Vinyl polymerization-412: Polymerization of methyl methacrylate initiated by the system of polyethyleneglycol,copper(II) chloride and water

The polymerization of methyl methacrylate (MMA) was carried out with the system polyethyleneglycol (PEG), copper(II) chloride and water at 85°. The effects of the amount of each component on the conversion of MMA were studied. Some polymerization occurred even if copper(II) ion was not present. It is suggested that there were three reactions: (1) polymerization initiated by the complex of PEG, copper(II) ion and water, (2) polymerization by PEG in water, (3) in the water phase, inhibition by copper(II) ion. The polymerization proceeded through a radical mechanism.     

Vinyl Polymerization. 377. Polymerization of Methyl Methacrylate by the System of Lysozyme,Copper(II) Ion,and Water

The polymerization of methyl methacrylate (MMA) initiated by the system lysozyme, copper(II) chloride, and water was carried out. The effect of the amount of each component on the conversion of MMA was studied. The polymerization proceeded through a radical mechanism. Urea, known to be a denaturing agent for protein, was able to promote the polymerization. On addition of urea, it was found that the following three reactions took place: (1) promotion of the polymerization of MMA with lysozyme, Cu(II) ion, and water by the unfolding of the third structure of lysozyme, (2) polymerization initiated by urea and Cu(II) ion, (3) polymerization initiated by the S-S bonds of lysozyme and urea.     

“Living”/controlled free radical polymerization of MMA in the presence of cobalt(II) 2‐ethylhexanoate: A switch from RAFT to ATRP mechanism

A metal complex, cobalt(II) 2‐ethylhexanoate (CEH), was added to the system of thermal‐initiated reversible addition‐fragmentation chain transfer (RAFT) polymerization of methyl methacrylate (MMA) with 2‐cyanoprop‐2‐yl 1‐dithionaphthalate (CPDN) as the RAFT agent at 115 °C. The polymerization rate was remarkably enhanced in the presence of CEH in comparison with that in the absence of CEH, and the increase of the CPDN concentration also accelerated the rate of polymerization. The polymerization in the concurrence of CPDN and CEH demonstrated the characters of “living”/controlled free radical polymerization: the number‐average molecular weights (M_n) increasing linearly with monomer conversion, narrow molecular weight distributions (M_w/M_n) and obtained PMMA end‐capped with the CPDN moieties. Meanwhile, CEH can also accelerate the rate of RAFT polymerization of MMA using the PMMA as macro‐RAFT agent instead of CPDN. Similar polymerization profiles were obtained when copper (I) bromide (CuBr)/N,N,N′,N′′,N′′‐pentamethyldiethylenetriamine was used instead of CEH. Extensive experiments in the presence of butyl methacrylate, bis(cyclopentadienyl) cobalt(II) and cumyl dithionaphthalenoate were also conducted; similar results as those of MMA/CPDN/CEH system were obtained. A transition of the polymerization mechanism, from RAFT process without CEH addition to atom transfer radical polymerization in the presence of CEH, was possibly responsible for polymerization profiles. © 2007 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 45: 5722–5730, 2007     

STUDIES ON ORGANIC PEROXIDE/N, NDI (2-α-METHYL-ACRYLOYLOXY PROPYL)-PARA-TOLUIDINE BINARY SYSTEMS

The polymerization of methyl methacrylate (MMA) initiated by organic peroxide and polymerizable aromatic tertiary amine such as N, N-di (2-α-methylacryloyloxy propyl)-p-toluidine (MP)_2PT binary system has been studied. It was found that the (MP)_2PT promotes MMA polymerization, and the kinetics of MMA polymerization fits the radical polymerization rate equation. Based on the ESR studies and the end-group analysis the initiation mechanism is proposed.     

Reverse atom transfer radical polymerization of methyl methacrylate initiated by p‐chlorobenzenediazonium tetrafluoroborate

The controlled polymerization of methyl methacrylate (MMA) in bulk was initiated with p‐chlorobenzenediazonium tetrafluoroborate ( 1 ) and Cu(II) or Cu(I)/Cu(II)/N,N,N′,N″,N″‐pentamethyldietylene triamine (PMDETA) complex system at various temperatures (20, 60, and 90 °C). The proposed polymerization mechanism is based on the Meerwein‐type arylation reaction followed by a reverse atom transfer radical polymerization. In this mechanism, aryl radicals formed by the reaction with 1 and Cu(I) and/or PMDETA initiated the polymerization of MMA. The polymerization is controlled up to a molecular weight of 46,000 at 90 °C. Chain extension was carried out to confirm the controlled manner of the polymerization system. In all polymerization systems, the polydispersity index and initiator efficiency ranged from 1.10–1.57 to 0.10–0.21, respectively. © 2003 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 41: 2019–2025, 2003     

