide copolymers bearing DR‐1 moieties ( PMPD , PHSD and PHND ). All copolymers exhibited high T_g's (190～197 °C), good solubilities for common solvents and excellent film‐forming properties. Dependence of film thickness on the d₃₃ value for the poled copolymer films induced by corona poling was investigated and it was demonstrated that in less than thickness of 0.3 µm decrease of the thickness gives rise to remarkable increase in the d₃₃ value. The poled copolymer films exhibited large d₃₃ values (270 × 10^?9 esu (film thickness 0.13 µm) for PMPD , 290 × 10^?9 esu (0.12 µm) for PHSD and 350 × 10^?9 esu (0.08 µm) for PHND ) as well as large r₃₃ values (51.0 pmV^?1 for PMPD and 60.4 pmV^?1 for PHND ) which are significantly large compared to the value of LiNbO₃ (31 pmV^?1) as a typical EO material. The d₃₃ values of the poled copolymers were kept constant even after standing 1000h at 80 °C, although a small decrease was observed at an initial stage. Further, the d₃₃ values did not change up to ca. 123 °C upon heating at the rate of 10 °C/min in all cases. Copyright © 2002 John Wiley & Sons, Ltd.     

Stressed Kinetics of Nanoemulsion Formulation Encapsulated Ropinirole with a Validated Ultra High Performance Liquid Chromatography–Synapt Mass Spectrometry (UPLC‐MS/MS ESI‐Q‐TOF)

A highly sensitive ultra high pressure liquid chromatography (UHPLC‐MSMS) method for estimation of ropinirole in rat brain homogenate and plasma has been validated. The method was successfully used for the degradation kinetics in different stress condition and regulated temperature. The chromatographic separation was achieved using isocratic mobile phase, consisting of acetonitrile–2mM ammoniumacetate (28:72 v/v; 0.25 mL min^?1). The mass spectrometer was operated in synapt mass spectrometry mode via positive electrospray ionization using the transitions m/z 260 → m/z 261 for ropinirole, and m/z 324.39 → m/z 262.161 as a parent ion of escitalopram (IS). The assay for ropinirole was linear over the range of 0.5–100 ng mL^?1 (r²; 0.999). The intra‐ and inter day precisions were less than 11.2% in terms of relative standard deviation (R.S.D.), and the accuracy was within ±6.4% in terms of relative error (RE). The mean extraction‐efficiency of QC samples (MQC, 8 ng/mL) was ≥80%. The lower limit of quantification (LLOQ) was 0.049 ng/mL where as lower limit of detection (LLOD) was 0.016 ng/mL. All the peaks of degradation were well resolved. The degradation kinetics of ropinirole, showed highest stability (t_1/2 256.66/h; t_0.9, 39.11/h) in acidic medium, lower stability in alkaline environment (t_1/2, 103.43/h; t_0.9, 15.76/h) and highly susceptible in oxidative environment (t_1/2, 21.58/h; t_0.9, 3.28/h). The applicability of this assay was demonstrated and successfully applied for pharmacokinetic profiling of ropinirole in Wister rat brain homogenate after intranasal administration.     

Determination of Baicalin by High Performance Liquid Chromatography Coupling with Flow Injection Chemiluminescence Detection

A new method for the determination of baicalin in Scutellariae Radix extract and its preparations by high performance liquid chromatography (HPLC) coupling with flow injection chemiluminescence detection (FIA‐CL) has been developed. The method was based on the chemiluminescence reaction of potassium permanganate with baicalin in nitric acid medium; the CL intensity can be enhanced by formaldehyde. In this study, the conditions of chemiluminescence and chromatography were examined, and the schematic diagram of the HPLC‐FIA‐CL analyzer was optimized. The analytes were separated on Hypersil RP‐C18 columns (100 × 4.6 mm, I.D., 5 μm) by equality elution with 47:53 (v/v) methanol‐0.3% phosphoric acid as a mobile phase at a flow rate of 0.8 mL·min^?1 and a column temperature of 40 °C. Under the optimum condition, the CL intensity was proportional to the concentration of baicalin over the range of 4.10 × 10^?7 ? 6.15 × 10^?5mol·L^?1. The limit of detection (S/N = 3) was 2.79 × 10^?7mol·L^?1 with the relative standard deviation 2.5% (Cs = 6.15 × 10^?6 mol·L^?1, n = 5). The method has been applied to the determination of baicalin in Scutellariae Radix extract and its preparations, and satisfactory results were obtained.