Catalytic Effect of Dimethylsulfoxide Complexes of Rh(III) and Ru(II) on the Polymerization of Vinyl Monomers Initiated by 2,2′-Azobisisobutyronitrile

Transition metal salts and complexes catalyze the polymerization of vinyl monomers in the presence or absence of 2,2′-azobisisobutyronitrile (AIBN). In this article the effect of some dimethyl sulfoxide complexes of Rh(III) and Ru(II) on the polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) initiated by AIBN is reported. The percentage conversion and the rate of polymerization of MMA and MA are found to increase rapidly with time. At the critical concentrations of the complexes, the percentage conversion and the rates of reaction are found to be higher than those with AIBN alone, which significantly proves their accelerating effect. At concentrations above and below that of the critical value, the percentage conversion and the rates of polymerization of MMA and MA are found to decrease from those with AIBN alone. The trend of the increase and decrease of the percentage conversion and the rate of reaction with both types of complexes are similar. The solvent used in the polymerization of MMA and MA is dimethylsulfoxide (DMSO) and the temperature of the reaction is 60°C. A precise mechanism for the catalytic reaction is suggested.     

Vinyl polymerization. CCCXXXIX. Effect of chain length of nylon 3 on the polymerization of methyl methacrylate initiated with the system of nylon 3, copper(II) ion,and water

It was found recently that the system of nylon 3, copper(II) ion, and water could initiate a radical polymerization of methyl methacrylate(MMA). In the present paper, the effect of average chain length of the molecules of nylon 3 on the rate of polymerization of MMA was studied. The rate increased with the chain length of nylon 3. This result was explained well by the fact that the shorter nylon 3 forms a complex with copper (II) ion more easily than longer nylon 3. It was assumed that the shorter nylon 3 fills three or four coordination sites of copper(II) ion and loses the ability to initiate the polymerization. The efficiency of grafting of MMA and the degree of polymerization of MMA homopolymer were independent of the chain length of nylon 3.     

Synthesis of Poly (methyl methacrylate)/Zinc Oxide Nanocomposite with Core-Shell Morphology by Atom Transfer Radical Polymerization

A method to prepare zinc oxide (ZnO) nanoparticles with a covalently bonded poly(methyl methacrylate) (PMMA) shell by surface initiated atom transfer radical polymerization (ATRP) was reported. First, the initiator for ATRP was covalently bonded onto the surface of zinc oxide nanoparticles through our novel method. Firstly, the surface of ZnO nanoparticle was treated with 3-aminopropyl triethoxysilane, a silane coupling agent, and then this functionalization nanoparticle was reacted with α-chloro phenyl acetyl chloride to prepare atom transfer radical polymerization macroinitiator. The metal-catalyzed radical polymerization of MMA with ZnOmacroinitiator was performed using a copper catalyst system to give the ZnO-based nanoparticles hybrids linking PMMA segments (poly (methyl methacrylate)/zinc oxide nanocomposite). These hybrid nanoparticles had an exceptionally good dispersability in organic solvents and were subjected to detailed characterization using FTIR, TEM and TGA and DSC analyzed.     

Effect of Rh(III) and Ru(II) complexes in the polymerization of vinyl monomers initiated by charge transfer mechanism

The initiation of polymerization of vinyl monomers such as methyl methacrylate (MMA) and methyl acrylate (MA) by a charge transfer complex formed between n-butylamine(nBA) and carbon tetrachloride (CCl₄) in dimethylsulfoxide (DMSO) at 30°C is slow. The effect of the dimethylsulfoxide complexes of Rh(III) and Ru(II) on the polymerization of MMA and MA in the presence of nBA, and CCl₄ in DMSO has been studied. The rate of polymerization and percent conversion of the MMA and MA at 30°C are evaluated at the critical concentration of the metal complexes. At the critical range of the metal complex concentrations, both R_p, and percent conversion of MMA and MA were found to be highest. However, above and below the critical concentrations, R_p and percent conversion of the monomers were found to decrease. A suitable mechanism for the polymerization has been proposed.     

Cu~(2+)离子浓度对Cu~(2+)-Na_2SO_3体系引发甲基丙烯酸甲酯聚合机理的影响

<正> 氧化还原体系引发乙烯类单体自由基聚合过程中,氧化剂或还原剂浓度的变化可能引起聚合机理的改变,Reddy等研究“铜(Ⅱ)——维生素C-氧”体系引发甲基丙烯酸甲酯的自由基聚合时,发现随着Cu~(2+)离子浓度增加,聚合速度由上升至下降;单体反应级数从3/2增至2.0,我们在空气气氛下,对Cu~(2+)-Na_2SO_3体系引发甲基丙烯酸甲酯聚合进行了研究,亦发现Cu~(2+)离子浓度对聚合速度和聚合机理有很大影响,在较低的Cu~(2+)离子浓     

Low-temperature radiation-assisted polymerization and the nature of active site in the methyl methacrylate-silica system

Differential scanning calorimetry and EPR and IR spectroscopies were used to study the low-temperature postradiation polymerization of methyl methacrylate (MMA) sorbed on a microporous glass (SiO₂). Sorbed MMA was found to exhibit an enhanced tendency to polymerize within a temperature range of 160–250 K. At a preliminary irradiation dose of 10 kGy, the degree of conversion of the monomer was 100%, with the fraction of homopolymer formed being within 18%. The radiation-chemical yield of radicals in the SiO₂-MMA system at 77 K was estimated at G = 53–55 per 100 eV. The paramagnetic centers formed during the low-temperature (77 K) radiolysis of SiO₂ and MMA were demonstrated to be of ionic and radical natures. The polymerization of sorbed MMA via the radical growth of polymer chains was largely initiated by ions. That the polymer synthesized forms a chemical bond with the support was demonstrated using IR spectroscopy.     

A new tetradentate ligand for atom transfer radical polymerization

The properties of a ligand, including molecular structure and substituents, strongly affect the catalyst activity and control of the polymerization in atom transfer radical polymerization (ATRP). A new tetradentate ligand, N,N′‐bis(pyridin‐2‐ylmethyl‐3‐hexoxo‐3‐oxopropyl)ethane‐1,2‐diamine (BPED) was synthesized and examined as the ligand of copper halide for ATRP of styrene (St), methyl acrylate (MA), and methyl methacrylate (MMA), and compared with other analogous linear tetrdendate ligands. The BPED ligand was found to significantly promote the activation reaction: the CuBr/BPED complex reacted with the initiators so fast that a large amount of Cu(II)Br₂/BPED was produced and thus the polymerizations were slow for all the monomers. The reaction of CuCl/BPED with the initiator was also fast, but by reducing the catalyst concentration or adding CuCl₂, the activation reaction could be slowed to establish the equilibrium of ATRP for a well‐controlled living polymerization of MA. CuCl/BPED was found very active for the polymerization of MA. For example, 10 mol% of the catalyst relatively to the initiator was sufficient to mediate a living polymerization of MA. The CuCl/BPED, however, could not catalyze a living polymerization of MMA because the resulting CuCl₂/BPED could not deactivate the growing radicals. The effects of the ligand structures on the catalysis of ATRP are also discussed. © 2004 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 42: 3553–3562, 2004     

The nature of Cu(II) species in ATRP: New insights via EPR

Identification of the paramagnetic species present in the Cu(I)Br‐catalyzed atom transfer radical polymerization (ATRP) of a model monomer (isobornyl acrylate) has been carried out by electron paramagnetic resonance (EPR) in the continuous wave mode at 90 K. Up to five different species—four copper‐based species and one organic radical—were detected with this technique. The EPR parameters of the copper‐based species are found to differ strongly, and originate from diverse isolated Cu(II) complexes, as well as dipolarly interacting and even exchange‐coupled Cu(II) species. The work highlights the complexity of the copper‐based EPR signal observed in copper‐mediated ATRP reactions. Analysis of the time evolution of the individual EPR contributions reveals the disadvantages of quantitative kinetics studies based on the summed EPR intensity of all copper‐based species, as is commonly used in literature for this type of reactions. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1493–1501, 2010     

Mechanism of Charge Transfer Initiation by the Dimethyl Phenyl Phosphine/Fe(III) Catalyst System

The dimethyl phenyl phosphine (DMPP) initiated polymerization of methyl methacrylate (MMA) in dimethylsulfoxide was studied. Polymerization of MMA in this system required the presence of transition metal ions like Fe³⁺ or Cu²⁺. Kinetic studies showed that the propagation was free radical in nature. An interaction between DMPP and MMA was detected spectrophotometrically. A proposed mechanism involves a transition metal ion-activated dipole interaction between the carbonyl oxygen and the phosphorus atom with the ultimate formation of a methyl methacrylate type of free radical.     

Bis(β‐ketoamino)copper(II)/methylaluminoxane systems for homo‐ and copolymerizations of methyl acrylate and 1‐hexene

Two bis(β‐ketoamino)copper [ArNC(CH₃)CHC(CH₃)O]₂Cu ( 1 , Ar = 2,6‐dimethylphenyl; 2 , Ar = 2,6‐diisopropylphenyl) complexes were synthesized and characterized. Homo‐ and copolymerizations of methyl acrylate (MA) and 1‐hexene with bis(β‐ketoamino)copper(II) complexes activated with methylaluminoxane (MAO) were investigated in detail. MA was polymerized in high conversion (>72%) to produce the syndio‐rich atactic poly(methyl acrylate), but 1‐hexene was not polymerized with copper complexes/MAO. Copolymerizations of MA and 1‐hexene with 1 , 2 /MAO produced acrylate‐enriched copolymers (MA > 80%) with isolated hexenes in the backbone. The calculation of reactivity ratios showed that r(MA) is 8.47 and r(hexene) is near to 0 determined by a Fineman‐Ross method. The polymerization mechanism was discussed, and an insertion‐triggered radical mechanism was also proposed. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 48: 1113–1121, 2010     

Cyclodextrins in polymer synthesis: polymerization of methyl methacrylate under atom‐transfer conditions (ATRP) in aqueous solution

Host guest complexes of methyl methacrylate (MMA) and randomly methylated β‐cyclodextrin (m‐β‐CD, 1 a ) were polymerized in aqueous medium using atom‐transfer radical polymerization. Ethyl 2‐bromoisobutyrate (EBIB) was used as an initiator, copper(I) bromide as the catalyst, and bipyridine (bipy) or 4,4′‐di‐(5‐nonyl)‐2,2´‐bipyridine (dNbipy) as ligands. The unthreading of m‐β‐CD during the polymerization led to water‐insoluble poly(methyl methacrylate) (PMMA). It was found that using dNbipy resulted in higher monomer conversion than using bipy as the ligand under similar conditions. Furthermore, it is shown that the polymerization of MMA under these conditions has a living character. The polymers obtained have a much lower polydispersity than those obtained from conventional free‐radical polymerization. Also, the block copolymerization of PMMA bearing a bromoester end group with CD‐complexed styrene ( 2 a ) was carried out under ATRP conditions in aqueous medium.     

Vinyl Polymerization by Metal Complexes. XXXIII. Polymerization of Acrylonitrile Initiated by Triazole-Copper(II) Complex in Dimethylsulfoxide Solution

Polymerization of acrylonitrile initiated by triazole-copper(II) complexes was studied in dimethylsulfoxide solution. It was found that the polymerization proceeds by a free radical mechanism; however, the complexes can hardly homopolymerize methyl methacrylate and styrene. Ability of the complexes to initiate polymerization seems to depend on the substituents of triazole, the sort of solvents, and the counterions of copper(n) salts. From the data of visible spectroscopy and the spin trapping, the initiation mechanism was discussed in terms of reduction of copper(II) followed by forming active species.     

Vinyl Polymerization. 386. Polymerization of Methyl Methacrylate Initiated by Imidazole in Aqueous Solution of Copper(II) Chloride

The radical polymerization of methyl methacrylate (MMA) was carried out with the system of imidazole (Im), copper(n) chloride, and water at 85°C. The effects of the amount of each component on the conversion of MMA were investigated. The polymerization proceeded through a radical mechanism. The overall activation energy was estimated to be 28.7 kJ/mole. The conversion of MMA showed a maximum at pH 8-9 of the aqueous solution. The formation of a complex of CuCl₂ with Im, water, and MMA was confirmed by electronic spectra. An initiation mechanism was proposed.     

A comparative analysis of SET‐LRP of MA in solvents mediating different degrees of disproportionation of Cu(I)Br

Cu(I)Br/Me₆‐TREN species are unstable and disproportionate into metallic Cu(0) and Cu(II)Br₂/Me₆‐TREN in DMSO, whereas in toluene are stable and do not undergo disproportionation, at least at 25 °C. To estimate the role of the disproportionating solvent in single electron‐transfer living radical polymerization (SET‐LRP) a comparative analysis of Cu(0)/Me₆‐TREN‐catalyzed polymerization of MA initiated with methyl 2‐bromopropionate at 25 °C was performed in DMSO and toluene. A combination of kinetic experiments and chain end analysis by 500‐MHz ¹H NMR spectroscopy was used to demonstrate that disproportionation represents the crucial requirement for a successful SET‐LRP of MA at 25 °C. In DMSO a perfect SET‐LRP occurs and yields close to 100% conversion in 45 min. A first order polymerization in growing species up to 100% conversion and a PMA with perfectly functional chain ends are obtained. However, in toluene within 17 h only about 60% conversion is obtained, the polymerization does not show first order in growing species and therefore is not a living polymerization. Moreover, at 60% conversion the resulting PMA has only 80% active chain ends. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 6880–6895, 2008